Skip to main content

v16.7

リリース日

2026年11月3日

不具合修正

プロジェクト

  • 「Failed to start Rserve daemon. (Could not find process.)」というエラーが繰り返し記録されてプロジェクトを開く、または作成することができない不具合を修正しました。

v16.6

リリース日

2026年10月16日

不具合修正

データ加工

  • v16.5にアップグレードした後、結合(列を追加する / Join)のステップで、結合先のデータフレームが存在するにもかかわらず「参照先が見つからない: 参照されたデータフレームまたはブランチがありません。」というエラーが発生し、結合先データフレームの列が無効になる不具合を修正しました。

v16.5

リリース日

2026年10月15日

機能強化

AIデータ

  • AIデータにおけるMySQLのデータ取得を強化し、「2023-Q1」などの文字列で表された四半期の列を自動的に検出して日付型に変換するようにしました。手動でのデータ型変換を行うことなく、時系列分析や日付フィルタリングを直接実行できるようになり、データ準備のワークフローが効率化されます。

データソース

  • スキーマ一覧ダイアログを再設計し、スキーマ一覧に明確な境界線を追加するとともに、ダイアログの高さを拡張しました。

データ加工

  • 区切り文字として「タブ」を選択した際、CSVエクスポートの拡張子がデフォルトで「.tsv」になるよう更新しました(または明示的なTSVオプションを提供)。適切な拡張子を持つタブ区切りファイルを即座にエクスポートできるようになり、後続のアプリケーションでのインポートエラーや手動でのファイル名変更の手間が解消されます。

チャート

  • 画像エクスポート機能を強化しました。デフォルト設定を「現在の比率」に変更し、4:3や16:9などの標準プリセットを追加しました。また、手動でリサイズした際に「カスタム」へ自動切り替えする機能、歪みを防ぐためのチャート再描画機能、プレビューの追加、およびユーザー設定の保持に対応しました。

ダッシュボード

  • チャート、アナリティクス、ダッシュボード、およびデータフレームのホバープレビューにおいて、サムネイルのアスペクト比を16:9に標準化し、キャプチャ処理を更新しました。これにより、アプリケーション全体で一貫性のある、端が切れていないモダンなプレビュー画像が表示されるようになります。

ノート

  • リンク挿入ダイアログのスタイルを再設計し、入力フィールドの配置とサイズを調整しました。

不具合修正

AIデータ

  • AIデータにおいて、データのインポートを試みた際に、以前のセッションの会話履歴が新しく作成されたセッションに混入してしまう不具合を修正しました。
  • AIデータにおいて、バージョンを切り替えた際に右上の「実行」ボタンが有効化されない不具合を修正しました。
  • AIデータでのPDFデータ抽出において、doclingがPython 3.11以上を要求せず、互換性のないPythonバージョン(Python 3.9など)を検出して失敗してしまう不具合を修正しました。
  • AIデータでPDFファイルから抽出されたテーブルが、1行に1つの観測値を持つタイディ(整然)データに整形されず、元のレイアウトのまま保持されてしまう不具合を修正しました。これにより、データを適切に再構成するためにユーザーが追加の指示を手動で出す必要がありました。

データソース

  • データベース接続の「スキーマ情報の保存」ダイアログにおいて、特定のスキーマ内のテーブルを選択すると、他のスキーマにある同名のテーブルまで選択・保存されてしまう不具合を修正しました。
  • MySQL接続のスキーマ情報を保存する際、タイムアウト後に「操作が中止されました(operation was aborted)」エラーが発生して失敗する不具合を修正しました。
  • スキーマ情報ファイルでデータベースとスキーマの階層構造が維持されず、異なるスキーマ間で同名のテーブルが区別されずに競合してしまう不具合を修正しました。

データ加工

  • ステップを折りたたんでいる際、エクスポートのドロップダウンメニューが誤った位置に表示される不具合を修正しました。ステップが表示されている場合のみ正しくレンダリングされていました。

チャート

  • 過去のデータ加工ステップで参照先のデータフレームや列名が変更または削除された場合、複数メジャー設定でのチャート描画時に「オブジェクトが見つかりません(object not found)」エラーが発生し、チャートの可視化プレビューが失敗する不具合を修正しました。
  • 「表示エリアに合わせる」に設定されたピボットテーブルにおいて、ドラッグ&ドロップで列幅を変更すると固定ピクセル幅が適用され、テーブルの幅が100%を超えてしまう不具合を修正しました。
  • ピボットテーブルにおいて、ドラッグ&ドロップで手動調整した列幅が恒久的に保存され、「表示エリアに合わせる」や「列ヘッダのテキストに合わせる」といった幅設定が適用されなくなる不具合を修正しました。
  • ピボットテーブルに列フィールドが割り当てられ、デフォルトの列幅設定が使用されている場合、垂直スクロールバーが2重に表示される不具合を修正しました。また、水平スクロールバーが画面上に表示されたままにならず、コンテンツの最下部に隠れてしまう問題も修正しました。

ダッシュボード

  • ダッシュボードの初回レンダリング時、同じ行に通常の数値チャートとリピート(繰り返し)設定の数値チャートが配置されていると、行の右側に小さな空白が表示されてしまう不具合を修正しました。
  • ダッシュボードの編集モードにおいて、選択したチャートの枠線をドラッグして移動する際、元の位置に選択枠のアウトラインが残ってしまう不具合を修正しました。ドラッグ操作中にこの残像枠が表示されたままになっていました。
  • ダッシュボードで新しいページを追加した後、ダッシュボードを実行するまで、ページ設定ダイアログにタブ位置の設定オプションが表示されない不具合を修正しました。
  • チャート上のドラッグハンドルをクリックしてドラッグした際、個別のチャートや数値チャートだけでなく、行全体が移動してしまう不具合を修正しました。

プロジェクト

  • 検索インデックスの行を更新または削除する際、古い互換性のないSQLiteスキーマバージョンが適切に再作成されずに残っていたため、「cannot DELETE from contentless fts5 table」エラーが発生する不具合を修正しました。これにより、通常のデータフレーム操作中にプロジェクトの検索インデックスが更新できなくなっていました。
  • SQLite FTS設定の破損または不整合により、データフレームの検索インデックスを更新する際に「delete may not be used with a contentless_delete=1」エラーが発生する不具合を修正しました。これにより、内部検索インデックスのクリーンアップ中にデータフレーム操作が失敗していました。
  • ステップや列を変更する際、データフレームの検索インデックス更新が「cannot DELETE from contentless fts5 table」エラーで失敗する不具合を修正しました。この問題は、コンテンツレスFTS5テーブルからの行削除を妨げる内部インデックス状態の不整合によって発生していました。

v16.4

リリース日

2026年10月13日

機能強化

AIデータ

  • AIデータの接続設定フローを変更し、接続情報の入力が必要なときは、チャットウィンドウ内の「接続」ボタンを明示的にクリックしたときのみ設定ダイアログが開くようにしました。

サマリビュー

  • データインポート時に、サマリビューとテーブルビューのどちらを初期表示にするかを選択できるデフォルト・ビュー設定を追加しました。大規模なデータセットをインポートする際、要約統計量の計算を待たずにテーブルビューですぐに作業を開始できるようになり、応答性が向上しました。

データソース

  • CSV: ヘッダー行とデータ行の間で列数の不一致を検出し、CSVインポート時の動作を改善しました。末尾の列が自動的に結合されてしまう代わりに、警告が表示されるか、不足している列名が自動補完されるようになりました。
  • Excel: Excelインポートダイアログのドロップダウンメニューから、列を直接hms(時間)データ型に変換できるオプションを追加しました。ファイルをCSVに変換することなく、インポート時に時間型を設定できるようになりました。
  • FRED: Exploratoryの内蔵サポートAPIキーを利用するFREDデータソース用の「デフォルト」接続オプションを追加しました。独自のFRED APIキーを持っていないユーザーでも、追加設定なしですぐにFREDデータにアクセスして分析できるようになりました。
  • MySQL: MariaDBおよびMySQLデータソースのSSL接続をサポートしました。SSL暗号化を使用してデータベースに安全に接続できるようになり、組織の厳格なセキュリティ要件に準拠できるようになりました。

データ加工

  • ステップダイアグラム: ステップダイアグラムにエクスポート機能を追加し、ワークフロー図を画像やファイルとして保存・共有できるようになりました。
  • ステップダイアグラム: ステップダイアグラムにおける矢印の接続パスとボックスの配置を改善しました。特に結合操作や分離されたデータフレーム周辺の表示が向上しています。
  • ステップダイアグラム: ステップダイアグラムの初期ズームアルゴリズムを改善し、選択したステップの周囲のステップがより多く表示される、見やすいズームレベルで開くようにしました。毎回手動で縮小操作を行うことなく、ワークフロー全体の文脈を即座に把握できるようになりました。
  • ピボットステップで、SUM_IF、SUM_IF_RATIO、COUNT_IF、COUNT_IF_RATIO、COUNT_UNIQUE_IF_RATIO関数をサポートしました。チャートのピボットテーブルと同等の条件付き集計比率を、データ加工ステップ内で直接計算できるようになりました。
  • 列の結合(マージ): 列名によるマッチングか、列の位置によるマッチングかを選択できる「マージ方法」ドロップダウンを追加しました。
  • テキスト加工: テキスト加工において、漢数字をアラビア数字に変換する際に、既存のアラビア数字をそのまま保持するオプションを追加しました。数字と文字が混在する列で既存の数値を欠損値(NA)に変換することなく保持できるようになり、日本語テキスト処理が効率化されました。
  • エクスポート: .rdaおよび.rdataファイル形式でのデータエクスポートに対応しました。ファイルサイズの制限やフォーマットの非互換性に悩まされることなく、Exploratoryから大規模なデータセットを簡単にエクスポートし、RやTableauなどにインポートできるようになりました。

チャート

  • ピボットテーブル: ピボットテーブルに「最頻値の割合」の計算オプションを追加しました。各サブグループ内で最も頻出する値の割合を計算できるようになりました。
  • ピボットテーブル / チャート: 「繰り返し」機能を使用する際、分割されたカテゴリ別のテーブルやチャートと並べて、全体の合計テーブルやチャートを表示できるようになりました。別の集計テーブルやチャートを作成することなく、データセット全体に対するサブグループの内訳を比較できるようになりました。
  • ピボットテーブル: ピボットテーブルで複数の列が選択されている場合でも、自動計算された列幅より狭く調整できるようになりました。限られた表示領域に合わせて、コンパクトにカスタマイズされたテーブルレイアウトを作成できます。
  • ピボットテーブル: ピボットテーブルおよび集計テーブルで複数の値を使用している場合に、特定の指標に対してのみ行の合計を非表示にする機能を追加しました。意味のある件数や列の合計を維持しながら、集計パーセンテージのような意味を持たない行の合計を非表示にできるようになりました。
  • ピボットテーブル: ピボットテーブルの列フォーマットで利用可能な日付フォーマットパターンを、ラインチャートなどの他のチャートと統一しました。
  • ピボットテーブル: チャート上で設定したカスタムの合計表示位置を保持したままエクスポートできるように、ピボットテーブルのエクスポート機能を更新しました。行の合計を上部に、列の合計を左側に配置した状態のままテーブルを出力できます。
  • ピボットテーブル: Net Promoter Score(NPS、顧客推奨度)を直接計算できる専用メニューオプションを追加しました。推奨者と批判者の割合を手動で集計することなく、1つの選択操作でNPSを算出できるようになり、アンケート分析が大幅に簡素化されました。
  • ピボットテーブルの各列階層に対して、テキストの配置(配置位置)を個別に設定できるようになりました。複数の列レベルにわたってヘッダーとデータセルの配置を独立して調整できるようになり、テーブルの視認性とプレゼンテーション品質が向上しました。
  • ナンバー: ナンバーチャートにおけるサブ指標行の背景色をカスタマイズできるようになりました。
  • ナンバー: 最初のタイルだけでなく、表示されているすべての繰り返しタイルを表示するように、ナンバーチャートのサムネイル生成処理を更新しました。
  • ナンバー: 「繰り返し」機能で「複数変数」オプションを使用している場合に、ナンバータイルの並び替え(ソート)に対応しました。値やタイトルテキストでタイルを並び替えることができるようになり、データの比較分析がより明確かつ容易になりました。
  • ナンバー: ナンバーチャートの条件付き書式とサブ指標において、カスタムカラーパレットを使用できるようになりました。
  • 箱ヒゲ図: t検定やウィルコクソン検定のp値などの統計的検定結果を、箱ヒゲ図上に直接表示できるようになりました。1つのチャート内で、分布と統計的に有意な差を同時に可視化できます。
  • 散布図: 散布図の「形状」に列を割り当て、三角形やひし形などの異なるマーカーを使用できるようになりました。色やサイズに加えて固有のマーカー形状でカテゴリディメンションを可視化できるようになり、多次元データの探索がより豊かになりました。
  • 散布図: 散布図のマーカーメニュー内にジッター(散布のばらつき)設定を直接配置しました。
  • トレンドライン: トレンドラインの種類のドロップダウンメニューを、説明ツールチップを備えた構造化されたセクション(標準、専用、数式ベース)に再設計しました。各トレンドモデルの統計的な目的を迅速に理解し、適切なラインの種類を容易に選択できるようになりました。
  • トレンドライン: マウス位置に応じた動的な値と、モデルレベルの統計指標を明確に分離するように、トレンドラインのホバーツールチップを再設計しました。
  • トレンドライン: トレンドラインのホバーツールチップにおける数値フォーマットを標準化し、通常の指標は小数点以下2桁、p値は小数点以下3桁に統一しました。すべてのトレンドラインで一貫性のある明確な統計指標を確認できるようになりました。
  • リファレンスライン: リファレンスラインおよびトレンドラインの基準データ範囲に「直近N」(年、四半期、月、週、日)オプションを追加しました。
  • リファレンスライン: バーチャートのリファレンスラインにサークル(円)スタイルオプションを追加しました。グループ化されたバーをまたいで基準データポイントを個別のドットとして表示できるようになり、ベンチマークの視認性とデザインの柔軟性が向上しました。
  • 繰り返し: 「繰り返し」のラベルを各チャートの下部ではなく上部に表示するオプションを追加しました。複数のチャートを比較する際に、繰り返しラベルを上部に配置することで、視認性と視覚的階層を改善できるようになりました。
  • 繰り返し: スタックバーチャートおよび繰り返しチャートにおいて、個々のグループの内訳と並べて「合計」バーまたはチャートを表示できるようになりました。全体のパフォーマンスとグループごとの貢献度を1つのビューで同時に評価できます。
  • 詳細を表示: 「詳細を表示」ダイアログのテーブル内で、ドラッグ&ドロップによる列幅のリサイズを可能にしました。
  • 詳細を表示: チャートおよびパブリッシュされた出力全体の「詳細を表示」ダイアログに列の選択機能を追加しました。対象読者に見せたい列のみを選択して表示できるようになり、機密性の高い列を選択的に非表示にしてプライバシーを保護し、不要な列による乱雑さを排除できるようになりました。
  • バーチャート: バーチャートのY軸において、ウェイト(重み付け)に基づく集計をサポートしました。ウェイト列を選択し、加重件数や加重平均をバーチャート内で直接計算できるようになり、母集団のウェイトに合わせて調整されたアンケートデータの可視化が容易になりました。
  • バーチャート: バーチャート上にデータラベルを表示する際、自動コントラストオプションを追加しました。バーの明るさに基づいて白または暗い色のテキストが自動的に選択されます。
  • ラインチャート: ラインチャートの各ラインに対してマーカーと形状をカスタマイズできる機能を追加しました。白黒印刷時でもラインを効果的に判別できるようになり、アクセシビリティとチャートの視認性が向上しました。
  • ウインドウ計算: ウインドウ計算において、N年前、Nか月前、N週前など、過去の期間の「同日」と値を比較する機能をサポートしました。前週比や前年同日比の差分を容易に計算できるようになり、時系列のパフォーマンス分析が簡素化されました。
  • 共通: チャートのX軸、Y軸、色、繰り返しの各シェルフ間で、列の割り当てをドラッグ&ドロップで入れ替えられるようにしました。列を再度選択し直すことなく、可視化のディメンションを素早く再配置できます。
  • 共通: チャートタイプ選択のドロップダウンメニューを再構成し、ツールチップ、アイコン、および直感的な並び順を追加しました。
  • エクスポート: テーブルおよびチャートのエクスポート機能を更新し、画面上で現在適用されている並び順を保持したままデータを出力できるようにしました。
  • デフォルト設定: システム環境設定のチャートデフォルト設定を拡張し、凡例の位置、軸タイトルの表示/非表示、および小数点以下の桁数を含めました。プロジェクト全体でお好みのチャートデザインを自動的に統一できるようになり、手動での反復的なスタイル設定作業を削減できます。
  • デフォルト設定: タイムゾーン表示の切り替えを含む、デフォルトの日付/POSIXct形式を設定するためのシステム設定を追加しました。すべてのチャートでデフォルトでタイムゾーンを非表示にできるようになりました。

アナリティクス

  • 階層クラスタリング: 行(観測値)と列(変数)に対するインタラクティブな階層クラスタリングを追加しました。距離やクラスタリング手法をカスタマイズでき、クラスタ数の分割調整をリアルタイムに行えます。統計アルゴリズムを再実行することなく、多層的なグループ構造を動的に探索できるようになりました。
  • クラスタリング: すべてのクラスタリング手法において、レーダーチャートのツールチップに、標準化されたクラスタ平均、元のスケールの平均、全体の平均、および行数を追加しました。カーソルを合わせるだけで正規化された指標と元の指標の両方の背景情報を簡単に確認できるようになり、クラスタの解釈性が大幅に向上しました。
  • クラスタリング: すべてのクラスタリング手法のサマリテーブルおよびクラスタ数テーブルにおいて、「最小シルエットスコア」列を右端に移動しました。二次的な診断指標へのアクセスを維持しながら、主要な評価指標を優先的に確認できるようになりました。
  • 決定木: 決定木アナリティクスの「詳細を表示」ダイアログに列選択機能を追加しました。確認および開示する元データの列を選択できるようになり、詳細データの確認がより整理され、焦点を絞ったものになります。
  • 決定木(CHAID): CHAID決定木の可視化画面から自由度(DF)の表示を削除し、ツールチップ内でのみ保持するように変更しました。必要に応じて詳細な統計情報にアクセスできる状態を保ちながら、よりシンプルで見やすい決定木を確認できるようになりました。
  • 統計的検定: 統計的検定全体における効果量の小数点精度設定を、小数点以下2桁から3桁に更新しました。小さな効果量の値を正確に確認できるようになり、早い段階で0に丸められてしまうのを防ぎ、レポートの精度が向上しました。
  • 共分散分析(ANCOVA): 平易な言葉による説明文形式のサマリを動的に生成し、セクションを再構成するとともに、調整済み平均と多重比較のためのエラーバーチャートを追加してANCOVAレポートを強化しました。明確な統計的説明と視覚表現により、共変量の調整、効果量、グループ間の差異をより直感的に解釈できるようになりました。
  • 共通: アナリティクスタイプメニューを再構成し、階層クラスタリングをクラスタリングの配下に配置し、決定木とロジスティック回帰を階層的なサブメニューに再編しました。
  • 共通: 各アナリティクスタイプを説明するマウスオーバーツールチップを追加し、クラスタリング分析のメニュー項目を再構成しました。UI内で各分析手法の目的を簡単に理解できるようになり、データに最適な分析手法を選択しやすくなりました。
  • 共通: アナリティクスビュー内のピボットテーブルおよび集計テーブルにおいて、ソートされたデータのエクスポートに対応しました。適用された並び順を保持したまま、アナリティクスのテーブルデータをCSVやクリップボードに直接エクスポートできるようになりました。

ダッシュボード

  • プレビューモード内でダッシュボードを直接編集できるようになりました。編集ビューとプレビュービューを何度も切り替えることなく、調整を行ってその場で更新内容を確認できるようになり、ダッシュボードの構築が効率化されました。
  • ダッシュボード内に画像コンポーネントを追加しました。会社のロゴやグラフィック要素をダッシュボードに直接組み込めるようになり、ブランドのカスタマイズやレポートのプレゼンテーション性が向上しました。
  • ダッシュボードの画像ウィジェットにおいて、画像URL内でのパラメータ使用をサポートしました。パラメータの選択に基づいて、表示される画像を動的に切り替えたりフィルタリングしたりできるようになりました。
  • ダッシュボードの上部に加え、左右の側面にページタブを配置できるようになりました。ページ数が多い場合やページタイトルが長いダッシュボードでも、便利な縦型タブナビゲーションを使用して管理できます。
  • ダッシュボードUI全体に包括的なフォントファミリーのサポートを導入し、デフォルトフォントおよびシステムフォントのオプションを追加しました。既存のダッシュボードとの後方互換性を維持しながら、デスクトップとWebパブリッシュ間でタイポグラフィを一貫してカスタマイズできるようになりました。
  • タイトルテキストの設定UIを、拡張されたフォントピッカーと標準的なカラーセレクターを備えた、すっきりとした2行レイアウトに再設計しました。スムーズなプレビューと一貫したスタイル設定コントロールにより、パネルタイトルをフォーマットできるようになりました。
  • ダッシュボードパネルで、チャート本来のタイトルを使用するか、ダッシュボード固有のタイトルで上書きするかを選択できるオプションを追加しました。
  • ダッシュボードのパネルフレームの余白(マージン)を削除するオプションを追加しました。邪魔な白い境界線の余白なしで、枠いっぱいに広がるカスタムHTMLカードやボタンをデザインできるようになりました。
  • ダッシュボード内のオブジェクト間の余白や境界線を非表示にするオプションを追加しました。シームレスで画面いっぱいに広がるレイアウトを作成できるようになり、ダッシュボードにモダンで洗練された美しさを与えることができます。
  • ダッシュボード内のRスクリプトベースのチャートおよびコードブロックに対する部分レンダリングをサポートしました。ダッシュボード全体を再実行することなく、個別のRチャートのみを更新できるようになり、インタラクティブなダッシュボードの作業効率が大幅に向上しました。
  • ノートおよびダッシュボード内のピボットテーブルと集計テーブルにおいて、ユーザーが並び替えた順序でのデータエクスポートに対応しました。カスタマイズした表示順と一致するCSVまたはクリップボードデータをダウンロードできるようになり、エクスポート後に並び替える手間を省くことができます。
  • ナンバーチャートのタイルを行の高さに対してレスポンシブにし、フォントサイズと間隔を自動調整するようにしました。不要な空白を生じさせることなく、通常のダッシュボード行内に指標タイルをすっきりと収めることができます。
  • モバイル画面での閲覧に合わせて、ダッシュボードのレイアウトとパラメータコントロールを最適化しました。スマートフォンの画面でもレイアウトが崩れることなくマルチカラムのダッシュボードを表示でき、ダッシュボードのパラメータをスムーズに操作できるようになりました。
  • ダッシュボードのページタブタイトルの表示幅と文字数をカスタマイズできるオプションを追加しました。マウスカーソルを合わせることなく完全なタブ名を確認できるようになり、ダッシュボードのナビゲーションがより明確で直感的になりました。
  • チャートタイトルの色とフォントをカスタマイズできる設定を追加しました。ダッシュボードのテーマや企業のブランディングに合わせて、チャートタイトルのスタイルを設定できるようになりました。
  • ダッシュボードのページタブを複数行で表示できるようになりました。ダッシュボードのページ数が多い場合でも、すべてのタブを複数行にわたって表示できるため、タブのはみ出しを防ぎ、ナビゲーションの効率が向上しました。
  • ダッシュボードをパブリッシュする際に、特定のページやタブを非表示にできるオプションを追加しました。下書きや検証用のタブは非公開にしたまま、完成したダッシュボードページのみを関係者に公開できるようになりました。

ノート

  • ノートエディタに「履歴」ボタンを追加しました。この履歴ダイアログには、ノートに関連する変更のみが表示されます。ノートの以前のバージョンを簡単に復元できるようになりました。

検索

  • ノート本文、加工ステップ、スクリプトにわたるインデックス作成の拡張、関連度ランキングへの対応により、デスクトップ検索を全面的に刷新しました。プロジェクト内のオブジェクトをはるかに迅速かつ正確に見つけることができるようになりました。
  • プロジェクト一覧ページに専用の検索ダイアログを追加しました。構造化されたフィルタや、オブジェクトタイプ別、キーワード別の絞り込みを使用して、特定のプロジェクトを素早く見つけることができるようになりました。
  • プロジェクト内に専用のプロジェクト検索ダイアログを追加しました。コンポーネントレベルの結果一覧、対象チェックボックス、およびキーワードのスニペットハイライト機能を備えています。どのアイテムが一致したかを正確に特定し、特定のチャート、ステップ、またはノートに直接ジャンプできるようになりました。
  • アプリケーションがオフラインモードで動作していることを明確に示す視覚的なUI表示を追加しました。接続ステータスを即座に確認できるようになり、クラウドやサーバーとの同期操作を試みる際の混乱を防ぐことができます。

全般

  • アプリケーションを再起動しても、プロジェクト、ノートエディタ、およびダッシュボードウィンドウのウィンドウサイズが保持されるようにしました。

インストール

  • CRANリポジトリサーバーに接続できない場合に、パッケージが利用不可と誤って報告するのではなく、実際の失敗原因を表示するようにRパッケージのインストールエラー処理を更新しました。

不具合修正

AIデータ

  • 非表示のMarkdownエディタウィンドウがプロジェクトウィンドウに属するWindowIPCセッションと競合したため、AIデータのリクエストがタイムアウトする問題を修正しました。
  • AIデータ内でRスクリプトの説明を生成する際、説明が表示されずにエラーで失敗する問題を修正しました。
  • 英語のユーザーインターフェースでAIデータを使用すると、利用可能なFREDデータ接続の検出およびリンクに失敗する問題を修正しました。

AI関数

  • 不足している項目が実際にはRセッション内の復元されていないステップやデータフレームであるにもかかわらず、AI関数のステップで「列が見つかりません」というエラーが発生する問題を修正しました。
  • ステップダイアグラムダイアログでAIサマリを生成すると、ダイアグラムのノードレイアウトが崩れる問題を修正しました。

サマリビュー

  • データを再インポートして特定の加工ステップに移動すると、サマリビューでエラーが発生するか空白のページが表示される問題を修正しました。

テーブルビュー

  • テーブルビューのサマリで情報アイコンボタンをクリックしても反応しない問題を修正しました。

データ加工

  • pair_countの数式解析中に、アンケートの列名が極端に長いとRで重複した変数名として報告される問題を修正しました。
  • pivot_longerの実行中、選択式の中で列名を変更しようとするとリネームコンテキストエラーが発生する問題を修正しました。
  • 集計処理中に、数値列ではなく文字列列が渡されたために集計関数が無効な型のエラーで失敗する問題を修正しました。
  • 「列を結合(Bind Columns)」ステップで、実行後に新しく追加された列がテーブルビューでオレンジ色にハイライトされない問題を修正しました。
  • 「複数回答の列をまとめる」ステップで、ステップ実行後に新しく作成された統合列がオレンジ色にハイライトされない問題を修正しました。
  • 複雑な列選択操作中にキャッシュの非同期が発生し、R環境内で内部データフレームのステップオブジェクトが見つからなくなる問題を修正しました。
  • 条件に対応する値が不足しているか末尾にカンマが含まれている場合に、case_whenで引数不足のエラーが発生する問題を修正しました。
  • フィルタダイアログの論理演算子ドロップダウンが、他の加工ステップをクリックしたときに自動的に閉じない問題を修正しました。
  • round関数を使用する際、1桁の偶数の後に.5が続く値が、標準的な算術四捨五入ではなく偶数丸め処理によって切り捨てられていた問題を修正しました。

チャート

  • 複数レベルの列ヘッダーを持つピボットテーブルをノートに追加すると、エディタでチャートが空白で表示され、プレビューでグループヘッダーが崩れてレンダリングされる問題を修正しました。
  • タイトルにシングルクォート(‘)が含まれるナンバーチャートを追加しようとするとエラーが発生する問題を修正しました。
  • ナンバーチャートのメイン/サブ指標設定ダイアログで、「OK」をクリックした際に変更を適用してプレビューを繰り返し確認できず、ダイアログがすぐに閉じてしまう問題を修正しました。
  • ナンバーチャートにおいて、サムネイルプレビュー画像内のキャプションテキストが適切に折り返されない問題を修正しました。
  • チャートフィルタにおいて、複製ボタンが無効化ボタンおよび削除ボタングループの外側に誤って配置されていた問題を修正しました。
  • ピボットテーブルおよび集計テーブルにおいて、計算方法を割合から行数に戻した後もパーセンテージ表記が残ってしまう問題を修正しました。
  • 共有サーバー上で、パブリッシュされたダッシュボード内のワードクラウドチャートの画像ダウンロードボタンが表示されない問題を修正しました。
  • htmlwidgetsやnetworkD3などの必要なパッケージが見つからないか、プロセスの競合により読み込みが妨げられたため、カスタムRチャートの実行に失敗する問題を修正しました。
  • ヒートマップチャートにおいて、軸オプションの「長いラベルを折り返す」が無視される問題を修正しました。
  • NAのみ、または0とNAのみを含む数値列をグループ化(ビン分割)する際、すべてのNA値が(NA)カテゴリに割り当てられず、0.00 - 0.00のバケットに配置されてしまう問題を修正しました。
  • タブを移動または切り替えた際に、チャートおよびアナリティクスの可視化が表示されない問題を修正しました。
  • 設定ダイアログで「自動実行」オプションのチェックが外れている場合、「適用」ボタンをクリックしてもチャートが更新されない問題を修正しました。
  • 現在の可視化データキャッシュが見つからない場合に、デスクトップのAIチャートサマリがエラーで失敗する問題を修正しました。
  • ピボットテーブルで列をドラッグ&ドロップする際の動作が遅く、列選択エリアがフリーズする問題を修正しました。
  • チャートの色の表示名で「NAを表示名で置換」オプションを有効にすると、因子(factor)型の列に対するRのrecodeエラーでクエリが失敗する問題を修正しました。
  • 離散的な数値列が「色」に割り当てられているバーチャートにおいて、凡例カテゴリの表示名を編集できない問題を修正しました。
  • 横棒チャートにおいて、X軸と色の両方に同じ列が割り当てられている場合、バーと対応するX軸ラベルの位置がずれてしまう問題を修正しました。
  • ピボットテーブルにおいて、末尾が.5で終わる小数値が次の増分に適切に切り上げられず、切り捨てられていた問題を修正しました。
  • 「複数変数」オプションを使用して複数の論理値列を選択すると、誤って文字列データ型が割り当てられ、「TRUEの割合(%)」などの論理値固有の集計が表示されない問題を修正しました。
  • 数値日付関数またはグループ化された数値列で「繰り返し」を使用すると、NA値を持つ行が(NA)ファセットパネルとして表示されずに完全に除外されてしまう問題を修正しました。

アナリティクス

  • CHAID決定木において、中間の分割グルーフラベルが不等号表記ではなく「2 - 3」と表示される問題を修正しました。
  • ランダムフォレストアナリティクスにおいて、目的変数列に空文字が含まれている場合、実行時に「subscript out of bounds」エラーが発生する問題を修正しました。
  • アナリティクスビューにおいて、画面の高さが低い場合にアナリティクスタイプのドロップダウンメニューがウィンドウ下部で見切れてしまう問題を修正しました。
  • 回帰および決定木ベースのアナリティクスでAIサマリを生成する際、空の予測変数リストが送信される問題を修正しました。
  • 括弧を含む列名が誤って関数呼び出しとして解析され、不適切にエスケープされた結果、生成されたRコマンドで構文エラーが発生する問題を修正しました。
  • 多値分類のランダムフォレストモデルにおいて、目的変数のクラスがテスト分割データにのみ存在する場合に、予測ラベルおよび混同行列のエントリの割り当てが誤ってしまう問題を修正しました。
  • ANCOVAにおける偏イータ二乗値が、早すぎる段階で丸められた値を使用して効果量の閾値に対して評価され、誤った定性的解釈につながっていた問題を修正しました。
  • 2標本の比率検定を実行すると、処理されないテンプレート変数レンダリング例外が発生し、エラーメッセージなしで結果ペインが完全に空白になる問題を修正しました。
  • K-Medoidsクラスタマップの第2主成分軸が独自の寄与率ではなく累積分散を表示し、両軸の合計が100%を超えてしまう問題を修正しました。

ダッシュボード

  • ダッシュボードにおいて、アナリティクスチャート上で_showLoadingがTypeErrorをスローし、その後のチャートのローディングインジケーターが表示されなくなり、フィルタの更新がブロックされることがある問題を修正しました。
  • ダッシュボードにおいて、密集したラベルテキストによってチャートが指定された描画コンテナの外側に押し出され、円グラフの円がレンダリングされない問題を修正しました。
  • ダッシュボードから決定木のチャート画像をエクスポートすると、空白の画像が出力される問題を修正しました。
  • ダッシュボードの編集モードで特定のページを複製すると、インプレースで変更を適用できないというエラーで失敗し、ダッシュボードを実行しても解決しない問題を修正しました。
  • 多数のチャートと動的パラメータを含む大規模なダッシュボードを開くと、「別のRプロセスが実行中です」という誤ったエラーが頻繁に発生する問題を修正しました。
  • ダッシュボードのテキストパネル内のRブロックにおいて、キャッシュが有効になっている場合でもキャッシュを使用せず、実行ごとに再実行されて結果が更新され、ノートのRブロックと動作が不一致になっていた問題を修正しました。

ノート

  • ノートの保存またはエクスポート時に、出力ディレクトリが既に存在しているか別のプロセスによってロックされていると、ファイル操作がEEXISTエラーで失敗する問題を修正しました。
  • 外部Webサイトに埋め込まれたノートにおいて、見出しのアンカーリンクをクリックしても該当セクションに移動しない問題を修正しました。
  • ノートのプレビューで、Mermaidダイアグラムのスタイルとテーマ設定が適切に適用されない問題を修正しました。

パブリッシュ

  • 共有/パブリッシュダイアログの「チームメンバーに通知」チェックボックスの配置がずれており、誤った位置に表示されていた問題を修正しました。

オフラインモード

  • Windows版のExploratory Desktopにおいて、組み込みのCAバンドルが拡張されず置換されたため、OSのルートストアにISRG Root X1証明書がない場合に接続に失敗してオフラインモードにフォールバックする問題を修正しました。

v16.3

リリース日

2026年9月16日

機能強化

AIデータ

  • 生成されたRスクリプトの明確な解説を提供する「コードを説明」ボタンを追加しました。ユーザーは自身の操作によって生成されたRコードを容易に理解できるようになります。

データソース

  • ダッシュボードのパブリッシュ時に無効な接続参照を自動的に検知・修正するよう、OAuth接続の処理を強化しました。

共通機能

  • 列選択ダイアログにおいて、ドラッグ&ドロップで列選択エリアのサイズを変更できる機能を追加しました。

データ加工

  • ステップダイアグラムにおいて、親データフレームとブランチデータフレームの間に異なる色を設定しました。

チャート

  • 複数回答の列を使用するピボットテーブル向けに「行数設定」ダイアログを追加し、元の行数の表示ができるようになりました。展開後の件数ではなく展開前の元の行数を表示することを選択できるようになり、アンケート分析で正確な回答者数をレポートすることが容易になりました。
  • ピボットテーブル、集計テーブル、テーブルの拡大表示内において、ドラッグによる列幅の変更を可能にしました。

アナリティクス

  • 相関:ヒートマップチャートにおける変数のグループ化ロジックを改善しました。相関係数の近接度に基づいて変数がグループ化され、並べ替えられます。
  • 潜在クラス分析(LCA):潜在クラス分析(LCA)において、数値型の変数を選択できるようになりました。自動的にファクター型(順序カテゴリカルデータ)に変換されます。
  • 決定木:決定木のツールチップから条件テキストを直接コピーできるようになりました。
  • K-Medoids:K-Medoidsのクラスタープロファイルのレーダーチャートにおいて、「すべての変数を表示」のデフォルト設定をTRUEに更新し、クラスタリングに使われたすべての変数がデフォルトで表示されるようにしました。
  • アナリティクスレポート本文内のP値(統計的有意性を測る指標)およびパーセンテージの書式を標準化し、0.001未満の値を「< 0.001」および「< 0.1%」と表示するようにしました。

ノート

  • ノートをPDFにエクスポートする際、H1見出しの前の自動改ページを無効にするオプションを追加しました。これにより、不要な空白やタイトルのみのページが発生するのを防ぐことができます。

不具合の修正

サマリビュー

  • サマリビューにおいて、0と1のみを含む数値列に対して「詳細を表示 / 非表示」メニューが機能せず、アサーションエラーが発生する問題を修正しました。

データ加工

  • 行フィルタダイアログにおいて、複製アイコンが誤った位置に配置されていた問題を修正しました。
  • 「値の順序を設定」ダイアログ経由で新しいステップを追加した際、新しく作成された列が選択した列のすぐ右側ではなく、最後の列として配置されていた問題を修正しました。
  • ステップダイアグラムにおいて、新しく作成されたブランチが即座に表示されない、コントローラーがダイアログのフッターと重なる、ノードを接続する線が短すぎて矢印が適切に表示されないといった問題を修正しました。
  • ステップダイアグラムにおいて、無効化されたステップの表示・非表示を切り替えると、ステップノードの位置がずれ、意図した位置から大きく離れて表示される問題を修正しました。

チャート

  • ピボットテーブルにおいて、欠損値(NA)を含むセルで「詳細を表示」をクリックした際、生成されたフィルター条件がNA対応の演算子を使用せずリテラル文字列と比較していたため、表示される行が0行になっていた問題を修正しました。
  • Exploratoryのアップグレードに伴いデフォルトのカラーパレットが更新されたことで、既存のピボットテーブルのカラーパレットが意図せず青から緑に変更されてしまう問題を修正しました。以前のバージョン(v15.x以前)で作成されたピボットテーブルには、新しいデフォルトカラーパレットが適用されないように更新しました。

アナリティクス

  • 順序ロジスティック回帰において、チャートの向きを切り替えた際にチャートの色が予期せず変更されてしまう問題、およびデフォルトでチャートが垂直方向になっていなかった問題を修正しました。
  • UI上でz値統計量のラベルが適切に翻訳されていなかった問題を修正しました。

パラメータ

  • 「equal_or_all」のフィルター演算子がパラメーターで使用された際、空またはNULL値を選択すると、すべての値として扱うか適切に処理する代わりに、サイズ0のベクトルエラーでアプリケーションがクラッシュする問題を修正しました。

v16.2

リリース日

2026年9月12日

機能強化

データラングリング(データ加工)

  • フィルタのステップにおいて、「いずれかの列」および「すべての列」を対象とした操作をサポートしました。これにより、選択した列のいずれかに欠損値(NA)が含まれる行を削除するといった複雑なフィルタリングを、1つの操作で簡単に行えるようになりました。
  • 「ウェイト列の作成」機能を追加しました。人口構成などに基づいたウェイト(重み)を生成できる機能を導入しました。これにより、サンプルの分析結果を対象となる母集団の構成に合わせる「ウェイトバック集計」が容易になります。
  • ダミー変数の結合:0と1で構成される複数のダミー変数の列を、カンマ区切りの1つの列に統合するための新しいUIを導入しました。アンケートデータなどを、より読みやすい形式に簡単に変換できます。
  • ステップダイアグラムの改善:ステップ図内の各ノードの表示を読みやすく再設計しました。

チャート

  • 散布図:ジッター(重なりを避けるために点をわずかに散らす機能)を追加しました。統計的な解析結果には影響を与えず、可視化のためだけに機能する仕組みを採用したことで、アンケートデータなどX軸とY軸の値が限られているときでも、データの集まりを可視化しやすくなりました。
  • 散布図:LOESS(局所回帰)トレンドラインにおいて、LOESS曲線がより多くのデータを処理できるようになり、さらにパフォーマンスも改善しました。また、UIから直接トレンドラインの滑らかさや頑健性を微調整できるようになり、非線形な関係性をより精密にモデル化できます。
  • ナンバー:ナンバーチャートで「繰り返し(グループ化)」をサポートしました。「繰り返し」に割り当てたグループに基づいて複数のナンバータイルを自動生成できるため、セグメント間での主要指標の比較が容易になります。
  • ナンバー:ナンバーチャートの「フォーマット」ダイアログの色の設定に「バー」を追加し、比率を表すインジケーターバーを表示できるようになりました。割合を視覚的に表現できるため、一目で値を比較しやすくなります。
  • ナンバー:メインの指標が比率(Ratio)の場合に、サブ指標として行数(サンプルサイズ)を表示するオプションを追加しました。
  • ナンバー:異なる列に対して複数のナンバーチャートを一度に作成できるようになりました。複数の指標を選択して一連のナンバータイルを同時に生成できるため、ダッシュボード作成の時間を大幅に短縮できます。
  • ナンバー:サムネイルのキャプチャ機能を更新し、サブ指標もサムネイルに表示されるようになりました。
  • ピボットテーブル:行、列、値、繰り返しの各メニュー間で、ドラッグ&ドロップによる列の入れ替えをサポートしました。チャートのレイアウト変更をより迅速かつ直感的に試すことができます。
  • ピボットテーブル:ウェイト(重み)に基づいた集計をサポートしました。母集団のウェイトを考慮した集計が可能になり、アンケートデータなどにおいて、より正確で代表性のある分析が行えます。
  • ピボットテーブル:「値を制限」設定内で、欠損値(NA)を直接削除できるオプションを追加しました。複雑なテーブルで「変数の値」を使用する際などに、不要なデータを簡単に除外できます。
  • ピボットテーブル:「値を制限」の「複数の値(値を分ける)」オプションを使用した後、特定の値を削除できる機能を追加しました。複数回答アンケートのデータから、不要なカテゴリをより簡単に除外できます。
  • レーダーチャート:軸ラベルのテキスト折り返しをサポートしました。長いカテゴリ名が重なったり切れたりすることなく表示されるようになり、チャートの視認性が向上します。
  • 繰り返し:繰り返し機能によって生成された個々のチャートを、個別の画像としてエクスポートできるようになりました。
  • チャート全般:「長いラベルを折り返す」が有効な際、軸ラベルのスマート自動フィット機能を実装しました。ラベルの長さに応じてフォントサイズや角度が自動調整されます。
  • ヒートマップ:セル内にカウント(N)と比率の両方を同時に表示できるようになりました。
  • AIサマリ:AIサマリのダイアログが開いている間も、後ろにある表などをスクロールできるようになりました。サマリーを読みながら、元のチャートを参照することが可能です。
  • チャートメニューに「貼り付け」オプションを追加しました。従来のドラッグ&ドロップに加え、使い慣れたメニュー操作でチャートをコピー、貼り付けできるようになりました。

アナリティクス

  • 潜在クラス分析 (LCA):潜在クラス分析をサポートしました。カテゴリデータを用いたクラスタリングが可能になり、アンケート回答などの非数値データから隠れたセグメントを特定できます。
  • ANCOVA(共分散分析):ANCOVAのアナリティクスレポートを再設計しました。
  • ANCOVA(共分散分析):Rの処理レイヤーを刷新し、複数の共変量への対応と、より堅牢なモデル選択ロジックを実装しました。より複雑で統計的に妥当な共分散分析を、高い精度と信頼性で実行できます。
  • ANCOVA(共分散分析):パラメトリック・ブートストラップ法を用いた95% Q-Qエンベロープ(誤差の範囲)の表示をサポートしました。残差が正規分布から大きく外れていないかを視覚的に評価でき、モデルの妥当性確認がより確実になります。
  • CHAID(決定木):ANOVA F検定を用いることで、数値型の目的変数に対するCHAID決定木をサポートしました。収益やスコアなどの連続値に対する主要な要因を特定でき、より柔軟なセグメント分析が可能になります。
  • K-Means クラスタリング:クラスターの作成において、どの変数がより重要または影響力があるかを示すチャートを追加しました。クラスターを特徴づけている変数を容易に把握できます。
  • K-Medoids クラスタリング:K-Medoidsクラスタリングにおけるレーダーチャートを改善し、データのグループ化と可視化を最適化しました。異なるクラスターの特徴をより簡単に特定・比較できるようになります。
  • 決定木:決定木の可視化において、演算子を「未満」は左側に、「以上」は右側に表示するように更新し、数値の分割間隔のソート順を修正しました。分割条件をより直感的に、論理的な昇順で読み取ることができます。
  • クロンバックのアルファ(信頼性係数):Factor(順序付きカテゴリ)型の変数において、すべての値を保持するように更新しました。これにより、カテゴリデータを用いた信頼性分析においてデータの整合性が維持されます。
  • 仮説検定:統計検定のメニューを再設計し、論理的なカテゴリへのグループ化と説明的なツールチップを追加しました。分析に適切な検定手法をより簡単に見つけ、理解できるようになります。
  • カイ二乗検定:カイ二乗検定のレポートにおいて、件数(N)と比率を、行ではなく列として表示するように更新しました。

不具合の修正

AIデータ

  • AIデータダイアログ内のRスクリプトエディタにおいて、read_csv() などの一般的なR関数が正しくハイライトされない問題を修正しました。
  • Snowflakeのパッケージ命名規則およびドライバ内部の変更により、Snowflake ODBCドライバの自動セットアップが失敗する問題を修正しました。

データソース

  • Google BigQueryにおいて、セッションパラメータを使用したクエリが、プレビューでは正しく表示されるものの、インポート後にデータが返されない問題を修正しました。

データラングリング(データ加工)

  • 日付フィルタの「月 - 名前 (1-12)」が、Windowsでは動作するもののmacOSで機能しない問題を修正しました。
  • キャッシュが古い状態(黄色)のステップを再実行した際、「キャッシュ日時」のタイムスタンプが更新されない問題を修正しました。
  • 「値を置換」ダイアログにおいて、対象の列がFactor(順序付きカテゴリ)型であっても、他のFactor列を選択肢として表示できない問題を修正しました。
  • 日本語環境において、フィルタダイアログの検索ドロップダウンが、IMEの漢字変換を確定した際に意図せず閉じてしまう問題を修正しました。
  • ステップダイアグラムにおいて、特定のノードのヘッダー部分にマウスを置いた際、ツールチップが表示されない問題を修正しました。

チャート

  • 「繰り返し」レイアウトにおいて、1行あたりのチャート数を1または2に設定し、かつグループ数が多い場合に、チャートが大きく重なってしまう問題を修正しました。
  • 散布図において、データポイントをクリックして「詳細を表示」ダイアログを開いた後、色の不透明度設定が無視される問題を修正しました。
  • サムネイルキャプチャ処理の影響により、チャートタブの切り替え動作が遅くなっていた問題を修正しました。
  • ピボットテーブルにおいて、ウィンドウ計算と「値を制限」を組み合わせて使用した際、列の合計値が正しく更新されない問題を修正しました。
  • ピボットテーブルにおいて、複数の変数を選択した際、「変数の値」の表示順序がFactor(順序付きカテゴリ)のレベル順を無視してしまう問題を修正しました。
  • ナンバーチャートのサムネイル画像がインターフェース上で大きく表示されすぎる問題、およびピボットテーブルとテーブルのサムネイルに枠線が表示されない問題を修正しました。

アナリティクス

  • アナリティクスビューを開く際、または既存のアナリティクス項目を削除する際に、大幅なパフォーマンスの遅延が発生する問題を修正しました。
  • アナリティクス・タイプのドロップダウンにおいて、「検出力分析」と「A/Bテスト」のサブメニューが画面下部で切れてしまう問題を修正しました。
  • 決定木:CART決定木において、最初の分割以降、“TRUE”(真)のノードが常に左側に配置されない問題を修正しました。
  • 決定木:CHAIDのツリー図において、年齢グループなどのカテゴリ順序が正しくない問題、およびツールチップに値が表示されない問題を修正しました。
  • CHAID決定木レポートにおいて、列名に含まれるカンマがピリオドに誤変換され、テーブル内で正しく表示されない問題を修正しました。
  • K-Means クラスタリング:重複行が多いデータセットにおいて、候補となるクラスター数がユニークな観測値数を超えてしまい、エルボー法がクラッシュする問題を修正しました。
  • K-Means クラスタリングにおいて、特定のデータセットでレーダーチャートが正しく描画されない問題を修正しました。
  • K-Means クラスタリングにおいて、「最大反復回数」の設定が無視され、ユーザーの入力に関わらず常にデフォルトの回数で実行される問題を修正しました。
  • K-Medoids クラスタリングのレーダーチャートにおいて、変数が類似度順にソートされておらず、K-Meansと比較して解釈が困難であった問題を修正しました。
  • 相関分析:分析条件と出力データの不一致により、サマリーに誤った情報が表示される問題を修正しました。
  • 主成分分析(PCA): 「正規化」オプションがオフの際、固有値テーブルのカイザー基準の列が空白になる問題を修正しました。
  • 主成分分析(PCA):ピアソン相関を用いてカテゴリ変数を分析した際、符号付き負荷量(Signed Loadings)チャートがエラーになる問題を修正しました。
  • 因子分析:回転手法に「Geomin (斜交)」を選択すると、内部パラメータ名の誤りにより分析がクラッシュする問題を修正しました。
  • 対応分析:1次元のみのモデルにおいて、座標テーブルのラベルが標準の「次元 1」ではなく、内部的なRの変数名で表示される問題を修正しました。
  • ロジスティック回帰および順序ロジスティック回帰:変数が1つしかない場合に多重共線性の情報を表示しようとしてエラーになる問題を修正しました。
  • 2群間の統計検定:グループ化されていない分析において、フィルタリングによって一方のグループのデータがすべて削除された場合に、不明瞭なエラーでクラッシュする問題を修正しました。
  • 仮説検定:実行時に列の型チェックが行われず、上流のステップでデータ型が変更された場合に、非数値データで無効な結果が生成される問題を修正しました。
  • t検定、ANOVA、カイ二乗検定の確率分布チャートにおいて、統計値が正しくなく、ランダムな垂直線が表示される問題を修正しました。
  • 集計済みデータを用いたt検定において、設定された「帰無仮説の平均の差」が計算時に無視され、差をゼロとした統計量とp値が算出される問題を修正しました。
  • 集計済みデータを用いた2標本t検定において、両方のグループの分散がゼロの場合に、内部エラーや無効な統計量が発生する問題を修正しました。
  • ANCOVA(共分散分析):Rのプリプロセッサにおける列名の不一致により、共変量が選択されていない場合に「平均値(調整済み)」チャートが空になる問題を修正しました。
  • ANCOVA(共分散分析):共変量に欠損値(NA)が含まれる場合、調整前と調整後の統計量で行数が一致しない問題を修正しました。
  • ANCOVA(共分散分析)の「残差 vs 予測値」チャートにおいて、残差の線が正しく表示されない問題を修正しました。
  • ANOVA(分散分析):共変量が定数であるか多重共線性があり、かつ交互作用がオフの場合に、分かりやすいメッセージではなく生のRエラーが返される問題を修正しました。
  • ANOVA(分散分析):カテゴリ列が論理型、日付型、またはPOSIXct型の場合に、不明瞭なエラーでモデル作成が失敗する問題を修正しました。
  • One-Way ANOVA(一元配置分散分析):他のグループに十分なデータがあっても、少なくとも1つのグループのデータが1件しかない場合に、生のRエラーで失敗する問題を修正しました。
  • クラスカル・ウォリス検定:カテゴリ列がFactor(カテゴリ)型でない(数値や日付など)場合に、事後検定(Post-hoc test)で失敗する問題を修正しました。
  • 正規性検定:選択した列のうち1つでもエラー(データ数が少なすぎるなど)が発生すると、すべての列の検定が中断される問題を修正しました。
  • 正規性検定:選択した列が単一の値しか持たない(縮退している)場合に、結果が表示されない、またはクラッシュする問題を修正しました。
  • 正規性検定:欠損値(NA)を除外する前にサンプリングが行われていたため、乱数のシード値によって結果が不安定になったり失敗したりする問題を修正しました。
  • 正規性検定のUIにおいて、最小要件であるサンプルサイズ3未満の設定が可能になっており、実行時エラーが発生する問題を修正しました。
  • 1標本の比率検定において、基準となる確率が0または1の場合、内部のR関数が数値ではなく論理値のp値を返すためエラーになる問題を修正しました。
  • 1標本t検定において、無限大(Inf)の値を除外せずに要約統計量に含めてしまい、無効な結果が算出される問題を修正しました。

パラメータ

  • ダッシュボードのパラメータ値リストが、パブリッシュ時やサーバーでの初回アクセス時に古い状態に戻ってしまう問題を修正しました。

プロジェクト

  • 特定のプロジェクトを閉じる際、処理の非効率性により過度な時間(例:25秒など)がかかる問題を修正しました。

v16.1

リリース日

2026年8月26日

機能強化

データソース

  • 他のユーザーから共有されたインポート済みコンテンツの接続先を選択する際、接続ダイアログにホスト名とデータベース名が表示されるようになりました。これにより、既存の接続から正しいデータソースを正確に特定・選択できるようになり、共有された作業をインポートする際のミスを防ぐことができます。

データラングリング(データ加工)

  • ステップダイアグラム内で、非表示(無効化)に設定されたステップを隠すオプションを追加しました。これにより、アクティブなデータパイプラインをよりすっきりと表示させることができ、第三者が実際のデータ処理ロジックを理解しやすくなります。

チャート

  • 「繰り返し」セクションで「複数の変数」を使用する際、表示名を編集できるオプションを追加しました。これにより、チャート上のラベルを直接カスタマイズできるようになります。
  • ピボットテーブル:列を一時的に削除しても、割合(比率)の計算方向の設定が保持されるように更新しました。これにより、設定を失うことなく異なる表示モードを切り替えることができ、繰り返しの手動調整を大幅に削減できます。
  • ピボットテーブル:ターゲット合計の設定から、不要な「総合計」オプションを削除しました。混乱を招きやすく、あまり有用ではなかったオプションを取り除くことで、UIを簡素化しました。
  • ピボットテーブル:フォーマットで「割合(パーセンテージ)」を選択した際、デフォルトで常に小数点以下1桁まで表示するように更新しました(例:「6.12%」ではなく「6.1%」)。これにより、レポート内でのデータ表示に一貫性が保たれ、値を正確に比較しやすくなります。

アナリティクス

  • K-Medoidsクラスタリング:行数の多いデータに対するK-Medoidsクラスタリングアルゴリズムの実行パフォーマンスを改善しました。数千行以上のデータでもより高速に処理できるようになり、大規模なアンケート回答データなどの探索的分析をより効率的に行えます。

ノート

  • ノートエディタでチャートを挿入する際、タイトルと一緒にチャートのコメントも自動的に含まれるように更新しました。これにより、チャート追加のさいに重要な付属情報が保持され、説明文をノートに手動でコピーする手間を省くことができます。

不具合の修正

データソース

  • 「スキーマ情報の取得」ボタンにおいて、「更新」ボタンを先にクリックしない限り、更新された接続詳細が反映されない問題を修正しました。

データラングリング(データ加工)

  • AIサマリーおよびノートのエクスポートワークフローを通じて生成されたPDFドキュメントにおいて、ステップダイアグラムが欠落していた問題を修正しました。
  • 別のデータフレームに属するステップをクリックするたびに、ステップダイアグラムのズームレベルが予期せずリセットされる問題を修正しました。
  • ステップにコメントを追加した際、ステップダイアグラム上で実際の操作サマリーが隠れ、コメントテキストに完全に置き換わってしまう問題を修正しました。

チャート

  • チャートのX軸ラベルにおいて、長いラベルを持つバーが多い場合に、ラベルが重なったり、折り返しや角度の調整が正しく行われない問題を修正しました。
  • アナリティクスやチャートがたくさん含まれるデータフレームをコピーしようとすると、「RangeError: Invalid string length」というエラーで失敗する問題を修正しました。
  • ピボットテーブル:単語が特殊文字で連結されている場合に、テーブルの行ヘッダーテキストでテキストの折り返し機能が動作しない問題を修正しました。
  • ピボットテーブル用に生成されたサムネイル画像が、歪んだり正しく表示されない問題を修正しました。

アナリティクス

  • 順序ロジスティック回帰:数値型の目的変数が、1〜5の尺度のような小さな範囲の値であっても、割り当て時に誤ってビン分割(グループ化)されてしまう問題を修正しました。

ノート

  • ノート内のテキストの一部を選択した状態でAIノートエディタを起動しようとすると、エディタが開かない問題を修正しました。

インストール

  • Intel Macにおいて、prophetパッケージが正しくインストールできなかったため、v16へのアップグレード中にRパッケージのインストールが失敗する問題を修正しました。

v16.0

リリース日

2026年8月19日

新機能

AIデータ

自然言語で必要な内容を説明するだけで、Exploratoryにデータを取り込めるようになりました。 SQLの書き方、APIの呼び出し、PDFの解析、複数のExcelファイルの結合、ウェブサイトのスクレイピングなどの方法を調べる代わりに、欲しいデータをAIに伝えるだけです。AIが最適な取得方法を判断し、必要なRスクリプトを生成・実行して、結果をExploratoryにインポートします。 ExploratoryはR言語で動作しているため、AIデータはExcel、CSV、JSON、XML、PDF、データベース、クラウドサービス、API、ウェブサイト、オープンデータなど、Rからアクセス可能な幅広いデータソースに対応しています。 例えば、AIデータに以下のような依頼が可能です:
  • このExcelファイルをインポートして、複数のシートを1つのデータセットに結合して。
  • このPDFから売上テーブルを抽出して。
  • Googleアナリティクスから過去30日間のウェブサイトトラフィックデータを取得して。
  • e-Statから東京都の人口データを取得して。
  • データベースから過去12ヶ月間の顧客別売上合計を取得して。
AIデータは、分析準備における退屈で技術的なステップの多くを対話的なワークフローに変えると同時に、Rベースのデータパイプラインとしての透明性と再現性を維持します。

データラングリング(データ加工)

  • ファクター(カテゴリーデータ)のレベルを設定するための新しいUIを作成しました。これにより、現在のデータに存在しない値に対してもレベルを定義できるようになります。回答が欠落している場合でも、リッカート尺度(5段階評価など)の全5点を表示するなど、一貫した可視化や要約統計が可能になります。
  • 複数回答のアンケートデータをロング形式(縦持ち)に変換するための新しいUIを作成し、複数の列を選択できるオプションを追加しました。これにより、複雑なアンケート回答のクロス集計や分析を、手動の加工ステップを繰り返すことなく簡単に行えるようになります。

チャート

  • ピボットテーブル:ピボットテーブルおよび集計テーブルで「複数変数」の選択をサポートしました。これにより、ワイド形式(横持ち)の列を直接クロス集計できるようになります。
  • ピボットテーブル:ピボットテーブルとチャートで「複数の値」列をサポートしました。カンマ区切り(またはその他の区切り文字)で入力された値を直接分析できます。行を分割するための複雑なデータ加工が不要になり、多肢選択式質問を含むアンケートデータの分析が大幅にスピードアップします。
  • ピボットテーブル:ピボットテーブルで「繰り返し」設定をサポートしました。
  • ピボットテーブル:「繰り返し」グループごとに、ピボットテーブルを1つのExcelまたはGoogleスプレッドシート内の別々のシートとしてエクスポートする機能を追加しました。グループ化されたデータを自動的にタブに整理できるため、大規模なエクスポートレポートの閲覧が容易になります。
  • ピボットテーブル:ピボットテーブルの行に「並列」オプションを導入しました。複数のグループ列を階層構造ではなく、同じレベルに並べて表示できます。これにより、手動のデータ変換なしでアンケート分析用の一般的な表(GT表)を簡単に作成できます。
  • レーダーチャート:レーダーチャートで「カテゴリー」入力モードをサポートしました。キー列と値列を選択するだけでレーダーチャートを作成できるため、データがすでに整然とした形式(Tidy Data)であれば、すべての変数を手動で割り当てる必要がなくなります。
  • チャート:「複数の値」列の機能を、通常のチャート(バー、ラインなど)でもサポートしました。区切り文字で区切られたテキストデータを、別途データ加工することなく標準的なチャートで直接可視化できます。
  • チャート:「複数変数」の選択を通常のチャートでもサポートしました。バー、ライン、レーダー、パイ、散布図など、さまざまなチャートタイプのX軸や「繰り返し」軸で「複数変数」を選択できるようになりました。

アナリティクス

  • K-Modesクラスタリング:カテゴリ型データに特化したK-modesクラスタリングのサポートを追加しました。
  • K-Medoidsクラスタリング:順序カテゴリ型データに特化したK-Medoidsクラスタリングのサポートを追加しました。
  • クロンバックのアルファ係数:アンケート項目の内部一貫性を評価するためのクロンバックのアルファ係数の算出をサポートしました。測定尺度の信頼性を評価、分析できます。
  • ポリコリック相関:相関分析、因子分析、主成分分析(PCA)、クロンバックのアルファ係数において「ポリコリック相関」をサポートしました。
  • 混合相関:相関分析、因子分析、主成分分析(PCA)、クロンバックのアルファ係数において「混合相関」をサポートしました。
  • 決定木:決定木のノード表示を改善しました。目的変数がロジカル型やカテゴリ型であれば積み上げバーと割合・行数の数値、数値型であればヒストグラムと平均値をノード内に直接表示するようにしました。
  • CHAID決定木:分岐やグループ構成に関する統計的詳細を備えたCHAID(カイ二乗自動相互作用検出)決定木を追加しました。不純度に基づくCART(分類と回帰)の手法に代わる、有意性ベースのアルゴリズムを提供します。セグメントの統計的根拠や変数間の関係を、視覚的かつ構造的な形式で理解できます。
  • 順序ロジスティック回帰:NPSカテゴリー(批判者、中立者、推奨者)のように、順序関係を持つカテゴリを持つ目的変数を分析するための順序ロジスティック回帰をサポートしました。

機能改善

データソース

  • Excelファイルのインポートにおいて、CSVファイルと同様にすべての行をスキャンしてデータ型を検出するように改善しました。先頭行に欠損値がある場合でも正確なデータ型が保証され、より信頼性の高いインポートが可能になります。
  • Oracle データベース向けにOracle OCIのサポートを追加しました。ODBCを使用する場合と比較して、接続およびデータインポートの速度が大幅に向上します。
  • 個別のRプロセスの生成に伴うオーバーヘッドを削減することで、SQLデータインポートのパフォーマンスを向上させました。これにより、SQLデータベースを使用する際のデータ読み込み時間が短縮されます。
  • ネットワークエラーなどでインポートに失敗した場合でも、編集したSQLクエリを保持するように更新しました。作業内容の消失を防ぎ、問題解決後に素早く再試行できます。
  • PostgreSQLのスキーマリストにマテリアライズド・ビューを含めるように更新しました。
  • RDSファイルのインポートにおいて、ファクター型とその特定のレベル(順序)を保持するように更新しました。
  • RスクリプトデータソースでOAuthトークンをサポートしました。Exploratory内で、サポートされているデータソースの既存トークンを使用できます。これにより、GoogleドライブなどのサービスからRスクリプト内で直接データを取得することが容易になります。

データラングリング(データ加工)

  • 「フィルタ」および「条件を指定して値を置換」ダイアログに、「数値である(is number)」および「テキストである(is text)」演算子を追加しました。
  • 後続のステップで使用されている列の名前変更や選択・解除を行う際に、検証チェックと確認ダイアログを表示するようにしました。名前変更の場合は、その列を参照しているすべての箇所を検出し、参照を自動的に更新できます。
  • 無効化されたステップのコメントを編集できるようになりました。
  • キャッシュされたステップにマウスを合わせると、そのステップがキャッシュされた日時を確認できるようになりました。
  • count_ifやその他のcount_x関数を簡素化し、引数としてrow_number()関数を必要としないようにしました。これらは、チャート内のカスタム計算や、「集計(Summarize)」、「計算を作成(Create Calculation)」ステップで使用できる関数です。

チャート

  • ピボットテーブル:「列」に2つ以上の列を追加できるようになりました。
  • 表計算:「その他」メニューの下にすべての表計算オプションを表示するようにしました。
  • ピボットテーブル:論理型の列を使用している場合、ピボットテーブルおよび集計テーブルの合計)に「TRUE/FALSEの数」と「TRUE/FALSEの割合」の集計関数を追加しました。
  • ピボットテーブル:既存のチャートの色オプションと同様に、ピボットテーブルのテキスト色と背景色にカスタムカラーピッカーを追加しました。
  • ピボットテーブル:行の合計をピボットテーブルの左側に表示するオプションを追加しました。
  • ピボットテーブル:ピボットテーブルおよび集計テーブルで「合計に対する割合」を計算する際、特定のグループ階層を選択できるオプションを追加しました。これにより、直近のグループや総計だけでなく、特定の親グループ(例:年間合計に対する割合)に対する比率を計算できます。
  • ピボットテーブル:多階層の行構造において、特定のレベルでのソートをサポートしました。
  • ピボットテーブル:ピボットテーブルおよび集計テーブルにおいて、非数値の接頭辞を無視して文字型の列を数値的にソートするオプションを追加しました。これにより、「Q1, Q2, … Q10」のようなラベルを、手動でレベル設定することなく正しくソートできます。
  • ピボットテーブル:ヘッダーセクションと値セクションに個別のフォント設定を追加しました。
  • ピボットテーブル:複数の列が割り当てられている場合、列レベルの小計をサポートしました。これにより、列グループ内の各カテゴリーの小計を確認できます。
  • ピボットテーブル:他の列の値に基づいた条件付き書式(色付け)をサポートしました。例えば、別の列の利益率がプラスかマイナスかに基づいて売上数値を色付けするなど、関連する指標に基づいたハイライトが可能です。
  • ピボットテーブル:値のフォーマットダイアログで合計表示をオフにした場合、行合計の列全体を非表示にするように更新しました。
  • ピボットテーブル(総計):集計関数の設定をメインの総計コントロールエリアに移動し、設定を集約しました。個別のフォーマットダイアログを探すことなく、1箇所で合計や小計を簡単に設定できます。
  • リファレンスライン(基準線):プロットエリアにテキストを表示する際の設定に「値のみ」オプションを追加しました。ラベルなしで数値のみを表示できるため、チャートの外観がすっきりします。
  • 値の表示:バーチャート上で、実数値とパーセンテージの両方を同時に表示できるようになりました。
  • 値の表示:Y1とY2の両方の値を表示するか、片方のみを表示するかを選択できるようになりました。
  • Y1軸とY2軸を独立して同期させる機能を追加しました。
  • X軸・凡例・繰り返しのテキスト折り返し:X軸、凡例、繰り返しのタイトルにおける長いラベルのテキスト折り返しと省略記号(…)をサポートしました。アンケートデータによく見られる長いカテゴリー名も、重なったりチャートエリアからはみ出したりすることなく、きれいに表示されます。

アナリティクス

  • カイ二乗検定:標準化残差チャートを追加しました。
  • カイ二乗検定:ピボットテーブル内でパーセンテージと実数の両方を同時に表示できるようになりました。
  • 因子分析、対応分析、主成分分析(PCA)のレポートを、ユーザー中心の分析フローに焦点を当てて大幅に刷新しました。
  • 主成分分析(PCA):PCAバイプロットに相関円を描画するオプションを追加しました。変数と主成分の関係を視覚化し、変数の寄与の強さと方向を解釈しやすくします。
  • 主成分分析(PCA):PCAウェイトテーブルにおいて、割合の代わりに元の負荷量を表示するオプションを追加しました。詳細な統計的解釈や報告に好まれる生の因子負荷量を確認できます。
  • 主成分分析(PCA):PCA負荷量テーブルのヒートマップをバースタイルのインジケーターに置き換え、詳細な解釈ガイドラインを追加しました。
  • 主成分分析(PCA):累積寄与率チャートに色分けされたセルを採用し、説明を改善しました。選択した主成分の数によって、各元の変数がどの程度適切に表現されているかを素早く特定できます。
  • 対応分析:分割表などの集計済みデータのサポートを追加しました。個票データ(ローデータ)がなくても、ピボット形式でまとめられたデータに対して分析を実行できます。
  • 因子分析:因子数1のサポートを追加しました。特定のアンケート質問群が、研究デザインの意図通りに単一の潜在構造を効果的に測定しているかどうかを検証できます。
  • 因子分析:因子分析の負荷量テーブルを視覚的なバーを使用するように更新し、解釈ガイドラインを追加しました。
  • 因子分析:スクリープロットを、固有値用と平行分析用の2つの独立したチャートに分離しました。これにより、因子数を決定する際の異なる基準をより明確に区別できます。
  • 因子分析:異なる平行分析手法(因子モデルとSMC)のサポートを追加しました。共通性の推定や因子数の決定方法において、高度なユーザーに柔軟性を提供します。
  • 因子分析:因子得点係数行列の表示をサポートしました。新しいデータの因子得点を算出するために必要な係数が得られ、予測目的での分析の有用性が高まります。
  • 因子分析:デフォルトの回転法を「Varimax(バリマックス)」から「Promax(プロマックス)」に変更しました。因子間に関連があることが多い社会科学の一般的な慣行を反映し、より自然で解釈しやすい結果が得られます。
  • ロジスティック回帰:レポートにマクファデン(McFadden)の決定係数、カイ二乗値、自由度を追加しました。モデルの適合度や統計的有意性をより包括的に理解できます。
  • 2値予測モデル:混同行列(Confusion Matrix)テーブルを刷新し、パーセンテージと件数を同時に表示するようにしました。
  • 2値予測モデル:適合率-再現率(Precision-Recall)曲線チャートを追加しました。
  • 2値予測モデル:「推奨カットオフポイント」機能を追加しました。適合率と再現率のバランスが最適な閾値を提案します。見逃しや誤報の最小化など、特定のビジネスニーズに基づいたより良い分類決定を支援します。
  • 多クラス分類モデル:カテゴリー型の目的変数に対して、ROCチャートと予測確率分布チャートを「One-vs-Rest(一対他)」アプローチを使用するように刷新しました。モデルが各カテゴリーを他のカテゴリーとどの程度区別できているかを視覚化しやすくなります。
  • 対応のあるt検定 / ウィルコクソンの符号付順位検定:行をペアリングするためのキー列を指定できる機能を追加しました。データが被験者ごとに完全にソートされていない場合でも、正確に対応のある分析を実行できます。
  • ガイド付き分析の結果をノートに直接エクスポートするオプションを追加しました。テキストやチャートをコピー&ペーストする手間をかけずに、複数の分析結果を1つのドキュメントに素早くまとめて共有できます。

ダッシュボード

  • チャート選択ダイアログを更新し、一度に複数のチャートを挿入できるようになりました。

ノート

  • チャート選択ダイアログを更新し、一度に複数のチャートを挿入できるようになりました。
  • ノートからWordドキュメントへのMermaidフロー図のエクスポートをサポートしました。
  • PDFエクスポート時のページ余白を改善し、H1ヘッダーの前に自動的に改ページが入るようにしました。

バージョン管理

  • 変更履歴に検索およびハイライト機能を追加しました。

バグの修正

AI機能

  • AIサマリーの「コメントに追加」ボタンを使用する際、コメント入力フィールドが消えてコメントが追加できなくなる問題を修正しました。
  • AIチャットのストリーミング出力がちらつく問題、およびユーザーの操作なしに実行ステータスの結果が自動的に開く問題を修正しました。

AIプロンプト

  • AIが生成した加工ステップの「編集」ボタンをクリックすると、Rスクリプトエディタのインターフェースが壊れるUIの問題を修正しました。
  • インポートされたプロジェクト内のAIプロンプトステップにおいて、AI利用規約に同意していない場合にチャートビューからステップを開けない問題を修正しました。
  • AIデータソースの導入後、AIプロンプトのUIストリーミングがスムーズでなくなり、ぎこちなくなる問題を修正しました。

データソース

  • サービスアカウントのJSONファイルが元の場所から移動または削除されている場合、Google BigQueryのインポート画面がフリーズする問題を修正しました。
  • ファイルのインポートおよび結合プロセス中に表示されるサンプルデータが、実際のソースファイルにある行数よりも少なく表示される問題を修正しました。
  • 複数のシートがあるExcelファイルをインポートする際、2番目のシートを選択して「適用」をクリックしても、誤って最初のシートのデータが表示・インポートされる問題を修正しました。

サマリービュー

  • サマリービューの相関モードで目的変数として使用されている列を削除すると、割り当てを解除できなくなる永続的なエラーが発生する問題を修正しました。

データラングリング(データ加工)

  • ファクター型の列に対してフィルタダイアログを開いた際、デフォルトの演算子が選択されない問題を修正しました。
  • パラメータが変更されていないにもかかわらず、加工フロー内のデータソースステップが誤って黄色の「古い(stale)」ステータスを表示する問題を修正しました。
  • ファクター型の列のフィルタドロップダウンに、空の値やNULL値が誤って表示される問題を修正しました。
  • Rセッションの再起動やプロジェクトの再開後に、モデルのメモリポインタが失われるため、XGBoost予測ステップが「invalid externalptr」エラーで失敗する問題を修正しました。
  • ブランチを削除した後に、データフレームフローに重複したブランチが表示される問題を修正しました。
  • ドラッグ&ドロップによって子ブランチを親のルートより前のステップに移動できてしまい、データフレームの階層構造が壊れてUIの不整合が生じる問題を修正しました。

アナリティクス

  • テストモードが有効なランダムフォレストなどのツリーベースモデルにおいて、分類閾値パラメータを変更してもテストデータの混同行列が更新されない問題を修正しました。
  • プロジェクトを開いた直後に、アナリティクスビューに「元のデータが変更されました」という警告が表示される問題を修正しました。
  • Exploratoryで生成された主成分分析(PCA)のスコア結果が、SPSSで生成されたものと異なる問題を修正しました。

チャート

  • データグルーピングを含むステップにチャートがピン留めされている場合、緯度経度マップのレンダリング時にエラーが発生する問題を修正しました。
  • 「繰り返し」設定がされているチャートにおいて、HTMLプレビューの表示やノートのPDFエクスポート時にレンダリングに失敗する問題を修正しました。
  • ピボットテーブルにおいて、行ヘッダーと列ヘッダーの特定の組み合わせで小計を計算する際に発生するクラッシュを修正しました。
  • ピボットテーブルにおいて、小計の計算中に異なるレベルを持つ順序付きファクターを結合しようとするとエラーが発生する問題を修正しました。
  • ピボットテーブルにおいて、欠損値に対して「0で埋める」設定を適用すると、既存のセルの値が誤って変更される問題を修正しました。
  • ピボットテーブルにおいて、行シェルフに列が割り当てられていない場合に、色/バー設定の「行」オプションが表示されない問題を修正しました。
  • バーチャートにおいて、数値列をテキストスケールのX軸として使用し、色でグループ化した場合に、値ラベルの配置がずれる問題を修正しました。
  • テーブルチャートにおいて、特定のセル幅でテキストの折り返しに失敗し、テキストが省略記号で切り捨てられる問題を修正しました。
  • テーブルチャートにおいて、テキストの折り返しによって行が複数行にわたる場合に、視覚的なバーが極端に太くなる問題を修正しました。
  • 密度チャートにおいて、特定の「バンド幅」オプションを選択するとエラーが発生する問題を修正しました。
  • ピボットテーブルにおいて、空のセルに対して条件付き背景色の設定が正しく適用されない問題を修正しました。
  • チャート設定のドロップダウンから「カスタム」を再選択すると、空のダイアログが開き、既存のカスタム計算の削除を強制される問題を修正しました。
  • Y2軸に「ライン + 円」マーカーを選択すると、バーチャートのバーが壊れる問題を修正しました。
  • チャートの小数点以下の桁数設定が、フォントサイズフィールドの値を予期せず継承してしまう問題を修正しました。
  • ピボットテーブルをフラット行モードで表示する際、定義されたファクターの順序が尊重されない問題を修正しました。
  • アナリティクスから作成された新しいデータフレームのサムネイル画像が、ホバーポップアップに表示されない問題を修正しました。
  • 複数のY軸値を持つバーチャートにおいて、1つのマーカーを「ライン + 円」に設定すると、バーが切り取られたり誤ってレンダリングされたりする問題を修正しました。
  • 複数の行列がありテキスト折り返しが有効なピボットテーブルにおいて、親行のテキストが折り返された際に子行のセル高さが不一致になる問題を修正しました。
  • ピボットテーブルにおいて、ヘッダーの中央揃えの計算にテーブル右側の空きスペースが含まれてしまい、テキストが中心からずれて表示される問題を修正しました。
  • ピボットテーブルの行レベルの合計値に対して、数値フォーマットの設定が正しく適用されない問題を修正しました。
  • 「繰り返し」を使用しているピボットテーブルにおいて、テーブル本体にスクロールバーがない場合にスクロールが困難になる問題を修正しました。
  • ピボットテーブルにおいて、「繰り返し」機能を使用している際の「グループ内での下方向」および「グループ内での下および横方向」のウィンドウ計算が正しくない問題を修正しました。
  • 「繰り返し」を使用したチャートにおいて、凡例が占めるスペースが水平幅の計算に考慮されておらず、軸ラベルが重なる可能性がある問題を修正しました。
  • データフレームを返すカスタムチャートを表示する際、ローディングスピナーがすぐに表示されず、テーブルのレンダリング後に不要なちらつきが発生する問題を修正しました。

ダッシュボード

  • 余白のないピボットテーブルを含む長いダッシュボードにおいて、テーブル上でのマウス操作がスクロールイベントを奪ってしまい、ダッシュボードページ全体のスクロールが困難になる問題を修正しました。
  • ダッシュボードを実行してチャートの詳細を表示した後に、ノートを開いたり切り替えたりできなくなる問題を修正しました。

ノート

  • ノートエディタで2列レイアウトボタンを2回クリックすると、意図しないネストされたレイアウトが表示される問題を修正しました。
  • 新しいノートを作成する際、閉じたり削除したりできない空の画面が表示されることがある問題を修正しました。
  • 新しいノートを作成する際、Enterキーでダイアログを確定できない問題を修正しました。
  • ノートエディタを開くとCmd+Rショートカットキーが誤って上書きされ、Exploratoryがアクティブな間に他のアプリケーションで機能しなくなる問題を修正しました。
  • ノートの「最終更新日時」が編集中にリアルタイムで更新されず、変更が保存されているか混乱を招く問題を修正しました。

インストール

  • Exploratory Hosted Serverにログインしているユーザーのデスクトップ版において、アップデート通知ボタンが表示されない問題を修正しました。
  • 「Rパッケージのリセット」プロセスにおいて、他のプロジェクトが開いていないにもかかわらず、他のプロジェクトを閉じるようにというメッセージが表示され、リセットが妨げられる問題を修正しました。
  • Apple Silicon搭載のMacにおいて、Gitを手動でインストールしていても、「Bad CPU type」エラーによりGitのインストールプロセスが失敗したりループしたりする問題を修正しました。
  • ネットワークの問題でダウンロードが失敗しているにもかかわらず、Rインストーラーのプログレスバーが誤って81%に達する問題を修正しました。

プロジェクト

  • 多数のデータフレームを含む大規模なプロジェクトを開くと、「Too many open files(開いているファイルが多すぎます)」エラーが発生する問題を修正しました。
  • 変更履歴の検索結果からプロジェクトを以前のバージョンに復元する際、一部のケースで状態が正しく戻らない問題を修正しました。
  • プロジェクトの変更履歴で検索キーワードを入力し、Enterキーを押すとキーワードが自動的にクリアされる問題を修正しました。

パブリッシュ

  • セッションパラメータを含む公開済みダッシュボードにおいて、デスクトップ版から送信されるステップのメタデータが不完全なため、「error code 127」で開けない問題を修正しました。

v15.7

リリース日

2026年11月4日

問題の修正

プロジェクト

  • 「Failed to start Rserve daemon. (Could not find process.)」というエラーが繰り返し記録されてプロジェクトを開く、または作成することができない不具合を修正しました。

v15.6

リリース日

2026年6月11日

機能強化

チャート

  • 「色」に列を割り当てていない場合でも、トレンドラインの色を変更できるようになりました。

ノート

  • ノートとダッシュボードの設定において、前回のセッションの「データを再インポートする」の設定を記憶するように更新されました。これにより、データの再インポートを忘れたままレポートを公開したり実行したりすることを防ぎ、作業時間の短縮と手動設定によるミスの削減につながります。

問題の修正

アナリティクス

  • ランダムフォレストで二値分類(データを2つのグループに分類する手法)モデルを作成する際、特定のターゲットクラスのすべての行において、数値予測変数に欠損値が含まれていると、エラーメッセージが表示されず空白の結果が返される問題がありました。この問題は修正され、データの除外によってサンプルが不足した場合でも、適切なエラーと対策が通知されるようになりました。

チャート

  • ダッシュボードやノートのチャートで「詳細を表示」をクリックした際に、「transform.getDisplayName is not a function」というエラーが発生する問題が解決されました。

ダッシュボード

  • パラメーターを変更した際、ダッシュボード上のカスタムRチャート(HTMLウィジェット)が更新されず、「コピー対象のファイルが存在しません」というエラーが発生する問題が解決されました。この修正により、ダッシュボード環境内で動的なカスタムチャートが正しく更新されるようになります。

パラメーター

  • ノートから特定のチャートにジャンプした際、もとのパラメーターで選択された値で実行されていた時とは異なるデータが表示される問題が修正されました。
  • パラメーターペインでパラメーターをリセットした際、セッションパラメーター(ユーザーの権限などに基づいてデータを制限する機能)のフィルターによって制限されるべき値が誤って表示される問題が修正されました。リセット操作後も、セッションベースのアクセス制御が正しく適用されるようになりました。

Rスクリプト

  • Rスクリプトをクリックした際に、以前に開いていたRスクリプトの内容が表示されてしまう問題が修正されました。

v15.5

リリース日

2026年6月7日

製品の強化

アナリティクス

  • CatBoost(カテゴリ変数の扱いに長けた機械学習モデル)のサポートを追加しました。CatBoostの優れたカテゴリ変数処理能力と高度なブースティング技術を活用して、より高い予測精度を実現できます。
  • XGBoostにおいて、L1およびL2正則化パラメータ(alphaおよびlambda)のサポートを追加しました。これにより、過学習(モデルが学習データに過剰に適合し、未知のデータへの予測精度が落ちること)を防ぎ、より汎用性が高く安定したモデルをUIから直接作成できるようになりました。
  • 決定木、ランダムフォレスト、XGBoost、LightGBM、CatBoostの機械学習プロパティダイアログを刷新しました。モデルの複雑さやバリデーション(検証)といった共通設定のグルーピングを改善し、説明をより明確にしました。これにより、モデルの精度や安定性を高めるためのチューニングを、より直感的に行えるようになります。
  • K-Meansクラスタリングにおいて、シルエット法のサポートを追加しました。従来のエルボー法と比較して、最適なクラスター(グループ)数をより客観的に判断できるようになり、主観を抑えた信頼性の高いグルーピング結果が得られます。
  • K-Meansクラスタリングのサマリーテーブルにシルエットスコアを追加しました。各クラスターレベルで、データがどれだけ適切にグループ化されているかを評価できるようになりました。
  • 1標本の比率検定のサポートを追加しました。サンプルの比率を目標値と比較する基本的な統計検定を実行できるようになりました。
  • 1標本のt検定のサポートを追加しました。サンプルの平均値が、想定される母集団の平均値と統計的に有意な差(偶然とは言い切れない差)があるかどうかを判断できます。平均配送時間や評価、その他の連続的な指標に関する仮説の検証に役立ちます。
  • 2標本の比率検定(サンプル数が少ない場合のフィッシャーの正確検定を含む)のサポートを追加しました。2つの独立したグループ間の成功率を統計的に比較できるようになり、A/Bテストやコンバージョン分析において不可欠な分析が可能になります。

データラングリング(データ加工)

  • 「Error Code 2」のエラーメッセージを改善し、メモリ不足やプロセスの中断など、考えられる原因についての情報を追加しました。これにより、タスクが失敗した理由と解決に向けたステップをより正確に把握できるようになります。
  • エラーメッセージにコピーアイコンを追加し、ポップアップの挙動やフォントサイズを改善しました。UIの改善により、エラー情報の確認がしやすくなります。

ノート

  • Markdownテーブル内の各列の幅を、ドラッグ・アンド・ドロップで設定できるようになりました。

不具合の修正

AIサマリ

  • AIサマリが一度も作成されていないアナリティクスを複製し、そのAIサマリをクリックした際に、更新確認ダイアログが誤って表示される問題を修正しました。
  • 特定のタイプのアナリティクスにおいて、サーバー側のマッピング不足や信頼区間データの可視化IDの誤りにより、AIサマリが失敗する問題を修正しました。
  • AIサマリの言語設定が、生成される出力に正しく適用されない問題を修正しました。

AIプロンプト for データ加工

  • 既存のステップを再度開いた際、AIプロンプトダイアログのリセットボタンを押してもRスクリプトの変更が元に戻らない問題を修正しました。

アナリティクス

  • 元のデータが空であるか、フィルタによってデータがなくなった場合に、アナリティクスの実行が「cannot read properties of null (reading ‘name’)」というエラーで失敗することがある問題を修正しました。

チャート

  • 数値スケールを自然対数に設定した際、散布図のリファレンスライン(基準線)が消失する問題を修正しました。

データソース

  • CSVファイルのインポート時、年が2桁で表記されている場合に、日付データがDate型やPOSIXct型(日時型)として正しく認識されない問題を修正しました。
  • Googleドライブ上のCSVファイルを削除し、同じ名前で再アップロードした際、再インポートを行ってもデータが更新されない問題を修正しました。
  • GoogleドライブのCSVソースにおいて、ファイルが存在しているにもかかわらず、ファイル選択画面で「選択されたファイルが存在しません」という誤ったエラーが表示される問題を修正しました。
  • CSVデータソースファイルを置換する際、使用しているファイルとは無関係な列の欠落エラーが発生することがある問題を修正しました。
  • 「インポートしてマージ」のデータソースのステップダイアログからParquetデータを更新する際、JavaScriptの「e.forEach is not a function」エラーが発生する問題を修正しました。

インストール

  • データインポート中に、OSの一時ディレクトリへのファイル書き込みエラーが表示される問題を修正しました。
  • 一部のシステムでの初回Rインストール時に自己署名証明書エラーが発生し、セットアップが完了できない問題を修正しました。

ノート

  • ノート内でデータを再インポートする際、稀に「Cannot read properties of undefined (reading ‘deps’)」というエラーが発生する問題を修正しました。
  • 2列レイアウトのサイズ変更アイコンをクリックした際、フレームのサイズ変更ではなくリロードが実行されることがある問題を修正しました。
  • ノートでのデータ再インポート時に、プログレスインジケーター(進捗表示)が不完全であったり、データソースステップの最終更新日時が更新されない問題を修正しました。

パラメータ

  • 閲覧権限のないセッションパラメータの値が、パラメータダイアログに残ってしまう問題を修正しました。
  • パラメータダイアログのリセットボタンを押しても、実行後にパラメータの値がデフォルトに戻らない問題を修正しました。
  • ユーザーアカウントを切り替えた際、セッションパラメータに依存するパラメータの値リストが動的に更新されない問題を修正しました。

バージョン管理

  • 履歴に操作の詳細が正しく記録されず、具体的なアクション内容の代わりに「Updated(更新済み)」という汎用的なメッセージが表示される問題を修正しました。

AIチャット

  • チャットにファイルを添付すると緑色の枠が表示され、アプリケーションを再起動するまで操作不能になる問題を修正しました。

v15.4

リリース日

2026年5月29日

問題の修正

インストール

  • ノートのプレビュー時に「このバージョンのExploratoryは、今後のmacOSリリースでは開けません」という警告メッセージが表示される問題がありました。調査の結果、Exploratory自体はRosettaを必要とせずApple Siliconに完全対応していましたが、ノートで使用される同梱のPandocバイナリが依然としてx86_64(Intel用)実行ファイルであったことが判明しました。これをApple ARM互換バージョンに差し替えました。

データラングリング(データ加工)

  • ステップ・ダイアグラムのダイアログに最大幅の制限があり、一定以上のサイズ変更ができないため、複雑なワークフローの視認性が制限される問題がありました。

チャート

  • チャート・ビューで異なるチャートを切り替える際、以前のバージョンと比較して5〜10秒程度の著しいパフォーマンスの低下や遅延が発生する問題がありました。

アナリティクス

  • プロジェクトを再度開いた後にデータを再インポートすると、XGBoostの予測ステップでエラーが発生する問題がありました。

ダッシュボード

  • パラメータの参照列の名前が変更された際、後続のステップが未定義のデータフレームを参照してしまい、Rオブジェクトの更新エラーでダッシュボードの実行が失敗する問題がありました。

Note

  • ノート内でデータを再インポートした後、動的パラメータの値リストが更新されず、パラメータリストを生成している特定のデータフレームを手動で再インポートする必要がありました。

Rパッケージ管理

  • 既にインストール済みのRパッケージをインストールしようとした際、「別のRプロセスが実行中です」という不適切なエラーが表示される問題がありました。本来はパッケージが既にインストールされている旨を伝える適切なメッセージを表示すべきでした。
  • パッケージのインストール中に、関数名のマスキング(上書き)に関する警告を確認すると、Rパッケージ・ダイアログが途中で閉じてしまう問題がありました。インストール状況を確認できるよう、ダイアログを開いたままにするよう修正しました。

v15.3

リリース日

2026年5月24日

機能強化

データソース

  • Oracle DB: Oracle接続設定に専用のフェッチ・バッファ・サイズ(FBS)フィールドが追加され、データインポートのパフォーマンスが向上しました。この設定により、ネットワークの往復回数の最適化が容易になり、データの読み込みが高速化されます。デフォルトサイズは10MBに設定されており、データサイズによっては100倍から300倍のパフォーマンス向上が期待できます。
  • Treasure Data: 複雑なTreasure Dataのワークフローで必要となることが多い、DROP TABLEコマンドを含むSQLクエリをサポートしました。これにより、ユーザーはテーブル制限に達することなく、SQLスクリプト内で一時テーブルを直接管理できるようになります。

データラングリング(データ加工)

  • 計算の作成: 計算式の最終行に「#」記号で始まるコメントを追加できるようになりました。

AIプロンプト

  • Enterキーを押してもAIプロンプトが実行されないようになりました。代わりに、Cmd/Ctrl + Enterキーで実行できます。これにより、入力中に誤ってEnterキーを押してAIプロンプトを実行してしまうことを防ぎます。

チャート

  • 散布図のトレンドラインのメトリクスにおいて、相関係数の値をプロット上に表示できるようになりました。
  • バーチャートにおいて、バーが1本しかない場合でもバーの太さを調整できるようになりました。

プロジェクト

  • システム構成UIに、メモリ割り当てを手動で調整できる新しい設定が追加されました。これは、「vector memory exhausted(ベクトルメモリ不足)」エラーを解決するために、Rプロセスにより多くのメモリサイズを割り当てたい場合に便利です。
  • システム構成で、すべてのAI機能を無効にできるようになりました。これは、データのプライバシー要件が厳しいユーザーや、AIの使用に関する組織的なポリシーがあるユーザーにとって重要です。

不具合修正

データソース

  • 以前のバージョンでEDFファイルのインポートが著しく遅かった問題を修正しました。EDFインポートパスのパフォーマンス問題を解決し、共有データファイルを迅速に読み込めるようにしました。
  • Oracleのデータインポートが「待機中」状態のままになったり、他のSQLツールと比較して過度に時間がかかったりする問題を修正しました。Oracleインポートプロセスのパフォーマンスのボトルネックを解消し、タイムリーなデータ取得を可能にしました。
  • データにNULバイトが含まれている場合に、Parquetファイルのインポートが誤解を招くCSVエンコーディングエラーで失敗する問題を修正しました。正確なエラーメッセージを表示し、根本的なArrowからRへの変換問題に対処することで、Parquetのインポートを成功させました。
  • 複数のSQLデータソースを同時に再インポートしようとしたときに発生するRプロセスの競合を修正しました。Rプロセスの実行をより効果的に管理し、競合を防いでバッチ再インポートを確実に実行できるようにしました。
  • クエリの結果が0行の場合にSQLエディタの「更新」ボタンが反応しなくなり、クエリの変更を保存できなくなる問題を修正しました。現在の結果セットが空であっても、SQLスクリプトを保存および更新できるようになりました。
  • 前回の実行でデータが返されなかった場合に、エディタを再度開こうとするとSQLインポートダイアログが予期せず閉じ、「getDataType」エラーが発生する問題を修正しました。UIのクラッシュを防ぎ、エディタを確実に再度開けるようにしました。

データラングリング(データ加工)

  • 複雑なデータの更新がある場合に、データの再インポートのパフォーマンスが低下していた問題を修正しました。
  • Mutate(計算を作成)ダイアログで新しい行の先頭に算術演算子を配置すると、Rがパースエラーをスローする問題を修正しました。実行時に内部的に改行を削除するようにしたため、手動で調整することなく複数行の数式が正しく処理されます。

AI機能

  • AI機能をサポートしていないサーバーに接続している場合でもAI機能メニューが表示され、空のサブメニューが表示される問題を修正しました。機能が利用できない場合はAI関連のメニューを非表示にし、ユーザーの混乱を避けるようにしました。

チャート

  • ノートドキュメントにおいて、凡例を上部に配置するとチャートのタイトルと凡例が重なってしまう問題を修正しました(チャートビューでは正しく表示されていました)。ノート内でのレンダリングロジックを修正し、明確で読みやすいチャートレイアウトを確保しました。
  • 「カスタム」チャートで入力したRコードが、プレビューや保存をクリックせずに別のデータフレームに移動すると消えてしまう問題を修正しました。移動中もカスタムチャートのコードが保持されるようにし、作業内容の消失を防ぎました。
  • チャートが「繰り返し」設定で構成されている場合に、「軸の目盛り間隔」オプションが正しく機能しない問題を修正しました。カスタムの目盛り間隔が、繰り返されるすべてのチャートパネルに一貫して適用されるようにしました。
  • チャートの「繰り返し」機能を使用しているときに、「目盛りラベルの自動スケーリング」オプションが表示されない問題を修正しました。マルチパネルのチャートレイアウトでも、読みやすさを向上させるために軸ラベルを自動的にスケーリングできるようになりました。
  • ダッシュボードでチャートのタイトルを非表示にすると、チャート上のダウンロードボタンが消えてしまう問題を修正しました。タイトルの表示設定に関わらず、ダウンロード機能を引き続き利用できるようにしました。
  • チャートをEDF形式でエクスポートした後にUIが反応しなくなり、緑色の境界線が表示される問題を修正しました。エクスポート後の状態に関する問題を解決し、再起動することなくアプリケーションの操作を継続できるようにしました。

アナリティクス

  • ANCOVA(共分散分析)のUIにおいて、複数の共変量が結果のモデルに反映されず、最初に選択されたものだけが処理される問題を修正しました。指定されたすべての共変量が統計計算に正しく含まれるようにしました。

ノート

  • メインウィンドウから別のノートに切り替えたときに、AIノートエディタで行った編集が警告なしに失われる問題を修正しました。ノートの移動中にテンプレート編集内容をサイレントで自動保存する機能を実装し、作業内容が保持されるようにしました。
  • ダイアログを閉じて再度開いたときに、AIエディタが最後に選択したテンプレートや編集したテキストを記憶していない問題を修正しました。エディタの状態が保持されるようにし、プロンプトを再選択したり再編集したりする手間を省きました。
  • 別のウィンドウに切り替えてから戻ると、ノートエディタからカーソルが消え、入力を再開するために余分なクリックが必要になる問題を修正しました。エディタが自動的にフォーカスを取り戻すようにし、よりシームレスな執筆体験を提供します。
  • 箇条書きボタンをクリックした後にノートエディタのカーソルが消え、入力を再開するために手動でクリックが必要になる問題を修正しました。カーソルがアクティブなまま正しい位置に保持されるようにし、中断することなく執筆を続けられるようにしました。
  • 異なるノート間を移動するときに、選択したプロンプトテンプレートと入力テキストが消えてしまう問題を修正しました。ノートの選択をまたいでもAIノートエディタの状態が維持されるようにし、ワークフローの継続性を向上させました。
  • コンテンツがAI生成テキストに置き換えられた後、履歴からノートの以前のバージョンを復元できない問題を修正しました。AIによる変更後も、履歴と復元機能が正しく動作するようにしました。
  • フロー図ブロックにおいて、切り離されたDOM要素やツールチップのインスタンスがリークし、時間の経過とともにメモリ使用量が増加する可能性がある問題を修正しました。コンポーネントがアンマウントされる際に適切なクリーンアップロジックを実行するようにし、アプリケーションの安定性とパフォーマンスを確保しました。

パラメータ

  • バージョン15以降、パラメータペインと階層的な関係にあるパラメータの値の更新に関するダッシュボードのパフォーマンスが著しく低下していた問題を修正しました。パラメータUIの応答速度の低下や無反応を改善し、スムーズなユーザー体験を復元しました。

プロジェクト

  • 複数のウィンドウからの同時書き込みや、保留中のステージングされた更新により、プロジェクトが破損したり古いメタデータで上書きされたりする問題を修正しました。
  • Windowsユーザーがサーバー上の最新バージョンと同期してプロジェクトを更新する際に発生していた「接続エラー」を修正しました。

インストール

  • 一部のユーザーにおいて、v15へのアップグレード中にRのインストールプロセスが途中で停止し、アップデートを完了できない問題を修正しました。インストールのボトルネックを解消し、新しいバージョンへのスムーズな移行を可能にしました。

v15.2

リリース日

2026年5月19日

機能強化

チャート

  • チャートのAIサマリーで、「予測範囲」ではなく「推定範囲」という表現を使用するように変更しました。また、使用している確率タイプ(例:90%範囲)をサマリーテキストに含めるようにしました。

修正された問題

プロジェクト

  • Exploratory Serverから更新されたプロジェクトをインポートしようとした際、プロジェクト一覧の「更新」ボタンをクリックすると「Project Not Found」エラーが発生する問題を修正しました。

v15.1

リリース日

2026年5月18日

修正された問題

インストール

  • v15へアップグレード直後、または既存プロジェクトを開いた際に、「File already exists」エラーが発生し、アプリケーションにアクセスできなくなることがある問題を修正しました。

データソース

  • データフレームがたくさんあり、それらの関係が複雑なプロジェクトでSQLデータを再インポートする際、不要なカタログ読み込み処理によりUIが最大1分ほどフリーズすることがある問題を修正しました。読み込みロジックを最適化し、アプリケーションの応答性を維持したまま、遅延なく再計算が開始されるよう改善しました。
  • v15へのアップグレード後、SQLデータの再インポート速度が、従来の約5秒から1分以上に低下していた問題を改善しました。
  • 後続ステップのエラーによってデータ再インポートが失敗した際、実際とは異なる操作を参照した分かりづらいエラーダイアログが表示される問題を修正しました。

チャート

  • フィルターダイアログの「X」ボタンをクリックしても、ウィンドウが閉じないことがある問題を修正しました。
  • チャートやアナリティクスレベルにおいて、フィルターやステップをドラッグ中に境界線が過剰に点滅する問題を改善しました。
  • フィルターダイアログを入力せずに閉じた後、次回クリック時にダイアログが開かず、2回目のクリックが必要になる問題を修正しました。

ノート

  • ノートの「名前を編集」メニューをクリックした際、名前変更ダイアログとノートエディタが同時に開いてしまう問題を修正しました。
  • v15へアップグレード直後、一時的にノートの内容が空に見えることがある問題を修正しました。(プロジェクトを再起動すると内容は再表示されていました。)

v15.0

リリース日

2026年5月13日

新機能 / 機能強化

全般

  • Apple Silicon搭載MacにExploratoryをインストールする際、事前にRosettaをインストールする必要がなくなりました。
  • Exploratoryの起動速度が大幅に向上しました。特に多くのプロジェクトを所有している場合に、その違いを実感いただけます。
  • 基盤となるRのバージョンを4.5にアップグレードしました。

サマリービュー

  • サマリービューに「外れ値モード」機能を追加しました。上部の「外れ値」ボタンをクリックし、分析したい変数(列)を選択すると、その変数の外れ値が他のすべての変数とどのように関連しているかが、ハイライトされたチャートと要約統計量で表されます。これにより、通常の範囲から外れたデータを迅速に特定し、分析することが可能になります。
  • サマリービューのチャート(ヒストグラム / バーチャート)から直接、「残す」、「除外する」、「詳細を表示」を実行できるようになりました。バーをクリックすることで、サマリービュー・レベルの行フィルタを作成したり、選択された値に関連する詳細データを確認したりできます。
  • サマリービューおよびテーブルビューの行フィルタを、データラングリングのステップ・エリア(右側)にドラッグ&ドロップできるようになりました。これにより、アドホックに作ったビュー・フィルタをデータフレームレベルのフィルタのステップとして簡単に変換でき、チャートやアナリティクス・ビュー間での一貫性を保つことができます。

データラングリング

  • 「データラングリング(データ加工)・ステップ・ダイアグラム」機能を追加しました。データ加工のステップ・エリア(右側)上部の「ダイアグラム」ボタンをクリックすると、結合(Join)やマージされたデータフレームを含む、データラングリングの手順を可視化したダイアグラムが表示されます。このダイアグラムは、分岐や結合、無効化されたステップなどの複雑なシナリオにも対応しています。関連したデータ加工のステップ全体を可視化することにより、エラー箇所の特定を含む、複雑なデータパイプラインのデバッグや理解が容易になります。
  • 「データラングリング(データ加工)・ステップの自動ドキュメント作成」機能を追加しました。ステップ・ダイアグラムのダイアログ内の「AIでテキストを生成」ボタンをクリックすることで、1) わかりやすいステップ名と説明の自動生成、2) データラングリング・ステップで何が起きているかを要約・解説するドキュメントの自動生成が可能になります。これにより、自分自身(およびデータの共有相手)が、各ステップを一つ一つ見ていくことなく、データがどのように加工されたのかを素早く理解できるようになります。
  • 生成されたデータラングリング・ステップに関するドキュメントは「ノート」として保存でき、必要に応じて内容を編集することが可能です。
  • 「AI 自動修正」機能を追加しました。データラングリング・ステップでエラーが発生した際、「AI 自動修正」ボタンが表示されます。このボタンをクリックすると、AIが問題を診断して解決策を提案します。提案された解決策を選択すると、内部APIが実行されて問題が修正され、データラングリング・ステップが更新されます。
  • 基盤となるRおよびRパッケージのアップグレードにより、特に「表計算」やcase_whenや ifelse といった関数の処理におけるパフォーマンスが向上しました。この改善は、「計算を作成」、「表計算」、「条件付き計算」、「条件付きで値を置換」などのステップに関係します。
  • AI プロンプト for データラングリング:AIが生成する説明をより簡潔にし、生成速度を向上させるため、「具体的な例」のセクションを削除しました。

チャート

  • すべてのチャートタイプに「AI サマリー」機能を追加しました。チャートビューの下で作ったチャートから、AIによるインサイトや解釈を素早く得ることができます。
  • データラングリングと同様に、チャートのエラーに対しても「AI 自動修正」機能を追加しました。無効な列名の割り当てエラーやカスタム計算の構文エラーなどの問題を、ガイド付きの自動インターフェースを通じて迅速に解決できます。
  • ユーザーが独自のRコードを書いてチャートが作れる「カスタムチャート」機能を追加しました。これにより、標準のUIでは提供されていない特殊なチャートを作成したい上級ユーザーに、無限の柔軟性を提供します。
  • チャートフィルタをデータラングリング・ステップのエリア(右側)に直接ドラッグ&ドロップして、基となるデータに適用できるようになりました。この機能により、特定のチャートフィルタを同じデータフレーム内の複数のチャートで共有できるようになります。
  • ピボットテーブル / 集計テーブル / テーブル:ドラッグ&ドロップで直感的にテーブルの列幅を変更できるようになりました。
  • ピボットテーブル / 集計テーブルにおいて、値、ヘッダー、合計のテキスト配置オプションをサポートしました。
  • ピボットテーブル / 集計テーブル:日付列で「年を抽出」オプションを使用する場合、デフォルトで3桁区切りのカンマなしで年を表示するようになりました。これにより、年が「2,025」のような数値形式ではなく、「2025」として正しく表示されるようになります。
  • フィルタが存在しない列を参照している場合、チャート上にエラーメッセージが表示されるようになりました。これにより、フィルタ条件が壊れているにも関わらずそれが無視され、有効なチャートであるように見えてしまうという問題を解消します。
  • ピボットテーブルおよび集計テーブル:列を「列」に割り当てた際、すべての列幅が一定に保たれるようになりました。これにより、テーブル内にバーを表示している場合などに、バーの長さを見て値の大小をより正確に把握できるようになります。
  • 「詳細を表示」ダイアログ:エクスポート・ボタンの下に「データフレームを作成」メニューを追加し、詳細データを素早く新しいデータフレームに変換できるようになりました。
  • 「詳細を表示」ダイアログ:検索ボックスを追加し、詳細データから特定のレコードを素早く見つけられるようになりました。
  • 「詳細を表示」ダイアログ:列ヘッダーをクリックしてデータをソートできるようになりました。デフォルトの順序は降順に変更され、値がバーで可視化されます。
  • 「詳細を表示」ダイアログのサイズ変更が可能になりました。

アナリティクス

  • すべてのアナリティクスタイプで「AI サマリ」をサポートしました。各アナリティクスで提示される情報の要約を素早く得ることができます。
  • アナリティクスのフィルタをデータラングリングのステップ・エリア(右側)に直接ドラッグ&ドロップして、基となるデータに適用できるようになりました。特定のフィルタを同じデータフレーム内の他のアナリティクスでも簡単に共有できるようになります。
  • ランダムフォレストのプロパティダイアログに「分割ごとにサンプリングされる変数の数(mtry)」と「ツリーの最大深度」のパラメータを追加し、デフォルトのツリー数を200に変更しました。
  • 相関分析のアナリティクスレポートを更新し、Spearman法における一部の指標名の修正と、仮説検定セクションの指標の説明を改善しました。
  • アナリティクス・ビュー下のテーブルにおいて、ドラッグ・アンド・ドロップを使った列幅の調整が可能になりました。

ノート

  • ノートエディタのウィンドウを開く際のパフォーマンスを改善しました。
  • ノート内のチャートに「ステップ・ダイアグラム」ボタンを追加しました。このボタンをクリックすることで、すべてのデータラングリング・ステップをソースまで遡り、数値やデータがどのように生成されたかを確認できます。これによりデータ生成における透明性が確保され、ノートで閲覧しているデータがどのように加工されたのかを理解しやすくなります。
  • AIノートエディタの「分析レポートを作成」に「読者レベル(Audience Level)」ドロップダウンを追加しました。これにより、AIが生成するサマリーの複雑さやトーンを、想定読者の専門レベルに合わせて調整できます。
  • AIノートエディタ:AIエディタに入力したカスタムプロンプトと以前に生成された出力が、アプリケーションの再起動後も保持されるようになりました。
  • AIノートエディタ:カスタムプロンプトで明示的に指示しない限り、チャートの解釈のテキストを表示しなくなりました。これにより、AIがユーザーの指示に厳密に従い、特定のタスクに対してより適切な出力ができるようになります。
  • (動作変更)これまでは、開いているノートを閉じずに別のノートを開こうとすると確認ダイアログが表示されていましたが、このバージョンより、確認なしで現在のノートを自動保存し、新しいノートを開くようになりました。
  • ノートエディタに「フローダイアグラム」ウィジェットを追加しました。Mermaid JSを使用しており、Mermaid JSの構文に従ってテキストを入力することで、ノート内にフローダイアグラムを視覚化する図を直接生成できるようになります。

ダッシュボード

  • ダッシュボードのウィンドウを開く際のパフォーマンスを改善しました。
  • ダッシュボード内のチャートに「ステップダイアグラム」ボタンを追加しました。チャート内の数値やデータが、どのようなデータ加工を経て生成されたかをソースまで遡って確認できます。これにより、ダッシュボードで表示されているデータの系統(リネージ)を容易に把握できます。

データソース

  • CSV:自動データ型検知ロジックを改善し、1) 様々な区切り文字(スラッシュ(/)など)や 2) 様々な順序(ymd、mdyなど)の日付形式をサポートしました。

プロジェクト

  • トップメニューエリア(左上)に「履歴」と「情報」ボタンを追加しました。これらの機能へのアクセスが容易になります。
  • プロジェクト情報ダイアログを開く際のパフォーマンスを改善しました。
  • 起動時に、Exploratoryのリポジトリ内にある不要な一時ファイル(一時ファイル、古いログファイル、古いRバージョン)を削除し、ディスク容量を解放するようになりました。

バージョン管理

  • コミット(保存)メッセージを改善し、プロジェクト履歴における特定の変更内容をより理解、追跡しやすくしました。

修正された問題

インストール

  • Windowsインストーラーにおいて、Exploratoryが実行されていないにもかかわらず実行中であると誤認され、アップグレードやインストールが妨げられる問題を修正しました。

データラングリング

  • 「重複行を削除」ダイアログをキャンセルすると、その後のフィルタ操作をブロックする空のステップが残ってしまう問題を修正しました。
  • カスタム関数を削除して再作成した後に、計算エディタで列の候補が表示されない問題を修正しました。
  • 上流のフィルタ結果が0行の場合にAI関数が失敗し、空のデータセットを適切に処理できずにクラッシュする問題を修正しました。

チャート

  • バーチャートの値ラベルの表示位置を「自動」に設定した際、値の配置がずれる問題を修正しました。
  • 標準リファレンスに含まれない関数を使用するカスタム計算がブロックされ、‘zoo’などの特殊なRパッケージを利用できない問題を修正しました。
  • ピボットテーブルにおいて、列数が増えるにつれてグリッド線がずれ、配置が乱れる問題を修正しました。
  • データフレームに重複した列名がある場合にピボットテーブルが失敗し、手動で列名を変更するまでチャートを生成できない問題を修正しました。
  • ピボットテーブルにおいて、POSIXct型の列の値の時刻「00:00:00」がデフォルトで非表示になり、データの誤認を招く可能性がある問題を修正しました。
  • 「基準線」メニューにおいて、設定されていないラインに対して「Undefined」と表示される問題を修正しました。
  • チャートの凡例で関連する項目を選択解除しても、チャート上に値ラベルが表示され続ける問題を修正しました。

アナリティクス

  • データに無限大が含まれている場合に、K-Meansクラスタリングが判読不能なエラーで失敗する問題を修正しました。
  • 単語カウント分析における共起ネットワークチャートのエクスポートメニューが表示されない問題を修正しました。
  • Spearman統計量の列が誤って「rho」値としてラベル付けされていた問題を修正しました。

ノート

  • 以前開いていたノートのカスタムプロンプトが、AIノートエディタに残ってしまう問題を修正しました。

ダッシュボード

  • 書き込み権限やパスの問題に起因するエラーにより、ダッシュボードの生成が失敗する問題を修正しました。

データソース

  • データインポートダイアログで明示的に設定したにもかかわらず、データの再インポート時にデータ型の設定が日付型(Date/POSIXct)から文字型(Character)に戻ってしまう問題を修正しました。
  • CSVインポートダイアログを再度開いた際に、データ型メニューが表示されない問題を修正しました。

プロジェクト

  • アップグレード後に、カスタムRパッケージを含むプロジェクトを開くと画面が白くなる問題を修正しました。

チャットサポート

  • デスクトップアプリ内のチャットウィンドウが崩れ、スクロールや新しいメッセージの送信ができなくなる問題を修正しました。

14.8

リリース日

2026年3月30日

問題の修正

データラングリング

  • データフレーム名、ステップ名、ノート名、ダッシュボードのページ名を変更しようとすると「a.getMarkdownContent is not a function」というエラーが発生していました。

アナリティクス

  • アナリティクスを実行した後も、古いデータの警告メッセージが消えませんでした。

14.7

リリース日

2026年3月23日

機能強化

チャート

  • コメントアイコンが、作成者のコメントだけでなく、閲覧者のコメントが存在する場合にも緑色に変わるようになりました。

AIアナリティクス

  • トピックモデルのデータがすでに単語化されている場合の、AIサマリーでの生データ表示を改善しました。

問題の修正

AIデータ加工

  • クリーンインストール後の初回実行時に、AIデータ加工ダイアログが空白の結果を返していました。

AI関数

  • AI関数の実行をキャンセルした後に再実行するとエラーが発生していました。

アナリティクス

  • 対応ありのウィルコクソン検定の結果がRの結果と異なっていました。

一般

  • AIサマリーを実行後にデータフレームを切り替えると、メモリリークにより動作が遅くなっていました。

14.6

リリース日

2026年3月17日

機能強化

テーブル・ビュー

  • サマリーチャート上に「チャート」ボタンが追加され、テーブル・ビューからでも素早くチャートが作れるようになりました。

チャート

  • エリアチャートやバーチャートにおいて、「積み重ね」と「オーバーレイ」の日本語ラベルがより適切な表現に更新されました。
  • チャートの画像エクスポート失敗時に、フォルダ権限の確認や再試行を行い、状況に応じた適切なエラーを表示するよう改善されました。
  • 無効化した基準線がツールメニュー上で有効なものと区別しにくかったため、視覚的にグレーアウトされるようになりました。

ノート

  • AIノートエディターの実行中に、本文の画面のちらつきを抑えてユーザー体験を向上させました。

ドキュメント

  • 正規表現のヘルプボタンのリンク先が、より適切で最新の解説ノートへと更新されました。

問題の修正

AI プロンプト

  • AIプロンプトの入力フィールドと実行ボタンの表示位置がずれ、他のテキストと重なってしまう不具合がありました。

チャート

  • ピボットテーブルで合計行を表示してCSVエクスポートする際、特定の列で異なるデータ型が混在するとエラーになる問題がありました。
  • ピン留めされたチャートが、無効化された前のステップに依存している場合に、キャッシュ保存やレンダリングでエラーが発生していました。
  • マーカーのショートカットメニュー導入後、マーカーのスタイル設定メニューにアクセスできなくなっていました。
  • 設定していないはずのX軸基準線がチャートに表示されたり、古い設定データが残存して意図しない表示になる不具合がありました。

テーブル・ビュー

  • ピボットテーブルの値にNAが含まれるデータをCSVエクスポートする際、データ型の不一致でエラーになる問題が修正されました。
  • 表計算でCharacter型の列をグループに、POSIXct型の列を値に設定した際、UI上で値フィールドが未選択に見える不具合がありました。

ノート

  • AIノートエディタのダイアログを上に移動した際、下側の境界線が表示されない問題がありました。
  • TOC(目次)が長すぎる場合に、スクロールして残りの項目を表示することができませんでした。

パラメーター

  • Between(範囲)演算子でパラメータを選択した際、ドロップダウンが2つ表示されたりUIが崩れたりする問題がありました。

14.5

2026年3月5日リリース

新機能

アナリティクス

  • 機械学習モデルとしてLightGBMをUIから直接利用できるようになりました。

機能強化

AI プロンプト

  • AIプロンプトで数値計算を指示した際、存在しない関数が使われないよう、適切な数値計算関数を使用するように改善されました。
  • AIプロンプトのダイアログに、結合先のデータフレームを「@」で指定できる旨の説明テキストが追加されました。

AI 関数

  • AI関数のメニューに、テキスト要約やセンチメント分析、翻訳などのよく使われるタスクの例が追加されました。
  • AI関数の処理において、1万行の制限を適用する前に欠損値を除外して有効なデータを優先的に処理できるようになりました。
  • AI関数を実行する際、並列処理がオフで3000行を超える場合に、処理上限に関する確認ダイアログが表示されるようになりました。
  • データフレームを複製した際に、キャッシュされたAI関数のステップが不要に再実行されていた問題が改善されました。

チャート

  • Y軸メニューのマーカー設定にショートカットメニューが追加され、利用可能なタイプを素早く選択できるようになりました。
  • エリアチャートを色で分割した際に、値を積み上げずにY軸の0から開始して可視化できるようになりました。
  • チャートに表示するデータがない場合、エラーを防ぐためにイメージやデータのエクスポートボタンが無効化されるようになりました。
  • チャートの「値を表示」設定において、表示位置のデフォルトが「自動」に設定されました。
  • チャートのテーブルやピボットテーブルのホバーポップアップにおいて、コピー時のフィードバック表示やバルーンサイズの拡大などの改善が行われました。
  • チャートフィルタを実行した後に、フィルタリストのダイアログが自動的に閉じるようになりました。
  • ナンバーチャートにおいて、ダッシュボード配置時の視認性を高めるためにフォントサイズを指定できるようになりました。
  • ナンバーチャートにおいて、接頭辞や接尾辞の文字サイズや色を個別にカスタマイズできるようになりました。
  • バーチャートでロジカル型の割合を表示した際、詳細データにTRUEだけでなくFALSEの行も含まれて表示されるようになりました。
  • バーチャートで値が0の場合でも、チャート上に「0」の数値を表示できるようになりました。
  • ピボットテーブルにおいて、フォントサイズを小さく設定した際に行の高さが自動で縮小されるようになりました。
  • フィルタの「月の日」タイプにおいて、範囲指定ができる「範囲内」演算子がサポートされました。
  • 散布図の軸に日付列を割り当てた際、設定から表示する日付の期間範囲を指定できるようになりました。
  • 表示行数制限がかかっているピボットテーブルでも、エクスポート時には全行のデータを出力できるようになりました。
  • 集計テーブルの「その他」グループ設定において、グループごとに頻度の高い値を残してそれ以外をまとめることができるようになりました。
  • 集計テーブルやピボットテーブルにおいて、列を識別しやすくするための垂直方向の罫線を表示できるようになりました。

アナリティクス

  • アナリティクスビューのメニューに、LightGBMが追加されました。
  • クラスタリングのプロパティから、現在はサポートされていない平行座標プロットに関する設定セクションが削除されました。
  • 因子分析の結果において、因子得点をどのように解釈すべきかの説明ガイドが追加されました。

ダッシュボード

  • ダッシュボード全体の背景色やチャートのボーダーの色を、設定ダイアログから自由に変更できるようになりました。
  • 日本語UIを使用している場合、ダッシュボードのPDF印刷ダイアログも日本語で表示されるようになりました。

ノート

  • ノートの目次(TOC)のスタイルが改善され、より使いやすいデザインが導入されました。
  • 編集モードのチャートにおいて、クリック操作で「行の選択」と「チャート要素の選択」を簡単に切り替えられるようになりました。

データソース

  • CSVインポート時に、読み込む最大行数を指定してインポート時間を短縮できるようになりました。
  • GitHub Issuesデータソースにおいて、日付範囲やステータスなどのパラメータを指定してデータを取得できるようになりました。
  • GitHubのデータソースにおいて、1万件を超える古いイシューを取得するためのフィルタパラメータがサポートされました。
  • データコネクションの選択肢から、古くなったMailChimpの項目が削除されました。
  • データベース接続ジョブにおいて、Rserveの状態が不安定になりSQLクエリがnullを返した場合に自動再起動するようになりました。

テーブル・ビュー

  • テーブルビューのホバーポップアップでコピーボタンをクリックした際、「コピー完了」を示す視覚的なフィードバックが表示されるようになりました。

パラメーター

  • 単一選択パラメータのダイアログにおいて、ラベルの文言変更や入力フィールドの配置調整が行われ、使いやすくなりました。

プロジェクト

  • JS APIで生成されたRスクリプトに対して、テストフレームワーク内でリンターによる検証ができるようになりました。
  • Mac環境で書き込み権限のないフォルダにプロジェクトを作成しようとした際、適切なエラーチェックが行われるようになりました。

その他

  • Intel Mac環境での自動テスト環境構築を自動化するスクリプトとガイドが整備されました。
  • M1 Mac環境の自動テストにおいて、CSV保存時のエンコーディングや改行コードに関するテストの失敗が修正されました。
  • Rserveがクラッシュして接続エラーが発生した際に、自動でRserveを再起動できるようになりました。
  • アプリケーション終了時に、リソースを適切に解放するためのクリーンアップ処理が強化されました。
  • サマリービューのヘルプリンクの日本語化や、フィルタ・基準線ボタンのスタイル改善、GitHub連携のヘルプ更新などが行われました。
  • 肥大化した古いログファイルを自動的に削除し、ストレージ容量を節約する仕組みが導入されました。

問題の修正

AI プロンプト

  • AIプロンプトで時間型(hh:mm:ss)への型変換を指示した際、誤った関数が使われてエラーになる問題が修正されました。
  • AIプロンプトのエディタで複数行のコードを入力すると、テキストが領域外に溢れてカーソル位置が見えなくなる問題が修正されました。
  • AIプロンプトの実行時などに、存在しない「null」関数を呼び出す不正なスクリプトが生成されエラーが発生する問題が修正されました。

AI 関数

  • AI関数のリクエスト実行中に、ネットワークエラーやサーバーからのデータ受信失敗により処理が中断される問題が修正されました。

データソース

  • Excelインポートダイアログで最初のシートが空の場合、テーブルビューの横スクロールができなくなる問題が修正されました。
  • GitHubのデータインポートで全列の選択を解除した後に数列だけ選び直しても、不要な列までインポートされる問題が修正されました。
  • Googleスプレッドシートのインポート時に、ダイアログで指定したデータ型の変換が正しく反映されない問題が修正されました。
  • JSONインポート時に「データタイプを自動認識」のチェックを外していても、自動的に型変換が行われる問題が修正されました。
  • Rスクリプトのインポートダイアログにおいて、一度表示したプレビューデータが保持されない問題が修正されました。
  • インポートダイアログで「yyyy/m/d」形式の文字列を日付型に変換しようとすると、欠損値になる問題が修正されました。
  • クラウドストレージからCSVをインポートする際、プレビューの列制限を高く設定しても100列までしか表示されない問題が修正されました。
  • ファイルのインポート・マージ機能において、検索条件に濁点や半濁点を含む文字列を指定すると正しくファイルを抽出できない問題が修正されました。
  • リモートCSVのデータソースを変更した際、ファイルパスやプレビュー内容が新しいファイルの情報に更新されない問題が修正されました。

データ加工

  • AIデータ加工の指示に全角の括弧記号を含めると、生成されるRスクリプトで半角に変換されてしまい正しく処理されない問題が修正されました。
  • Shiftキーを押しながらステップのトークン部分をクリックして複数選択しようとしても、単一選択になる問題が修正されました。
  • 外れ値の除外機能が正しく動作しない問題が修正されました。

チャート

  • 「値を表示」のポジションを「自動」にした際、欠損値(NA)を持つデータのラベルが不適切な場所に表示される問題が修正されました。
  • 1つの指標のみを持つピボットテーブルで総計を表示しようとすると、Rのエラーが発生して描画に失敗する問題が修正されました。
  • X軸に「表示する値の制限」を適用すると、色に割り当てた列のFactorレベルが消えてしまい、色の割り当てが変わる問題が修正されました。
  • Y軸マーカーのサブメニューとカラム選択リストの表示位置が、メインメニューの上端と合うように修正されました。
  • エリアチャートで繰り返し(リピート)を使用しX軸の同期を外した際、X軸の日付スケールの開始位置がずれて表示される問題が修正されました。
  • チャートのフィルタや基準線の設定を無効化していても、プレビュー画面の条件一覧に表示され続ける問題が修正されました。
  • テーブルチャートの保存処理に時間がかかり、別のタブへの切り替えに待たされる問題が修正されました。
  • ノートに挿入した地図チャートをイメージとしてエクスポートしようとすると、データが空であるというエラーで失敗する問題が修正されました。
  • バーチャートのX軸に基準線を設定した際、Y軸に複数の値を選択しているとラベルが重複して表示される問題が修正されました。
  • バーチャートやヒストグラムなどで、信頼区間と重なってしまう不要な矢印を非表示にできるようになりました。
  • ピボットテーブルで列の並び順を降順に変更した際、合計行の値がソート後の列に対応せず、不一致が生じる問題が修正されました。
  • ピボットテーブルの描画時に、指標の定義が不正な場合に数値判定処理でエラーが発生する問題が修正されました。
  • ピボットテーブルをExcelやクリップボードへエクスポートした際、合計や小計が含まれていない問題が修正されました。
  • 円グラフを「繰り返す」で分割した際に、各グラフのタイトルが表示されない問題が修正されました。
  • 散布図でY軸ラベルの小数の桁数を0に設定すると、詳細データを表示する際のフィルタ条件から小数点が落ちてデータが表示されない問題が修正されました。
  • 散布図のY軸で小数の桁数を設定していると、データポイントをクリックしても詳細データが表示されない問題が修正されました。
  • 集計テーブルをCSVエクスポートした際、グループ化された列の値が2行目以降欠損値になる問題が修正されました。

アナリティクス

  • 相関分析のアナリティクスビューにおいて、「テーブルを表示」をクリックしても読み込みが終わらずテーブルが表示されない問題が修正されました。

ダッシュボード

  • ブラウザからダッシュボードをPDFとして出力する際に、チャートが正しくエクスポートされない問題が修正されました。
  • 特定のRコードを使用したサンキーチャートで、プレビューやパブリッシュ時に中身が空になる問題が修正されました。

ノート

  • 2列レイアウト内に配置した数値チャートが、プレビューやパブリッシュ後の画面で下部が欠けてスクロールバーが表示される問題が修正されました。
  • Rスクリプトブロックを実行した際、エラーが発生しているにもかかわらず何も表示されない問題が修正されました。
  • ノートの2列レイアウトで特定の操作を行うと、右側のチャート領域が消えたりノートが白紙になったりする問題が修正されました。
  • ノートのRコードブロックで特定のパッケージを使用して図を描画しようとすると、プロセスが競合してエラーが発生する問題が修正されました。
  • ノートを開いた際に、データが存在するはずのチャートが「表示するデータがありません」と誤って表示される問題が修正されました。
  • ノート内のRコードブロックのプレビュータブにおいて、表示されているテキストを選択できない問題が修正されました。
  • ノート内の検索ボックスで文字を入力すると、すぐにフォーカスが外れて検索ができなくなる問題が修正されました。
  • 指標付きの数値チャートを含むノートをWordへエクスポートした際、メインの値が誤った内容で表示される問題が修正されました。
  • 数値チャートを含むノートをWordファイルにエクスポートしようとすると、型変換のエラーで失敗する問題が修正されました。
  • 特定のノートを開こうとすると、エディター画面が真っ白になり操作不能になる問題が修正されました。
  • 特定のマークダウンテキストをノートエディタに貼り付けた際、書式が正しく反映されず構文が無視される問題が修正されました。
  • 絶対パスで画像を参照しているマークダウンをノートに貼り付けた際、画像が表示されない問題が修正されました。

テーブル・ビュー

  • Windows環境のテーブルビューで一番下までスクロールした後にマウスホイールを操作すると、表示が急に一番上に戻る問題が修正されました。
  • テーブルのスクロールバーを最下部までドラッグした後にマウスホイールで上へスクロールすると、位置がリセットされる問題が修正されました。
  • テーブルのポップアップにおいて、テキストが長い場合に表示が切れたり枠外にはみ出したりする問題が修正されました。

パブリッシュ

  • BigQuery OAuth接続を含むプロジェクトを別PCに移行してパブリッシュしようとすると、コネクションエラーが発生する問題が修正されました。
  • PDFエクスポート時に、数値チャートのサブ指標の書式崩れやピボットテーブルの色設定の欠落、地図の非表示が発生する問題が修正されました。
  • SQLインポートやパブリッシュのジョブをキャンセルする際、ステータス確認を待たずに一律1分間待機する仕様が改善されました。
  • ダッシュボードのパブリッシュなどの処理をキャンセルした際、完了までに非常に長い時間がかかる問題が修正されました。
  • ピボットテーブルをExcelエクスポートした際、特定の文字や多言語データが原因でファイル破損エラーが発生する問題が修正されました。

パラメーター

  • セッションパラメータに依存する動的なパラメータにおいて、実行や再起動をしないと適切な値が代入されない問題が修正されました。
  • パラメータで今日以降の日付を指定して実行すると、処理が終わらない問題が修正されました。
  • 日付を参照するパラメータにおいて、デフォルト値の更新やリセットが正しく反映されない問題が修正されました。

プロジェクト

  • データフレームのメニューを開いた際、データフレーム名にマウスオーバーするとポップアップが重なってメニュー操作を妨げる問題が修正されました。
  • バージョンアップ後にプロジェクトを開くと、カスタムパッケージが削除されていないのに警告が表示される問題が修正されました。
  • 履歴から状態を復元しようとした際、Gitのロックファイルが残っているとエラーで失敗する問題が修正されました。

その他

  • Intercomのチャットダイアログにおいて、セキュリティ設定で許可されているにもかかわらずログファイルを添付できない問題が修正されました。
  • Windows環境の自動テストにおいて、ファイルパスの扱いに起因するテストの失敗が修正されました。
  • オフラインモードに設定してアプリケーションを終了しても、再起動時に設定が保持されずオンラインモードで起動する問題が修正されました。

14.4

2026年01月18日リリース

機能強化

  • AI: AI関数: AI関数 の結果と実際の行数が一致しない場合の安定性を向上しました。
  • AI: AI関数: 列名に日本語や数字が含まれている場合の処理を改善しました。
  • アナリティクス: ランダムフォレストおよび XGBoost において、実行エラーを防ぐために無限大(inf)の値を自動的に除外するようになりました。
  • データソース: インポート&マージ: 対象のファイルを指定する際に「…を含まない」、「…で始まらない」、「…で終わらない」の条件をサポートしました。
  • データラングリング: フィルタ: 欠損値を保持するオプションをサポートしました。
  • データラングリング: ロングから: ロングからワイド を使ったワンホットエンコーディングをサポートしました。
  • チャート: 実際のデータ範囲に関わらず、繰り返し年チャートで X 軸の範囲(例: 1/1〜12/31)を一定に保つオプションをサポートしました。
  • チャート: 基準線で小数点以下の桁数を指定できるようになりました。
  • チャート: フィルター: ドラッグ&ドロップでフィルタ条件の並び替えができるようになりました。
  • チャート: チャートのプロパティ・ダイアログがドラッグで動かせるようになりました。
  • チャート: マップ: ラベルとして選択できる列数を増やしました。
  • チャート: 値の表示において、文字が重ならないよう自動的に位置を調整するようになりました。
  • チャート: リファレンスラインの「プロット領域にテキストを表示」で、文字が重ならないようにしました。
  • チャート: エラーバー: チャート要素と値が重ならないようにするオプションを追加しました。
  • ダッシュボード: 複数ページのダッシュボードを PDF にエクスポートできるようになりました。
  • ノート: ノートの PDF エクスポートをサポートしました。

修正された問題

  • データラングリング: ロングからワイド: 値に空文字列が含まれている場合、ワイド型への変換時にエラーが発生する問題を修正しました。
  • データラングリング: TF-IDF: TF-IDF 計算時に document_id が正しくならない問題を修正しました。
  • チャート: 表計算: 「欠損値を除外」が有効な場合に、他の列の値まで削除されてしまう問題を修正しました。
  • チャート: バーチャート: 繰り返しと累積パーセンテージを使用した場合に、Y2 軸が 100% を超えてしまう問題を修正しました。
  • チャート: ピボットテーブル: v14 以降で発生していたパフォーマンス低下を修正しました。
  • チャート: レーダーチャート: 色で分類している場合に、「チャートと同じ色」を選択すると色が反転する問題を修正しました。
  • アナリティクス: 単語のカウント: 「組み合わせをカウント」のデフォルト値を「ドキュメント内」に変更しました。
  • アナリティクス: ARIMA: 「subscript out of bounds」エラーが発生する問題を修正しました。
  • アナリティクス: ARIMA: 「Null model was selected」エラーが発生する問題を修正しました。
  • ダッシュボード: 設定したパラメーターが表示されない問題を修正しました。
  • ダッシュボード: URL で指定したパラメーター値がダッシュボード結果に反映されない問題を修正しました。
  • ダッシュボード: Exploratory サーバー上ですでにパラメーターを実行したことがある場合に、URL で指定したパラメーター値が反映されない問題を修正しました。
  • ノート: ノートを PDF にエクスポートした際に、チャートや画像がページ区切りで分割されてしまう問題を修正しました。
  • 一般: ウィンドウを最大化状態から復元した際に、矢印アイコンの向きが正しく表示されない問題を修正しました。

14.3

2025年12月22日リリース

機能強化

  • チャート: ピボット / 集計テーブル: テーブルを画像ファイルとしてエクスポートできるようになりました。
  • ノート: チャートおよびアナリティクスで、正方形サイズを設定できるようになりました。

修正された問題

  • 一般: Windowsアップデート後に、ExploratoryがWindows環境で起動しなくなる問題を修正しました。
  • チャート: 散布図: データが部分的に重なっている場合に、2番目のY軸の列に対するトレンドラインの位置が正しく表示されない問題を修正しました。

14.2

2025年12月14日リリース

機能強化

  • チャート: リファレンスライン: リファレンスラインのボックスをドラッグ&ドロップで並び替えられるようになりました。
  • チャート: リファレンスライン: mean 以外の Roll 関数をサポートしました。
  • ダッシュボード: テキストパネル: パラメーターを使って、URL ベースで画像を動的に表示できるようになりました。
  • ダッシュボード: ダッシュボード上のチャートタイトルで太字フォントをサポートしました。

修正された問題

  • データソース: Google Cloud Storage: バケット内に多数のファイルがある場合に、UI 上で http_400 エラーが発生して一覧表示できず、ファイルをインポートできない問題を修正しました。
  • チャート: 特定の条件下で、チャートの並び順が変わってしまう問題を修正しました。
  • チャート: 折れ線: ホバーモードで同じ X 軸上にすべての値を表示している際、欠損値があると次の値が正しく表示されない問題を修正しました。
  • プロジェクト: コラボレーション: プロジェクトを閉じずにアプリを終了した場合、編集中を示す緑色のランプが点灯したままになる問題を修正しました。
  • プロジェクト: Exploratory 14.1 へアップグレード後に、“invalid multibyte character in parser (C:\Program Files\Exploratory\lib\library.r:4591:61” というエラーが発生して、プロジェクトを開けない問題を修正しました。

14.1

2025年12月7日リリース

機能強化

  • アナリティクス: 「単語のカウント」アナリティクスで、単語化済みのデータを使用できるようになりました。

修正された問題

  • AI: AI 関数: 改行を含むデータを実行するとエラーが発生する問題を修正しました。
  • AI: AI サマリ がアカデミックプランで月の利用量の上限に達した場合に動作しない問題を修正しました。
  • AI: Ask AI のスピンアイコンが回り続ける問題を修正しました。
  • チャート: バー: 基準線: 複数の列をY軸に割当、繰り返しを利用し、「Y軸を同期」をオフにした場合、、X軸の基準線が上まで引かれない問題を修正しました。
  • チャート: 基準線ボタンの名称を変更しました。
  • チャート: AI 関数の処理完了後に自動で再描画されない問題を修正しました。

14.0

2025年11月23日リリース

新機能

  • AI関数: 生成AIを使ってデータを分析、加工するための関数を作ることができるようになりました。
  • ノート: チャートやコメントを元に、分析レポートを自動生成する「AIノートエディター」機能が追加されました。
これらの新機能の詳細については、こちらのアナウンスメント記事で紹介しています。

機能強化

  • データソース: Google Sheets: インポート時に列のデータ型を上書きできるようになりました。
  • データラングリング: テーブルのホバーポップアップのテキストをコピーできるようになりました。
  • チャート: テーブル / ピボットテーブル のホバーポップアップでテキストをコピーできるようになりました。
  • チャート: 「8/1」のように十の位にゼロが付かない日付フォーマットがサポートされました。
  • チャート: フィルターおよび基準線用にボタンスタイルのメニューが追加されました。
  • チャート: ナンバー: 差 / 比率のサブ指標の表示名を変更できるようになりました。
  • チャート: ナンバー: サブ指標のテキストカラーを変更/反転できるようになりました。
  • チャート: ピボットテーブル / 集計テーブル: 合計・小計へのウィンドウ計算がサポートされました。
  • チャート: ピボット: 詳細データ表示で、「TRUEの数」選択時に TRUE の行のみを表示できるようになりました。
  • チャート: 基準線: 累積合計値 / 累積合計値の割合 (%) において、すべてのチャートタイプで Y2 軸が利用できるようになりました。
  • チャート: 基準線: 累積合計値 / 累積合計値の割合 (%) および移動平均でグループ化オプションがサポートされました。
  • ダッシュボード: フィルター選択を解除しても地図のズームレベルが維持されるようになりました。

修正された問題

  • データソース: データベース: ウィンドウを最大化すると、編集中の SQL が消えてしまうという問題を修正しました。
  • データソース: インポートボタンをクリックした後、ファイル選択ボタンが表示されないという問題を修正しました。
  • データソース: Google Analytics: “Cannot read properties of undefined (reading ‘some’)” のエラーが発生するという問題を修正しました。
  • データソース: インポート: SQLクエリのキャンセル後、インポートダイアログの「キャンセル」ボタンが反応しないという問題を修正しました。
  • データラングリング: 条件を元に値を置き換える: 既存の条件設定が「作成中…」と表示されてしまう問題を修正しました。
  • データラングリング: フィルター: 「この文字で始まる」内の「複数の値を指定」が機能しないという問題を修正しました。
  • データラングリング: データ再インポートダイアログが前回の選択を記憶していないという問題を修正しました。
  • データラングリング: データフレームを削除しても残ることがあるという問題を修正しました。
  • データラングリング: 再インポートダイアログで、ブランチのブランチに参照されるデータフレームが一覧に表示されないという問題を修正しました。
  • データラングリング: 「この文字で始まる」において複数値を指定した場合、条件式が空になってしまうという問題を修正しました。
  • データラングリング: EDF ファイルをインポートした際に、不要な「imp」接尾文字が付くという問題を修正しました。
  • チャート: チャートが必ずピン留めされるように修正しました。
  • チャート: ピボットテーブル: 集計テーブル: 「割合(% of)」の表計算適用時に追加の合計が正しく機能しないという問題を修正しました。
  • チャート: ピボットテーブル: カスタム計算値が誤ったカラーパレットを使用してしまうという問題を修正しました。
  • チャート: ピボットテーブル: 「表示する値の制限」を使用時にエラーが発生するという問題を修正しました。
  • チャート: ピボットテーブル: 値が切り捨てられた場合、ポップアップが不安定になるという問題を修正しました。
  • チャート: ピボットテーブル: 複数の列を値に選択時、最後の値に対する「小計のみ表示」「合計のみ表示」が機能しないという問題を修正しました。
  • チャート: 基準線: 累積合計 / 累積比率および移動平均の計算が散布図(集計あり、集計なし)で正しくないという問題を修正しました。
  • チャート: 基準線: 2本目のラインのラベルが「凡例に表示」をオンにしても表示されないという問題を修正しました。
  • チャート: 基準線: 論理型のデータタイプの列の時に Y軸のスケールが正しくないという問題を修正しました。
  • チャート: 基準線: 累積合計値の割合の基準線の設定時に、Y2軸タイトルとラベルが重なりラベルが切れてしまうという問題を修正しました。
  • チャート: 散布図: X軸に日付列を割り当てた場合、基準線が表示されないという問題を修正しました。
  • チャート: 散布図: Y軸をパーセント形式にすると詳細データが表示されないという問題を修正しました。
  • チャート: 箱ひげ図: X軸と色に同じ列を割り当てた際、ソートが機能しないという問題を修正しました。
  • チャート: テーブル: ピボットテーブル: 集計テーブル: カスタム計算を使った場合、ユーザーパレットを選択しても常にグレーのパレットになるという問題を修正しました。
  • アナリティクス: ガイド付きアナリティクスで、P値の小数表示桁数が正しく変更されないという問題を修正しました。
  • アナリティクス: 決定木: 目的変数に論理値型の列を割り当てたとき、ノードの値が 0.5 の背景が中間色であるグレーにならない問題を修正しました。
  • アナリティクス: アナリティクスビューでパラメーター変更後に処理が終了せず、処理中の表示が消えないという問題を修正しました。
  • アナリティクス: Mac上で、決定木で日本語を含む値の列を選択すると凡例が文字化けするという問題を修正しました。
  • アナリティクス: 教師あり学習モデル: 予測変数として日付列を使用すると、日の値が誤ってカテゴリとして扱われるという問題を修正しました。
  • アナリティクス: t検定: 等分散を仮定するメニュー名を変更しました。
  • アナリティクス: t検定(集計データ): データ分布タブの読み込みが完了しないという問題を修正しました。
  • アナリティクス: 単語のカウント: 共起ネットワークのチャートの設定を変更すると、別のデータフレームの結果が表示されるという問題を修正しました。
  • ノート: フルサイズ画像の表示位置が正しくないという問題を修正しました。
  • ノート: EDFを重複したデータフレームを含むプロジェクトにインポートすると、重複したデータフレームに紐づくチャートがインポートされないという問題を修正しました。
  • ノート: EDFファイルのインポートすると、インポートされたノートの名前に不要な「_1」が追加されるという問題を修正しました。
  • ダッシュボード: 「全ページに適用」をオフにしても、パラメーター更新時にページ全体がリフレッシュされるという問題を修正しました。
  • ダッシュボード: 実行せずにパブリッシュした場合、サムネイルが現在のページではなく前回実行時の最終ページを表示するという問題を修正しました。
  • ダッシュボード: ダッシュボードを複製して実行せずにパブリッシュすると、1ページ目の最初のチャートがサムネイルになってしまうという問題を修正しました。
  • ダッシュボード: サーバー: パラメーター: 複数のワードクラウドに対してそれぞれ別個にパラメータを割り当て、全てで同じ値を指定した場合に、ワードクラウドの出力結果が異なる問題を修正しました。
  • パブリッシュ: 2GBを超えるサイズのデータのパブリッシュ時に “paste(csv_content…) result would exceed 2^31-1 bytes” というエラーが発生するという問題を修正しました。
  • プロジェクト: 無効なデータフレームのメタデータを含むプロジェクトを複製するとエラーが発生するという問題を修正しました。
  • プロジェクト: プロジェクトウィンドウが1回のクリックで閉じないという問題を修正しました。

13.10

2025年10月15日リリース

修正された問題

  • データラングリング: 「データをすべて再インポート」が、他のデータフレームを選択した場合に機能しない問題を修正しました。

13.9

2025年10月14日リリース

修正された問題

  • AI: 「NPSを計算して」というテキストをAI プロンプトに入力した場合、結果が返されない問題を修正しました。
  • データソース: Oracle: データソースとしてOracleを選択した際に、画面が空白で表示される問題を修正しました。
  • データラングリング: マージされたデータファイルから作成されたデータフレームを削除したときに、「startsWith is not a function」というエラーが発生する問題を修正しました。

13.8

2025年8月15日リリース

修正された問題

  • チャート: ピボット: 「値のフォーマットの設定」ダイアログで、色を選択するドロップダウンメニューが見切れる問題を修正しました。

13.7

2025年8月14日リリース

機能強化

  • チャート: ピボット/集計テーブル: デフォルトの合計の集計関数を上書きできるようになりました。
  • チャート: ピボット/集計テーブル: 列レベルごとの合計を表示するかどうかを設定できるようになりました。
  • ダッシュボード: チャートの描画パフォーマンスを改善しました。チャートのクエリがチャートの描画をブロックしないようになりました。

修正された問題

  • データソース: Windows環境で、Rスクリプトデータソースのインポートをキャンセルした後に閉じるボタンが反応しない問題を修正しました。
  • データラングリング: 「データをすべて再インポート」が、対象がブランチやブランチのブランチである場合に機能しない問題を修正しました。
  • データラングリング: AI プロンプト: データフレームにグループ化の列があり、多くのグループを含む場合にAI プロンプトがエラーで終了する問題を修正しました。
  • データラングリング: フィルタ: 「今日からNか月前の最終日」を指定した際にエラーが発生する問題を修正しました。
  • データラングリング: 「Nか月前の初日/最終日」オプションのテキスト/ラベルをわかりやすくしました。
  • チャート: バー: Y2軸のスケールの範囲を設定すると、Y1軸とY2軸のスケールが0で同期しない問題を修正しました。
  • チャート: ヒートマップ: 同じチャートで以前にカスタムで色を選択していた場合、値が0のときのカラーパレットの色が正しく適用されない問題を修正しました。
  • チャート: ライン: 同じチャートで以前に色の設定のダイアログで方向に「下から上」を選択していた場合、凡例の色が設定と反転して表示さる問題を修正しました。
  • チャート: 「ライン+サークル」マーカーを使用し、チャートをクリックして詳細を表示した場合、サークルが消える問題を修正しました。
  • アナリティクス: 時系列クラスタリングで、実行時に “model = purrr::map(…)” というエラーが発生する問題を修正しました。
  • ダッシュボード: 別のプロジェクトからダッシュボードをコピーすると、コピーしたダッシュボードの名前に「_1」が追加されてしまう問題を修正しました。
  • ダッシュボード: 新規ダッシュボードの作成直後にレイアウトを「列」へ切り替えると、画面が空白になる問題を修正しました。

13.6

2025年7月29日リリース

修正された問題

  • アナリティクス: Prophet/ARIMA: プロパティダイアログで「適用」ボタンをクリックしても反応しない問題を修正しました。

13.5

2025年7月28日リリース

機能強化

  • データソース: 複数のデータフレームを結合したデータを再インポートする際に、選択したデータソースのみ再インポートできるようになりました。
  • データソース: ‘.xlsm’ タイプのエクセルファイルもドラッグ&ドロップでインポートできるようになりました。
  • データラングリング: フィルター: Nヶ月前の最初の日と最後の日でフィルターできるようになりました。
  • チャート: カスタム計算でパラメーターを使用できるようになりました。
  • チャート: 集計テーブルとピボットテーブルからデータをエクスポートする際に、合計値を含めるようになりました。
  • ノート: ノートエディターに保存ボタンを追加しました。
  • ノート/ダッシュボード: チャートデータをCSVにエクスポートする際に利用される改行コードを「システム設定」のダイアログから設定できるようになりました。
  • セキュリティ: 2FA/MFA認証をサポートしました。

修正された問題

  • データソース: S3: データをインポートする際に「Error in z[["Owner"]][["ID"]] : subscript out of bounds」エラーが発生する問題を修正しました。
  • データソース: MongoDB: スケジュールされたデータが更新された後、列のデータ型がデスクトップと異なる問題を修正しました。
  • データラングリング: サマリ・ビュー/テーブル・ビュー: 行フィルターで日付で”どれかに等しい(複数の値)“を選択した際に、入力したテキストをクリアできない問題を修正しました。
  • チャート: パラメーターから特定の日付に切り替えた後、日付範囲パラメーターが機能しない問題を修正しました。
  • アナリティクス: 線形回帰: 説明変数のデータ型を日付から数値に変更した際にextract_from_date関数エラーで失敗する問題を修正しました。
  • アナリティクス: 単語のカウント: AIサマリに表示される例のテキストが英語のとき、重複している、または表示されない問題を修正しました。
  • アナリティクス: 単語のカウント: ダウンロードしたチャート画像が間違ったチャートを表示する問題を修正しました。
  • ノート: 特定の条件下で色付きテキストが自動的にハイパーリンクとして認識される問題を修正しました。
  • ダッシュボード: チャートデータをCSVにエクスポートする際に「Error in gsub(“EXP__NA”, """", csv_content) : input string 1 is invalid」エラーが表示される問題を修正しました。
  • ダッシュボード: パラメーター: 「選択した値を保存」がチェックされていない場合、パブリッシュ先のブラウザでエラーが発生する問題を修正しました。
  • パブリッシュ: ストレージの容量超過エラーでダッシュボードのパブリッシュが失敗した際に、ストレージ容量の制限が正常に戻っても元のURLが保持されない問題を修正しました。

13.4

2025年7月8日リリース

機能強化

  • パラメーター: 日付パラメーターのデフォルト値として、直近Nヶ月/週/日と過去Nヶ月/週/日のオプションをサポートしました。
  • パラメーター: 日付パラメーターのデフォルト値として、今月の開始日と終了日を追加しました。

修正された問題

  • チャート: マップ: イギリスの国別地図で一部の地域が表示されない問題を修正しました。
  • チャート: マップ: バチカン市国やアンティグア・バーブーダなど、いくつかの国が世界地図で欠落していた問題を修正しました。
  • チャート: マップ: 世界地図(太平洋中心)において経度の範囲が広すぎた問題を修正しました。
  • プロジェクト: プロジェクトが “Error in loadNamespace(x) : there is no package” というエラーで開かない問題を修正しました。

13.3

2025年7月5日リリース

機能強化

  • データソース: Google Sheets: CSVファイルと同様に、インポート時のデータ型自動検出をサポートしました。
  • チャート: ナンバー: 値の後ろに任意のテキストを追加できるようになりました。
  • ノート: Markdown形式でのエクスポートをサポートしました。

修正された問題

  • AI: プロンプト: 既存のAI プロンプトステップを再度開いた際に、Rスクリプトが正しく復元されない問題を修正しました。
  • データソース: BigQuery: コネクション設定ダイアログでタイトルとテキストが重なって表示される問題を修正しました。
  • データラングリング: EDFのエクスポート: 参照しているコネクションが間違っている、または見つからない場合のエラーハンドリングを改善しました。
  • サマリ・ビュー/テーブル・ビュー: 列が1000列を超える場合に、すべての列を正しく表示できない問題を修正しました。
  • チャート: パブリッシュされたチャートからCSV形式でデータをダウンロードできない問題を修正しました。
  • アナリティクス: 生存曲線のチャートで、信頼区間を表示するとX軸の左側に余白ができる問題を解消しました。
  • ノート: 以前のバージョンのExploratory デスクトップで作成したノートを開くと空白ウィンドウが表示される問題を修正しました。
  • ダッシュボード: ダッシュボードのサムネイルにポップアップが残る問題を修正しました。
  • 一般: プロジェクトリスト・ビューのユーザーのドロップダウンに、ホステッド/オンプレミスサーバー接続時にクオータ情報が表示される問題を修正しました。
  • 一般: Windows でプロジェクトウィンドウをリサイズまたは最大化すると空白になる問題を修正しました。

13.2

2025年6月28日リリース

機能強化

  • データソース: Google BigQuery: OAuthに加えて、サービスアカウントを使ってデータを取得できるようになりました。
  • アナリティクス: AIサマリー: 「テキストをコピー」ボタンを使ってAIサマリーの内容をコピーできるようになりました。

修正された問題

  • データソース: Googleアナリティクス: 古いバージョン3のGAデータソースを再インポートするときに、ユーザーフレンドリーなメッセージを表示するようにしました。
  • データラングリング: EDFファイル以外を選択したときに、ユーザーフレンドリーなメッセージを表示するようにしました。
  • チャート: パイチャート: カスタムで選択した色に不透明度を設定しても、その設定が反映されない問題を修正しました。
  • アナリティクス: ウィンドウを切り替えると、アナリティクスガイドのスクロール位置が先頭に戻ってしまう問題を修正しました。
  • アナリティクス: 統計モデル: Repeat byを使用したとき、完全な多重共線性のあるグループが多重共線性チャートに表示されない問題を修正しました。
  • アナリティクス: 単語のカウント: パブリッシュされた単語のカウントのアナリティクスで、共起ネットワークチャートが表示されない問題を修正しました。
  • ノート: Rスクリプト: ggplot2を使ったチャートのズームレベルが、ブラウザ上でのプレビューとデスクトップ上でのプレビューで異なる問題を修正しました。
  • ダッシュボード: ダッシュボードの実行時に「Dashboardの生成中にパラメーターの更新に失敗しました」というエラーが発生する問題を修正しました。
  • ダッシュボード: 多数のチャートを含むダッシュボードで、実行ボタンをクリックしたりパラメーターを変更したときに非常に時間がかかる問題を修正しました。
  • パラメーター: パラメーターの設定ダイアログで、データフレームから値を取得するパラメーターのチェックボックスのラベル「キャッシュされた値」を「値を動的に取得」に変更し、デフォルトをオフに設定することで、より分かりやすくしました。
  • プロジェクト: 履歴: 履歴から復元する際に「認識できない入力で復元に失敗しました」というエラーが発生する問題を修正しました。

13.1

2025年6月12日リリース

機能強化

アナリティクス: 単語のカウント: 元データにグループの割り当て情報と、そのグループの代表的な単語を表示する新しい「データ」チャートテーブルがサポートされました。

修正された問題

サマリビュー: ステップのエクスポートメニューのスタイルが崩れていた問題を修正しました。 アナリティクス: 単語のカウント: ネットワークチャート関連の設定をアナリティクスレベルに移動し、設定の一貫性を保つようにしました。 アナリティクス: 単語のカウント: AIサマリの結果とネットワークチャートで表示されるグループが一致しない問題を修正しました。 パラメーター: 数値のテキスト入力パラメーターで値を空にした場合に、自動的に0が入力されてしまう問題を修正しました。 履歴: マウスホイールでスクロール操作を行うと、予期しない動作でスクロールされてしまう問題を修正しました。

13.0

2025年6月11日リリース

機能強化

  • チャート: テーブル: 色の設定において、「全ての列に適用」オプションがサポートされました。
  • アナリティクス: ユーザーインターフェースが強化され、ナビゲーションとデザインが改善されました。
  • アナリティクス: チャート: アナリティクスおよびチャートのタブ領域にある「チャート/アナリティクスの一覧を表示」ボタンから、利用可能なチャートやアナリティクスの一覧を確認できるようになりました。

修正された問題

  • AI: プロンプト: Cmd + Lショートカットで開いた場合、「ステップとして保存」ボタンをクリックしてもステップが作成されない問題を修正しました。
  • AI: プロンプト: サンプルデータの列数が多い場合に失敗する問題を修正しました。
  • AI: プロンプト: 列でグループ化されている場合、「AIデータ加工」ボタンのスタイルが正しく表示されない問題を修正しました。
  • データソース: CSV / テキスト入力: 区切り文字のフォールバックがR関数レベルでサポートされるようになり、スケジューラー上でも動作するようになりました。
  • データソース: CSVインポート: ファイルに1列しか含まれていない場合に、区切り文字の自動検出が機能しない問題を修正しました。
  • データラングリング: データの加工のステップから発生したエラーである場合に、エラーダイアログが表示されないようになりました。
  • チャート: データフレームを削除した際に、「Cannot read properties of null (reading ‘getRName’)」というエラーが表示される問題を修正しました。
  • チャート: Rベースのチャートが、表示領域に応じて自動的にレイアウトを調整するようになりました。
  • アナリティクス: アナリティクスの種類が、アナリティクスのホバーポップアップに表示されるようになりました。
  • アナリティクス: 「予測変数」の名称が「説明変数」に変更され、表記が統一されました。
  • アナリティクス: GLMアナリティクスにおいて、テストモードが有効になっている場合に、「データタイプ」列が表示されない問題を修正しました。
  • アナリティクス: 統計的に有意でないデータ行が、統計予測モデルの係数テーブルでグレー表示されるようになりました。
  • アナリティクス: One-Way ANOVA分析で、内部的にoneway.test() 関数が使用されるようになりました。
  • ノート / ダッシュボード: 特定のケースで、“EPERM: Operation Not Permitted” エラーによりパブリッシュが失敗する問題を修正しました。
  • ノート: ノートの内容が予期せず以前の状態に戻ってしまう問題を修正しました。
  • パラメーター: スライダー型のパラメーターをデフォルト値で実行した際に、正しい結果が返らない問題を修正しました。
  • パラメーター: パラメーターをデフォルト値にリセットした後、数値スライダーの値が最大値にジャンプしてしまう問題を修正しました。
  • パブリッシュ: ステップ内に多数のcase-when条件がある場合、ノートまたはダッシュボードのパブリッシュがネットワークエラーで失敗する問題を修正しました。
  • システム設定: 日本語UIにおける「レポジトリ」の表記の不整合を修正しました。
  • 一般: プロジェクト一覧ページのユーザー情報のドロップダウンを開くときに、サーバ側の利用状況が更新されない問題を修正しました。
  • 一般: プロジェクト一覧ページのユーザー情報のドロップダウンに、次回の使用量のリセット日が表示されるようになりました。

12.3

2025年4月28日リリース

機能強化

  • AI プロンプト: Rコードブロックで「プレビュー」ボタンをクリックして、生成されたRスクリプトの出力をプレビューできるようになりました。
  • AI プロンプト: Rスクリプトの一部を選択して部分的にプレビューを実行することができるようになりました。
  • AI プロンプト: 生成されたRスクリプトがエラーを出力した場合、プレビューエリアで「自動修正」ボタンをクリックし、問題を自動的に修正できるようになりました。
  • AI プロンプト: 入力内容に一致する過去のプロンプト履歴を表示できるようになりました。
  • AI プロンプト: データフレーム名の提案で、”$“記号に加えて”@“記号も使用できるようになりました。
  • データラングリング: エクスポート: CSVエクスポート時に、エンコーディング(BOM付き)や改行コード(LF/CRLF)を選択できるオプションが追加されました。
  • チャート: ピボットテーブル: 列のプロパティから、列のテキストの配置をコントロールできるようになりました。
  • チャート: ピボットテーブル: チャートのプロパティから、列のカテゴリ間に縦の線を表示できるようになりました。
  • ダッシュボード: 「別のチャートを選択」ボタンから、既存のチャートを別のチャートに差し替えれるようになりました。

修正された問題

  • AI プロンプト: Exploratory サーバーでメールアドレスを変更した後、Exploratory デスクトップ上でAI プロンプトが動作しない問題を修正しました。
  • AI プロンプト: パッケージがデフォルトでロードされていない場合でも、関数名にパッケージ名のNamespaceを入れることで実行できるようになりました。
  • AI プロンプト: サーバーが応答しない場合(例: 529 Overloaded Error)に対するエラーハンドリングを改善しました。
  • Ask AI: デスクトップアプリでエラーの解決を尋ねるときに外部ブラウザではなくデスクトップ上のチャットクライアントを開くようになりました。
  • データラングリング: Google Sheetsへのエクスポート時に先頭のゼロが失われる問題を修正しました。
  • チャート: 箱ひげ図: X軸の「使用されていないレベルを表示」設定が正しく機能しない問題を修正しました。
  • アナリティクス: 対応ありt検定の結果の値がRで生成される値とマッチしないという問題を修正しました。
  • ダッシュボード: テキストエディタでLaTeXのフォーマットが機能しない問題を修正しました。
  • ダッシュボード: Windows環境で「EPERM: Operation Not Permitted, Open」エラーによりパブリッシュに失敗する問題を修正しました。
  • ノート: 同じノート内で数式ブロック、Rブロック、画像を繰り返しコピー&ペーストすると、Enterキーを押した際に不安定になる問題を修正しました。
  • 一般: Mac: 別スクリーンに切り替えた際に全画面モードが解除される問題を修正しました。
  • 一般: プロジェクトを開いたときに’purrr’パッケージがデフォルトでロードされるようになりました。

12.2

2025年4月9日リリース。

機能強化

  • チャート: ピボットテーブル / 集計テーブル: 小計をすべての階層で表示するか、最上位レベルの小計のみ表示するかを選択できるようになりました。
  • チャート: 集計テーブル: 「表示する値の制限」で「現在の値の列」を対象列として選択できるようになりました。

修正された問題

  • AI: プロンプト: オフライン状態でもAIプロンプトのステップメニューが表示されていました。
  • AI: プロンプト: AIプロンプトのダイアログが画面外までドラッグできてしまう問題を修正しました。
  • AI: プロンプト: Rスクリプトエディタ内でEscapeキーを押すと、AIプロンプトのダイアログが誤って閉じられる問題を修正しました。
  • AI: プロンプト: Rスクリプトエディタで新しく入力した列名がハイライトされない問題を修正しました。
  • AI: プロンプト: Rスクリプトエディタで関数名を入力した後、列名のサジェストが正しく機能しない問題を修正しました。
  • AI: プロンプト: エラーステップのツールチップの背景が本来の黒ではなく白く表示されている問題を修正しました。
  • データソース: AIプロンプトのダイアログが開いているときに、ドラッグ&ドロップによるファイルインポートができないようにしました。
  • データソース: MS SQL Server: “Communication link failure” エラーに対応するための再試行(リトライ)機能を実装しました。
  • データラングリング: プロジェクトを複製する際、データフレームのメタデータに不整合がある場合に警告を表示し、データフレームが欠落する可能性があることを知らせるようになりました。
  • データラングリング: 条件を元に計算: 条件パネルのスクロールバーの操作性が改善され、よりスムーズで信頼性の高いスクロールが可能になりました。
  • チャート: 「Sum If」などの条件付き集計の条件を変更した際、自動実行がオフでもチャートがリフレッシュされる問題を修正しました。
  • チャート: ピボットテーブル: 列を降順で並び替えた場合、小計の順序が一致しない問題を修正しました。
  • 一般: Windows: 外部ディスプレイを使用している際に、Exploratoryのウィンドウ位置が予期せずずれる問題を修正しました。

12.1 (Windows版のみ)

2025年3月27日リリース。

修正された問題

  • Windows環境で、テーブル名に日本語の文字が含まれているデータベースのテーブルにアクセスした場合に、“ORA-00942: table or view does not exist” のエラーが発生する問題を修正しました。

12.0

2025年3月26日リリース。

機能強化

  • AI: データラングリングに関する質問をAIに尋ねることができるようになりました。
  • チャート: ピボットテーブル: 集計テーブル: チャートのプロパティダイアログで「ホバー時にポップアップを表示」オプションをオンにすると、合計セルにホバーすることで合計計算に使用された集計関数を確認できるようになりました。
  • チャート: ピボットテーブル: 集計テーブル: チャートのプロパティダイアログで「0を欠損値として表示」オプションをオンにすると、“0” の値を空欄として表示できるようになりました。
  • プロジェクト: データフレーム、ブランチ、ノート、ダッシュボードのコメントを検索できるようになりました。

修正された問題

  • データソース: Excel: データを再インポートするか、インポートダイアログで更新ボタンを押した際に、シート名が更新されない問題を修正しました。
  • データソース: SQLエディタ: 不要な関数のサジェストが表示される問題を修正しました。
  • データソース: SQL: Rの競合が発生した際、「再実行」メッセージが表示されるようになりました。
  • データソース: Teradata: “外部ポインタが無効” エラーでデータベース接続が失敗する問題を修正しました。
  • データラングリング: 特殊文字を含む列名のハイライトが機能しない問題を修正しました。
  • データラングリング: 計算を作成時、括弧内で列のサジェストが表示されない問題を修正しました。
  • データラングリング: ステップエラーが発生した際、エラーメッセージをIntercom AIに尋ねるか、エラーテキストをコピーできるようになりました。
  • データラングリング: ローカルファイルを参照するデータフレームの更新が、プロジェクトをインポート後に失敗する問題を修正しました。
  • データラングリング: 集計: “行数” の横の関数ボックスがデフォルトで無効になっていた問題を修正しました。
  • データラングリング: 削除確認ダイアログがウィンドウの中央に表示されない問題を修正しました。
  • チャート: 数値データをカテゴリに変換し、バケットラベルを “1, 2, 3, 4…” のように数字のみにした場合、チャートが誤ったバケット数を表示する問題を修正しました。
  • チャート: X軸のフォーマットを「パーセンテージ」に設定すると、値が自動的に100倍されるようになりました。
  • チャート: 散布図(集計あり): “色で分割” に列を割り当てると、リファレンスラインが左端から右端まで正しく描画されない問題を修正しました。
  • チャート: 散布図(集計あり): “色で分割” に列を割り当てると、リファレンスラインのラベルが複数の場所に表示される問題を修正しました。
  • チャート: 散布図(集計あり): “色で分割” に列を割り当てると、対角線のリファレンスラインの色を変更できない問題を修正しました。
  • チャート: “累積合計値割合” の表計算がメニューリストに表示されるようになりました。
  • アナリティクス: Prophet – 外部予測変数を複数指定した際に、“実行” ボタンが途中で切れてしまう問題を修正しました。
  • ノート: 数式ブロックの直下のテキストを削除すると、数式ブロック全体が選択されてしまう問題を修正しました。
  • ノート: ノートウィンドウがウィンドウメニューに正しく表示されない問題を修正しました。
  • ノート: パブリッシュボタンをクリックしてから、パブリッシュダイアログが開くまでの遅延を短縮しました。
  • ダッシュボード: テキストパネル内のURLリンクをクリックすると、ブラウザではなくExploratory Desktop内で開かれてしまう問題を修正しました。
  • ダッシュボード: ダッシュボードをパブリッシュした際、パブリッシュ通知メールのサムネイルが1番目のチャートではなく、ダッシュボードのサムネイルを使用するようになりました。
  • ダッシュボード: “すべてのページに適用” オプションを使用してパラメーターを実行し、他のページへ移動すると、読み込み中のアイコンが消えない問題を修正しました。
  • ダッシュボード: パラメーターを実行すると、アプリ全体のレイアウトが上方向にずれる問題を修正しました。
  • ダッシュボード: パラメーターを実行すると、各ダッシュボードパネルのスクロールバーが繰り返し表示・非表示される問題を修正しました。
  • ダッシュボード: タイトルが長いページのプレビューが適切に省略されない問題を修正しました。
  • ダッシュボード: パラメーター – “カタログ更新中にダッシュボードの生成に失敗” というエラーが発生する問題を修正しました。
  • ダッシュボード: ノート: レポートメニューのアイコンがホバー時に表示されない問題を修正しました。
  • パラメーター: SQLクエリのパラメーターを更新するたびに、データが不要に再取得される問題を修正しました。
  • プロジェクト: 特定のリモートプロジェクトをインポートする際、誤ったインポートダイアログが表示され、インポートができない問題を修正しました。
  • プロジェクト: アクティブなプロジェクトが開いている状態でRパッケージのリセットが失敗する問題を修正しました。
  • プロジェクト: Windows: プロジェクトのパブリッシュがZIPエラー(エラーコード15)で失敗する問題を修正しました。
  • 一般: ライセンスキーのリクエストが失敗した際のエラーメッセージを改善しました。
  • 一般: Cmd + バックティックのショートカットキーが他のアプリケーションと干渉する問題を修正しました。
  • 一般: エラーダイアログの “Ask AI” ボタンをクリックすると、エラーメッセージとして “[Object object]” が送信される問題を修正しました。
  • 一般: カタログに多数のアイテムが表示されている場合、削除確認ダイアログが切れてしまう問題を修正しました。
  • 一般: エラーダイアログ内のエラー詳細の表示/非表示のリンクが機能しない問題を修正しました。

11.5

2025年2月18日リリース。

修正された問題

  • データラングリング: 既存の「列を選択」または「列を並び替える」のステップをクリックしても、列選択ダイアログが期待通りに開かない問題を修正しました。

11.4

2025年2月16日リリース。

修正された問題

  • データラングリング: 低解像度のWindows環境でデータフレームを選択すると、UIの右側が空白になってしまう問題を修正しました。
  • パブリッシュ: ダッシュボードをサーバーにパブリッシュした後、ダッシュボードのチャートからCSVをエクスポートすると、値が一致しない問題を修正しました。

11.3

2025年2月14日リリース。

修正された問題

  • チャート: 散布図(集計あり): 色のバケットを「手動」に設定した場合、色を更新できない問題を修正しました。
  • ダッシュボード: データソースを更新した後にダッシュボードを実行しても、他のページのチャートが更新されない問題を修正しました。
  • ダッシュボード: ダッシュボードを開いて実行する際、事前に該当するチャートを開いていないと失敗する問題を修正しました。
  • ダッシュボード: データベースからデータを複数回再インポートすると、接続数が予期せず増加する問題を修正しました。
  • パラメーター: 相互に関連するパラメーターが自身をリストの値のソースとして参照している場合、スピンアイコンが消えない問題を修正しました。
  • パブリッシュ: オフライン時にパブリッシュをキャンセルすると処理に時間がかかり、キャンセル後も「完了」ステータスが誤って表示される問題を修正しました。

11.2

2025年1月25日リリース。

機能強化

  • パラメーター: パラメーターの値を選択した際に、関連する他のパラメーターの値を自動的に更新するオプションをサポートしました。

修正された問題

  • データソース: Snowflake: Exploratory デスクトップのバージョン9.8以前で作成されたデータソースが、デスクトップを9.8以降のバージョンにアップグレード後、Exploratory Serverにパブリッシュできない問題を修正しました。
  • データソース: Excel: Excelファイルから複数のシートをインポート&マージする際に、列データ型の上書き設定が機能しない問題を修正しました。
  • データラングリング: フィルター: 複数選択のパラメーターと「等しい」演算子を使用すると、“Error in coercion to logical(1)“のエラーが発生する問題を修正しました。
  • チャート: ピボットテーブル: データフレームをドラッグ&ドロップした直後に列の並べ替えが機能しない問題を修正しました。
  • チャート: 集計テーブル: 合計設定で「合計&小計」オプションを選択すると、最下部の行ヘッダーセルをクリックしても「詳細を表示」ダイアログが表示されない問題を修正しました。
  • チャート: 「色」に列を割り当て、「特定の値」参照線タイプを選択した場合に、参照線の色設定が機能しない問題を修正しました。
  • ノート: 画像の下にあるテキストを削除すると、削除キーを押した際の挙動がおかしくなる問題を修正しました。
  • ノート: パブリッシュボタンをクリックした際の動作を改善し、スピンアイコンが明確に表示されるようにしました。
  • ノート: テーブル内のテキストのコピー&ペーストが機能しない問題を修正しました。
  • ノート: ノートまたはダッシュボードにチャートが含まれていない場合、Exploratory サーバーへのパブリッシュやEDFファイルへのエクスポートが失敗する問題を修正しました。
  • ノート: 2列レイアウトにチャートを挿入すると正しい位置に挿入されない問題を修正しました。
  • ノート: 箇条書きリストの間隔を更新し、読みやすさを向上させました。
  • ノート: H1形式でフォーマットされた行で削除キーを押した際にH1形式が正しく削除されるように修正しました。
  • プロジェクト:パブリック版でプロジェクトを初めて公開した際、プロジェクトページに情報が表示されない問題を修正しました。

11.1

2025年1月9日リリース。

修正された問題

  • データラングリング: データフレームをフォルダーにドラッグ&ドロップできませんでした。
  • ノート: Windows環境でノートウィンドウのサイズを変更できませんでした。
  • ノート: コードブロック内でバッククォートを入力した後にEnterキーを押すと、削除できない記号が表示される問題が発生していました。
  • ダッシュボード: 同じ名前を持つデータフレームを含むEDFをインポートすると、ヘッダー行に「チャートが見つかりません」というエラーが表示されました。
  • パブリッシュ: データサイズが2GBを超えた場合、データカタログへのパブリッシュに失敗することがありました。

11.0

2024年12月31日リリース。

新機能

ウェブからの編集

  • パブリッシュされたノートやチャートをWebブラウザで新規作成または編集できるようになりました。

チャート、データ、ステップのコピー&ペースト

  • 以下のオブジェクトを複数のプロジェクトのウィンドウ間でコピー&ペーストできるようになりました。以下のものがサポートされています。
    • データフレーム
    • データラングリングのステップ
    • チャート
    • ノート
    • ダッシュボード
  • また、同一プロジェクト内でも複数のデータフレーム間でチャートをコピー&ペーストできるようになりました。

チャートビュー内の実行ボタン

  • チャートビューに「実行」ボタンを追加しました。列の構成を変更したときに自動的にチャートを更新するか、実行ボタンをクリックするまで更新を保留するかを選択できるようになっています。

機能強化

  • チャート: リファレンスライン、トレンドラインのサブメニューを追加し、一般的に使用されているタイプにアクセスしやすくなりました。
  • チャート: トレンドライン: 指数、対数、累乗、多項式といった追加のトレンドラインのタイプをサポートしました。
  • チャート: X軸とY軸の両方にラインがある場合でも、リファレンスライン上に値を表示できるようになりました。
  • ノート: ノート内の画像をフルスクリーンサイズで拡大表示できるようになりました。
  • ノート: 2列レイアウトコンポーネントを追加しました。これにより、2つのチャートを並べて表示できます。
  • ノート: ノートエディタ外からマークダウンテキストをコピーし、書式を保持したままペーストできるようになりました。
  • ノート: 「書式なしでペースト」するためのショートカットキー(Command + Shift + V)をサポートしました。
  • ノート: 見出しテキスト形式の新しいショートカットキーを以下のように割り当てました。
    • 見出し1: Cmd + Option + 1 / Ctrl + Option + 1
    • 見出し2: Cmd + Option + 2 / Ctrl + Option + 2
    • 見出し3: Cmd + Option + 3 / Ctrl + Option + 3
    • Macの場合はCmdに、Windowsの場合はCtrlになります。
  • データラングリング: ステップが無効化されている場合でも、データラングリングステップのコメントが表示されるようになりました。

修正された問題

  • プロジェクト: 同期されたプロジェクトに含まれるダッシュボード内の画像が同期されない。
  • チャート: 表示する値の制限を、以前は計算前に適用していましたが、表計算の後に適用するように変更しています。
  • チャート: ピボットテーブル: Error code 127のエラーが出て、CSVへのエクスポートに失敗することがある。
  • ノート: 色付きのテキストを太字にし再度開くと、アスタリスク(*)が表示されてしまう問題を修正しています。
  • プロジェクト: バージョン履歴に表示されるプロジェクトの作成時刻が正しくない。
  • プロジェクト: Command(またはControl)+ Wキーでウィンドウを切り替えた後、切り替え先のウィンドウでマウスクリックが機能しなくなる。
  • パラメーター: テキスト入力にデフォルト値が指定されていない場合、フィルターでパラメーターを設定する際にエラーが発生する。
  • パラメーター: 値が長いときに表示されるポップアップがサーバーで表示されない。

10.7

2024年8月29日リリース。

機能強化

  • データラングリング: CSVでエクスポートするときに、ダブルクオーテーション(二重引用符)を付けるかどうかを選択できるようになりました。
  • データラングリング: 作成者用と閲覧者用のコメントをサポートしました。
  • データラングリング: 新しいノートエディタを利用したコメント入力に対応しました。
  • チャート: 「繰り返し」に日付列を選択したときの日付のフォーマットの変更をサポートしました。
  • チャート: ナンバー: サブの指標に前の期間の値を表示できるようになりました。
  • ノート: パブリッシュされているノートのヘッダー(見出し)にマウスカーソルを合わせたときに表示されるリンクアイコンをクリックして、H1/H2ヘッダーのURLをコピーできるようになりました。
  • ダッシュボード: テキストパネルの上部マージンの設定をサポートしました。
  • ダッシュボード: チャートと同じように、テキストパネルのタイトルを設定できるようになりました。
  • ダッシュボード: リンクのダイアログから、ダッシュボードの別のページを開くリンクを作成できるようになりました。
  • ダッシュボード/ノート: ログインしているユーザーが、そのコンテンツの作成者のときに、作成者用のコメントが表示されるようになりました。
  • パラメーター: カレンダーと数値のパラメーターにおいて、「選択なし」を選択して、すべての値を返せるようになりました。
  • パラメーター: テキスト入力のパラメーターにおいて、テキストを空にしたときに、欠損値を返せるようになりました。

修正された問題

  • データソース: 他のユーザーが編集したプロジェクトをインポートした後に、そのプロジェクト内のダッシュボードの 「実行(データ再インポート)」をクリックすると、parquetがデータソースのデータフレームにおいて再インポートが失敗することがありました。
  • データラングリング: 日本語の文字を変換すると、結果の文字列の先頭に「⍰」という記号が予期せず表示されることがありました。
  • データラングリング: 日本語テキストを入力すると、文字が予期せず繰り返されることがありました。
  • データラングリング: データを再インポートしようとすると、Cannot read properties of undefined (reading ‘multivalued’).というエラーが出ることがありました。
  • データラングリング: 「値」にhms型の列を選択すると、「ロング型からワイド型へ」が機能しない。
  • データラングリング: hms型のデータを数値型に変換するときの、単位の指定が機能していませんでした。
  • チャート: 前の期間との差が「0%」だったときに値として「In,fin,ity%」と表示される。
  • チャート: 箱ヒゲ図: 「外れ値を含む」のチェックボックスをオンにしても、適切な最大値が表示されない。
  • チャート: ナンバー: サブの指標がない場合でも、ナンバーチャートの下に不要なスペースが表示される。
  • チャート: ピボットテーブル / 集計テーブル: 合計にも表計算の「割合(% of )」の結果を適用する必要があります。
  • チャート: ナンバー: ナンバーチャートで日付/時間型(POSIXct)の表示形式を変更すると、時間部分が消えてしまう。
  • チャート: マーカーを「ライン+サークル」に変更すると、左右の両端に不要なスペースが表示される。
  • アナリティクス: 線形回帰 / ロジスティック回帰: 「影響度」のタブで、P値が「0.0001」未満の場合は、「<0.0001」と表示する必要があります。
  • アナリティクス: 生存曲線: 「生存率表」のタブでは、比率の値ではなく、パーセント表記で値を表示する必要があります。
  • アナリティクス: 生存曲線: 色で分割に列を指定していなくても、「サマリ」タブに「行数」と「行数(TRUE)」の情報を表示するべきです。
  • ノート: Rスクリプトのコードブロックで’plot’関数を使った際に、ノートエディタ内では機能しない。
  • ノート: コードブロックを追加すると、コードブロックの前にある画像が削除される。
  • ノート: 設定にある「テーブルで表示する行の最大数」をクリックすると、設定ダイアログが消えてしまう。
  • ノート: ノートを閉じた直後に同じノートを再度開くことができない。
  • ノート: カーソルを上に動かしても、画像が選択されない。
  • ノート: Shift + 下矢印キーでテキストを選択すると、画像のみが選択される。
  • ノート: 以前のバージョンのExploratory デスクトップでノートを公開した時に、「データ」および「EDF」のオプションをオンにしなかった場合、最新バージョンで再パブリッシュをしても、パブリッシュされたビューに「詳細を表示」のオプションが表示されない。
  • ノート: ダッシュボード: Rコードブロックにウォーターフォールチャート、またはvisNetworkのチャートを追加してプレビューをクリックすると、新しいプレビューのウィンドウが生成される。プレビュータブの下に表示がされるべきです。
  • ダッシュボード: 使用可能なセクションに合うように、Rスクリプトの出力サイズを最適化しました。
  • プロジェクト: データフレーム名の先頭に「0.」が含まれている場合、名前によるデータフレームの並び替えが期待通りに機能しない。
  • プロジェクト: プロジェクトを開くと、時々“EMFILE: too many open files, open”のエラーが表示される。
  • プロジェクト: チームで公開しているプロジェクトを閉じた後も、編集中の緑色のランプが点灯したままになる。

10.6

2024年7月26日リリース。

機能強化

  • データラングリング: 条件を元に計算、または新しい置き換える: 新しい値のデータ型としてFactor(順序付き文字列)がサポートされました。

修正された問題

  • データソース: SQL接続: 追加パラメーターのフィールドにシンタックスの検証が追加されました。
  • データラングリング: 条件を元に計算、または新しい置き換える: 対象となる列でチェックを外しても、選択された列を外すことができない。
  • データラングリング: 条件を元に計算、または新しい置き換える: トークンを複製して別のステップとして作成すると、不要な列が追加される。
  • チャート: 表示する値の制限と表計算を同時に使用した場合、日付列に対する表示する値の制限が期待通りに機能しない。
  • ダッシュボード: ダッシュボードに変更が加えられていない場合、パブリッシュ、または再パブリッシュのボタンをクリックしてもダッシュボードは実行されないようになっています。
  • パブリッシュ: データのオプションは常に有効になり、パブリッシュのダイアログから削除しました。
  • 一般: プロジェクト管理画面のメニューから接続しているサーバー(exploratory.io、ホステッド、またはオンプレミス)を確認できるようになりました。

10.5

2024年7月20日リリース。

修正された問題

  • データソース: SQL: データベースのインポート完了の通知が表示され、OKボタンをクリックした時にSQLのプレビューが実行されているとエラーが発生する。
  • データラングリング: フィルタ: UTC以外のタイムゾーンでPOSIXct型の列をフィルタする場合、「日付」で処理をしても正しい日付でフィルタできない。
  • データラングリング: マージを実行したステップより前のステップが選択されている場合、「参照されている全てのソースデータを再インポート」が表示されないようになっています。
  • ノート: 画像のキャプション領域でEnterキーを押しても新しく行が追加されない。
  • ノート: ノート内のチャートに使用されているデータフレームが削除された場合、コンテンツが空白で表示される。
  • ダッシュボード: 空の値に対して「すべて選択」を使用するようにパラメーターが設定されている場合、階層関係のあるパラメーターが機能しない。
  • ダッシュボード: ダッシュボードをプレビューまたはパブリッシュする時に、「画面内に収める」のオプションが機能しない。
  • インストール: Windows環境で、ユーザーホームディレクトリ内の\AppData\Local\Programs\RフォルダにインストールされたRが認識されない。

10.4

2024年7月15日リリース。

機能強化

  • データラングリング: ワイド型からロング型へ: キー列のデータ型の自動検出をサポートしました。
  • データラングリング: 条件を元に計算、または値を置き換える: 新しい値のデータ型の自動検出をサポートしました。
  • チャート:表示する値の制限: すべてのチャートタイプで相対日付をサポートしました。
  • パラメーター: データのインポートダイアログでパラメーターの順序を変更できるようになりました。

修正された問題

  • データソース: Exploratoryデスクトップがオフラインモードのときに、SQLのインポートに失敗する。
  • データソース: データのインポート中にキャンセルをすると、データソースのステップのトークンをクリックできなくなる。
  • データソース: プロジェクトにカスタムRパッケージが関連付けられているにも関わらず、該当のRパッケージがないと、SQLのインポートに失敗する。
  • データラングリング: 条件を元に計算、または値を置き換える: OR演算子を使用するカスタム条件が、期待通りに機能しない。
  • データラングリング: 条件を元に計算、または値を置き換える: 前のステップのデータが0行だと、デフォルトに選択した列が表示されなくなる。
  • データラングリング: 計算を作成: 関数のヘルプでスクロールをすると、ハイライトされている関数のヘルプが正しく表示されない。
  • データラングリング: 「参照されている全てのソースデータを再インポート」のオプションが表示されないことがある。
  • チャート: ピボット/集計テーブル: 行または列の日付のフォーマットを変更すると、詳細データを表示したときに対象行のデータが返らない。
  • チャート: 散布図: X軸とY軸に同じカテゴリ型の列を割り当て、「色で分割」と「繰り返し」に列を選択すると、Y軸のテキストの順序がおかしくなる。
  • チャート: 日本語の凡例名の並び順がMacとWindowsで異なる。
  • アナリティクス: Prophet: 外部予測変数を選択し、季節性のモードに乗法的を選択すると、影響度のタブが空白になる。
  • ノート: パラメータを変更しても、Rのコードブロックのプレビューが動的に更新されない。
  • ノート: Rのコードブロックを使って、visNetworkパッケージを使ったチャートを作成すると、チャートが想定よりも広く表示されてしまう。
  • ノート: テキストにリンクを設定するときに、リンクの挿入ダイアログを閉じただけではURLが保存されない。
  • ダッシュボード: チャートピッカー: マージまたは結合のステップを開くと、データフレームの一覧において、無効なデータフレームとして表示されてしまう。
  • ダッシュボード: 「適用」ボタンを3回クリックすると、テキストウィジェット内のテキストが消えてしまう。
  • ダッシュボード: HTMLとしてエクスポートすると、UIが壊れてしまう。
  • ダッシュボード: テキストウィジェットで、数式オプションがサポートされていませんでした。
  • ダッシュボード: プレビューモードでダッシュボードのページを切り替えると、Rのコードブロックで作成したvisNetworkパッケージを利用したチャートが消えてしまう。
  • ダッシュボード: ダッシュボードを開いているときにSQLのデータソースからデータを再インポートすると、確認のダイアログが表示されてしまう。
  • パブリッシュ: パブリッシュが失敗したときに、「再度試す」リンクが通知に表示されるようになりました。
  • パブリッシュ: 「実行」のドロップダウンから「データ再インポート」を選択していると、ダッシュボードをパブリッシュするときにデータを2回取得することがありました。
  • パラメーター: 「選択なしをサポート」オプションで「全ての値を返す」を選択していると、関連するデータ・フレームが更新されたときに、全ての値を返さない。
  • プロジェクト: プロジェクトを開こうとすると、「RServeが起動しないため、プロジェクトを開くことができませんでした。」というエラーが頻繁に表示される。

10.3

2024年6月19日リリース。

機能強化

パラメーター: 値をデフォルト値にリセットできるようになりました。

修正された問題

  • データソース: Google BigQuery: Googleクラウドストレージ経由でデータをインポートすると、インポート結果がおかしくなる。
  • データソース: データを再インポートした後にプロジェクトを改めて開くと、更新日ではなく、以前の「最終インポート日」が表示される。
  • サマリビュー: クイックフィルタが適用されていないデータがエクスポートされてしまう。
  • データラングリング: ロングからワイド型へ: 「値」に文字列型の列を選択したときに、誤って数値型の列のための集計関数が表示される。
  • データラングリング: ‘Cannot read properties of undefined’というエラーが表示され、ステップのコピーとペーストに失敗する。
  • データラングリング: テキストデータの加工: 1つのステップ内に複数のトークンがある場合、全てのトークンの内容が最初のトークンの内容になってしまう。
  • データラングリング: 結合時に使用するキー列の列名が別のデータフレームと同一の場合、循環関係のエラーが発生しました。
  • チャート: 色: 日付列の論理条件が期待通りに機能しない。
  • ダッシュボード: チャートにコメントがある場合、常に緑色のコメントアイコンを表示するようになります。
  • ダッシュボード: パラメーターが変更されても、RのコードチャンクとインラインRコードブロックの出力が更新されない。
  • パラメーター: EDFファイルをインポートした後に表示されるさまざまなパラメーター関連のエラーを解決しました。
  • パラメーター: 文字型の値のパラメーターで「リスト」のスタイルを選択すると、「値のリスト」のオプションにTRUE/FALSEの値が誤って自動入力される。
  • プロジェクト: プロジェクトを開いて読み込み中の時に、プロジェクトのヘッダに誤った名前が表示される。

10.2

2024年6月5日リリース。

修正された問題

  • データラングリング: ブランチのブランチをしたデータフレームを開く、または作成すると空の画面が表示される。

10.1

2024年6月3日リリース。

修正された問題

  • データソース: インポートダイアログでコネクションを切り換えても、スキーマとテーブルが正しく更新されない。
  • データラングリング: ステップの実行時にデータインポートステップの「インポート日時」情報が誤って更新されてしまう。
  • チャート: ナンバー: 比較する値がない場合、フィールドを空白として表示するのではなく「-」を表示するようになりました。
  • チャート: ナンバー: パラメーター設定を適用した後にデータがない場合、数値の高さが大きくなる。
  • チャート: ピボット/集計テーブル: 表計算の「差」や「差の割合」で「絶対値として計算する」がサポートされるようになりました。
  • チャート: ピボット/集計テーブル: 行に2つの列が割り当てられている場合、1番目の列を「隠す」機能を使って非表示にした後でその列を削除すると、「隠す」のオプションが次の列に引き継がれてしまう。
  • パラメーター: パラメーターが参照しているステップが削除されると、パラメーターの列の割り当てが無効になる。自動的に削除された前のステップが割り当てられるようになりました。
  • プロジェクト: 以前プロジェクトのパブリッシュに失敗していた場合、変更があったプロジェクトを閉じることができなくなる。

10.0

2024年5月23日リリース。

機能強化

  • データソース: インポート: CSV: 「データタイプを指定」のオプションから全ての列を強制的に文字列としてインポートできるようになりました。
  • データラングリング: フィルタの「相対日付」の演算子で、直近のN年/月/週/日のオプションをサポートしました。
  • チャート: リファレンスライン: 範囲のタイプに「管理限界(mR)」および「管理限界(X)」を利用できるようになりました。
  • チャート: リファレンスライン:トレンドライン: ラインの計算に利用するベースデータの範囲を指定できるようになりました。
  • チャート: リファレンスライン: X軸にDate/PoSIXct型の列を選択したときに、「前の期間の値」を選択できるようになりました。
  • チャート: リファレンスライン: チャート上に表示した凡例のテキストの位置(左または右)を指定できるようになりました。
  • チャート: トレンドライン: ラインの計算に利用するベースデータの範囲を指定できるようになりました。
  • チャート: 色の設定において、Date型またはPOSIXct型の列を手動でグループに分けられるようになりました。
  • チャート: 集計関数を使って、色/凡例の並び順を指定できるようになりました。
  • チャート: X軸の「表示する値の制限」の中で「相対日付」をサポートして直近N年/月/週/日で値を制限できるようになりました。
  • チャート: 「繰り返し」の並び順を設定できるようになりました。
  • チャート: ナンバー: メインの指標に加えてサブの指標を表示できるようになりました。
  • チャート: ナンバー: 最後の期間の値をサブの指標として表示できるようになりました。
  • チャート: ピボットテーブル: 列の値の並び順を指定できるようになりました。
  • チャート: ピボットテーブル/集計テーブル: 行の値の並び順を指定できるようになりました。
  • チャート: ピボットテーブル/集計テーブル: 列のヘッダーのテキストが長いとき、折り返し、または全てのテキストを1行で表示ができるようになりました。
  • アナリティクス: 因子分析: 重み(表)のタブで表示される変数名が長いときにも全体を表示できるように、テキストの折り返しのオプションをサポートしました。
  • ノート: Rスクリプトのコードブロックの表示サイズを大きくできるようになりました。
  • ノート: デフォルトの幅で高さだけを高くすることができるようになりました。
  • ノート: ノート内でテキストの検索と置換ができるようになりました。
  • パラメーター: 「計算の作成」などのステップでパラメーターを使って列を動的に選択できるように、‘quote’オプションをサポートしました。
  • プロジェクト: 左側に表示されるデータフレームやレポートのリストを名前順で並び替えたときに、数字で始まるデータフレームやレポートは、数値をもとに並び替えられるようになりました。
  • プロジェクト: チームで共有されているプロジェクトに、アカデミックプランのユーザーを招待できるようになりました。

修正された問題

  • データソース: BigQuery: 文字列を含むデータをインポートする時に、列のデータ型が文字列から数値に変更される場合がある。
  • データソース: Excel: 列選択で「All」のチェックを外しても、プレビューに表示されていない列が誤ってインポートされてしまう。
  • データソース: Excel: 複数のExcelのシートのインポート&マージをしたデータにて、ソースのステップをクリックした時に間違ったダイアログが表示される。
  • データソース: Google Analytics: インポートダイアログを開いた時に、以前選択したプロファイルが復元されない。
  • データソース: SQLのデータを再インポートすると、関連づけられたパスワードが空の場合に無限にスピンが表示される。
  • データソース: SQL: データインポートのジョブをキャンセルした後にError code 127が表示される。
  • データラングリング: チャート: 表計算: 列データの先頭に欠損値(NA)がある場合、累積合計などで全ての値が欠損値として返される。
  • データラングリング: 複数の「条件を元に計算」のステップを1つのステップにまとめることができない。
  • データラングリング: ステップのデータをGoogle Sheetsにエクスポートする際に、「既存を上書き」のオプションを使用してエクスポートした時にError code 127が発生する。
  • データラングリング: フィルタステップラベル: 現在の選択のみが表示されるはずが、現在選択している値と以前選択された値の両方が表示されてしまう。
  • データラングリング: フィルタ: 欠損値を除くなどのメニュー名を更新し、メニューの表示順序を変更しました。
  • データラングリング: 結合: 結合先データフレームがブランチのブランチである場合、右外部結合のステップを作成した後に再度ダイアログを開くと、結合先データフレームのキー列が無効になる。
  • データラングリング: 結合: 結合先データフレームで「グループ化」がされている場合、結合先データフレームの列の選択からグループ列を削除できない。
  • データラングリング: データフレームを複製する時、複製元にあるチャートのコピーに失敗する場合がある。
  • データラングリング: テキストデータの加工:新しい値が欠損の場合、プレビューのテーブルの新しいには <NA> として表示されるようになります。
  • チャート: バーチャートでX軸に多くの一意な値の数を持つ列を割り当てた場合、“idx must contain one integer for each level of f”のエラーによって描画に失敗する。
  • チャート: ヒートマップ:設定から「桁区切りを使う」のオンまたはオフをすると、デフォルトの小数の桁数がプロット領域の値に適用されない。
  • チャート: ナンバー: 差 / 比率のダイアログで「閉じる」のボタンをクリックして、別のチャートタブに移動し、再度元のチャートに戻ると値が「0」になる。
  • チャート: ピボットテーブル: テキストの折り返しを有効にすると、列の幅が広くなってしまう。
  • チャート: ピボットテーブル: 値に複数の列を割り当て、列に1つの列を割り当てた場合、フォーマットのダイアログで明示的に列の幅を設定した場合でも、列の幅が余計に広くなる。
  • チャート: ピボット: 集計テーブル: 「Inf」の場合に表示するテキストをカスタマイズできるようになりました。
  • チャート: リファレンスライン: 色で分割に列を割り当て、リファレンスラインのグループ化に「全体」を選択した場合、線が左から右に描かれない。
  • チャート: リファレンスライン: X軸の列がPOSIXct型であっても、特定の値に日付形式(yyyy/mm/dd)で入力できる必要があります。
  • チャート: テーブル: データに全角のアルファベットが含まれている場合、テキストの並び替え順序がテーブルとピボット間で一致しない。
  • チャート: Y軸に複数の列を割り当てた場合でも、「値がない場合の処理」のメニューが表示されるべきです。
  • チャート: Y軸に複数の列が割り当てられている場合、Y軸の各列の色は変更できるべきです。
  • ダッシュボード/ノート: デフォルトの並び順が「名前」から「更新日」に変わりました。
  • ダッシュボード: パラメーターの入力タイプを単一選択から複数選択に変更した後、ダッシュボードを開くと”TypeError: e.value.map is not a function error”のエラーが発生する。
  • ダッシュボード: データフレームを参照するパラメーターを含むダッシュボードを実行すると、“object not found” のエラーが発生することがありました。
  • ダッシュボード: ドラッグ&ドロップで最後の行にあるチャートを別の行に移動した際に、空の行がページから削除されてしまう。
  • ダッシュボード: ダッシュボードで使用されているチャートが特定のステップに固定されていない場合、パブリッシュされたダッシュボードで詳細データを表示しようとすると”Error code 3”のエラーが発生する。
  • ダッシュボード: 実行ボタンをアップデートし、ドロップタウンから「実行(データの再インポート)」を選べるようになりました。
  • ダッシュボード: ダッシュボードにナンバーチャートのコメントが表示できるようになりました。
  • ダッシュボード: データソースがGoogle Driveであるダッシュボードをパブリッシュする際に、コネクションが見つからないというエラーが表示される。
  • ノート: URLを追加するとハイフンがエスケープ文字に置き換わってしまう。
  • ノート: 文の末尾にスペースがあるとインラインのコードブロックを削除できない。
  • ノート: Exploratory Desktop V9で作成したノートをインポートすると、箇条書き内にチャートが配置され、正しく表示されないことがありました。
  • ノート: LaTeX: チートシートへのリンクを追加しました。
  • ノート: ノートの内容が消えてしまうことがありました。
  • ノート: 文頭にあるインラインのコードブロックの内容を削除すると、インラインのコードブロックを削除することが難しくなる。
  • ノート: 「リフレッシュ」ボタンをクリックしたときにも元のスクロール位置を記憶するようになりました。
  • ノート: インラインのコードブロック直後に入力した文字の前にカーソルを置くことができませんでした。
  • ノート: インラインのmath構文のコードブロック直後にカーソルを置くことができませんでした。
  • ノート: 画像の横に表示される円形アイコンをクリックして明示的に画像を選択しないと、画像のカットとペーストができませんでした。
  • ノート: 地図のチャートの選択を解除してもサイズ変更のポップアップが消えない。
  • ノート: カーソルキーで地図のチャートを選択しても、サイズ変更のポップアップが表示されない。
  • パラメーター: パラメーター名が長い場合、マウスオーバーした時にポップアップが表示されるようになります。
  • パラメーター: データフレームから値を取得する際に、データフレーム名が長い時にマウスオーバーするとポップアップが表示されるようになります。
  • パラメーター: パラメーターが参照しているステップを削除した後に、そのパラメーターを使用しているステップを選択すると、“object not found” のエラーが表示される。
  • プロジェクト: 現在編集中のユーザーのポップアップはプロジェクトを再パブリッシュする権限を持たないユーザーに表示されるべきではありません。
  • プロジェクト: 複数のプロジェクトを開いている場合、プロジェクトを閉じようとするとフリーズしてしまう。
  • プロジェクト: プロジェクトをパブリッシュした後に、プロジェクトを閉じることができない。
  • プロジェクト: 変更履歴から復元をした際、“does not match index”というエラーが表示され、復元に失敗する。
  • 一般: 値の複数選択のウィジェットに「閉じる」ボタンを追加しました。
  • 一般: 「チャットを閉じる」ボタンをクリックしても、チャットのボタンが残り続ける。
  • 一般: プロジェクトやデータフレームなどのコンテンツの名称変更ダイアログで、常に各コンテンツのIDが表示されるようになりました。

9.10

2024年3月24日リリース。

修正された問題

  • ノート: パラメーターウィンドウから「選択された値を保存」にチェックしてパラメーターの値を変更すると、誤って別のノートのパラメーターの値が更新される。
  • プロジェクト: プロジェクトの読み込みが完了する前に、スピンアイコンが途中で閉じてしまう。

9.9

2024年3月21日リリース。

機能強化

  • チャート: Y軸を同期する際のベース軸(Y1軸またはY2軸)の選択をサポートしました。
  • ノート: 追加したチャートの境界線を表示するオプションをサポートしました。
  • パラメーター: 全ての値を返したときや、空の値を返したときのラベル名を上書きできるようになりました。

修正された問題

  • チャート: バー: 欠損値(NA)を含む日付列を色に割り当てたとき、欠損値(NA)がカテゴリとして表示されませんでした。
  • チャート: 「色、グループ、並び順の設定」から、「色の方向」を変更したときに、その設定が記憶されない。
  • チャート: リファレンスラインの「グループ化」に「色」を選択したときに、リファレンスラインの長さがグループのデータの範囲と一致しない。
  • チャート: 地図: 設定から「色のフォーマット」を「パーセント」に変更すると不適切な凡例が表示される。
  • ダッシュボード: テキスト編集のダイアログの中でリンクのボタンをクリックすると、編集ダイアログが閉じてしまう。
  • ダッシュボード: パラメーターを変更してもダッシュボード内のチャートが更新されない。
  • ダッシュボード: 範囲のパラメーターを利用するチャートが含まれていると、プレビューしたときに「error code 127」というエラーが表示される。
  • ダッシュボード: v9より前のバージョンで作成したダッシュボードのテキストに、HTMLタグが含まれているとテキストを編集できなくなってしまう。
  • ダッシュボード: テキスト・ウィジェット: ダッシュボードを実行すると、テキストの色の設定がリンクに置き換わってしまう。
  • ダッシュボード: Tabキーを押すと、パラメーターペインが表示されてしまうことがある。
  • ダッシュボード: パラメーターの設定で「全てのページに適用」にチェックを付けて実行をしても、アクティブでないページのチャートが更新されないことがある。
  • データソース: CSVのファイルをインポートすると、「could not find function “silver”」というエラーメッセージが表示される。
  • データソース: データベース/Rスクリプト: インポートダイアログにおいて、複数選択のパラメーターのリストから値を選択できない。
  • ノート: チャート: Windowsでバーチャートの上に表示される値が見切れてしまう。
  • ノート: 見出しのルールバーから「本文」を適用しても、太字、斜体、取り消し線、色、およびインラインコードの書式設定がクリアされない。
  • ノート: データの再インポート: 更新されたデータが反映されることを確認するために、「データを再インポートしてからリフレッシュ」を2回実行する必要がありました。
  • ノート: LaTeX書式を有効にしても、数式の構文が機能しない。
  • ノート: リンクの挿入で「見出し」を使用したときに、見出しのレベルに応じてインデントを整える必要があります。
  • ノート: HTMLの挿入は、プレビューおよびパブリッシュでは機能しない。
  • ノート: 見出しのテキストに特殊文字が含まれている場合、見出しへのリンクが機能しない。
  • ノート: 数式を使用した時のアウトプットはエディタとプレビュー間で統一されている必要があります。
  • ノート: 数式の構文はHTMLプレビューで機能しない。
  • ノート: テーブルを選択した後に削除キーを押すだけでは、テーブルが削除できない。
  • ノート: Rスクリプトの下部にコメント行がある場合、Rスクリプトのプレビューが失敗する。
  • ノート: Rのコードを使用した時のアウトプットはエディタとプレビュー間で統一されている必要があります。
  • ノート: R/HTML/数式のコードブロックの領域の選択方法をアップデートしました。
  • ノート: $記号への依存を排除し、 math y = ax + b のようなインラインの数式がサポートされるようになりました。
  • ノート: テーブル: セルのテキストに改行が入力できない。
  • ノート: 既存のチャートにコメントを追加した際に、ノートのエディタにコメントが表示されない。
  • ノート: ノートをパブリッシュするときに、イメージのキャプションが中央揃えであるはずが左揃えになってしまう。
  • ノート: プロジェクト間でノートの内容をコピーして貼り付けると、元の内容の形式を保持せずにマークダウンテキストとして貼り付けられる。
  • パラメーター: ノートを更新する度に、隠したパラメーターが表示されてしまう。
  • プロジェクト: プロジェクトを閉じると、指定したレポートの並べ替えの設定がデフォルトに戻ってしまう。
  • パブリッシュ: ダッシュボード: ノート: EDFファイルのダウンロードは許可せず、チャートのデータだけをダウンロードできるオプションをサポートしました。

9.8

2024年3月6日リリース。

機能強化

  • データソース: Snowflake: Exploratory サーバーにおける秘密キーファイル認証に対応しました。
  • チャート: テーブル: 「列のフォーマット」の設定から「イメージとして扱う」オプションを有効にして、画像のURLを画像として読み込めるようになりました。
  • ノート: ノート内のチャートに「編集ボタン」を追加し、直接チャートを開けるようになりました。
  • ノート: コンテンツの追加メニューに「HTML」を追加して、ノート内にHTMLのコードを埋め込めるようになりました。
  • ノート: コンテンツの追加メニューに「Webページ」を追加し、ノートにWebページを埋め込めるようになりました。
  • ノート: ノート内の「ヘッダー」リンクをサポートし、同じノート内のヘッダー(H1、H2)にジャンプするテキストリンクを作成できるようになりました。
  • ノート: 画面の左側に表示されるノート名にカーソルを合わせると、各ノートのサムネイルが表示されるようになりました。
  • ノート/ダッシュボード: チャートやアナリティクスをノートに追加するためにデータフレームを選択するときに、データフレームを「名前」または「更新日」でソートできるようになりました。

修正された問題

  • データソース: Mac: 保存したデータ・コネクションのパスワードが消えて、パスワードを再入力しなければならないことがある。
  • チャート: X軸にリファレンスラインを引いていると「0をY軸に含む」オプションが適切に動かない。
  • チャート: ピボットテーブル: 詳細データからデータをエクスポートしたときに、100列までしかデータがエクスポートされない。
  • ノート: イメージのサイズを変更した際に、イメージが小さいとイメージが誤った位置に移動してしまう。
  • ノート: コードブロックで”<“または”>“の記号が使用されていると、既存のノートが開けない。
  • ノート: リフレッシュボタンを複数回クリックすると、他のRプロセスの実行中によるエラーが発生する。
  • ノート: 既存のノートを開くと、保持する必要があった空行も削除される。
  • ノート: 複数のレベルの箇条書きを含むテキストをコピーして貼り付けると、最初のレベルのテキストのみが追加される。
  • ノート: Exploratory デスクトップ内で同じノートのコンテンツを2度ペーストすると、2回目のペーストがマークダウンテキストとして貼り付けられる。
  • ダッシュボード: チャートに使われているデータソースの1つがローカルのParquetファイルの場合、ダッシュボードのスケジュールに失敗する。
  • ダッシュボード: サーバーでパブリッシュされているダッシュボード内のチャートをクリックすると、チャートのピンが特定のステップに固定されていない場合にエラーが発生する。
  • ダッシュボード: ダッシュボードを実行した後に再パブリッシュをすると、別のRプロセスの実行によるエラーが発生することがある。
  • ダッシュボード: X軸に列が割り当てられていない横向きのバーチャートで、いずれかのバーをクリックした時にインタラクティブフィルターが機能しない。
  • パラメーター: 1つのパラメーターのデータフレームの選択を変更すると、他のパラメーターのデータフレームの選択も一緒に変更される。
  • プロジェクト: プロジェクトを開いたときに空の画面が表示されることがある。
  • プロジェクト: データのインポートダイアログが開いている状態でプロジェクトを閉じると、インポートダイアログの一部しか表示されなくなってしまう。
  • プロジェクト: プロジェクトリストでスピンアイコンが表示されているときに左側のメニューをクリックできてしまう。

9.7

2024年2月22日リリース。

機能強化

  • ノート: ツールバーのボタンにツールチップ(機能名、キーボードショートカット)を表示する機能をサポートしました。

修正された問題

  • データソース: Amazon Aurora: バンドルされているSSL証明書ファイルが廃止されたため、Amazon Auroraへのアクセスに失敗しました。
  • データラングリング: 列名が”_“で始める列を選択した場合、「重複行を除く」が機能しない。
  • チャート: 繰り返しが使用されている場合、Y軸に対して特定の色を割り当てることができない。
  • チャート: 設定からチャートの各ステップの幅に「0.1」を設定すると、「0.00001」にすぐに切り替わってしまう。
  • チャート: Y軸に複数の列を割り当て、それらの列に個別に色を指定した際に、ドラッグ&ドロップで列の順序を変更しても色の割り当てが追従しない。
  • ノート: style、image、scriptなどのHTMLタグが含まれている場合、ノートを開くことができない。
  • ノート: 更新されたチャートと更新されていないチャートの両方が含まれる場合、ノートをリフレッシュしてもノート上のチャートが更新されない。
  • ノート: 繰り返しを使ったチャートで高さにFullのサイズのオプションがある場合、チャートのデフォルトの高さはより高くすべきです。
  • ノート: 複数の箇条書きに同時に色を適用すると、最初の項目の先頭に不要な文字が挿入されました。
  • ノート: 別のノートから画像をコピーすると、エスケープされたマークダウンのテキストとしてコピーされる。
  • ノート: Macのメモアプリからテキストをコピーして貼り付けると、上部に不要なHTMLタグが表示され、不要な改行も挿入される。
  • ノート: 繰り返しを使用するチャートの列の数を変更することができない。
  • ダッシュボード: パラメーターが別のパラメーターと依存関係がある場合、依存関係があるパラメーターがパラメーターペイン内に表示されない。

9.6

2024年2月14日リリース。

機能強化

  • ノート: テキストに色をつけられるようになりました。
  • パラメーター: それぞれのダッシュボードやノートで指定したパラメーターの値が保存されるようになりました。
  • パラメーター: 「自動実行」にチェックをしたコンテンツ(ダッシュボードなど)をパブリッシュした場合、パブリッシュされたコンテンツでも「自動実行」がオンになるようになりました。

修正された問題

  • データソース: CSV: UTF-8以外のエンコーディングのファイルに特殊文字が入っている場合、インポートがハングしてしまう。
  • データソース: テキスト・インプット: データソースのダイアログを開くと別のデータフレームの内容が表示される。
  • データラングリング: ジョブをキャンセルすると、‘TypeError: A.map is not a function’というエラーが表示される。
  • データラングリング: 混乱を防ぐため、列ヘッダーメニューから「グループ化」を取り除きました。「グループ化」はステップメニューの方からアクセスできます。
  • データラングリング: 複数の「条件を設定して置換」のステップを1つのステップにまとめると、すべてのトークンで表示される内容が、最初のトークンの内容になってしまう。
  • チャート: 箱ヒゲ図: 「外れ値を含む」のチェックボックスの設定を変えても中央値、第一四分位、第三四分位の値が変化しない。
  • チャート: 10以上あるカテゴリにグラデーションのカラーパレットを割り当てたときに、「色、グループ、並び順」のダイアログ内のカラーパレットと、グラフのパレットが一致しない。
  • チャート: その他グループ: カテゴリの数が多い場合、ダイアログで表示されるカテゴリのリストが見切れてしまう。
  • チャート: ピボットテーブル: 集計テーブル: サマリビューからチャートを作成し、タイプを「ピボットテーブル」に切り替えると合計が表示されない。
  • チャート: ピボットテーブル: フォントサイズを変更しても、列ヘッダーのテキストのサイズが変わらない。
  • ノート: バージョン9.0より前のバージョンで作成されたノートにHTMLタグが含まれている場合、ノートが開けない。
  • ノート: 上矢印キーを押すとパラメーターのUIが表示され、消せなくなる。
  • ノート: ノートにHTMLタグがある場合、タグ内のテキストをクリックすることができない。
  • ノート: 複数の行を選択してコードブロックボタンをクリックすると、それらの行が改行なしの単一行としてまとめられてしまう。
  • ノート: ノートを再度開いた時にYouTubeの動画の読み込みが遅い。
  • ノート: 箇条書きのリスト内にチャートを挿入できないようにしました。
  • ノート: 外部のブラウザからコピーしたテキストを貼り付けた時に、全てのテキストが1つの段落として貼り付けられる。
  • ノート: サイズの大きなノートを編集する際に、UIが非常に遅くなる。
  • パラメーター: 日付のパラメーターのデフォルト値である日付の最大値に自動的に更新されない。
  • プロジェクト: プロジェクトを閉じた後、データフレーム、レポートの並び順の設定が保存されていない。
  • プロジェクト: 複数プロジェクトを開けたり閉じたりしていると、特定のタスクを流したがプロジェクトが開けなくなる。
  • プロジェクト: チャットウィンドウを複数回開いたり閉じたりし、チャットウィンドウ内のURLリンクをクリックすると同じブラウザが複数タブで開かれる。

9.5

2024年1月29日リリース。

機能強化

  • データラングリング: テキストデータの加工および、列名に対するテキストデータの加工にて、「指定した文字の中の文字列」に「余計な空白を取り除く」のオプションをサポートしました。
  • ノート: ツールバーの引用句ボタンをクリックして、通常のテキストと引用句フォーマットを切り替えられるようになりました。
  • ノート: ツールバーの箇条書きボタンをクリックして、通常のテキストと箇条書きフォーマットを切り替えられるようになりました。
  • ノート: ノート内にヘッダーテキストがない場合、ノートのアウトプットに目次領域が表示されなくなりました。
  • ノート: 「LaTeX書式を有効にする」オプションがプロパティに追加されました。数式を書く場合にはオンにすることができます。
  • ノート: 挿入したチャートや画像のサイズを「中間」に設定したときに、それらが目次領域に重ならないようにしました。

修正された問題

  • サマリビュー: 複数の列の計算を作成をした場合、サマリビューには前のステップの情報が表示されてしまう。
  • データラングリング: 他の列ヘッダメニューをクリックしても、元々開いていた列ヘッダメニューが閉じない。
  • チャート: 余白の自動調整のオプションが有効になっているにも関わらず、余白に指定されている値が使われてしまう。
  • チャート: パイ / ドーナツチャートのデフォルトの余白の設定を更新し、チャート上の中央に表示されるようになります。
  • チャート: チャートを全画面表示にしチャート上をクリックした際、詳細データの表示ダイアログが表示されない。
  • ノート: テキストを選択した状態でツールバーのコードブロック・アイコンをクリックすると、選択していたテキストが削除されてしまう。
  • ノート: プレビュー前に、EDFをエクスポートすると失敗する。
  • ノート: 外部のブラウザから複数行のテキストをコピー&ペーストした後に、ツールバーの箇条書きアイコンをクリックすると、最初の行しか箇条書きにならない。
  • ノート: 箇条書きのリスト中で「-」と入力して、スペースキーを押すと、行が削除されてしまう。
  • ノート: 画像を挿入した直後にEnterキーを押すと、チャートの下ではなく、上に新しい行が追加されてしまう。
  • ノート: チャートの全画面表示中にチャートをクリックしても、データの詳細ダイアログが表示されない。
  • ノート: ノートを再度開いたときに “not found”というメッセージが表示され、チャートが表示されないことがある。
  • ノート: パイチャートで値を表示したときに、上部の値が見切れてしまう。
  • ノート: ノート内のテキストが多いときに矢印キーでカーソルを動かす際の動きが遅い。
  • ノート: 複数の画像を挿入しているときに、矢印キーで上下に移動すると、急激なスクロールが発生する。
  • ノート: コピー&ペーストしたテキストをヘッダーに設定すると、1行目だけでなく、ペーストした全てのテキストがヘッダーになってしまう。
  • ノート: ’$‘記号で囲まれたテキストが、インラインの数式として扱われてしまう。
  • ノート: 外部ブラウザからテキストをコピー&ペーストしたときに、「#」「.」「*」のようなマークダウンの構文で利用されている特殊文字が含まれていると、テキストが適切にコピーされない。
  • ダッシュボード: ダッシュボードに1ページしかない場合、ページ名の変更が機能しない。
  • ダッシュボード: ピボット: 値をバーで表すセルをクリックした時に、レイアウトが壊れる。
  • プロジェクト: Windowsでプロジェクトを開く時に、エラーコード 127でプロジェクトが開けないことがある。
  • プロジェクト: プロジェクトをエクスポートする際に、EPFファイルの名称にシングルクォートが含まれている場合、エラーがでてエクスポートに失敗する。

9.4

2024年1月22日リリース。

修正された問題

  • プロジェクト: Rがデフォルトとは異なるディレクトリにインストールされている場合、Rの検出に失敗し、プロジェクトを開くと空の画面が表示される。
  • プロジェクト: Rserveの起動に失敗したときに、わかりやすいエラーメッセージが表示されるようになり、Rパッケージを初期状態に戻すことができるようになりました。
  • 一般: MacからExploratoryデスクトップにログインしたときに、「Security returned a non-successful error code: 44」というエラーが表示される。

9.3

2024年1月16日リリース。

機能強化

  • データソース: Snowflake: 秘密キーファイルによる認証をサポートしました。
  • データラングリング: カテゴリを作成: 「ラベルの表示方法」のパラメーターを追加し「不等号の記号付き」の表示をサポートしました。
  • チャート: ヒートマップ: チャートの設定ダイアログの「値」タブから、小数桁数を設定できるようになりました。
  • ダッシュボード: 「全てのページに適用」のチェックボックスにチェックをつけて、パラメーターの変更をすべてのページに適用できるようになりました。
  • R: Rパッケージの管理から、インストールしたカスタムRパッケージを削除できるようになりました。

修正された問題

  • データソース: “quantmod”および”tidyquant”パッケージが不足しているため、株価データの更新に失敗する。
  • データラングリング: 計算を作成: 計算を作成のダイアログにて、「関数一覧」をクリックしても開かない。
  • データラングリング: データフレームの削除が機能しないことがある。
  • チャート: Bar: バー: 積み上げバーチャートに負のの値があるときに、合計値をチャートに表示したときの値が誤っている。
  • チャート: チャートの設定ダイアログの「軸」タブの「Y2軸」から日付のフォーマットを変更できるようになりました。
  • チャート: X軸に数値型の列を選択した際、一意な値の数が200以上だったときに数値をカテゴリに分けるようになりました。
  • チャート: 地図: 散布図: 「0を中央にする」オプションを「Yes」にすると、カラーパレットと実際の色が一致しない。
  • チャート: ピボットテーブル: データが存在しないレベルを持つFactor型の列を行に選択すると小計の位置がずれてしまう。
  • チャート: 散布図: ラベルで「値を表示」にチェックを付けた状態で、トレンドラインで「色のグループごと」を選択するとエラーになる。
  • チャート: 新規列を選択したときにのみ、一意な値のチェックのダイアログが表示されるようになりました。
  • ノート: ノートを複製して更新した後、更新された内容が元のノートに保存されてしまう。
  • ノート: ツールバーからキーボード・ショートカットのボタンをクリックしても、ダイアログが表示されない。
  • ノート: エクスポートのメニュー「ワード文書にエクスポート」が復活しました。
  • ノート: エクスポートされたワード文書にチャートが表示されない。地図とワードクラウドのチャートは、正常に機能しないことに注意が必要です。
  • ノート: Rコードでエラーがあった場合、エラーダイアログではなくプレビューにエラーを表示するべきです。
  • ノート: チャートを追加し、サイズを変更して「リフレッシュ」ボタンをクリックすると、チャートのサイズがリセットされる。
  • ノート: ノートの設定ダイアログで目次(TOC)関連のプロパティが復活しました。
  • ノート: URLリンクの挿入のダイアログを再度開いて別の場所にドラッグすると、不要なスクロールバーが表示される。
  • ダッシュボード: 「データの再インポート」のチェックボックスをオンに実行しても、ダッシュボード上のチャートが更新されない。
  • ダッシュボード: パラメーターの「自動実行」をチェックした後、パラメーターLOV項目を素早く選択すると「別のRプロセス」エラーが発生する。
  • ダッシュボード: パラメーターを変更した直後にダッシュボードを公開すると、ダッシュボードのレイアウトが壊れてしまう。
  • ダッシュボード: ダッシュボードに地図のチャートがある場合、一部のチャートのサムネイルのキャプチャに失敗してしまう。
  • ダッシュボード: ノート: 更新した際に、地図の位置とズームレベルを記憶するべきです。
  • ダッシュボード: テキストウィジェットに新しいノートエディターを使用するようになりました。
  • ダッシュボード: ダッシュボードを閉じて開いた後、以前のダッシュボードのインタラクティブフィルターが残ってしまう。
  • ダッシュボード: 編集モードでパブリッシュボタンをクリックすると、ダッシュボードの公開に失敗する。
  • パラメーター: フィルタのダイアログから「範囲内」の演算子を使用してDateまたはPOSIXct型のパラメーターを作成したときに、フィルタのダイアログ内でパラメーターのリストにそのパラメーターが表示されない。
  • プロジェクト: 新しいPCにレポジトリを移動した後に、開こうとしているプロジェクトで利用しているカスタムRパッケージが、そのPCにインストールされていないとプロジェクトを開けない。
  • プロジェクト: データフレームを追加した後にプロジェクトを閉じ、プロジェクトの一覧から追加したデータフレーム名を検索したときに、追加したデータフレームが表示されない。
  • プロジェクト: プロジェクトを閉じた後に、プロジェクト一覧の更新日の情報が更新されない。
  • プロジェクト: プロジェクトの一覧からプロジェクトをクリックすると、同じプロジェクトが2つのウィンドウで同時に開くことがある。

9.2

2023年12月26日リリース。

修正された問題

  • チャート:マップ - 標準:マップタイプが世界の国でエリアモードの時に、地図をクリックして詳細データを表示する機能が機能しない。
  • チャート:マップ - 標準:マップタイプをアメリカの州から世界の国に変更した際、地図をクリックして詳細データを表示する機能が動作しない。
  • プロジェクト:別ウィンドウでプロジェクトの名前を変更した後、プロジェクトリストはリフレッシュアイコンをクリックしなくてもすぐに変更を反映すべきです。
  • プロジェクト:別ウィンドウでプロジェクトを公開/非公開にした後、プロジェクトリストはリフレッシュアイコンをクリックしなくてもすぐに変更を反映すべきです。

9.1

2023年12月22日リリース。

修正された問題

  • データソース: WindowsにおけるUTF-8のサポートに問題があり、SQLのデータソースで日本語が文字化けする。
  • データラングリング: 複数のプロジェクトを開いているとき、チャート・ビューとテーブル・ビューの間を移動すると、“could not find function “というエラーが表示される。
  • チャート: 散布図(集計あり)で「ラベル」に列を選択した状態で、チャートタイプをバーに変更するとエラーになる。
  • チャート: ヒストグラム: 色で分割に日付列を選択し、「年と月」抽出をすると詳細を表示したときにエラーになる。
  • チャート: 地図: ロシアのサークルのマーカーがモスクワに表示されるようになりました。
  • チャート: 地図: 一部の国名がポップアップに表示されませんでした。
  • チャート: ナンバー: ピボットテーブル: 集計テーブル: テーブル: デフォルトのテキストの色を設定できるようになりました。
  • チャート: チャートのピンが設定されておらず、最後のステップが無効になっていると、パブリッシュしたチャートでパラメーターの更新に失敗する。
  • ノート: 過去のバージョンで作成されたノートを開けない。
  • ノート: ノートの本文の幅が、デスクトップとサーバーの間で異なる。
  • ダッシュボード: 列名に中括弧( { } )が含まれているとダッシュボードのフィルタが機能しない。
  • ダッシュボード: ピン留めされたステップに該当の列がチャートで利用されていなくても、その列が存在する限り、ダッシュボードのフィルタが機能するようになりました。
  • ダッシュボード: ダッシュボードを実行モードで閉じた後に再度開くと、空白のスクリーンが表示されました。
  • ダッシュボード: パイチャートをクリックすると、カラーパレットが変わってしまう。
  • プロジェクト: プロジェクト一覧からプロジェクト名を編集して、プロジェクトを開くと、プロジェクト名が変更されない。
  • プロジェクト: プロジェクト情報: プロジェクト作成直後に更新ボタンをクリックできない。

9.0

2023年12月14日リリース。

互換性のない修正

  • ノート: Wordへのエクスポートは一時的に無効になっています。

主な新機能

  • データリング: 列名を変更するときに、置換/取り除く/抽出の操作タイプのオプション利用できるようになりました
  • ナンバー: 2つの時点の指標を比較できるようになりました。
  • ダッシュボード: ダッシュボード内のチャートやピボットテーブルをクリックして、データをフィルタできるようになりました。
  • ノート: エディタを刷新しました。
  • プロジェクト: 複数のプロジェクトを別々のウィンドウで開くことができるようになりました。

機能強化

  • データソース: CSV: 日本語のCSVのファイルを読み込んだときに、エンコーディングの検知に失敗すると、エンコーディングにCP932またはShift JISを自動的に指定するようになりました。
  • パラメーター: フィルタのダイアログから新しいパラメータを作成すると、指定した演算子や列の情報などがパラメーターの設定ダイアログに引き継がれるようになりました。

修正された問題

  • データソース:Excel:複数のExcelシートをインポート&マージする際に、いくつかの列のチェックを外すと、「id」列が消えてしまう。
  • データソース:Googleシート:「curl::curl_fetch_memory()」でのエラーにより、データのインポートに失敗してしまう。場合によっては「HTTP2のフレーミングのレイヤーでエラーが発生する。
  • データソース:JSON:スキーマツリーで最後に選択したノードを記憶するべきです。
  • データソース:Salesforce:‘longtext’フィールド内のカンマ区切りの値が数値型として扱われていましたが、実際には文字型であるべきです。
  • データソース:SQLデータソースの更新が、「Cannot read properties of undefined (reading ‘get’)」のエラーで失敗する。
  • データラングリング:カテゴリを作成:範囲外の値のカテゴリのラベルに誤りがある。
  • データラングリング:Windowsで、カスタムRコマンドで長いスクリプトを使用するとエラーコード127で失敗する。
  • チャート:バーチャートで、色に数値列を割り当て、カテゴリ分けのタイプを変更し、色の列の選択を解除すると「Invalid argument was passed to returnsNumericValue」と表示される。
  • チャート:SQLデータのインポート中にチャートビューで操作ができない。
  • チャート:パイ / ドーナツ:設定ダイアログの値タブでフォントサイズを指定し、条件を「全て」から「範囲」に変更すると、フォントサイズの値がしきい値にコピーされる。
  • アナリティクス:ウィルコクソン検定のサマリタブと平均値タブで、信頼区間の値が異なる。
  • アナリティクス: Prophet:外部予測変数または繰り返しにシングルクォートの文字を含む列を割り当てると、「Error code 3」が表示される。
  • アナリティクス: アナリティクスビューでステップを更新してアナリティクスを実行した際、更新されたデータが反映されない。
  • 一般:Windows:全画面モードにすると画面がちらつくことがある。
  • パブリッシュ: チームとしてチャートをパブリッシュする際、「チームメンバーに通知」のオプションが機能しない。
  • プロジェクト:EPFファイルでプロジェクトをエクスポートした後、プロジェクトフォルダに一時的なデータファイルが残ってしまう。
  • 変更履歴:「新しいデータフレームとして保存」の操作で作成されたデータフレームを削除した後、変更履歴から復元することができない。

8.5

2023年12月6日リリース。

機能強化

  • アナリティクス: A/Bテスト:「カイ2乗 A/Bテスト(集計済みデータ)」と「検出力分析 - カイ2乗 A/Bテスト」をサポートいたしました。

8.4

2023年10月12日リリース。

修正された問題

  • データソース: S3: データソースのステップをクリックしても、関連づけられたコネクションが見つからない場合、データソースの更新ダイアログが開かない。
  • ダッシュボード: ダッシュボードがテキストインプットデータをデータソースとして使っている場合、Exploratoryサーバー上でスケジュールのボタンが無効化される。
  • パブリッシュ: 接続するExploratoryのサーバーを変更した後も、パブリッシュの際に変更が反映されない。

8.3

2023年10月6日リリース。

機能強化

  • チャート: パイ: 値のフォーマットを設定できるようになりました。
  • チャート: パイ: 「値を表示」で表示する値の条件を指定できるようになりました。
  • チャート: 「値を表示」で範囲タイプに「以上」または「以下」を使用して、表示する値の条件を作成できるようになりました。

修正された問題

  • データソース: プロキシサーバーを利用しているファイアウォール内でExploratoryデスクトップを利用しているときに、データカタログからデータをインポートできない。
  • データソース: CSV: データの区切り文字の自動検出に失敗したときに、区切り文字に自動的にカンマ(,)を利用するようになりました。
  • データソース: Presto/Treasure Data: エラーが発生しないようにSQLのクエリの最後のセミコロンを自動的に削除するようになりました。
  • データソース: Salesforce SQL: データソースのステップの「実行」ボタンをクリックしたときに、表示されるべきでない再認証のダイアログが表示される。
  • データソース: Webスクレイピング: データソースのステップを更新しても、サマリー・ビューとテーブル・ビューが更新されない。
  • データラングリング: 並び替え (ソート): すでに次のステップがあるときに「実行」ボタンが機能しない。
  • データラングリング: カテゴリを作成: 「範囲の端の扱い」に「下端の値を含む」を選択したときに、カテゴリ名に誤った不等号が使われている。
  • データラングリング: カテゴリを作成: カテゴリのタイプに「手動」を選択したときに、「ラベル」を設定すると、プレビューが空白になる。
  • サマリー: 行フィルタを削除するときの確認ダイアログに不要なHTMLタグが表示される。
  • チャート: 数値をカテゴリ化した時のバケットのラベルは、よりわかりやすい表現で表示する必要があります。例えば、「2000<=」ではなく、「2000以上」といった表記に変わります。
  • チャート: 色: 数値をカテゴリ化した際に、「等幅」を使ってバケットを作成した際に、バケット数を5より多く設定し、カラーパレットに「レッド / ブルー」を選択すると、5色のパレットが繰り返される。
  • チャート: 色: 数値をカテゴリ化した際に、「等幅」を使ってバケットを作成し、「0を中央にする」のオプションが適用されていると、指定されたデータ範囲を使用してバケットが作成され、パレットの中心の色が次のデータが次のデータが含まれるバケットと揃う必要がある。
  • チャート: ピボットテーブルで詳細データを表示しようとすると、エラーダイアログが表示され、“Cannot read properties of undefined (reading ‘name’)“のエラーが表示される。
  • チャート: 散布図: 繰り返しを使用し、スパースデータを含むY軸列をY2軸に設定すると”Cannot read properties of undefined (reading ‘0’)“のエラーが表示される。
  • チャート: 色で数値列をカテゴリ化した場合、「値の表示」の「チャートと同じ色」のオプションが機能しない。
  • アナリティクス: Prophet: 予測タブでチャートのデータを新しいデータフレームとして保存をしようとすると、 “Error code 127”のエラーが発生する。
  • アナリティクス: XGBoost: テストモードを適用した時に、予測マトリックスのパーセンテージの合計が100%にならない。
  • ノート: パラメーターを適用すると、プレビュー画面のスクロールバーが最上部まで移動し、現在の位置に留まる。
  • パラメーター: 別のデータフレームを参照するような動的なパラメーターを設定している場合、変更を加えたとしても、他の関連するパラメーターでその結果をもとにしたパラメーターの値に反映されない。
  • プロジェクト: セーフモード(ユーザーRパッケージ無し)でプロジェクトが開けない。
  • プロジェクト: プロジェクトをExploratoryサーバーにパブリッシュした時に、“ELOOP: too many symbolic links encountered error”といったエラーが発生することがある。

8.2

2023年9月15日リリース。

修正された問題

  • データラングリング: グループ化のステップを作成すると、“Cannot read properties of undefined (reading ‘name’)”のエラーが発生する。

8.1

2023年9月14日リリース。

機能強化

  • データソース: SQLデータインポートジョブ: プロジェクトを終了する時、またはアプリケーションを閉じる時に、インポートのジョブをキャンセルできるようになりました。
  • データソース: FRED: 複数のシリーズIDをコンマ(,)区切りで指定して、一度にインポートできるようになりました。
  • チャート: プロパティダイアログを開いた時に、前回閉じた時と同じ「タブ/サブタブ」が自動的に表示されるようになりました。
  • ダッシュボード: ダッシュボードのプロパティのダイアログから、ナンバーチャートのフォントサイズの自動調整を「有効/無効」に設定できるようになりました。

修正された問題

  • データソース: SQLのデータをインポートした後、「別のRのプロセスとのコンフリクトがありました。」といったエラーが表示される。
  • データラングリング: フィルター: 演算子の名前を改善しました。
  • データラングリング: 条件を設定して置換: 条件に選択された列を選んだ際に、トークンでは内部的に持つ”Selected Columns”が表示される。
  • データラングリング: テキストデータの加工: 区切り文字に選択できるクエスチョンマーク(?)が機能しない。
  • サマリビュー: サマリビューからチャートを作成した時のデフォルトの色を、水色ではなくデフォルトの青色に変更しました。
  • チャート: 繰り返しに列を割り当て、X軸を同期のチェックボックスをオフにすると、「X/Y軸に常に0を含める」のオプションが機能しない。
  • チャート: 軸の設定にある「数字の短縮化 (K, M などを使う)」の説明が明確ではなかったため修正しました。
  • チャート: パイ: フォントサイズの変更が機能しない。
  • チャート: プロパティのダイアログを一番下に移動してタブを切り替えると、ダイアログの下部が見切れてしまう。
  • チャート: X軸に日付列を設定し、小数点以下を明示的に指定すると「.2f」のように予期しない文字列がX軸に表示される。
  • アナリティクス: アナリティクスでフィルターを新規作成、または更新できない。
  • ノート: プロパティから「目次を常に表示する」を無効化した時に、目次のスタイルに一貫性がない。
  • ダッシュボード: ページを複製した後、全てのコンテンツが表示されない。
  • ダッシュボード: 高さが非常に短い行にナンバーチャートを挿入した場合、サムネイルはプレビューした際の表示よりも小さくなってしまう。
  • ダッシュボード: ナンバー用の行にナンバーチャートを追加した際に、サムネイルが非常に小さく見える。
  • ダッシュボード: アナリティクスを含むダッシュボードを実行すると、元になるアナリティクスの変更がなかったとしても、常に変更履歴に記録される。
  • パブリッシュ: データの共有: タイトルに英語のテキストを含むデータをパブリッシュした場合、そのテキストはURLの一部として使用されるはずが機能しない。
  • パブリッシュ: メタデータのファイルに必要なパラメーターの一部が欠落している場合、ソースステップからのパブリッシュが機能しない。
  • プロジェクト: パブリッシュの確認ダイアログにある「プロジェクトを閉じる」ボタンを押した後、動作が遅くなる。
  • プロジェクト: プロジェクトリストからプロジェクトを選択した際に、別のプロジェクトが開いてしまう。
  • 変更履歴: プロジェクトをコピーした後、変更履歴には空のエントリと復元に使用できない「Modified project.json」というメッセージが表示される。
  • 変更履歴: gitの作業のブランチ名がmaster以外の場合、変更履歴からの復元が機能しない。

8.0

2023年9月4日リリース。

互換性のない修正

  • データラングリング: カテゴリを作成: カテゴリを作成時のアウトプットのフォーマットが、チャートでのカテゴリ作成と一致するように変更されました。

主な新機能

  • データソース: SQLデータのインポートがバックグラウンドプロセスとして実行されるようになったため、Exploratoryの他の操作ができるようになりました。
  • データラングリング: ステップのポップアップのテキストの可読性を改善し、処理内容をより簡単に理解できるようになりました。
  • チャート: 設定ダイアログのデザインを刷新したことによって、劇的にチャートが使いやすくなりました。
  • アナリティクス: ANCOVA(共分散分析)と対応分析をサポートしました。
  • パブリッシュ: インサイトのパブリッシュがバックグラウンドプロセスとして実行されるようになり、パブリッシュ中に他の操作ができるようになりました。
  • やり直し、復元、バージョン管理: 変更履歴から過去に遡ってどの時点の状態でも簡単に復元できるようになりました。
  • コラボレーション: 共有されたプロジェクトで作業中に、他の誰が同じプロジェクトを編集しているかをリアルタイプで確認できるようになりました。

機能強化

  • データソース: SQL: 複数のコネクションがあるときに前回使用したコネクションがデフォルトで選ばれているようになりました。
  • データラングリング: 欠損値の加工: 今日および特定の日付で埋めるオプションをサポートしました。
  • データラングリング: フィルタ: データ上の最後の日からNヶ月/週/日のフィルタをサポートしました。
  • データラングリング: 結合: 結合先データフレームの欠損値を除外するオプションをサポートしました。
  • データラングリング: 指定した行を列名にする: すべての列のデータ型を再評価するパラメーターをサポートしました。
  • データラングリング: マージ: エラーが起きた際、どのデータフレームで問題が起きているのかがエラーメッセージに表示されるようになりました。
  • データラングリング: カテゴリを作成: 区切り値の小数の桁数を指定できるようになりました。
  • チャート: 軸の色と太さを指定できるようになりました。
  • チャート: Y軸に複数の列を選択したときに、値を表示する列を選択できるようになりました。
  • チャート: 表示する値を、条件によって指定できるようになりました。例えば、ハイライトした値、値の範囲、最小/最大/最初/最後の値、などの指定が可能です。
  • チャート: バー: エリア: バー・チャートタイプに積み上げを選択したときや、エリアチャートで「色で分割」に列を選択したときに、合計値を表示できるようになりました。
  • チャート: 値をマーカーと同じ色で表示できるようになりました。
  • チャート: Date(日付)/POSIXct(日付時間)型の列から”年と月”を抽出できるようになりました。
  • チャート: 軸の設定ダイアログから、“yyyy/mm” および “yy/mm” の日付書式を利用できるようになりました。
  • チャート: 軸のラベルの角度を設定できるようになりました。
  • チャート: 軸の設定から、軸の桁区切りの設定が可能になりました。
  • チャート: バー: 「色で分割」に列を選択したときに、並び替えの設定から、「最初のカテゴリで並び替え」ができるようになりました。
  • チャート: ハイライト: 元の凡例の順序を維持できるようになりました。
  • チャート: ヒストグラム: 密度曲線: 箱ヒゲ図: バイオリン図: 地図(標準, 拡張, 緯度/経度): ヒートマップ: ヒートマップ: 等高線プロット: 数値のフォーマットをサポートしました。
  • チャート: 地図: UIのロケールが日本語のときに、地図が日本語で表示されるようになりました。
  • チャート: パイ: 値の表示を設定するときに値と割合(%)に異なる小数点以下の桁数を指定できるようになりました。
  • チャート: ピボットテーブル: 列のフォーマットの設定からタイトルを非表示にできるようになりました。
  • チャート: ピボットテーブル: 列のフォーマットの設定から「グループヘッダーの位置」メニューを変更して、ヘッダーのテキストの位置を設定できるようになりました。
  • チャート: ピボットテーブル: 集計テーブル: 「全ての列に適用」オプションを使用して、全ての列に行のカラー・フォーマットを適用できるようになりました。
  • チャート: ピボットテーブル: 集計テーブル: 「行のフォーマット」の並べ替えメニューから、並び替えの優先順位を設定できるようになりました。
  • チャート: 設定ダイアログをドラッグ・アンド・ドロップで移動できるようになりました。
  • アナリティクス: 多重共線性タブで分散拡大係数(VIF)で10を超える変数は、赤で表示されるようになりました。
  • アナリティクス: K-Means クラスタリング: 「データの前処理」に「変数を標準化する」が「FALSE」に設定されている場合、箱ヒゲ図とレーダーチャートは元の値を表示するようになりました。
  • ダッシュボード: 行の高さを以前に比べさらに小さく設定できるようになりました。
  • 一般: キャンセルしたとき、セッション全体をシャットダウンすることなく、実行中のプロセスのみがキャンセルされるようになりました。これによって、キャンセルの処理が劇的に速くなります。

修正された問題

  • データソース: Azure Synapse: Azure Synapseに対してクエリを実行すると、一部の行がインポートされない。
  • データソース: ODBC(Legacy): MS SQL Serverに対してクエリを実行すると、一部の行がインポートされない。
  • データソース: Google Analytics: プロパティをGA3からGA4に変更後、実行ボタンをクリックするとプロパティの設定が消えてしまう。
  • データソース: Salesforce SQL: クエリが無効な場合、SQLの構文エラーが返されるはずが、接続エラーが返ってしまう。
  • データソース: データソースをParquetからExcelファイルに切り替えると、シート名を含む不要なID列が追加される。
  • データラングリング: 重複行の保持: 列選択用の複数選択のウィジェットを組み込むことで使いやすさが向上しました。
  • データラングリング: マージ: エラーメッセージに問題の原因となるデータフレーム名を表示するようにメッセージを改善しました。
  • チャート: 繰り返しを使用し、「X軸を同期」のチェックボックスをオフにすると、「X/Y軸で0軸に含める」のオプションが機能しない。
  • チャート: バー: ライン: Y軸に1つの列のみを割り当てた際に、列名を編集できるようになりました。
  • チャート: 箱ヒゲ図: 繰り返しを使用した際に、下部に不必要な余白が表示される。
  • チャート: 一部の条件で”Invalid argument was passed to returnsNumericValue: “col is empty.”のエラーによって、散布図(集計あり)の描画に失敗する。
  • チャート: サマリビューからチャートを作成して更新をすると、色の割り当てがおかしくなってしまう。
  • チャート: 箱ヒゲ図: ヴァイオリン図: マウスオーバーした時のポップアップで、小数の桁数のフォーマットが機能しない。
  • チャート: ヒートマップ: 使用されていない場合でも全てのFactor型のレベルを表示する必要があります。
  • チャート: ハイライト: 複数のカテゴリに同じ色を割り当てた場合、凡例の順序が正しくありませんでした。
  • チャート: ライン: Y軸、色、繰り返しに列を割り当て、「X軸を同期」のオプションのチェックを外した場合、ラインチャートの描画に失敗する。
  • チャート: ピボット: 値の数値列にカテゴリ型のパレットを割り当てると、色の割り当てが正しくありませんでした。
  • チャート: テーブル: 既存のテーブルに新しい列を追加すると、列の順序が乱れてしまう。
  • チャート: テーブル:テーブルで使用されている列の名前を変更、または削除した場合、URLリンクのターゲット列が変更されてしまう。
  • チャート: 色に列を割り当てて、表計算のグループ化に「全体」を設定すると、「前の値の差の割合」が期待通りの結果を返さない。
  • アナリティクス: クラスカルウォリス検定: 説明変数に数値列を割り当てた場合、多重比較タブのグループにてバケットの表記に誤りがある。
  • ノート: 編集画面とプレビュー画面でスクロールした時の位置の同期が改善されました。
  • プロジェクト: プロジェクトリストで検索をした際に、すでに削除されたはずのアイテムがマッチしたと表示されることがある。
  • プロジェクト: プロジェクトの数が多い場合でも、プロジェクトリスト画面が素早く表示されるようパフォーマンスを改善しました。

7.2

2023年6月24日リリース。

機能強化

  • データソース: Snowflake: データ接続時のロールのパラメーターをサポートしました。
  • データラングリング: マージ(行結合): 「列のインデックス番号を列名にする」機能をサポートしました。

修正された問題

  • データソース: Excel: 名前が数字で始まるシートを選択すると、Excelファイル内の他のシートがインポートされる。
  • データソース: Excel: フォルダ内にExcelを開いた状態の時に生成される一時的なファイルが存在する場合、インポート&マージでエラーが発生する。
  • データソース: ローカルファイル: インポート&マージで検索条件の「…で始まる」が機能しない。
  • チャート: バー: 表計算で「割合(% of)」を使用したバーチャートでは、一部の条件下でソートが機能しない。
  • アナリティクス:カイ2乗検定: サマリタブに「Cohen’s W」の指標を表示するように変更しました。
  • アナリティクス: t検定: プロパティのファイアログの一部のセクションが日本語に訳されていない。
  • アナリティクス: t検定: サマリタブでタイプ2エラーの列ヘッダに日本語に訳されていない。
  • ダッシュボード: ノート: パブリッシュされたダッシュボードやノートのチャートにて、チャートデータのエクスポートを実行してもデータのダウンロードが開始されない。
  • プロジェクト: プロジェクトのフォルダに不要な一時的なファイルがある場合、プロジェクトのエクスポートが機能しない。

7.1

2023年6月12日リリース。

互換性のない修正

  • データソース: Twitterのデータソースが廃止されました。

機能強化

  • インストール: 必要なRのコアパッケージの読み込みが失敗した場合、Rのコアパッケージをリセットできるダイアログが表示されるようになりました。

修正された問題

  • データソース: シート名が数値のみの場合、“Can’t retrieve sheet in position”のエラーが発生してインポートできない。
  • データソース: Windows: ファイル名またはフォルダ名にNon-ASCII文字が含まれている場合、インポート&マージのオプションが機能しない。
  • サマリビュー: 相関モード: 列数が100を超える場合、ソートを使用すると空白の画面が表示される。
  • サマリビュー: 相関モード: 文字列型の列で値に長いテキストデータがある場合、チャート上のポップアップがオーバーフローする。
  • データラングリング: 条件を設定して置換: ダイアログの中で「ファクター型として順序を保持する」にチェックをつけ、新しい値のデータ型を数値に変更すると、結果に予期しないNA(欠損値)が表示される。
  • データラングリング: パラメーターに親子関係がある場合、値の選択時に「選択なし」のみが必要されるはずが、子パラメーターに利用可能なすべての値が指定されてしまう。
  • チャート: ユーザーカラーパレットがまだ作成されていない場合、「カラーパレットの追加/編集」のメニューが表示されない。
  • チャート: カラーパレット: バーチャートの色に数値列を割り当て、タイプに「離散値」を選択した場合、デフォルトのカラーパレットが適用されない。
  • チャート: その他グループ: その他のオプションで「含む値を任意に選ぶ」を使って値を何も選択せずに適用すると、エラーダイアログが表示される。
  • チャート: ピボット: 集計テーブル: ヘッダーに関数名を表示する設定にして列の幅を変更すると、関数名の表示が消えてしまう。
  • チャート: 値をパーセンテージで表示した場合、値をプロット上に表示する際の「この値より大きい場合のみ表示」のオプションはパーセンテージではなく比率の値で指定する必要があります。
  • チャート: ピボット: 集計テーブル: 値をパーセントで表示した場合、条件付きカラー書式設定の条件の値はパーセンテージではなく比率の値で指定する必要があります。
  • チャート: ピボット: 集計テーブル: 数値型以外の列で一意な値の数などの数値を返す場合は、合計に集計後データを使用すると追加の合計にも「平均値」などの集計関数を使用できる必要があります。
  • ノート: エディタでエスケープキーを押すと、「画面分割モード」から「シングル・ビュー・モード」に変更され、レイアウトが破損する。
  • 一般: レポジトリに無効な接続ファイルがあると、Exploratory デスクトップが起動せずにハングする。

7.0

2023年5月22日リリース。

互換性のない修正

  • アナリティクス: R4.3においてベースパッケージがサポート外となったため、時系列異常値検知はサポート対象外となりました。
  • アナリティクス: 線形回帰、ロジスティック回帰、コックス回帰、一般化線形回帰の「係数(有意)」タブは廃止されました。 「係数」タブを代わりにご利用ください。

新機能

  • サマリビュー: 指標をクリックすると、その指標の説明が表示されるようになりました。
  • データソース: 「データベース」でOracleをサポートしました。
  • データソース: 「気象データ」と「株価データ」を「エクステンション」から「クラウドアプリケーション」に移動しました。
  • データラングリング: 結合: 条件を元にしたデータフレームの結合をサポートしました。
  • データラングリング: フィルタ: フィルタのタイプに「列」を追加しました。
  • チャート: 「システム設定」のダイアログから、フォントサイズ、カラーパレットなどのデフォルトの書式設定を変更できるようになりました。
  • チャート: ヘルプリンクをクリックすると、日本語のドキュメントが表示されるようになりました。
  • アナリティクス: t検定とカイ二乗検定の検出力分析ができるようになりました。
  • アナリティクス: サマリータブで指標をクリックすると、その指標の説明が表示されるようになりました。
  • アナリティクス: ヘルプリンクをクリックすると日本語のドキュメントが表示されるようになりました。
  • ノート: ダッシュボード: YouTube、Tweet、Rumbleを 「+」ボタンから追加できるようになりました。
  • ノート: ダッシュボード: 左側のカタログツリーから、ノートまたはダッシュボードを「名前」または「更新日」を元にソートできるようになりました。
  • プロジェクト: コラボレーション: プロジェクトをパブリッシュしたときや、サーバーにパブリッシュされているインサイトをインポートするときに、変更内容が表示されるようになりました。
  • プロジェクト: コラボレーション: パブリッシュされたプロジェクトを直接インポートできるようになりました。

機能強化

  • サマリビュー: サマリービューからチャートを作成したときに利用されるデフォルトの色が「ライトブルー」になりました。
  • サマリビュー: 相関モードで予測オプションを有効にしてチャートを作成すると、トレンドラインが表示されたチャートが作成されます。
  • サマリビュー: Character(文字列)型またはFactor(順序付きカテゴリ)型の列から、チャートを作成した場合、「向き」が「横」のバーチャートが作成されるようになりました。
  • データソース: データカタログ:「自分のデータ」、「チームのデータ」、「共有されたデータ」に分けてデータを検索できるようになりました。
  • データソース: コラボレーション・サーバー用にMS SQL Server ODBC Driverを設定できるようになりました。
  • データラングリング: Google Sheetsへのエクスポート: 「既存を上書き」を選択したときに、「シートを新規作成」と「既存のシートに追加」オプションを選択できるようになりました。
  • データラングリング: 元の値を新しい値で置き換える: 新しい値に変換するときにFactor型に変換できるようになりました。
  • データラングリング: 元の値を新しい値で置き換える: 新しい値に変換するときのデータ型の自動検出をサポートしました。
  • データラングリング: 表計算: 「計算前にデータをソートする」オプションを追加しました。
  • データラングリング: 集計: 条件付きの割合の集計において、パーセンテージ表記をサポートしました。
  • チャート: ピボットテーブル: 集計テーブル: 複数の列の合計を集計できるようになりました。
  • チャート: レーダー:プロットエリアに値を表示できるようになりました。また、軸のステップ幅、グリッド線のスタイル、マーカーのサークルの大きさ、線の太さやスタイル、塗りつぶしの不透明度を変更できるようになりました。
  • チャート: レーダー:チャート上にレファレンスラインを表示できるようになりました。
  • アナリティクス: Prophet: サマリータブにR2乗値が表示されるようになりました。
  • アナリティクス: アナリティクスのチャートのカラーパレットでユーザーパレットを使用できるようになりました。
  • アナリティクス: ウィルコクソン検定とクラスカル・ウォリス検定に「確率分布」のタブを追加しました。
  • アナリティクス: クラスカル・ウォリス検定の多重比較の手法において、Dunn検定をサポートしました。
  • ノート: ピボットテーブル、集計テーブル、テーブルにおいて、「border=“none”」属性を指定することで、境界線を非表示にすることができるようになりました。
  • ノート: スペルチェッカー: スペルチェックの誤検知を最小限に抑えるために辞書を更新しました。
  • ダッシュボード: ノート: チャートの「列の数」設定を変更した場合、その設定を記憶するようにしました。
  • パラメーター: ロジカル型のデータにおいて、入力タイプのスタイルに「ラジオボタン」と「チェックボックス」を追加しました。
  • パラメーター: 値のリスト(単一選択): 「値の指定がない場合は全選択とする」オプションをサポートしました。
  • パラメーター: 値のリスト(複数選択): 「値の指定がない場合は全選択とする」オプションを有効にしたときに、「全ての値を返す」あるいは「空の値を返す」オプションを追加しました。
  • パラメーター: パラメーターの複製をサポートしました。
  • パラメーター: ノート/ダッシュボードと、他のアイテム(チャート/分析/ステップ)の間で、最後に選択したパラメーターの値が同期されるようになりました。

修正された問題

  • データソース: Excel: インポート&マージにて、Excelファイル内の別のシートを選択しても、最初のシートが選択される。
  • データソース: Excel: 複数のシートのインポート&マージをしたデータで、データソースを切り替えると、シートの選択が正しく機能しない。
  • データソース: エクスポートしたJSONファイルは、ユーザーフレンドリーなフォーマットになっている必要があります。
  • サマリビュー: カスタムRスクリプトを使用したステップでデータを返さない場合、サマリビューをクリックするとエラーレポートのダイアログが表示される。
  • テーブルビュー: 特殊文字の含む列で「グループ化」されている場合、テーブルのヘッダにある「i」アイコンをクリックしても列の情報を取得できない。
  • データラングリング: 左側にあるサイドバーでスクリプトを選択した時に、集計などのダイアログが自動的に閉じない。
  • データラングリング: 条件を設定して置換: 対象となる列が整数(Integer)型の列だった場合、その列を新しい値として返すデフォルトの列として指定できない。
  • データラングリング: ステップメニューにある「Rコマンドへ変換」が機能しない。
  • データラングリング: 複数の列に基づいて計算を作成をした際に、既存のステップにトークンが追加されましたが、新しいステップとして作成する必要がありました。
  • データラングリング: データのインポート後にソースステップのコネクションを選択するとエラーが発生する。
  • データラングリング: 元の値を新しい値で置換: 元の値が「.」になっているものを新しい値に置換をした場合、他の操作でエラーが発生する。
  • チャート: 数値のカテゴリ化で等間隔の間隔に負の数値を入力するとエラーダイアログが表示される。
  • チャート: テーブルの列選択ダイアログにて、使用できない列を削除できず、ダイアログを閉じる時にエラーが表示される。
  • チャート: ユーザーカラーパレット: 16進数カラーコードの入力フィールドをクリックすると、カラーピッカーのダイアログが閉じてしまう。
  • チャート: 色、グループ、並び順の設定: グループ分けのタイプで論理条件を使用した際に、論理条件式が長すぎるとダイアログがオーバーフローする。
  • チャート: 表示名の編集: 元の値が「.」になっているものを新しい表示名に変更した場合、他の操作でエラーが発生する。
  • チャート: 散布図: 繰り返しに列を割り当て、X軸を同期のチェックボックスをオフにすると、プロット領域のラベルが実際のデータと一致しない。
  • チャート: ピボット: 集計テーブル: 小数点以下の桁数の設定が、「<0.63」などのカテゴリ化したラベルの数値に適用されない。
  • ダッシュボード: ダッシュボードに1行しかない場合、チャートをドラッグ&ドロップで行の中を移動することができない。
  • ダッシュボード: 列レイアウトでチャートをドラッグ&ドロップした場合、ドロップされたチャートを選択できない。
  • ダッシュボード: ノート: 別ウィンドウで開いている時に、サイドバーからノートやダッシュボードをフォルダの中に格納すると、それらを閉じた時にフォルダの外に移動してしまう。
  • ダッシュボード: ノート: スペルチェッカーがデフォルトで「オン」になるように変更されました。
  • パラメーター: パラメーターを含むインサイトをパブリッシュした際に、パラメーターの値が正しくセットされない。
  • 一般: Exploratory デスクトップを起動した時に、一時的なディレクトリがクリーンアップされるようになりました。

6.12.5

2023年3月7日リリース。

機能強化

  • データソース: Oracle: システム設定のデータベースタブから、Oracleデータベース用のエンコーディング (NLS_LANG)を設定して、マルチバイトの文字に対応できるようになりました。

修正された問題

  • データラングリング: データフレーム名をリネームした後に、サマリビューから列のフィルタの設定を変更すると、追加したステップが消えてしまうことがありました。
  • データラングリング: ステップを選択した直後に別のステップに移動すると、ステップ内のトークンが別のステップのトークンに上書きされてしまう。
  • データラングリング: 日付/日付時間型の列から「曜日」を「抽出」したときに、新しい列名が「元の列名_wday」ではなく、「calculation_1」として表示される。
  • チャート: X軸に数値列を選択しカテゴリを適用したときに、X軸のラベルの小数点以下の値が6桁以上の場合、小数点以下の6桁と7桁目の間に不要な「.」が表示される。
  • 一般: git-secretsがPCに適切にインストールされていないと、プロジェクトの新規作成時にエラーが発生する。

6.12.4

2023年2月20日リリース。

機能強化

  • チャート: チャートのプロパティダイアログから、値をプロット上に表示したときの「フォントサイズの自動調整」をオフにできるようになりました。

修正された問題

  • データラングリング: 計算を作成: 列ヘッダメニューから新しく計算を作成する場合、既存のステップへのトークンの追加ではなく、新しいステップとして作成されます。
  • ノート: 関連のあるメタデータファイルが破損、または削除されたためにノートが開けなくなった時に表示されるエラーメッセージを改善しました。
  • エクスポート: プロジェクトの中に長いパス名、またはファイル名が含まれている場合、ネットワークドライブ上のリポジトリからプロジェクトをエクスポートすると、xcopyから “Command failed”のエラーが表示される。

6.12.3

2023年2月16日リリース。

機能強化

  • データソース: PostgreSQL/Redshift: SSLモードをサポートしました。
  • チャート: バー: 「値をプロット上に表示」を設定したときに文字が重ならないように改善しました。
  • チャート: バー: チャート上に値を表示したときの値の表示角度を設定できるようになりました。
  • チャート: ピボットテーブル: 集計テーブル: テーブル: NAのときのデフォルトのテキストを変更できるようになりました。
  • チャート: ピボットテーブル: 集計テーブル: 「クイック表計算」メニューを追加しました。
  • チャート: 凡例のタイトルのテキストのフォントスタイルを変更できるようになりました。
  • データラングリング: 列ヘッダーメニュー: Factor型の列をNumeric型の列に変換するときの関数を「as.numeric」に変更し、順序のレベルが数値に変換されるようになりました。
  • アナリティクス: 分散分析(ANOVA)のサマリータブの表示方法を改善し、「グループ間」と「グループ内」の行が表示されるようになりました。

修正された問題

  • データソース: CSV: ファイルリスト: .DS_Store のような隠しフォルダが表示されなくなりました。
  • データソース: CSV: データの区切り文字の自動検出に失敗したときに、「データの区切り文字」の設定フィールドを赤色で強調するようにしました。
  • データソース: Excel: 複数のExcelファイルを選択した状態でシート名の更新アイコンをクリックしても、正常に動作しないことがありました。
  • データソース: Excel: 複数シート: シートの検索フィールドに値を入力できない。
  • データソース: Excel: インポートダイアログで列の選択を外したときに、列のデータ型の設定が正しく引き継がれない。
  • データソース: Google Analytics: 1つのアカウントにGA4とUAの両方のプロファイルがある場合、“http_403 User does not have sufficient permissions for this profile”というエラーが発生し、データをインポートできない。
  • データソース: Google ドライブ: Excel: インポートダイアログにシートのリストが表示されず、ファイルをインポートできない。
  • データソース: マルチバイトの文字を含むフォルダにExcelのファイルがあるときに、そのフォルダにファイルが存在しないことを表すエラーが表示される。
  • データソース: SQLのインポートダイアログ: スキーマのパネルに表示されるテーブルとビューが多すぎると、Exploratory がクラッシュする。
  • データラングリング: ブランチのデータフレーム名を変更すると、ブランチを派生したステップに変更前のブランチのデータフレーム名が表示されてしまう。
  • データラングリング: カテゴリを作成: 範囲の端の扱いのデフォルトを「下端の値を含む」に変更しました。
  • データラングリング: ダイアログのプレビューにテーブルの列数が表示されるようになります。
  • データラングリング: ロング型からワイド型へ: キー列と値の列が選択されている場合、ダイアログを開くとデフォルトでプレビューが表示されるようになります。
  • データラングリング: 計算を作成: ステップに「新規作成」のボタンが表示されない。
  • データラングリング: 条件を設定して置換: リセットボタンを押しても元の状態に復元されない。
  • データラングリング: 列を選択: 列の選択、または削除の時に列の順序が保持されるようになります。
  • データラングリング: 「列の選択」と「列の並び替え」のダイアログに「リセット」ボタンがサポートされます。
  • データラングリング: ブランチを他のステップにドラッグ&ドロップで移動できることをより簡単に理解できるように、ブランチのルートアイコンを更新しました。
  • サマリビュー: 行フィルター: 列のデータタイプが文字列(Character)型にして「等しい」の条件を追加した際に、値のドロップダウンをクリックすると値のリストが表示されない、またはダイアログが閉じてしまう。
  • サマリビュー行フィルター: 2つ目の条件を作成した場合、最初の条件で選択された値が残ってしまう。
  • チャート: 密度曲線: 値がすべて欠損値の列を割り当てた場合、レンダリングに失敗してエラーが表示される。
  • チャート: ピボットテーブル: 集計テーブル: Sum_if関数(または同様の関数)を利用して条件列を別の列に変更すると、チャートのコントロールエリアが空白になる。
  • チャート: ピボットテーブル: 集計テーブル: 時系列での表計算は、日付列が行(グループ化)の最も細かいレベルで設定されている場合にのみ表示されるようになります。
  • チャート: 「Y1軸とY2軸を0で同期する」のオプションはデフォルトでチェックされるようになります。
  • チャート: 範囲の端の扱いのデフォルトを「下端の値を含む」に変更しました。
  • チャート: 凡例の位置を右から上に変更すると、Y2軸の目盛りが大きくなってしまう。
  • アナリティクス: t検定: ウィルコクソン検定: 説明変数にロジカル型の列を割り当てて実行した時のベースレベルがTRUEとなっていました。この動作を変更し、FALSEをベースレベルにすることで、より直感的に理解がしやすくなります。
  • ノート / ダッシュボード: チャートの選択ダイアログ: データフレームの表示順が正しく並べられていない。
  • プロジェクト: プロジェクトを複製した時に、複製されたプロジェクトがリストの一番上に表示されるようになります。

6.12.2

2023年1月24日リリース。

機能強化

  • データラングリング: UIのロケールが日本語の場合、関数リファレンスが日本語で表示するようになりました。
  • チャート: バー: プロパティから「バー同士の間隔をあける」ことができるようになりました。

修正された問題

  • データソース: Excel: 複数のシートをインポートするときの挙動を改善いたしました。
  • データソース: インポート済みのExcelのデータソースを開くと、「TypeError.Cannot read properties of undefined (reading ‘length’) 」というエラーが出る。
  • データソース: Salesforce: 「一括クエリを使用する」のチェックボックスがチェックされているときに、SOQL内に改行があると、不正なオブジェクトの権限エラーが表示されました。
  • データソース: Presto / Treasure Data: v6.12.0にアップグレードすると、BIG INT型のデータが整数値として扱われてしまう。
  • データ・ラングリング: テキストデータの加工: 「操作タイプ」に合わせて、「指定した文字」に関するメニューのテキストをアップデートしました。
  • データ・ラングリング: テキストデータの加工: 「指定した文字」にプリセット以外の文字を選択するときのカスタムメニューを分かりやすい名称に変更しました。
  • サマリビュー: 文字列型のデータのヒストグラムで「Other」として表示されていたカテゴリの名称が「その他」として表示されるようになりました。
  • チャート: バー: 各カテゴリが1行しかないデータを使って、カテゴリ型の列を「X軸」と「色(グループ化)」に選択して、さらにY軸に数値型の列を選択し、集計関数を標準偏差に設定した状態で、「色(グループ)化」において表示する値の制限に「上位」を選択すると、「forcats::fct_reorder(): ! Arguments in … must be used.」というエラーが表示される。
  • 一般: 特定の条件下でブランチを削除すると、「dagops.members: dataframe does not exist in the catalog」というメッセージのエラーレポートダイアログが表示される。
  • 一般: WindowsからExploratoryを起動したときに「 Failed to validate the installed R packages」というエラーが表示され続ける。
  • インストール: ユーザープロファイルのメタデータのファイルが壊れていると、Exploratory デスクトップを起動できない。
  • プロジェクト: プロジェクトの更新中に、プロジェクト同期ボタンを複数回クリックできなくなりました。

6.12.1

2023年1月14日リリース。

修正された問題

  • データソース: Mac で6.12.0 にアップグレードすると、MariaDB / MySQL からのデータインポートに失敗する。
  • データソース: Twitter : screen_name 列がデータに含まれない。
  • テーブルビュー: テーブルビューを開いた後にプロジェクトを閉じ、再び同じプロジェクトの同じデータフレームを選択し、新しい行フィルタを作成すると、行フィルタが適用されない。
  • テーブルビュー: サマリのポップアップ内の標準偏差が常にNAとして表示される。
  • プロジェクト:Mac で6.12.0 にアップグレードすると、プロジェクトの情報アイコンをクリックしても反応しない。

6.12.0

2023年1月12日リリース。

機能強化

  • アナリティクス: 因子分析: 「回転のタイプ」に斜交タイプのものを選択すると、因子間相関が表示されるようになりました。
  • アナリティクス: K-means クラスタリング: 各クラスターの特徴量の分布を密度曲線で表現する分布タブが追加されました。
  • アナリティクス: 新しいアナリティクスのタイプとして、集計済みデータを使ったt検定を追加しました。
  • アナリティクス: 新しいアナリティクスのタイプとして、単語化済みデータを使ったトピックモデルを追加しました。
  • チャート: 凡例にタイトルを追加できるようになりました。
  • チャート: Y軸メニューの「Y1/Y2軸の指定」から、Y1軸とY2軸を0で同期することができるようになりました。
  • チャート: hms型のデータを数値として扱えるようになりました。
  • チャート: ナンバー: 「フォーマット」から条件によって色を割り当てられるようになりました。
  • チャート: パイ: 値のメニューの「列名の変更」からチャート内の中央のテキストを編集できるようになりました。
  • チャート: ピボットテーブル: 集計テーブル: フォーマットから色の割り当てに「条件付き」を選択したときに、条件に応じてバーに色を割り当てられるようになりました。
  • チャート: ピボットテーブル: 集計テーブル: フォーマットから「すべての列に適用」のオプションを使って、全ての列のテキストに一度に色を適用できるようになりました。
  • チャート: ピボットテーブル: 集計テーブル: 小計や合計値をクリックして、詳細データを表示できるようになりました。
  • チャート: レーダー: 「色、グループ、並び順の設定」ダイアログで、凡例の色の方向を設定できるようになりました。
  • チャート: トレンドライン: 線形回帰のプロット領域に、トレンドラインの指標(R2乗値と係数)を表示できるようになりました。
  • ダッシュボード: 編集時にドラッグ&ドロップで行や列全体を並び替えられるようになりました。
  • データソース: Excel: 複数のシートを別々のデータフレームとしてインポートするか、1つのデータフレームとしてマージしてインポートできるようになりました。
  • データソース: JSONファイルをドラッグ&ドロップでインポートできるようになりました。
  • データソース: データソースとしてGCS(Google Cloud Storage)をサポートしました。
  • 一般: Windowsにおいて、設定を変更することなくUTF-8をサポートできるようになりました。
  • データラングリング: 条件を設定して置換、カテゴリを作成、テキストデータの加工: 選択した列の直後に新しい列が作成されるようになりました。
  • データラングリング: 結合: プレビュー内のテーブルのヘッダーにNA(欠損値)のバーが表示されるようになりました。
  • データラングリング: 計算を作成: 新しく作成した列が、サマリービューとテーブルビューでハイライトされるようになりました。
  • データラングリング: 列の並び替え: 複数の列を一度に先頭あるいは最後に移せるようになりました。
  • データラングリング: 列の並び替え: 複数の列をドラッグ&ドロップで一度に並び替えられるようになりました
  • データラングリング: 集計: hms型の列で平均値や合計値などの集計関数をサポートしました。
  • データラングリング: テキストデータの加工: URLのエンコードとデコードをサポートしました。
  • プロジェクト: プロジェクトファイル(epf)をドラッグ&ドロップでインポートできるようになりました。
  • サマリビュー: 相関モード: 各列の欠損値の数と割合を表すバーが表示されるようになりました。
  • サマリビュー: ツールバーの 「列」のボタンから条件を指定して、列をフィルタできるようになりました。
  • サマリビュー: ツールバーの「行」のボタンから条件を指定して、データをフィルタできるようになりました。
  • テーブルビュー: ツールバーの 「列」のボタンから条件を指定して、列をフィルタできるようになりました。
  • テーブルビュー: 列のヘッダーの「i」アイコンをクリックすると、サマリの情報が表示されるようになりました。

修正された問題

  • アナリティクス: 予測変数の列の設定からベースレベルを変更しても機能しない。
  • アナリティクス: K-means: 列の選択と設定で列の関数を設定しても、プレビューのテーブルに元の列の値が表示される。
  • アナリティクス: K-means: 欠損値のために除外された行の数がサマリタブに表示されるようになりました。
  • アナリティクス: リッカートシグマ法がアナリティクスビューの前処理の関数として使用できるようになりました。これにより、 5段階評価などのアンケートの尺度データを正規化するのに役立ちます。
  • アナリティクス: t検定: t検定を2回実行すると、エラーバーに異なる結果が出力される。
  • チャート: カテゴリのタイプの「等間隔」でラベルが設定できない。
  • チャート: アナリティクス: 列数が多いデータフレームでのパフォーマンスが向上しました。
  • チャート: エリア: 色に一意な値の数が1つしかない列を割り当てた場合、凡例が表示されない。
  • チャート: チャートプロパティから「軸のステップ幅」に「0」を指定していると、バーチャートのY軸の目盛に奇妙なオブジェクトが表示される。
  • チャート: X軸を「等間隔」によってカテゴリ化している場合、X軸の小数点以下の桁数の設定が機能しない。
  • チャート: 密度曲線: マウスオーバーした時のポップアップに表示される「Density」を「密度」に翻訳しました。
  • チャート: エラーバー: エラーバーを作成し、チャートタイプをエラーバー(集計済データ)に変更して、再度エラーバーに戻すと、「割合の対象」が「全体」に切り替わってしまう。このぷションは「X軸」のままにしておく必要がある。.
  • チャート: 集計関数に「IQR」を選択した場合、IQRでの出力は「1.5」倍になる。
  • チャート: 地図 - 緯度/経度: グループ化に「行番号」を設定していると、「詳細を表示」が機能しないことがある。
  • チャート: ソート:全体に対する割合として表計算を使用した場合、並び替えられる順番に誤りがある。
  • ダッシュボード: ダッシュボードのチャートデータをCSV形式でエクスポートし、ファイルをファイルエクスプローラーでダブルクリックして開くと日本語の文字で文字化けが発生する。
  • ダッシュボード: ダッシュボードに多くのチャートが含まれている場合、“RangeError [ERR_BUFFER_OUT_OF_BOUNDS]: Attempt to write outside buffer bounds”というエラーでパブリッシュに失敗する。
  • データソース: CSV: ディレクトリに無効なシンボリックリンクが含まれている場合、「CSVファイルの選択」のダイアログにファイルが表示されない。
  • データソース: Excel: 列数が100列を超える場合、列のデータタイプを上書きできない。
  • データソース: Google ドライブ: ファイル名を選択して、共有アイテムから複数のCSVファイルをインポートできない。
  • データソース: ローカルファイル: クラウドストレージファイルのように、親フォルダーのボタンをクリックして子フォルダーを開けるようにフォルダーナビゲーションをサポートしました。
  • データソース: Salesforce: 列データが空の場合、クエリ結果にその列が含まれない。
  • データソース: Snowflake: セッションでウェアハウスが正しく設定されておらず、“57P03: No active warehouse selected in the current session”というエラーが発生する。
  • データラングリング: 同じデータフレーム内の別のブランチを結合するステップを持つブランチデータフレームをコピーすると、ターゲットのデータフレームが存在しないことを表すエラーメッセージが表示される。
  • データラングリング: 列の並び替え: 選択している列を解除する「選択をクリア」のボタンを追加しました。
  • データラングリング: カテゴリを作成: カテゴリの作成時に「範囲の端の扱い」およびその他のパラメーターをサポートしました。
  • データラングリング: カテゴリを作成: 「ファクター型として順序を保持する」のチェックボックスをオフにしても、ファクター型の列が作成される。
  • データラングリング: Excelファイルのエクスポート: デフォルトの日付形式がyyyy/mm/ddに変更され、過去に選択した日付形式が記憶されるようになりました。
  • データラングリング:アルファベットの抽出: 抽出後の結果のデータタイプはリスト型ではなく文字列型である必要があります。
  • データラングリング: 元の値を新しい値で置換: ダイアログにて、ファクター型で設定された順序で値がソートされない。
  • データラングリング: 列数が多い(例:5000列以上)データフレームでは、列を選択などのUIでの操作が非常に遅くなっていたためパフォーマンスを向上しました。
  • データラングリング: ロング型からワイド型へ: ダイアログにプレビュー結果が表示されるようになりました。
  • データラングリング: 指定した行を列名にする: 「列名をきれいにする」のオプションでは、Non-ASCII文字が保持されない。
  • データラングリング: マージ / Union: マージに使用されるデータフレームの名前が変更された場合、名前が変更されたデータフレームをデータフレームの選択のリストから削除できない。
  • データラングリング: マージ / Union: データフレームの検索時に「全選択」が機能しない。
  • データラングリング: 計算を作成: 計算を実行した後、テーブルビューのスクロール一は維持される必要がある。
  • データラングリング: ロング型からワイド型へ: spread関数の代わりにpivot_longerの関数を使用するようになりました。
  • データラングリング: 孤立したブランチが作成され、“dagops.members: dataframe abc does not exist in the catalog”のエラーが表示される。
  • データラングリング: ピボット: データフレームに行がなかったときに、“Data from the previous step is empty when there was no record in the data frame.”のエラーが発生する。
  • データラングリング: 元の値を新しい値で置換: 前のステップで列名を変更すると、列の選択を解除できない。
  • データラングリング: ステップデータのキャッシュを削除しても、チャートが更新されない。
  • データラングリング: テキストデータの加工: 句読点を削除しても、$などの記号が削除されない。
  • データラングリング: 特定の条件によって、左側のデータフレームのリストに同じブランチデータフレームが繰り返し表示される。
  • データラングリング: 大きな数値を含むデータをShift-JIS エンコーディングのCSVファイルとしてエクスポートすると、値が指数表記でエクスポートされる。
  • エクスポート: 列数が非常に多いデータフレーム(数万列, 数十行)でエクスポートでハングする。
  • インストール: CRANから無効なRパッケージをインストールしようとすると、ネットワークエラーのダイアログが表示される。
  • パラメーター: パラメーター間に依存関係がある場合、ダッシュボードのパラメーターのLOVが更新されない。
  • パラメーター: パラメーターの値をリストを持つデータフレームをEDFファイル経由でエクスポートおよびインポートをすると、その名前がランダムに生成された文字列に変わってしまう。
  • パブリッシュ: クラウドストレージのCSVデータをパブリッシュした後、列に設定されたデータ型の変更が適用されず、その列を使用する結合ステップでデータ型の不一致のエラーが発生する。
  • パブリッシュ: パブリッシュ時にストレージサイズの制限を超過した場合のエラーメッセージを改善しました。
  • パブリッシュ: モデルのステップがあるデータをパブリッシュしようとすると、“s.getSummary(…).concat is not a function”というエラーが発生する。
  • パブリッシュ: パラメーターでデータフレームから値を取得する際に、参照がうまくできない場合のエラーメッセージを改善しました。
  • サマリビュー: 列名にコンマやダブルクォートなどの特殊文字が含まれていると、サマリビューからエクスポートしたCSVデータが破損する。
  • サマリビュー: データフレームに多くの一意な値の数を持つ文字列型の列がある場合、サマリビューの表示に時間がかかる。
  • サマリビュー: 列数が多いデータフレームでのサマリビューの表示のパフォーマンスが向上しました。

6.11.4

2022年11月16日リリース。

修正された問題

  • データソース: Excel: Excelファイルで100列を超える場合、列のデータ型を上書きできない。
  • データラングリング: 条件を設定して置換: 新しい値のデフォルトのタイプを列に変更すると、列に対象となる列が自動的に設定されない。
  • データラングリング: 新しい値で置換: 前のステップで選択した列を削除すると、対象となる列から列の選択を解除できない。
  • データラングリング: 親ブランチに更新があった場合、子ブランチにあるキャッシュされたステップが黄色に変わらず、古いキャッシュのまま表示されてしまう。
  • チャート: ステップの古いキャッシュが削除されると、その時点で表示されるチャートが期待通りに再描画されない。
  • チャート: 列の集計関数に四分位範囲(IQR)を選択した場合、IQRの1.5倍の値が返されてしまう。
  • ダッシュボード: 行を削除する際の確認メッセージを改善しました。
  • ダッシュボード: ExploratoryデスクトップのダッシュボードからチャートデータをCSVファイルとしてエクスポートし、そのファイルをダブルクリックでExcelで開くと日本語の文字が文字化けする。
  • パブリック: プロジェクトを閉じる時に表示される「プロジェクトのパブリッシュ」を初めてキャンセルした時に、プロジェクトが削除されない。
  • アップグレード: Exploratoryの最新バージョンにアップグレードした時に、ホームディレクトリの名前にスペースが含まれている場合、名前にスペースを含まない別のパスにレポジトリ(ホームディレクトリの下の.exploratory)を移動する必要があります。最新のExploratoryで動作するパスにレポジトリを移動する方法が明確になるように、このケースの処理を改善しています。

6.11.3

2022年11月9日リリース。

修正された問題

  • チャート: エリア: X軸にNumeric(数値)型またはDate(日付)型の列を選択し、色(グループ化)に列に選択したときに、全てが欠損値になるカテゴリがあると、最大のカテゴリとして凡例に表示されてしまう。
  • チャート: 等間隔のカテゴリを作成したときに、プロパティから設定した小数点以下の桁数が反映されない。
  • チャート: Y軸に複数の列を選択したときに、2番目の列にY2軸を割り当てた状態で、「値をプロット上に表示」するオプションに「中央」を選択すると、エラーが表示される。
  • チャート: 「色、グループ、並び順の設定」で「グループ分けのタイプ」に「論理条件」を利用すると、色の順番がおかしくなる。
  • データソース: Google Analytics: Google Analytics 4のデータをインポートするときに、データのパースに失敗する。
  • データソース: Google Drive: 「共有アイテム」からExcelファイルの「インポート&マージ」を選択すると、「Google Driveフォルダの中に指定された条件に合うファイルが見つかりません」というエラーが表示される。
  • データラングリング: フィルタ: Date(日付)型と POSIXct(日付時間)型の 列で、演算子に「どれかに等しい」を選択し、「日付タイプ」に「年月」を選んだときに、表示されている構文通りに動作しない。
  • データラングリング: 結合: 「結合する列を選択」の緑色のテキストがクリックしづらい。
  • データラングリング: 「フィルタ」や「条件を指定して置換」で、長い名前の列を使うと、レイアウトが崩れることがありました。
  • データラングリング: 値のリストの最大表示数を5000から1000に減らし、利便性を高めました。
  • データラングリング: 複数選択のウィジェット: ダイアログを再度開いたときに初めて、選択した項目が一番上に表示されるようになりました。
  • データラングリング: カスタムRステップを編集すると、左側のデータフレームの表示領域で同じブランチが繰り返し表示される。
  • データラングリング: ステップデータをファイルとしてエクスポートすると、デフォルトで設定されるファイル名に不要なインデックス番号が含まれていました。
  • インストール: Windows: 「Windowsシステムの文字エンコードを使用」のデフォルト値が「はい」に戻っています。
  • インストール: リポジトリのパスにスペースが含まれていると、“Failed to validate the installed R packages” というエラーが表示されました。現在は、スペースが含まれていないパスを利用するように促しています。
  • ノート: テキストの表示エリアの幅が狭かったため、広くしました。
  • パブリッシュ: サーバーのストレージの上限に達したときに、各インサイトのバージョン履歴の削除を促すメッセージが表示されるようになりました。
  • サマリビュー: ヒストグラムにマウスカーソルを合わせたときに、値の文字数が多いと、表示されるポップアップの幅が広くなりすぎてしまう。
  • 一般: プロキシサーバー経由でexploratory.ioにうまく接続をできないと、プロジェクトを開くときに “Cannot read properties of null (reading ‘name’)” というエラーが発生する。
  • 一般: プロキシ: ホワイトリストの先頭に「 *」という文字列 を設定できないようにしました。
  • 一般: SSL証明書を書き換えるタイプのプロキシサーバー経由でexploratory.ioに接続できるようになりました。

6.11.2

2022年10月18日リリース。

機能強化

  • データソース: 「追加パラメーター」を設定して、MS SQL Server / Azure SQL / SnowflakeにSSLを使わずに接続できるようになりました。
  • データラングリング: 条件を指定して置換: 条件を行単位で無効化できるようになりました。
  • データラングリング: 条件を指定して置換: 条件内のトークンをドラッグ&ドロップで並び替えられるようになりました。
  • データラングリング: 条件を指定して置換: 設定した新しい値の順序に基づき、データ型をfactor(順序付きカテゴリ)型に変更できるようになりました。
  • データラングリング: 条件を指定して置換: リセットボタンを追加して編集前の状態に戻せるようになりました。
  • データラングリング: 条件を指定して置換: 新しい値のデータ型を変更したときに、過去の新しい値を記憶して、データ型を元に戻したときに、過去に設定した内容が表示されるようになりました。
  • データラングリング: 表計算: Date型の列から「からの差…」を選んだときに、デフォルトで設定される「期間の単位」が「日」になり、POSIXct型の場合は「期間の単位」が「時」になりました。
  • チャート: ライン、バー、散布図(集計あり)、エラーバーの「色、グループ、並び順」の設定の「並び順」から色の並び順を変更できるようになりました。
  • チャート: 散布図: 「使用されていないレベルを表示」のオプションを追加し、使用していないレベルを非表示にできるようになりました。
  • チャート: トレンドライン: ライン、散布図(集計あり)の「色で分割」に列を設定しているときにも、「トレンドライン設定」ダイアログから「対象」を「すべて」に設定して、全体のトレンドラインを描けるようになりました。

修正された問題

  • データラングリング: 新しいステップを追加する時に、“belongsTo attribute to set to the inserted step does not match with the step that would be the next step of the inserted step”のエラーを含むエラーメッセージのダイアログが表示されることがある。
  • データラングリング:UIの言語を英語にした時に、モデルで予測のダイアログにあるラジオボタンのラベルがオーバーフローする。
  • データラングリング: 条件を設定して置換: 新しい値のデータ型のデフォルトを「文字」に変更しました。
  • データラングリング: 条件を設定して置換: 対象となる列に複数列を指定する場合、条件のデフォルトの列に「選択された列」が設定されるように変更しました。
  • データラングリング: 新しい値に置換: ダイアログが一つの列のみで開かれている場合、Shiftキーを使用した複数列の選択が機能しない。
  • チャート: 色: 色の並び順に「Y軸の値」を選択し、方向に「下から上」を選択すると、「その他」グループがバー(積み上げ)とエリアの上部に表示されるように変更しました。
  • チャート: 色: 論理値(logical)型のデフォルトの色の方向を「下から上」に変更しました。
  • チャート: 色、グループ、並び順の設定: 並び替えのドロップダウンは「方向」と「並び順」で分けて選択できるように変更しました。
  • チャート: 地図 - 経度/緯度でグループ化に「行番号」を、色に数値列を「離散値」として選択すると、色とグループの設定のダイアログが開かない。
  • チャート: 集計テーブルで“Invalid argument was passed to returnsNumericValue”というエラーが原因で表示されない。
  • アナリティクス: ランダムフォレスト/XGBoost/線形回帰/ロジスティック回帰/その他: データ分割の方法に「データの順序を保つ」を設定していると、テストモードがオフ(FALSE)でも最後の1行がテストデータに分割される。
  • ダッシュボード: 複数選択のパラメータのウィジェットのスタイロを変更した後に、「詳細を表示」を行うとダイアログ上でエラーが発生する。
  • ダッシュボード: ページタブにマウスカーソルを合わせると、ページ名が長い場合のみポップアップを表示するように変更しました。
  • ノート: ダッシュボードを実行した後にノートを開くと「実行」ボタンが誤った位置に表示される。
  • パブリッシュ: データを共有するためにパブリッシュダイアログを開くと、スピンアイコンが消えない。
  • インストール: RおよびGitのインストールダイアログでタイムアウトをサポートしました。

6.11.1

2022年10月5日リリース。

互換性のない修正

  • データソース: MS Access: Windowsで非ASCII文字のデータ、またはクエリを非ASCII文字のテーブルや列からインポートするためには、WindowsとRでUTF-8のサポートを有効にする必要があります。UTF-8のサポートを有効化する手順はこちらをご覧ください。

機能強化

  • チャート: 散布図(集計なし)のチャートで、トレンドラインの対象に「全体」を選択した時に、凡例にトレンドが表示されるようになりました。
  • 一般: クリップボードにエクスポートするためのデータの形式を選べるようになりました。
  • アナリティクス: トピックモデル: 「ドキュメント」タブのドキュメントが並び替えられ、同じトピックに関連するドキュメントが互いの近くに表示されるようになりました。
  • アナリティクス:因子分析: 「重み(バー)」タブの変数が並び替えられ、同じ因子の影響を受ける変数が互いの近くに表示されるようになりました。

修正された問題

  • データソース: CSV: ファイルをインポートすると、“The size of the connection buffer was not large enough”というエラーが表示されインポートに失敗する。
  • データラングリング: 条件を指定して置換: 条件の並べ替えが機能しない。
  • データラングリング: フォルダを複製したときに、ブランチから作成されたブランチのチャートのサムネイルが複製されない。
  • データラングリング: データソースのステップで、Parquetファイルの属性情報が表示される。
  • データラングリング: フィルタ: データ型が同一でも列を変更すると、パラメーターの選択が外れてしまう。
  • データラングリング: フィルタ: ダイアログを開きなおすと、選択可能な値のリストが表示されない。
  • データラングリング: マージ: 選択したデータフレームがリストの一番上に表示されない。
  • データラングリング: 集計: 値に「全ての数値型の列」を選択したときに、集計関数の「最初の行の値」が機能しない。
  • データラングリング: 表計算: 緑色のテキストの後方をクリックしたときに、編集ダイアログがうまく開かない。
  • チャート: ハイライト: 「色とグループの設定」ダイアログで、検索をクリアせずに適用ボタンをクリックすると、ハイライトした値が2つあっても、「1つの値」と表示される。
  • チャート: バー: 色にLogical(ロジカル)型の列を選択して、「色とグループの設定」に論理条件を追加するとエラーになる。
  • チャート: ノートを複製し、任意のチャートから「色とグループの設定」ダイアログを開き、カラーパレットから「カスタムカラーパレット」を選択すると、「プロジェクトの複製」ダイアログが表示される。
  • チャート: テーブル: Character(文字列)型の列からNumeric(数値)型に変換した列で、カラーフォーマットが正しく動作しない。
  • チャート: テーブル: Numeric(数値)型の列の「列のフォーマット」で、値のタイプに「パーセント(%)」を選択した後に、該当の列がロジカル型に変わるとエラーになる。
  • アナリティクス: トピックモデル: ドキュメントのタブで表示される単語の色が適切ではありませんでした。
  • ダッシュボード: 列の高さが低いときに、「行を追加または削除」のアイコンが見切れてしまう。
  • パブリッシュ: チームの管理者のプランがビジネスプランでないことで、チームのメンバーがインサイトをパブリッシュしたときに、適切なエラーメッセージが表示されない。
  • パラメーター: 複数選択のウィジェットの高さを固定値に変更しました。
  • インポート: 壊れたプロジェクトファイルをインポートしたときに、エラー画面だけが表示され、プロジェクトが壊れていることがわからない。
  • プロジェクト: エクスポートをキャンセルしたときに、不要なRの再起動が生じる。
  • 一般: システム設定から設定したシステムエンコーディングの情報が保存されておらず、再起動したときその情報が消えてしまう。

6.11.0

2022年9月27日リリース。

互換性のない修正

  • チャート: パイ: 「その他」グループと「値でソート」がチェックされている「パイ/リング」チャートがある場合、値の大きさ(スライスサイズ)に関係なく「その他」グループが最後に表示されるようになります。

機能強化

  • データソース: Googleアナリティクス: Googleからプロファイル情報を取得するときのパフォーマンスを改善しました。
  • テーブルビュー: プロパティから空白やタブなどの不可視文字を表示できるようになりました。
  • テーブルビュー: プロパティから数値のフォーマットを設定して、桁区切りで数値を表示できるようになりました。
  • テーブルビュー: プロパティから列のヘッダにNA(欠損値)の割合のバーを表示できるようになりました。
  • データラングリング: マージ: データフレームのリストから、チェックボックスを使って複数のデータフレームを選択できるようになりました。
  • データラングリング: フィルター: 「どれかに等しい」や「どれにも等しくない」の演算子で、より簡単に複数の値を選択できるようになりました。
  • データラングリング: フィルター: 「この文字列から始まる」や「この文字列で終わる」の演算子で、複数の値を指定できるようになりました。
  • データラングリング: 結合: 結合先のデータフレームから結合する列を選択できるようになりました。
  • データラングリング: ブランチからブランチを作成できるようになりました。
  • データラングリング: 「値を置き換える」ときに、複数列の値を一度に置き換えられるようになりました。
  • データラングリング: 複数の列を選択した状態で、「計算を作成」するときに「条件を指定」できるようになりました。
  • データラングリング: 条件を設定して置換: UIを再設計して、複数条件の入力、条件処理の順番の並び替え、テキストの入力をサポートしました。
  • データラングリング: テキストデータの加工: 漢数字を数字に変換したときのデータタイプが数値型になりました。
  • チャート: 散布図: ハイライト: 「ハイライトしない値は「その他」として表示する」オプションを使って、描画パフォーマンスを改善できるようになりました。
  • チャート: 色とグループの設定: バーチャート(積み上げ)やエリアチャートで、凡例と値の並び順を個別に設定できるようになりました。
  • チャート: 「色で分割」に列を選択しているときに、散布図のトレンドラインの対象に「全体」を選択して、全てのデータを使ったトレンドラインを引けるようになりました。
  • チャート: ピボットテーブル、集計テーブル、地図 - 標準、地図 - 拡張、地図 - 経度/緯度などのチャートをクリックして、詳細データを表示できるようになりました。
  • チャート: 表計算の、計算タイプの「値」で、「前の値」、「次の値」、「前の期間の値」をサポートしました。
  • チャート: バー、エラーバー、エラーバー(集計済データ)などのチャートの「値をプロット上に表示」のプロパティから、値を「中央」に表示できるようになりました。
  • チャート: 箱ヒゲ図とバイオリン図で、「向き」に「横」を選択できるようになりました。
  • チャート: 集計テーブルとピボットテーブルで、「表示する値の制限」を利用できるようになりました。
  • チャート: 集計テーブル: プロパティから「ホバー時にポップアップを表示」オプションを変更して、ポップアップを表示させるかどうかを選択できるようになりました。
  • アナリティクス: コックス回帰 / サバイバル・フォレスト: 新しいデータを使って、特定の日付の観察対象の生存率や、観察対象の生存率が特定の値を下回る日付を予測できるようになりました。
  • アナリティクス: 因子分析: 因子ごとにスコアが高い変数がまとまるように、因子のスコアに重みを付けて、「重み(表)」タブの値を並び替えました。
  • アナリティクス: トピックモデル: 登場頻度が多いトピックから順にトピックの番号が割り振られるようになりました。
  • ダッシュボード: ノート: チャートをクリックすることで、詳細データを表示できるようになりました。
  • ダッシュボード: ノート: Exploratoryデスクトップ上のチャートやアナリティクスで、「チャートの画像をエクスポート」や「チャートのデータをエクスポート」のオプションをサポートしました。
  • ダッシュボード: 追加したテキストをマークダウンエディタを使って編集できるようになりました。
  • ダッシュボード: それぞれの行や列からチャートを追加できるようになりました。
  • パラメーター: 値を選択するときに、プルダウンやリスト形式をサポートすることで、パラメーターの値の選択を簡単にできるようになりました。

修正された問題

  • データソース: データカタログ: データカタログのリストが更新日時の順で並び替えされていない。
  • データソース: JSON: ネストされたデータフレームを選択すると、JSONファイルのインポートダイアログで”invalid subscript type list”のエラーが発生する。
  • データラングリング: 結合のダイアログで「列名の接尾語」を片側のみに追加した時に機能しない。
  • データラングリング: データタイプがPOSIXct(日付時間型)の列を含むデータをデータフレームとして保存した後、データフレームを再度開くと列のデータタイプがCharacter型(文字列型)になる。
  • データラングリング: 列を選択 / 削除のダイアログでOKボタンをクリックしても応答しない。
  • データラングリング: フィルターダイアログのカスタムを使用した際に、コマンド+エンターのショットカットキーが実行されない。
  • データラングリング: 新しい値を指定: 値を検索すると、検索したテキストと一致しない値が表示される。
  • データラングリング: 集計: 同じ日付列をグループに複数回割り当てると、2番目以降の列は1番目で集計された日付の値が使われる。
  • データラングリング: 集計: 集計のダイアログで列名の編集を開くと、別の列名が表示される。
  • チャート: 色: チャートに使用されたカスタムカラーパレットを編集した場合、チャートがすぐに反映されない。
  • チャート: 色: 色とグループの設定のダイアログで、長いカテゴリ名の表示が途切れてしまう。
  • チャート: チャートのデータをGoogleスプレッドシートにエクスポートすると、空のセルに「null」の値が表示される。
  • チャート: Y軸に複数の列を割り当てている状況で1番目の列を削除した場合、2番目の列が1番目に移動するが、表計算の設定は列の移動に追従しない。
  • チャート: 散布図(集計あり): グループ化に行番号を割り当てた場合、詳細を表示すると全てのデータが表示される。
  • チャート: ピボット / 集計テーブル: カテゴリ値の色がfactor型またはテキストの順序を尊重していない。
  • チャート: ピボット / 集計テーブル: フォーマットのダイアログを再度開いた場合、「全ての列に適用」のチェックボックスが最後に実行された時の状態を保持しない。
  • チャート: レーダー: 値の列をドラッグ&ドロップで移動した後、列の割り当てが台無しになる。
  • チャート: レーダー: 繰り返しを使用した時のチャート間のデフォルトの余白のサイズを大きくすることで、ラベルやチャートの重なり、配置の誤りを回避。
  • チャート: テーブル: テキストの折り返しのオプションを設定しても、長いURLのテキストが途切れてしまう。
  • チャート: 「その他」グループはカテゴリの最後に表示するように変更。
  • チャート: 数値のカテゴリ化の「等幅」で範囲の端の扱いに「上端を含める」を設定し、「範囲の下限」に値を設定しなかった場合、最小値が含まれない。
  • チャート: 繰り返しを使用するとポップアップの位置がずれて表示される。
  • チャート: エリア: クイック表計算のサブメニューの位置がずれて表示される。
  • アナリティクス: タイプを「単語のカウント」から「トピックモデル」に変更すると、選択されていた辞書がリセットされる。
  • アナリティクス: カイ二乗検定: ピボットテーブルに各列ではなくテーブル全体に基づく割合の値が表示される。
  • アナリティクス: “cannot read properties of undefined (reading ‘deps’)“というエラーが原因でアナリティクスビューのピンのアイコンがクリックできない。
  • ダッシュボード: ダッシュボードを開いた後に別のノートを開くと、実行ボタンが誤った位置に表示される。
  • ダッシュボード: パラメーターを変更した後に全画面モードでチャートを表示すると、チャートにパラメーターの変更が反映されない。
  • ダッシュボード: 「その他」グループにカスタムで色を設定すると、チャートに「その他」の正しい色が表示されない。
  • ダッシュボード: ページ名に括弧、中括弧、アンダースコアなどの特殊文字が含まれていると、ダッシュボードのレイアウトが壊れる。
  • ダッシュボード: サイズの大きなダッシュボードを公開している時に、Exploratoryデスクトップが突然終了する。
  • ダッシュボード: HTMLエクスポートによって作成されたzipファイルをエクスポートする場合、フォルダ名がダッシュボード名と一致しない。
  • ダッシュボード: ダッシュボードにあるチャートデータをCSVファイルとしてエクスポートした場合、Excelで開くと日本語が文字化けする。
  • ダッシュボード: チャートやナンバーチャートのタイトルを編集する時、誤ってダイアログの外側をクリックするとダイアログが閉じる。
  • ダッシュボード: ダッシュボードのプレビューが失敗してしまうとパラメーターを更新することができない。
  • ノート: チャートに表示するデータがない場合、「表示するデータがありません」というメッセージと共に、不要な縦のスクロールバーが表示される。
  • パブリッシュ: 接続がタイムアウトした場合、パブリッシュダイアログは15秒後に表示されます。
  • エクスポート: プロジェクトをエクスポート、またはインポートをすると、プロジェクトを開くと一部のフォルダーが開いた状態で表示される。
  • 一般: アプリケーションの起動時にスプラッシュスクリーンの隅が表示されない。
  • 一般: Windowsでデータフレームを開くと、内部で持っているキャッシュデータであるParquetファイルの読み込みでフリーズすることがある。
  • インストール: パスワードで保護されたプロキシを使用している場合、CRANからのRパッケージのインストールがうまく機能しない。

6.10.6

2022年8月17日リリース。

修正された問題

  • データソース: JSONファイルのインポートダイアログの左側にあるツリーでネストされたデータフレームを選択すると、 “invalid subscript type ‘list‘“のエラーが表示される。
  • データラングリング: 集計: グループ化と値に同じ列を使用すると、計算結果にグループ化が反映されない。
  • データラングリング: フィルター: 列ヘッダメニューからフィルタの「カスタム」を選択するとフィルタのダイアログが表示されない。
  • データラングリング: 表計算:プレビューにある行数を変更した上で「プレビュー」ボタンをクリックしても結果が更新されない。
  • チャート: チャートのテーブルデータをGoogle Sheetsにエクスポートした際に、空のセルに「null」の値が入ってしまう。
  • ダッシュボード: 大量のデータを含むダッシュボードをプレビューまたはパブリッシュしようとすると、Exploratoryデスクトップがフリーズまたはシャットダウンしてしまう。
  • パラメーター: パラメータータイプを値のリストから「テキスト入力」に変更すると、“e.value.map is not a function” error.のエラーが発生する。

6.10.5

2022年7月26日リリース。

修正された問題

  • データソース: Amazon Redshiftのデータソースで新しく作成されたデータを保存しようとすると”error code 127”のエラーが発生する。
  • ダッシュボード: パブリッシュしたダッシュボードからチャートデータ(CSVファイル)をエクスポートしてExcelで開くと、日本語の文字が文字化けする。

6.10.4

2022年7月15日リリース。

機能強化

  • 一般: R 4.2.1がサポートされました。
  • データソース: AWS Athena:HTTPプロキシをサポートしました。
  • データラングリング: 表計算 / ピボット / 集計: ダイアログでの列選択のウィジェットの使いやすさを改善しました。
  • チャート: 色とグループの設定ダイアログ: カラーパレットのドロップダウンのメニューに「カスタムカラーパレットの編集」が追加されました。
  • チャート: 色とグループの設定ダイアログ: 手動、等幅、等頻度のグループ分けのタイプに「範囲外の値」オプションが追加され、範囲外の値を別グループにするまたは無視することができるようになりました。
  • チャート: ピボット / 集計テーブル / テーブル: 列の幅の設定にある全ての列に適用のチェックボックスをオンにすることで、全ての列の幅を一度に変更できるようになりました。
  • ダッシュボード / ノート: パブリッシュされたダッシュボードとノートの各チャートのデータとイメージをダウンロードできるようになりました。
  • ダッシュボード: プロパティダイアログからコンテンツ領域のタイトルを表示/非表示を設定できるようになりました。
  • ダッシュボード: ダッシュボードの中に何も含まれていない場合でも行/列の追加ができるようになりました。
  • エクスポート: 前回のエクスポート時に設定したディレクトリが記憶されるようになりました。
  • エクスポート: エクスポート/パブリッシュされた.dfファイルまたは.edfファイルにCSVファイルやExcelファイルなどの元のローカルデータファイルが含まれるようになりました。
  • インストール: Exploratoryのレポジトリから使用されていない古いRパッケージのフォルダを削除するようになりました。

修正された問題

  • データソース: MS Access: Exploratoryデスクトップを閉じた後に、ロックファイルが削除されない。
  • データソース: 文字データがUTF-8だった時に無効となり、RODBCデータソースをロードできない。
  • テーブルビュー / サマリビュー: Date/POSIXct型の列のInf/-Infの値はテーブルビュー及びサマリビューではNAとして扱われていた。
  • データラングリング: データフレームを複製した後、ツールバーとデータフレームリストにソースとなるデータフレーム名が表示されていた。
  • データラングリング: データフレーム名が競合している場合、ドラッグ&ドロップによる.df(データフレーム)ファイルのインポートが機能しない。
  • データラングリング: 計算を作成-複数の列に@{}パラメーター表記のサポートがされていない。
  • データラングリング: 値に文字列を選び集計関数に数値を返す集計関数を選択すると、「cannot convert」のエラーが発生する。
  • チャート: バーチャートでX軸にロジカル型の列を割り当てた際、X軸の値の表示名を編集するとポップアップの「詳細の表示」オプションが失敗し、「Error code 127」のエラーが表示される。
  • チャート: ラインチャートでX軸に日付列を割り当てた際、日付の単位に「RAW」を選択した場合、詳細の表示には行が表示されませんでした。
  • アナリティクス: ステップでK-meansを実行する場合、「列を除外」のオプションを使用して文字列型の列を除外することができない。
  • ノート: ナンバーチャートはワード文書にエクスポートした際に表示されない。
  • ダッシュボード: テキスト編集のダイアログの外側をクリックすると編集ダイアログが閉じてしまう。
  • ダッシュボード: タイトルにからのテキストを設定すると、コンテンツ領域のタイトルが折り畳まれて表示される。
  • ダッシュボード: 行が一つしかない場合、その行からチャートを削除した後にチャートの追加ボタンが表示されない。
  • パラメーター: パラメーターのデータタイプを変更した場合、不要になったドロップダウンのオプションをメタデータファイルから削除する必要がある。
  • 一般: Exploratoryデスクトップでプロキシを設定すると、コラボレーションサーバーに接続できない。
  • 一般: gitロックファイルが存在する場合、プロジェクトを開くことができない。
  • 一般: Windows: 画面がフリーズして場合によっては応答しませんでした。
  • インストール: M1 MacでRパッケージをリセットすると、エラーが発生する。

6.10.3

2022年6月30日リリース。

修正された問題

  • コラボレーション: ホームディレクトリの名前にスペース文字が含まれている場合、プロジェクトの更新に失敗する。
  • データラングリング: ピボットのステップにて数値以外の列を値に割り当てると「Can’t convert」というエラーがでる。

6.10.2

2022年6月20日リリース。

機能強化

  • チャート: レーダーチャート: 値の開始位置を指定できるようになりました。
  • ダッシュボード: 情報ボタンをクリックしたときに表示されるチャートの一覧に、ページの情報を追加しました。

互換性のない修正

  • チャート: レーダーチャート: デフォルトの値の開始位置が、“右”から “上”に変更されました。この変更は作成済みのすべてのレーダーチャートに適用されます。なお、開始位置はチャートのプロパティから元に戻すことが可能です。

修正された問題

  • データソース: データソースをCSVからテキストインプット・データに変更できない。
  • データラングリング: ピボット: 欠損値を埋めるときの値の設定が反映されず、欠損値が1で置き換えられてしまう。
  • チャート: ピボットテーブル: 値にカスタムを選択して関数リストを表示させると、計算を作成するためのダイアログが見切れてしまう。
  • チャート: レーダーチャート: 値に同じ列を何度も選択すると、チャートが壊れることがありました。
  • チャート: ワードクラウド: パラメーターを実行して、表示する値がなくなったときにパブリッシュをすると、エラーが表示される。
  • ダッシュボード: ページを削除すると、実行ボタンが反応しなくなることがありました。
  • ダッシュボード: 列が一列しかないときに、列の高さをドラッグ&ドロップで変更できない。
  • ダッシュボード: 高さの設定ダイアログで行の高さの値が適切に丸められていませんでした。
  • プロジェクト: Windowsで、プロジェクト(.epf)をエクスポートしたときに、プロジェクトをエクスポートした場所が、Exploratoryのレポジトリがあるドライブと異なると、‘s.promises.utimesSync is not a function’というエラーが発生する。

6.10.1

2022年6月15日リリース。

機能強化

  • ダッシュボード: ページタブの上にマウスを重ねると、ポップアップダイアログにページコメントが表示されるようになりました。

修正された問題

  • データソース: パスワードでロックされたExcelファイルをインポートした際のエラーメッセージを改善しました。
  • サマリビュー: 相関モードで列の選択を変更すると’another R process running’というエラーが表示されることがある。
  • サマリビュー: 計算を作成(Mutate)のステップで、ごく稀に、‘Cannot read properties of null (reading ‘map’)‘というエラーが表示されることがある。
  • チャート: バー: Y軸の値にカスタムを利用した状態で、表示する値の制限に「現在のY軸の値」を利用すると、適切な結果を得られない。
  • チャート: 色(グループ化)に数値型の列を選択し、グループ分けのタイプに等間隔を設定したときに、間隔の値を設定していないと、詳細が表示されずにエラーになる。
  • エクスポート: ブランチ内のチャートまたはアナリティクスをエクスポートすると、インポート時にブランチ名が元の名前ではなくランダムな文字列になる。
  • プロジェクト: プロジェクト内で検索をしたときは、検索結果に関係なく、常に選択中のデータフレームが表示されるようになりました。
  • プロジェクト: ”(” のような、記号などの特殊文字を使って、プロジェクト内を検索できない。

6.10.0

2022年6月12日リリース。

機能強化

  • データソース: CSV: データファイルの適切な区切り文字を自動的に推測するようになりました。
  • データソース: CSV: エンコーディングがUTF-16のファイルをインポートできるようになりました。
  • データソース: 新たにテキスト・インプットデータのタイプが追加されました。これにより、区切られたテキストデータを手動で入力してインポートすることができます。
  • データラングリング: 集計、表計算、ピボットのダイアログにて「プレビュー」ボタンが追加されました。
  • データラングリング: 分割: 区切り文字のカスタムに「正規表現」モードがサポートされました。
  • データラングリング: 集計: count_ifとsum_if関数ファミリーに「割合」のバージョンがサポートされました。
  • データラングリング: テキストデータの加工: 指定した文字の前後の文字列に「文字」と「正規表現」のオプションを追加しました。
  • データラングリング: テキストデータの加工: 取り除く、置換、抽出の機能で「文字(日本語を含む)」と「英数字」、「アルファベットと数字」がサポートされました。
  • データラングリング: 米国の州の変換: 変換の前にデータからスペースと記号を削除するようになりました。
  • チャート: 数値のカテゴリ化のオプションで「等幅」で値の「範囲」を設定できるようになりました。
  • チャート: 数値のカテゴリ化のオプションで「等間隔」がサポートされました。
  • チャート: 「SUM_IF」や「COUNT_IF」関数などの条件付き集計関数を使用できるようになりました。
  • チャート: ピボットテーブル / 集計テーブル: メニューから「ビジュアルフォーマット」を選択して、セルを素早くフォーマットできるようになりました。
  • チャート: プロジェクトメニューから「カスタムカラーパレット」のダイアログにアクセスできるようになりました。
  • アナリティクス: 単語のカウント / トピックモデル: テキスト分析用のストップワードとつなぐ単語の独自の辞書を作成できるようになりました。
  • アナリティクス: 単語のカウント / トピックモデル: ストップワードとつなぐ単語の辞書をパブリッシュ及び共有することができます。
  • ダッシュボード / ノート: パブリッシュされたダッシュボードやノートに含まれるチャートのデータをダウンロードできるようになりました。
  • ダッシュボード / ノート: パブリッシュされたダッシュボードやノートに含まれるチャートのイメージをダウンロードできるようになりました。
  • ダッシュボード / ノート: ダッシュボードやノートに含まれるチャートに対してつけられたコメントを表示できるようになりました。
  • ダッシュボード: 新たに「列レイアウト」のオプションが追加されました。
  • ダッシュボード: 新たに「ページ」機能が追加されました。これにより、ダッシュボード内で複数のページを作成できます。
  • パラメーター: フィルタのダイアログにて、パラメーターを新規作成するためのプラスボタンをパラメーターのラジオボタンの隣に移動しました。
  • パラメーター: パラメーターペインに「設定」ボタンを追加しました。
  • コラボレーション: サーバへのプロジェクトの再パブリッシュ、またはローカルにあるプロジェクトとサーバー上にあるプロジェクトの同期は、差分のみを送受信するようになりました。これにより、プロジェクトの再パブリッシュと同期がはるかに高速になります。

互換性のない修正

  • 計算を作成(mutate)、集計(summarize) 、フィルタなどの処理の中で、他のデータフレームを参照している場合、 ”!!” 演算子をデータフレーム名に追加しないと、データフレームの参照が動作しなくなります。この変更は他のデータフレームとの依存関係をより正確に検出するために必要なものとなります。
こちらは、例えば以下のようなコードが機能しなくなることを意味しています。
上記のコードを動かすためには以下のようにコードを書き換える必要があります。

修正された問題

  • データソース: Google BigQuery: INT 64型の列をインポートすると欠損値になる。
  • データソース: Google BigQuery: 設定ダイアログで、Google クラウドストレージのバケットのリストが200件までしか表示されない。
  • データソース: データベース・データソースのユーザー名とパスワードの入力を省略できるようになりました。
  • データソース: 列数が多いデータをExploratoryサーバーにパブリッシュすると、 ‘long packets are not implemented’というエラーが表示され、パブリッシュに失敗する。
  • データラングリング: データフレームを削除すると、‘DAG Node does not exist case’というエラーが発生することがある。
  • データラングリング: サマリービューで列を検索すると、追加したステップのトークンが「作成中」になってしまう。
  • データラングリング: ビン(カテゴリ)の作成: 整数型の数値列でビン(カテゴリ)を作成したときの値の範囲の表記を「(1,3]」から「1-3」に変更しました。
  • データラングリング: 計算を作成(Mutate): count_ifを関数のリストに追加しました。
  • データラングリング: データフレームやブランチを削除したときに、依存するステップが再計算されない。
  • データラングリング: データフレームと同じ名前の列があると、「循環する関係を作ってしまいます」というエラーが表示される。
  • データラングリング: マージのオペレーションに「共通する行のみ結合」を選択したときに生成されるRコマンドが、データフレーム名をバックティックで囲んでいないため、Rのエラーが発生する。
  • データラングリング: 結合: 結合先のデータフレームに、結合元のデータフレームのキー列と同じ名前の列があっても、結合先のデータフレームのキー列が自動で選択されない。
  • データラングリング: ピボット: ‘value’という名前の列を選択すると、誤った計算結果が表示される。
  • データラングリング: データフレームを開くと、‘TypeError: Cannot read properties of undefined (reading ‘length’)’ というエラーが発生することがある。
  • テーブルビュー: “1.introduction”や”aaa.bbb.ccc.ddd”といった、ホスト名に似たテキストがURLリンクになることがある。
  • チャート: ピボットテーブルや集計テーブルで、集計関数に”TRUEの割合”や”FALSEの割合”などの割合の関数を選択したときの値の表記をパーセント(0-100%)から比率(0-1)に変更しました。
  • チャート: 色とグループの設定: 色(グループ化)に数値型の列を選択し、スケールに離散値(数値)を選択すると、値が1000以上のときに色の設定が機能しないことがある。
  • チャート: 色とグループの設定: テーブルで値を検索した状態で色を変更すると、検索結果がリセットされる。
  • チャート: 色とグループの設定: カラーパレットのリストに、カスタムパレットが表示されない。
  • チャート: 色とグループの設定: グループ数を変更すると、色の並び順が「上から下へ」にリセットされる。
  • チャート: 色(グループ化)にファクター型の列を選択したときのデフォルトのカラーパレットを「パレット1」に変更しました。
  • アナリティクス: K-Meansクラスタリング: エルボー・メソッドを実行したときに、データの行数が探索するクラスターの数の最大値よりも少ないと、エラーが発生する。
  • アナリティクス: 生存曲線: 色で分割に数値型の列を選択して、スケールにカテゴリを設定したときのデフォルトのカラーパレットを、ブルーのグラデーションのパレットに変更しました。
  • アナリティクス: トピックモデル: ドキュメントタブのチャートの設定に “テキストの折り返し”のオプションを追加しました。
  • ダッシュボード: 元のダッシュボードに多くの行がある場合、‘画面内に収める’ が機能しない。
  • ダッシュボード: テキストパネルの高さよりもテキストが長い場合、スクロールバーが表示されない。
  • ダッシュボード/ノート: 全画面表示の際、ワードクラウドが中央揃えにならない。
  • ダッシュボード/ノート: 「データの再インポート」にチェックを付けて、ダッシュボードやノートを実行すると、キャッシュされたステップが再計算されてしまう。
  • ノート: データソースエクステンションがインストールされていない状態で、エクステンションデータを使ったノートをパブリッシュすると、パブリッシュに失敗する。
  • パブリッシュ: ナンバーのテキストが、ダッシュボードのサムネイル画像に表示されない。
  • パブリッシュ: 元のデータが変わってしまうと、データフレームから取得した値を使って作成した単一選択の値のリストのパラメーターのデフォルトの値が消えてしまう。
  • プロジェクト: プロジェクトがパブリッシュされているときは、プロジェクト情報のダイアログに、サーバ側での最終更新日や、プロジェクトのURLが表示されるようになりました。
  • プロジェクト: データフレームを検索した状態で、データフレームの名前を変更すると、検索結果がおかしくなる。
  • エクスポート: キャッシュされたステップの前に、パラメーターを含むステップがあると、エクスポートやパブリッシュの際、 ‘object not found’というエラーが表示され、失敗することがある。
  • エクスポート: CSVファイルをエクスポートするときに、Shift-JISエンコーディングを選択すると、不要な行番号の列が追加される。
  • 一般: データフレームを複製した際、複製したデータフレームのポップアップにチャートのサムネイルが表示されない。
  • 一般: カスタムRスクリプト内で’install.packages’関数を利用すると、処理が終わらない。
  • 一般: Rパッケージの管理のダイアログを開くと、確認ダイアログが表示され、閉じることができない。

6.9.6

2022年4月19日リリース。

機能強化

  • データソース: Redshift、MariaDB / MySQL、およびPostgreSQLのUIに日本語のヘルプページへのリンクを追加しました。
  • データソース: Excelファイルのインポート&マージの機能を使ったとき、シート名が違う場合に出るエラーのメッセージを改善しました。
  • データラングリング: 「重複する行を除く」の動きに関する説明をUIに追加しました。
  • チャート: ピボットテーブル / 集計テーブル: TRUEの数、FALSEの数、欠損値の数、非欠損値の数の場合、合計の集計関数のデフォルトを「平均」から「合計」に変更しました。

修正された問題

  • データソース: Google BigQuery: インポートダイアログでページサイズのパラメーターを空白のままにすると、エラーが発生する。
  • データラングリング: ‘as_Date’関数が計算エディタで強調表示されない。
  • データラングリング:「欠損値(NA)の削除」のUIの中で列を選択した後、ダイアログが閉じない。
  • データラングリング: フィルター: Date(日付)型の列のフィルタに不要なタイムゾーンのオプションが表示される。POSIXct(日付と時間)型の列の場合にのみ表示されるべき。
  • データラングリング: 列ヘッダメニューから「全ての列が欠損値(NA)の行を除く」を実行すると、いずれかの列に欠損値が含まれている場合でも行が削除される。
  • チャート: 散布図(集計あり): Y軸にPOSIXct型の列を選び「時間の抽出」を指定した後に並び替えを有効にすると、エラーダイアログが表示される。
  • チャート: 色に数値列を割り当てて表示名と色を変更した場合、色が適切に割り当てられない。
  • チャート: 複数のY軸の列にカスタムの表示名を設定した場合、色の変更が適用されない。
  • チャート: 地図 - 標準: 「世界の国(太平洋中心)」では、タイプを「サークル」にした時に大西洋が中心になる。
  • アナリティクス: 時系列異常検知をステップとして作成する場合、「欠損値の処理」のパラメーターが変更できない。
  • 一般: Windows版のExploratoryの使用中にメモリ不足になった場合、Rserveが不安定になりExploratoryがシャットダウンする。
  • 一般: Exploratoryデスクトップを起動した時に、“The term ‘dpapibridge’ is not recognized as the name of a cmdlet…”のエラーが表示され、ログインプロセスが終了しない。

6.9.5

2022年4月5日リリース。

機能強化

  • データソース: CSVファイルの区切り文字にat(@)、Pipe(|)、 Tab(\t)が追加されました。
  • データソース: データベース:関連する情報のみを表示するようにエラーメッセージを改善しました。
  • データラングリング: データをExcelにエクスポートする時に、日付形式を選択できるようになりました。
  • データラングリング: 日付/時間型のデータをフィルタする際に、タイムゾーンを指定できるようになりました。
  • データラングリング: 「全ての列名をきれいにする」というオペレーションに「空白の削除」のオプションが追加されました。
  • データラングリング: フィルターのメニューに「行番号を指定」のオプションを追加しました。
  • データラングリング: ceiling / floor関数に、数字をどの桁で切り上げ、切り捨てするかを指定する引数が追加されました。
  • チャート: 順序つきカテゴリ(factor)型の列を色に割り当てた場合の、デフォルトのカラーパレットをグラデーションカラーに変更しました。
  • チャート: Y軸の並び替えはチェックボックスでオン/オフの切り替えが素早くできるようになりました。
  • アナリティクス: カイ二乗検定のサマリタブに連関係数(Cramer’s V)が追加されました。
  • ノート: ワード文書にエクスポートしたときの画像の解像度が高くなりました。
  • パラメーター: フィルターにパラメーターを使用するときも、正規表現が使えるようになりました。

修正された問題

  • データソース: ノートまたはダッシュボードを開いた後に、EDFファイルをインポートできない。
  • データソース: データベース:既存のデータベースデータを更新または再インポートすると、列のデータ型が予期せず更新されてしまう。
  • データソース: Google BigQuery: BigQueryをデータソースとして使用するデータ、チャート、ダッシュボードなどをサーバー上でスケジュールすると、「標準SQLの使用」によるエラーで失敗する。
  • データソース:Excelファイルをインポートする時に、インポートダイアログ上で列のデータタイプを日付(Date)として指定したにも関わらず、日付時間型(POSIXct)の列としてインポートされる。
  • データラングリング: ステップでエラーが発生した後、別のデータフレームまたはブランチに移動すると、エラーが表示される。
  • データラングリング: アプリケーションを再起動した時に、結合のダイアログにてキーとなる列が表示されない。
  • データラングリング: 日本語Windows PCで、日付型に変換する際に「Year, Month」のオプションを使用すると、11月の日付が1月として変換されていました。
  • データラングリング: 列名の変更のダイアログで、列名に非表示のスペース文字が追加されることがある。
  • データラングリング: データをGoogleスプレッドシートにエクスポートするときに、シート名に特殊文字が含まれているとエラーが発生する。
  • データラングリング: 列ヘッダメニューから表計算を開いた後、表計算のダイアログ上で新しい列名を設定できない。
  • データラングリング: 日付 / 日付時間型の列の場合、表計算のラベルが「…からの差」であるはずが「…からの差の割合」と表示される。
  • サマリビュー: Numeric(数値)型の列の値の桁数が大きいときに”Failed to get information.”というエラーが表示される。
  • サマリビュー: 相関モードとチャートビューの移動に時間がかかる。
  • チャート: 散布図の集計あり: グループ化に「なし」を選択した状態で「繰り返し」を利用した場合、色とグループの設定のダイアログで表示される値のリストが凡例の値と一致しない。
  • チャート: 散布図の集計あり: 色に対して数値列を割り当てて「合計」などの集計関数を設定した状態でリファレンスラインを引いた際、グループ化に「色」を指定しているとリファレンスラインが正しく表示されない。
  • チャート: 散布図の集計あり: 色に数値列を割り当てた場合、並べ替えが機能しない。
  • チャート: バーチャートで色に「Y軸の値」を割り当てた場合、並べ替えは機能しない。
  • チャート: テーブルにて、ドラッグ&ドロップで列をリストの一番上に移動できない。
  • チャート: 色とグループの設定のダイアログにて、複数の項目の表示名に同じ名前を使用した場合、色の割り当てが一致しない。
  • チャート: 色とグループの設定のダイアログでハイライトされている項目が2つしかないにも関わらず、緑色のテキストには「3つの値」と表示される。
  • チャート: ノートまたはダッシュボードのプレビューを実行した直後にチャートのデータをCSVとしてエクスポートしようとするとエラーが出る。
  • チャート: 色とグループの設定のダイアログで、論理条件を設定した状態でカラーパレットにグラデーションを割り当てた場合、色の割り当てがダイアログとチャートの凡例の間で一致しませんでした。
  • チャート: 色に割り当てている列を「Y軸の値」から通常の列に切り替えるとエラーダイアログが表示される。
  • チャート: 色に「Y軸の値」を使用して論理条件を作成後、Y軸の列の割り当てを変更すると論理条件は新しい列を反映していない。
  • チャート: 色とグループの設定でグループ分けのタイプに「論理条件」を使用した際に、無効な列や演算子が表示されている。
  • チャート: パイチャート / リングチャートで値が5%未満のラベルがプロット領域に表示されない。チャートプロパティからチャートに表示するラベルのしきい値を変更できるようにしました。
  • チャート: 日付列をX軸に割り当て、X軸の「数字の短縮化」オプションをオフにした場合、軸ラベルに「,」が表示されていました。
  • チャート: 地図: 色とグループの設定でグループ分けのタイプに「なし」を選択すると、チャートの表示領域が空白になる。
  • チャート: 積み上げバーチャートの向きを横にした場合、色の順序を左から右に直しました。
  • チャート: 散布図でX軸、Y軸、色、サイズ、ラベル、繰り返しに列を割り当ててトレンドラインを使用した場合、X軸のリファレンスラインが出ない。
  • チャート: 散布図でdifftime型の列をX軸に割り当ててポップアップから詳細を表示のオプションを選択した場合、エラーが出る。
  • チャート: バーチャートのマーカーを「ライン」または「サークル」に変更しても、「積み上げ」が選択できるようになりました。
  • アナリティクス: 距離のデフォルトのカラーパレットは、正と負の値の両方を持つデータに適したものでしたが、距離を表すのには最適な選択ではありませんでした。デフォルトのカラーパレットをより適切な黄色から赤のグラデーションに変更しました。
  • アナリティクス: K-meansや主成分分析(PCA)を実行する際に、データフレームにPC1, PC2などの列名がある場合にエラーが発生する。これらの列名を変更することで問題を回避できますが、列名の変更が必要であることがわかるようにエラーメッセージを変更しました。
  • アナリティクス: 距離の使用する列にVで始まる列名が存在する場合、エラーが発生する。
  • アナリティクス: 決定木の予測タブで表示されるチャートの順序は変数重要度の順序と一致していない。
  • ノート: テーブルやナンバーチャートの下に不要なスペースが表示される。
  • ダッシュボード: ダッシュボードを開いたときに、メインウィンドウのデータフレームリストでダッシュボードで参照されているデータフレームが強調表示されない。
  • ダッシュボード: テーブルの高さが低いときに全画面表示をすると、テーブルががうまく表示されない。
  • ダッシュボード: マルチバイト文字(日本語)のダッシュボードをHTMLとしてエクスポートするとエラーがでる。
  • パブリッシュ: チームとしてパブリッシュしたアナリティクスを一度キャンセルし、再パブリッシュしすると発行されるURLが変わる。
  • パラメーター: スライダーのパラメータを設定したときに、最小値/最大値の範囲外であってもデフォルトの値が0のままになっている。
  • パラメーター: データ、チャート、アナリティクス、ノート、ダッシュボードをパブリッシュしたときに、使われているパラメーターが存在しない場合のエラーメッセージにどのパラメーターなのかという情報を追加しました。
  • 一般: Windows/Macレベルのプロキシの設定を無視して、コラボレーション・サーバーに直接接続できるオプションをプロキシの設定メニューに追加しました。
  • 一般: プロキシ・サーバーに接続できないときのエラーメッセージを改善しました。

6.9.4

2022年3月14日リリース。

機能強化

  • データラングリング: 表計算の値の編集ボタンをクリックした際に、デフォルトで「列名を指定する」のチェックがオンになるように変更されました。
  • チャート: バーチャートでマーカーをサークルまたはラインに変更すると、バー・チャート・タイプが自動的に「横並び」になるように変更されました。

修正された問題

  • チャート: パイチャートで値が5%未満の時にラベルのテキストが表示されませんでした。
  • チャート: バーチャートまたはラインチャートのX軸に日付列を割り当て、X軸の「数字の短縮化」をオフにするとX軸の軸ラベルに「,」が表示されていました。
  • ノート/ダッシュボード: ブランチデータフレームにあるチャートとアナリティクスが、チャート/アナリティクスの選択ダイアログ上に表示されませんでした。
  • ノート: テーブルやナンバーのチャートの下に余分なスペースが追加されていました。

6.9.3

2022年3月10日リリース。

修正された問題

  • データソース: テキストファイル(区切りなし)をインポートした後にデータソースのステップを開いて、別のテキストファイルを選択すると、CSVデータソースに切り替わる。
  • データラングリング: 既存のデータフレームを日本語にリネームすると、結合やマージで設定したこれらのデータフレームへの参照が壊れる。
  • データラングリング: Ggoole Sheetsへのエクスポート: 既存のシートを上書きしようとすると、リストが表示されない。
  • データラングリング: フィルタ: 「範囲内」の演算子を選択したとき、値を入力できない。
  • データラングリング: ピボット: Date/POSIXct型の列を選択できない。
  • データラングリング: 表計算:「行番号」を実行したときに行の番号順にソートされない。
  • データラングリング: 表計算: 移動計算における「ウィンドウの配置」をサポートしました。
  • データラングリング: 表計算: プレビューの行数を200行以上に変更しても反映されない。
  • データラングリング: 表計算: グループにDate型またはPOSIXct型の列を選択すると、元の列の情報が上書かれてしまう。
  • チャート: 色とグループの設定: 検索フィールドの’x’ボタンが反応しない。
  • チャート: 色とグループの設定: グループ分けのタイプに「論理条件」を選択したときに、色(グループ化)に選択した列以外の列を論理条件の対象列に選択できてしまう。
  • チャート: データに inf/-inf が含まれるとき、密度曲線が正しく描画されない。
  • チャート: Y軸に複数の列を選択した状態でハイライトを設定すると、ハイライトで設定した色が、バーチャートや凡例の先頭に表示されない。
  • チャート: Y軸の列の順番をドラッグ&ドロップで移動すると、ハイライトの対象となる列が変わってしまう。
  • チャート: 地図: サムネイルの色と、Macの地図の色が一致しない。
  • ノート: チャートの「列の数」を変更すると、各チャートの全画面表示ボタンが消えてしまう。
  • エクスポート: EPF ファイルとしてインポートしたマルチバイトのプロジェクトをエクスポートすると、処理が完了しない。

6.9.2

2022年3月4日リリース。

修正された問題

  • サマリビュー: サマリービューの計算がバージョン6.8よりも遅い。
  • データラングリング: テキストの置換のダイアログで値を入力すると、誤ったエラーが表示される。
  • チャート: ライン: Y軸にLogical型の列を選択して塗りつぶし範囲を指定したときに、範囲が表示されない。

6.9.1

2022年3月3日リリース。

修正された問題

  • データソース: データソースのステップを開き、更新のダイアログでキャンセルボタンをクリックすると、データフレームの選択が解除される。
  • チャート: 表計算: グループ化の対象が最小のグループになるようにデフォルトの設定を変更しました。

6.9.0

2022年3月3日リリース。

互換性のない修正

  • パラメーター: パラメーターを含む既存のフィルターのステップは、カスタムRステップに移行されます。

機能強化

  • データラングリング: データフレーム名にマルチバイト文字(日本語)が使用できるようになりました。
  • データラングリング: フィルターで正規表現のモードがサポートされました。
  • データラングリング: 表計算が新しいUIになり、表計算の設定が簡単にできるようになりました。
  • データラングリング: 期間(週、月、四半期、年)の最終日を取得するlast_date関数が追加されました。
  • データラングリング: 集計の値で集計関数としてカウント関数(count_rows, count_unique, count_unique_if)が追加されました。
  • データラングリング: 集計の値でSUM_IFなどの条件付き集計関数がUIとして選択できるようになりました。
  • データラングリング: 数値の切り捨て、切り上げで桁数を指定できるようになりました。
  • データラングリング: ひらがな/カタカナ、和暦/西暦、漢数時/数字、都道府県/コードの変換が追加されました。
  • データラングリング: 英数字を含む半角を全角に変換するオプションが追加されました。
  • データラングリング: 日本の休日を抽出する機能が追加されました。
  • データラングリング: 日本の住所を都道府県、市区町村、町名番地に分割する機能が追加されました。
  • データラングリング: 時系列データの差分を計算できるts_lag, ts_diff関数が追加されました。
  • チャート: 色の設定が新しいUIになり、より柔軟に色を設定できるようになりました。
  • チャート: バーチャートのY軸の集計値に対して、論理条件を作成して色を割り当てられるようになりました。
  • チャート: 地図 - 標準にて日本の市区町村レベルで可視化できるようになりました。
  • チャート: 累積合計値、差、差の割合、移動計算にてグループ化のオプションを設定できるようになりました。
  • チャート: 時系列データの場合、前の期間からの差、前の期間からの差の割合が表計算で使用できるようになりました。
  • アナリティクス: カイ二乗検定のサマリタブに連関係数(Cramer’s V)が表示されるようになりました。
  • アナリティクス: 相関のヒートマップ上の変数の順序を最適化したため、相関が高い変数の組み合わせを簡単に見つけることができるようになりました。
  • アナリティクス: 決定木の変数重要度のメソッドに予測性能(Permutation)がサポートされました。
  • アナリティクス: t検定、ウィルコクソン検定にてサマリと差のタブにベースレベルが表示されるようになりました。
  • アナリティクス: トピックモデルのドキュメントタブで単語を強調表示するトピック確率のしきい値を設定できるようになりました。
  • レポーティング:ダッシュボードとノートで特定のチャートを拡大表示できるようになりました。
  • パラメーター:数値のパラメーターに範囲を指定できる「スライダー(範囲)」がサポートされました。数値列の演算子に範囲内を使うことで、このパラメーターを呼び出すことができます。
  • パブリッシュ: インサイトをパブリッシュ、または再パブリッシュする時に、チームメンバーに通知するかどうかを選択できるようになりました。

修正された問題

  • データソース: ファイルのインポート: データソースに加えられた変更が有効であることを確認するために、データをプレビューした後にのみ更新ボタンをクリックできるようになりました。
  • データソース: Google アナリティクス: 古いバージョンで作成されたデータソースのステップを開けない。
  • データソース: Google BigQuery: 課金プロジェクトがすでに選択されていても、OAuthによる認証後にGoogle BigQuery 設定ダイアログが表示される。
  • データソース: Google BigQuery: ページサイズに関するエラーメッセージを改善しました。
  • データソース: SQL Server: MacにおけるOpenSSLライブラリの読み込みに関する既知の問題のエラーメッセージを改善しました。
  • データソース: 複数の Excel ファイルをマージするデータフレームを更新するときに、単一のExcelファイルを選択すると、データフレームが更新されない。
  • サマリビュー: 相関モード: 相関でソートをしたときの目的変数の列が最後にくるように変更しました。
  • サマリビュー: 表示する列数を切り替えたときに、処理中であることを表すスピンアイコンがすぐに表示されない。
  • データラングリング: 列の選択ダイアログ: 列の選択ステップが意図しない形で空になることを防ぐために、何らかの列を選択しているときにのみ実行ボタンがクリックできるようになりました。
  • データラングリング: ’-‘で始まるデータフレームの名前を変更したり削除することができない。
  • データラングリング: Exploratoryを再起動すると、キャッシュされたステップの前のステップでエラーが発生する。
  • データラングリング: フィルタ: Date型の列に対して、範囲内の演算子を利用すると、フィルタのダイアログが崩れる。
  • データラングリング: 関連するコネクションが存在しない場合、Rスクリプトの生成ボタンが反応しない。
  • データラングリング: フィルタ: “AND “と “OR “を表記を分かりやすくしました。
  • データラングリング: データフレームの名前を変更するときのパフォーマンスを改善しました。
  • データラングリング: 列の選択のダイアログで、長い名前の列がある場合、列名が改行されてしまう。
  • データラングリング: Windowsで、絵文字を含む名前の列を、列の選択ダイアログで選択ができない。
  • データラングリング: データフレームを選択すると、“assertion error”が発生することがありました。
  • チャート: 集計テーブルのデータをCSVファイルにエクスポートするときにデータに日本語が含まれていると “Invalid multibyte string “というエラーが発生し、エクスポートに失敗する。
  • チャート: 標準偏差などを表示するポップアップの範囲情報において’±‘の接頭辞を表示するようにしました。
  • チャート: 色(グループ化)における一意な値のチェックに表示される値の制限数を100に増やしました。
  • チャート: 地図 - 拡張: ドロップダウン内で表示される地図名が翻訳されているにもかかわらず、選択した地図の名称が翻訳されずに表示される。
  • チャート: 地図 - 標準: タイプにサークルをしたときとエリアを選択したときでポップアップに表示される情報が異なる。
  • チャート: NAがある日付列を行に選択すると、“character string is not in a standard unambiguous format” というエラーが表示され、描画に失敗する。
  • アナリティクス: 二項分類: 目的変数の列名が数値で終わっていると、ROCタブの情報が表示されない。
  • アナリティクス: トピックが数値順ではなく、アルファベット順にソートされる。
  • ダッシュボード: パラメータの実行時にデータに対するコネクションがないと、コネクションを選択するダイアログや、コネクションを作成するためのダイアログが表示されないことがありました。
  • パラメーター: パラメータを削除するとパラメーターを利用したステップの中身が、新規追加のトークンとして表示され、エラーにならない。
  • パラメーター: スライダー(範囲)の入力タイプが、正しく機能しないことがある。
  • パラメーター: パラメーターを削除すると、インサイトをパブリッシュするときにエラーとなる。
  • 一般: ウィンドウのフォーカスが外れていても、Command + R のショートカットキーが使えない。
  • 一般: リポジトリのディレクトリをするときのダイアログのタイトルを修正しました。
  • 一般: テーブルビュー: 列の名前が長いときの列の幅が短くなりました。
  • プロジェクト: プロジェクトの名前を変更すると、プロジェクトリストに重複したプロジェクト名が表示される問題を修正しました。
  • エクスポート: データソースのファイルにマルチバイト文字を含むプロジェクト(.epf)をインポートすると、“Malicious entry” エラーが表示される。

6.8.6

2022年1月31日リリース。

機能強化

  • ダッシュボード: 各行の高さをレイアウトで設定できるようになりました。
  • ノート/ダッシュボード: パラメーターの値を`@{parameter_name}`という形で表示できるようになりました。

修正された問題

  • データソース: Salesforce: OAuth が無効になると、再認証ができない。
  • データラングリング:「列名を変更」すると、「グループ化」のステップで「assertion error」が表示される。
  • データラングリング: 列を選択して列ヘッダーメニューから「列を並び替える」と、選択した列が先頭に移動する。
  • チャート: バー: 「バー・チャート・タイプ」に「積み上げ」を選択した状態で、「色(グループ化)」と「繰り返し」を選択し、プロパティの「値をプロット上に表示」に「上」を選択すると、一部のバーが完全に表示されない。
  • プロジェクト: 「チーム」としてプロジェクトをパブリッシュしても、プロジェクトの作成者がパブリッシュしたものとして、パブリッシュ・ダイアログで表示される。
  • パブリック: プロジェクトのインポート中にエラーが発生すると、プロジェクトのインポート・ダイアログのエラーが消えない。
  • パブリック: Gitのデフォルトのブランチ名に、「master」の代わりに「main」を設定していると、プロジェクトのパブリッシュに失敗することがある。

6.8.5

2022年1月22日リリース。

修正された問題

  • データラングリング: 古いバージョンのExploratoryデスクトップで作成したステップを実行すると、 “Assertion failed” というエラーが表示される。
  • チャート: サマリービューからバーチャートを作成したとき、Y軸の値の範囲がバーの最大値より短いため、一部のバーが完全に表示されない。

6.8.4

2022年1月20日リリース。

機能強化

  • データラングリング: フィルタ: 数値型の列の場合、「無限大(inf)を除く」、「無限大(inf)のみを残す」の演算子をサポートしました。
  • データラングリング: 「列に分割」と「行に分割」の区切り文字にパイプ (”|“)を追加しました。
  • データラングリング: テキストデータの加工: 正規表現のヘルプを追加しました。
  • サマリビュー: 「列を検索」で、画面に表示されていない列も検索の対象になりました。
  • チャート: レーダー: 列名のフォントサイズを設定できるようになりました。
  • ノート/ダッシュボード: パラメーターの値を ’@{param_name}’ という形で表示できるようになりました。
  • パブリッシュ: パブリッシュのダイアログに 「新しいチームを作成」ボタンを追加しました。

修正された問題

  • データソース: Amazon Aurora: CA証明書を使って接続すると、「Failed to connect: SSL connection error: No such file or directory.」というエラーが表示される。
  • データソース: Google Big Query: 設定ダイアログのメニューを改善し、データコネクションのリストから設定ダイアログを開けるようになりました。
  • データソース: Google ドライブ: 共有アイテムの場合、フォルダやファイルが表示されない。
  • データソース: Google Sheets: シート名にスラッシュが含まれる場合、シートの選択ダイアログで、シート名が途中までしか表示されない。
  • データソース: Google Sheets: プロジェクトやEDFをインポートした際、「コネクションを作成」ボタンが表示されない。
  • データソース: Google Sheets: 同じ名前のファイルが複数ある場合、ファイルの1つを選択すると、同じ名前のファイル全てが選択される。
  • データソース: Google Sheets: データソースのステップからシートを再選択すると、既存のデータフレームを更新されず、新しいデータフレームが作成される。
  • データソース: Exploratory サーバーから OAuth トークンを取得するときに表示される認証エラーの処理を改善しました。
  • データソース: ODBC: 日本語のデータが正しくインポートされない。
  • サマリビュー: ヒストグラムの下に表示される最小値が正しくない。
  • データラングリング: 「列を選択」のダイアログで、ファクター型の列が「?」というデータ型として表示される。
  • チャート: 「カテゴリの作成」で「手動」の区切りタイプを選択した際、凡例の順番がおかしい。
  • チャート: ナンバー: 選択した列の値の全てが欠損値の場合、「NaN」の代わりに 「NA」を表示するようになりました。
  • チャート: バーチャートの 「バー・チャート・タイプ」に「横並び」を選択して、「ホバー・モード」に「同じX軸上のすべての値」をすると、ポップアップの位置がずれる。
  • チャート: 「色の設定」の「不透明度」のスライダーで「0.9」を設定できない。
  • アナリティクス: ピンを移動した後に、選択していた列のデータ型を変更すると、関連する集計関数が正しく更新されない。
  • ノート: マウスのフォーカスがノートエディタの外にある場合、ノートを実行するためのショートカットキー(Command + R / Ctrl + R)が機能しない。
  • ノート: チャート/アナリティクスの選択時に、最後に選択したデータフレーム名が選ばれていない。
  • ノート: ノート/ダッシュボードでパラメータを実行しワードクラウドを更新したときにデータがない場合、「error code 127」が表示される。
  • プロジェクト: エクスポートされたプロジェクトにカスタムで作られたカラーパレットが含まれていない。
  • プロジェクト: プロジェクトを複製する際のパフォーマンスを改善しました。
  • プロジェクト: 日本語文字列を含むデータファイルを含むプロジェクトをインポートすると、“Malicious entry: _archived_project/data/…”というエラーが表示される。
  • チーム: 過去に個人でパブリッシュした後に、チームでパブリッシュしたEDFをインポートすると、チームとしてパブリッシュされたインサイトとして認識されない。
  • インストール: WindowsでVisual Studio ライブラリがない場合、Exploratoryが起動しない。

6.8.3

2021年12月31日リリース。 今回のリリースの大きなの変更点は、プロジェクトレベルでコラボレーションができるようになったことです。Exploratoryサーバーにプロジェクトをパブリッシュして、他のチームメートとプロジェクトを共有できるようになりました。

機能強化

  • コラボレーション: プロジェクトをパブリッシュして、他のチームメートと共有できるようになりました。
  • コラボレーション: パブリッシュされた他のチームメートによる変更を自身のプロジェクトに反映できるようになります。
  • コラボレーション: パブリッシュされたプロジェクトはバージョン管理されているので、過去のバージョンに復元することができます。
  • コラボレーション: チームとしてプロジェクトをパブリッシュできます。これにより、チームメンバーとのコラボレーションしやすくなります。
  • データソース: Amazon Aurora: SSL CAファイルのためのパラメーターをサポートしました。
  • データソース: Google Analytics: データをサンプルをするかどうか選択できるようになりました。
  • データソース: Google Sheets: Google Sheetsのサーバー上にあるシートを検索できるようになりました。
  • データソース: Google BigQuery: ページサイズに関するエラーメッセージを改善しました。
  • サマリビュー: 表示する列/行において、最初または最後から何列/何行を選択できるようになりました。
  • サマリビュー: 相関モード: アルファベット順にソートできるようになりました。
  • サマリビュー: 相関モード: 選択した指標に基づいてすべての列をソートし、その上で最初/最後の何列のみを表示できるようになりました。
  • テーブルビュー: 表示する列の数を選択できるようになりました。
  • データラングリング: 列の並べ替えのダイアログに特定の列を「先頭」および「最後」の動かすためのアイコンを追加しました。
  • ダッシュボード: 「指定した高さに収める」が選択された場合、ある行の高さをドラッグ&ドロップで調整した際、他の行の高さは維持されるようになりました。
  • チャート: 箱ヒゲ図で、値に’inf’を含む場合、それらの値を自動で除外するようになりました。
  • チャート: 繰り返しを選択したときに、チャートの上部に 「X軸を同期」オプションが表示されるようになりました。
  • パラメーター: ステップデータを自動的にキャッシュすることにより、サーバーでインタラクティブモードを有効にする際のパフォーマンスが向上しています。
  • パラメーター: 無効なパラメーターが使われている場合、より分かりやすいエラーメッセージが表示されます。
  • プロジェクト: プロジェクトの作成日、ファイルサイズ、現在のメモリ消費量など、より多くの情報を確認できます。
  • インストール: より直感的にインストールできるようにインストール時のUIをアップデートしました。

修正された問題

  • データソース: 2,200列のCSVファイルをインポートしたときにデータのインポートが終了しない。
  • データソース: マージされたCSV/Excelのデータソースにファイルを追加すると、最初のファイルのデータのみが表示される。
  • サマリビュー: Date(日付) 型の列で、NAが正しくカウントされない。
  • サマリビュー: 直前のステップで列名を変更すると画面が空白になる。
  • データラングリング: 列名を変更した後にサマリビューに移動すると、「Another R process running」というエラーが表示される。
  • データラングリング: フィルター: 年/月オプションが、日本語ロケールのWindowsで動作しない。
  • データラングリング: 列名を変更すると、それ以降のステップが壊れる。
  • データラングリング: マージ: 「データ・タイプを強制的にそろえる」はデフォルトでオフとなります。これはデフォルトのパフォーマンスを良くするためです。
  • データラングリング: 空の文字列を他の文字列に置き換えると処理が終了しない。
  • チャート: チャートに列を割り当て、「チャートデータをExcelでエクスポート」 オプションを選択した場合、「Another R process running」というエラーが表示される。
  • チャート: 「一意な値のチェック」のダイアログで、「これ以降、この列では一意な値のチェックをスキップする」にチェックをつけても、他の列の割り当てを更新すると、「一意な値のチェック」ダイアログが表示される。
  • チャート: レーダーチャートで、Character(文字)型の列を割り当て、プロパティから「値を標準化する」オプションを有効にすると、エラーが表示される。
  • チャート: データが NaNを含む場合、バーチャートでソートが正しく動作しない。
  • チャート: テーブルで、 “Inf”/“-Inf”が”NaN”と表示される。
  • パラメーター: パラメータ名を変更すると、「Another R process running」というエラーが表示される。
  • プロジェクト: プロジェクトを開こうとすると、「TypeError: Cannot read properties of null (reading ‘classList’) for some occasions.」と表示され、プロジェクトを開けない。
  • プロジェクト: プロジェクトリストの画面でウィンドウサイズを変更すると、プロジェクトリストに不要なスペースが表示される。
  • プロジェクト: エクスポートしたプロジェクトをインポートすると、ノートに埋め込まれた画像が含まれない。
  • 一般: ネットワークエラーのダイアログの内容を分かりやすくしました。
  • 一般: 列数の多いデータファイルをインポートする際のパフォーマンスを改善しました。
  • 一般: 一部の環境で、Let’s Encrypt SSL証明書のルートCA証明書の期限切れにより、exploratory.ioへのログインまたはOAuthのためのネットワーク接続が失敗することがありました。
  • 一般: オフライン環境での起動するとき、Windowsのホームディレクトリの名前にマルチバイト文字を含む場合、「Cannot read properties of null (reading ‘setDate’)」というエラーが表示される。

6.8.2

Released on 11/24/2021.

Bug Fixes

  • Data Source: Amazon Athena: Supported workgroup parameter.
  • Data Wrangling: After sorting numeric columns in descending order, all the values of the column became negative.
  • Dashboard: Couldn’t Re-Import and Run a Dashboard at the same time.
  • Dashboard: A dashboard panel title showed a weird text like “{data-width=100}” if a chart name contains an underscore (’_’) letter.
  • Dashboard: A dashboard panel got unexpectedly wider or narrower if a chart name contains an underscore (’_’) letter.
  • Publish: Connection info was not uploaded to the server for scheduled jobs or parameters if you had recreated the connection.
  • Installer: Improved ‘Reset R Packages’ feature to recreate the R packages folder to prevent unexpected folder permission issues.
  • Installer: Improved error messages and suggestions in case upgrading R packages failed due to a permission error while upgrading Exploratory.

6.8.1

Released on 11/18/2021.

Enhancements

  • Chart: Now you can choose to keep or remove NA values before applying a Window Calculation by the “Remove NA” checkbox in the Window Calculation dialog.

Bug Fixes

  • Data Source: Azure: When opening an Azure Data File List for the first time, the Container LOV didn’t select the first available option by default.
  • Data Source: Google Analytics: Could not select a time zone other than the system default.
  • Data Source: S3 /Google Drive/Azure: Added the ‘Create Connection’ link on the File List dialog.
  • Data Source: S3: Preview dialog did not show up after selecting a CSV file when file encoding detection failed.
  • Summary: Correlation Mode: Now logical columns also show a Correlation value if you select a numeric column to the target column.
  • Data Wrangling: ‘Remove Specified Text in Another Column’ operation failed for a column whose name has special characters or non-ASCII characters.
  • Data Wrangling: Summarize Group: On the Custom Expression editor, it didn’t suggest columns from the previous step.
  • Chart: Custom Expression Dialog: Supported Function List dialog.
  • Chart: Density Plot: Show values with a unit name (μ etc) in the hover popup.
  • Chart: Exporting chart data to an Excel file failed if you tried to overwrite an existing Excel file.
  • Chart: Heatmap: Values on the heatmap cells were incorrect if you assigned numeric values to the X or Y-Axis.
  • Chart: Number: The lower part of the main number text was truncated.
  • Analytics: Chart-related error messages should show up in the chart plot area instead of the top of the application window.
  • Installation: Installed R was not detected if Command Prompt had a problem. If this problem is detected, we show a dialog with an instruction to resolve the Command Prompt issue.
  • Installation: Upgrading to Exploratory Desktop 6.8.0 failed with an error “w[1].version_command.unshift is not a function” if custom R location was specified.

6.8.0

Released on 11/11/2021.

Enhancements

  • Data Source: Google Drive / Amazon S3: Now it remembers the last 20 visited folders.
  • Data Source: Supported Azure Storage Blob / Data Lake for CSV, Excel, and Parquet files.
  • Data Source: Supported MS Access Data Source.
  • Data Source: Supported Parquet files as one of the local file data sources.
  • Data Source: Supported Parquet files for Amazon S3 Data Source.
  • Data Wrangling: Filter: Supported ‘Keep NA’ option for Date and Numeric column filter operations.
  • Data Wrangling: impute_na function can now fill NA with the mode of the column.
  • Data Wrangling: Supported “Remove Alphabet” and “Remove URL” parameters to the Tokenize Text step dialog.
  • Data Wrangling: Supported “Group by” for the TF-IDF Step.
  • Data Wrangling: Supported exporting step data, chart data, and analytics data as a Parquet file.
  • Data Wrangling: Supported sum_if, count_if, mean_if, median_if, max_if, and min_if functions.
  • Data Wrangling: Text Wrangling: Supported an option to remove/replace/extract specified text in another column.
  • Chart: Map: The World Map (Pacific Ocean centered) support.
  • Chart: Now you can show the grand total in Table.
  • Chart: Number: Now the caption text shows in multiple lines if it is long.
  • Chart: Pivot: Summarize Table: Now you can configure how to handle NA values from the Missing Value Handling setting.
  • Chart: Radar chart support.
  • Chart: Supported Y-axis columns reorder by drag and drop.
  • Analytics: Added the option to remove alphabet words at text tokenization by Tokenize Text Step.
  • Analytics: Added the option to remove alphabet words at text tokenization in Word Count and Topic Model Analytics View.
  • Analytics: Factor Analysis: The Communality column was added to the Weight table.
  • Analytics: Factor Analysis: You can now specify a categorical variable to look into its relationship with the discovered factors with the new Radar chart and Path chart.
  • Analytics: K-Means: You can now specify a categorical variable to look into its relationship with the discovered clusters with the new Radar chart and the Path chart as well as the existing Stack Bar chart.
  • Analytics: Now you can change the sort direction of Bar charts from the chart property dialog.
  • Analytics: Now you can customize the Network chart in the Market Basket analysis from the chart property dialog.
  • Analytics: Now you can customize the Network chart in the Word Count analysis from the chart property dialog.
  • Analytics: Now you can customize the Tree chart in the Decision Tree analysis from the chart property dialog.
  • Analytics: Time Series Clustering: Added Elbow Method mode to determine the optimal number of clusters.
  • Analytics: Topic Model: Words in the documents are now colored based on the most likely topic that the word belongs to.
  • Analytics: Topic Model: You can now specify a categorical variable to look into its relationship with the discovered topics and important words of the topics with the new Path chart and Stacked Bar charts.
  • Dashboard: Note: Now you can show/hide the Repeat-By controls in charts from the property dialog.
  • Parameter: Supported cache option for dynamic LOV result.
  • Parameter: Supported the option to show all the available items for dynamic LOV.

Bug Fixes

  • Data Source: Amazon S3: Import and merge files fails for some directories.
  • Data Source: CSV: The file selection dialog height didn’t change dynamically when the App’s window size increased.
  • Data Source: Excel Import and Merge: Improved the error message when duplicated column names were detected.
  • Data Source: Excel Import and Merge: Improved the error message when sheet names in the selected files were not all the same case.
  • Data Source: Excel: Data type convert didn’t work after re-selecting a sheet other than the one originally specified in the Excel data.
  • Data Source: Improved performance for previewing multiple CSV/Excel/Parquet files import and merge cases.
  • Data Source: MS SQL Server: Relabeled and reordered ODBC drivers shown in the List of Values to make it less confusing.
  • Data Source: ODBC Data Source: Stopped blindly escaping non-ASCII table names to avoid SQL syntax becoming invalid.
  • Data Source: Remote Excel: After changing a remote Excel file URL, the associated Sheet Name was not properly updated.
  • Data Source: Twitter: Now you can use LOV for Language parameters.
  • Data Source: When creating a new data frame while the source step was selected on the Chart View, the newly created data frame was not displayed on the data frame list.
  • Data Source: When importing Stats (SPSS/SAS/Stata) files, imported column data types were incorrect when the columns were labeled.
  • Data Wrangling: In the expression editor, column names highlighting didn’t work if a name contains both alphabet and Japanese characters.
  • Data Wrangling: Column Menu: ‘Convert Excel numeric to Date Type’ didn’t work when multiple columns were selected.
  • Data Wrangling: The help link for the Predict with Analytics dialog didn’t work.
  • Data Wrangling: The help link for the Sample Step dialog didn’t work.
  • Data Wrangling: On Analytics View, the data frame comment icon position was incorrect after collapsing and expanding the right-hand side steps.
  • Data Wrangling: On Create Calculation for Multiple Columns dialog, the Function List dialog didn’t show up when clicking the Function List link.
  • Data Wrangling: On Summary View, when a selected step was grouped, the ‘Search Columns’ label overlapped with the ‘Correlation’ button.
  • Data Wrangling: On the Create Calculation for Multiple Columns dialog, the label for Window Calculation was truncated.
  • Data Wrangling: Recode: the ”# of unique” value label was placed way below the table when there were very few rows.
  • Data Wrangling: Summarize Group: Custom Expression Editor didn’t have the link to open the Function List dialog.
  • Data Wrangling: There was a case that already deleted data frames kept showing in the data frame list and clicking the data frame threw an Error.
  • Data Wrangling: When deleting a branch data frame, it showed an error TypeError: Cannot read property ‘getId’ of null for some occasion.
  • Data Wrangling: When deleting a data frame, the parquet file used for data caching of the source step was left without getting removed.
  • Data Wrangling: When selecting a data frame on the data frame list, ‘Error : dagops.members() dataframe does not exist’ raised for some occasion.
  • Data Wrangling: When updating a source step, Cannot read property ‘cache’ of undefined error is raised for some occasion.
  • Chart: ‘Show detail’ didn’t show filtered data when the chart had disabled chart filters.
  • Chart: Export data to Google Sheets failed with ‘Cannot read properties of null’ error.
  • Chart: Exporting the chart data to Excel failed with an “invalid multibyte string” error if the data contained Japanese.
  • Chart: If I hovered the first box from the left on a Boxplot chart, it showed hover balloons for multiple boxes.
  • Chart: If the order of the X-axis was reversed, the X-axis range setting was ignored.
  • Chart: Pivot failed to render if you assigned a date column to the Column and chose “Day of Month” in the formatting dialog.
  • Chart: Pivot: Summarize Table: Referring to a column in the Value in the URL formatting for a column in the Row didn’t work.
  • Chart: Pivot: The hover pop-up didn’t show the display name defined in the formatting dialog.
  • Chart: Summarize Table: The “Show Bars on Background” option didn’t show up for a character column with a “Unique Count” function assigned to the Value.
  • Chart: Table: The header text didn’t show fully once in a while even though the text was short.
  • Chart: Value text on the plot area didn’t align with bars if you used a Color with highlight.
  • Chart: Word Cloud failed to render if you assigned a factor column to Color and chose a “Unique Count” function.
  • Analytics: Chart Property dialog should always show the color properties even if no color is used in the chart.
  • Analytics: Improved property menu for Market Basket Analysis to prevent unnecessary value set for ‘Minimum Support Value’ when ‘Auto’ is set for ‘Minimum Support”.
  • Analytics: Survival Curve: Row number shown in the Summary was larger than the actual value by 1.
  • Analytics: The zero line for the Y-Axis didn’t show in the Probability chart in the Random Forest analytics.
  • Analytics: Topic Model / Word Count: Added mouse hover popup help on “Clean Up Twitter Data” menu.
  • Analytics: When moving to a different Analytics Tab, unnecessary file save happened and it slowed the navigation.
  • Analytics: Word Count: Word Count Analytics View failed to run when there was no co-occurrence.
  • Analytics: Y-Axis direction was flipped if you uncheck the “Sync Y-Axis” checkbox in the Prediction chart in the Random Forest analytics.
  • Note: When adding a chart to a note, now it inserts a new line break before the code so that the generated document can show the header section properly.
  • Publish: Error “Cannot read property ‘getName’ of undefined” raised when publishing an Analytics with Weather Data and the Weather Data extension was not installed.
  • Schedule: There were cases where scheduled jobs failed due to unnecessary type conversion on uploaded file data.
  • Installation: When Git and R download failed due to the proxy server blocking the download request, an error message didn’t show up for some occasions.
  • Installation: When Rserve installation failed, the error message didn’t show a full path of failed file
  • Installation: Windows: R under Documents/R/R-4.1.0 under the home directory was not properly detected and used.
  • Public: ‘Download’ button on the ‘New version available’ dialog was not linked to the Public Edition download page.
  • R Package Upgrade for 6.8.

6.7.4 (Mac Only)

Released on 10/30/2021.

Bug Fixes

  • General: Exploratory Desktop did not start up on macOS Monterey.

6.7.3

Released on 9/29/2021.

Bug Fixes

  • General: When trying to generate an Offline License Key from Exploratory Desktop, it showed ‘Offline license key is supported only for Business plan’ error even if your plan was Business Plan.
  • Installation: Download of Git and/or R failed.

6.7.2

Released on 9/28/2021.

Enhancements

  • Chart: Now, you can create a range by specifying upper and lower values manually using the “Specific Value” option in the Line chart.
  • Chart: Now, you can fill the Reference Line range with color.
  • Data Source: Amazon Athena: Supported additional parameters input field to enter any supported ODBC parameters.
  • Data Source: Amazon Athena: Supported VPC Endpoint parameter.
  • Data Source: Google Drive: Supported importing files from a Share Folder.
  • Data Wrangling: Work with Text Data: Supported “Remove Text Before/After Specified Character”, “Replace Text Before/After Specified Character”, and “Extract Text Before/After Specified Character”,
  • General: Supported self service Offline License Key generation for users with Business Plan.

Bug Fixes

  • Analytics: Correlation: Result of “Correlations” heatmap or “Significance: scatter plot with “Lower Triangle Only” option did not fit in the lower triangle.
  • Analytics: The “Words - Count” chart in Word Count Analytics failed to render and showed “Invalid argument was passed to returnsNumericValue” error.
  • Chart: It showed fewer dots if you set the Trend Line in the Scatter chart.
  • Chart: Reference Line range values in the 2nd Repeat By was incorrect if you used the “Repeat by Y-Axis Columns” feature.
  • Chart: Table failed to render and showed an error dialog if the data frame had row names.
  • Dashboard: Dashboard didn’t show more than 6 Numbers in a row even if you could add more than 6 Numbers at the design time.
  • Data Source: Amazon S3: Files from a child folder was listed on the parent folder.
  • Data Source: Amazon S3: When merging multiple csv files as a single data frame, files from a sub-folder were included mistakenly.
  • Data Source: Amazon S3: When selecting an empty bucket, the spin icon didn’t go away.
  • Data Source: ODBC: Japanese Tables names got garbled for MS SQL Server in the Schema list.
  • Data Source: SQL Server, when a SQL query failed, it showed clearDBConnection failed message.
  • Data Source: Treasure Data Connection: API Key input field was not displayed for Treasure Data Connection dialog.
  • Data Wrangling: Caching a grouped step threw error “x must be an object of class ‘data.frame’, ‘RecordBatch’, or ‘Table’, not ‘arrow_dplyr_query’”.
  • Data Wrangling: Summarize Group: When using a column that is already assigned to Group Columns as a value column, column name was overridden.
  • Export: Error ‘Cannot convert undefined or null to object’ was raised from exporting a Dashboard or Note as an EDF file when a database connection missed in the project was used.
  • Export: Error ‘Command failed: zip -q -r “edf.zip” “note_content\note.html”’ was raised when publishing or exporting a Dashboard or Note from a repository on a network drive.
  • Export: Publishing or exporting an Insight hanged if your home directory was on a network drive.
  • Export: Publish dialog didn’t open when the PC was offline.
  • Installation: Error about installing Rserve R package was raised at installation if an installer dmg file for a wrong type of Mac (Intel or M1) was used.

6.7.1

Released on 8/31/2021.

Enhancements

  • Chart: Now you can set the Scale option when you export the chart as an image file in order to export the image in a higher resolution.
  • Chart: We have added “Missing Value Handling” support for Bar, Area, and Scatter (With Aggregation) chart types.
  • Data Source: CSV / Excel: Now you will see a list of the last 10 used folders when you choose the folder.
  • Data Source: JSON: Now the “Export Data as JSON” option export the data in a nested data structure if the data frame contains list columns.
  • Data Source: MongoDB: Now you can use your SSL client certificate for the connection.
  • Data Wrangling: Added ‘Email’ for the ‘Work with URL’ menu in the column header menu.
  • Data Wrangling: Added the ‘unnest’ command to the column header menu so that it can ‘unnest’ the nested list columns easily.
  • Data Wrangling: Now the values for the true_value argument of str_logical function are suggested in Create Calculation (mutate) dialog.

Bug Fixes

  • Data Source: Google Analytics: After upgrading to Exploratory Desktop 6.7.0, updating an existing Google Analytics Data Source threw Time Zone not set error.
  • Data Source: MariaDB/MySQL: Connection failed when timezone was not properly set up on the Database server.
  • Data Source: ODBC: On the “Add New Connection” dialog, the dropdown for the DSN list was empty when the dialog was opened for the first time right after the installation.
  • Summary View: When adding a new step on Summary View, the spin message didn’t show the step name and just said “Calculating Summary Info”.
  • Data Wrangling: Mutate Multiple Columns: When using special characters for Suffix, it showed an unmatched parenthesis error.
  • Chart: The “Cumulative Sum” Window Calculation didn’t work properly if there were NA values in the summarized data in the Line chart.
  • Chart: If numeric values on X-Axis were derived from a Date or POSIXct column such as the “Month Number” function, the “Fill with NA” Missing Value Handling option should complete the missing numbers and fill NAs for values.
  • Chart: Exported chart data didn’t contain columns using the “As Category” column function.
  • Chart: Pivot Table failed to render and threw “Cannot read property ‘url’ of undefined’ if you assigned multiple columns to Value and removed the first one.
  • Analytics: Correlation: You couldn’t open an Excel file created by the “Export Table Data as Excel” feature in the Data tab if you had Japanese characters in the data and column names on Windows.
  • Parameter: When moving a slider to the far end, it kept sliding even after releasing the mouse.
  • Export: EDF/DF file export failed if exported Chart(s) had a long name.
  • Export: Project export failed if the path or file name included multibyte characters.
  • General: If project export failed in the middle, a directory named “_archived_project” was left in the project directory, and it looked like an additional project on the project list screen.

6.7.0

Released on 8/19/2021.

Enhancements

  • Data Source: Excel: Now you can import macro-enabled Excel files that use the .xlsm file extension.
  • Data Source: Google Analytics: Now you can view POSIXct column data in a time zone other than the one set in Google Analytics.
  • Data Source: Google Analytics: Supported ‘Between’ Date Filter Operation.
  • Data Source: Google Analytics: Supported Google Analytics V4.
  • DataFrame: Supported “Add Comments” for Data Frames.
  • Data Wrangling: Filter: Supported ‘Contain this string (multiple)’ operator.
  • Data Wrangling: Keep Unique Rows: Supported ‘All Columns’ option and Improve the UI.
  • Data Wrangling: Supported ‘Leave Original Column’ option for the ‘Mutate with Multiple Columns’.
  • Data Wrangling: Supported ‘years_between’, ‘months_between’, ‘weeks_betwen’, and ‘days_between’ functions for Date and POSIXct columns and ‘hours_between’, ‘minutes_between’, and ‘seconds_between’ for POSIXct columns.
  • Data Wrangling: Supported the option to remove extra spaces in text wrangling dialog.
  • Chart: Highlight: Now you can choose the position of the highlighted colors either top or bottom in the Stacked Bar and Area chart.
  • Chart: Now the sort is applied within each chart if you use Repeat By.
  • Chart: Now you can quickly access the Trend Line and Reference Line configurations from the information green text.
  • Chart: Now you can quickly remove the column configuration such as Window Calculation, Limit, Other Group, and others by clicking the ‘x’ button at the information green text.
  • Chart: Pivot Table: Now you can assign multiple columns to the Value and a column to the Column at a time.
  • Chart: Pivot Table: Now you can do the column formatting in the same way as you do in the Summarize Table.
  • Chart: Pivot Table: Summarize Table: Now you can show the text in multiple lines in cells by the “Text Wrap” option in the Format Column dialog.
  • Chart: Pivot Table: Summarize Table: Table: Now you can fit the table width to the Chart view area by the “Fit to Screen” option in the chart property dialog.
  • Analytics: “Text Clustering by Topic Model” Analytics View is added.
  • Analytics: Correlation: In the Data tab, now we show t-value along with P-value if the method is Pearson
  • Analytics: Factor Analysis: Now the sum of squared loadings (SS loadings) is shown on the hover popup of the Factor Importance bar chart.
  • Analytics: K-Means: Added Summary tab that shows the summary of each cluster, such as cluster center and the number of rows belonging to it.
  • Analytics: K-Means: Now the stack bar chart hover popup shows the number of rows.
  • Analytics: Text analytics features (Tokenize Text Step, Word Count Analytics View, and Topic Model Analytics View) now have the “Clean Up Twitter Data” option for tokenizing, which removes mentions and hashtags.
  • Analytics: Word Cloud, Topic Model: Now you can eliminate specific words from the default stopwords.
  • Analytics: Word Count: Now network clustering is applied to the co-occurrence network, and displayed by colors.
  • Analytics: Word Count: Now you can specify a minimum count of words to be displayed in the word cloud.

Bug Fixes

  • Data Source: Brought back ‘ODBC (Legacy)’ data source to support databases such as Teradata and Kintone.
  • Data Source: Error “object exp.file.id not found” was raised if the directory for the CSV, Excel files had been removed. Now we show a message that explains this kind of situation better, including similar cases for files on AWS S3 or Google Drive.
  • Data Source: File Data Source: Importing a file failed with the ‘URIError: URI malformed’ error when the file name contains certain special characters.
  • Data Source: Google BigQuery: Improved error message when columns in a SQL query did not exist.
  • Data Source: Google Drive: Switching from “all” mode to “select files” mode thrown ‘The “path” argument must be of type string.’ error.
  • Data Source: Multiple CSV files: When guessed file encoding was incorrect, it only imported the first file and ignored the rest after the error was recovered.
  • Data Source: Now ODBC data source honors the user’s timezone for POSIXct column data.
  • Data Source: Now you can change column data types on the CSV/Excel file import dialog.
  • Data Source: SQL: When a table name starts with a number of other special characters, now it generates a SQL that wraps the table name with a quote string to make the SQL syntax valid.
  • Data Source: Supported FRED (FRB Economic Data) as a cloud apps data source.
  • Data Source: Switching from a CSV data source to a Google BigQuery data source didn’t work.
  • Data Source: Switching from a multi CSV files data source to a single CSV file data source didn’t work.
  • Data Source: Teradata: it didn’t show schema information properly.
  • Data Source: When new columns were added to a file, these new columns were not selected when opening the Update data source dialog.
  • Summary View: A blank screen showed up if you removed a column from a data frame that had more than 300 columns.
  • Summary View: Correlation mode: Linear regression prediction lines were not straight.
  • Summary View: When a join step was selected, the Correlation mode didn’t refresh even after changing the target column.
  • Data Wrangling: “Add Column Suffix” option was not shown for Inner Join.
  • Data Wrangling: Added “unit” to the formula for floor_date function.
  • Data Wrangling: After closing a project with the right-hand-side step list collapsed, re-opening the project showed the incorrect step collapse icon.
  • Data Wrangling: After copying a folder, branches in a data frame in the folder were not displayed.
  • Data Wrangling: Alignment of the Window top became broken after selecting columns for K-means step dialog.
  • Data Wrangling: Changed to include step number in a spin message when a step is executed.
  • Data Wrangling: Changed to use impute_na for filling missing value with specific value operation.
  • Data Wrangling: Duplicating a data frame with a “Predict with Model (Analytics View)” step raised an error.
  • Data Wrangling: Failed to replace NA with the other value “Replace NA… with specific value” menu if the target column is a factor.
  • Data Wrangling: Filter: Added an example to the Year / Month option label.
  • Data Wrangling: Now Filter dialog honors the user’s timezone when the ‘Between Date’ operator is used.
  • Data Wrangling: Now the syntax suggestion for mutate operation is shown in Japanese when UI language is Japanese.
  • Data Wrangling: On the Chart View, when running a step, it shows ‘length’ of undefined error for some occasions.
  • Data Wrangling: On Tokenize Text dialog, changing the “With Sentence ID” parameter did not change the selected value.
  • Data Wrangling: Table View showed a blank UI when underlying metadata was corrupted.
  • Data Wrangling: Text Wrangling: Removing last words failed if the text contained special characters.
  • Data Wrangling: When navigating from Table view to Chart view while the Table Filter dialog was open, the Filter dialog did not close automatically.
  • Chart: Bar chart failed to render with the “Problem with mutate() column c2.sortval” error if you had ”% of” window function, sort setting, and Limit with a condition that removed all the data.
  • Chart: Bar: Values on the plot area didn’t align with bars if you used the Highlight feature.
  • Chart: Checking the “Sync X Axis” checkbox didn’t sync the X Axis in the Line chart.
  • Chart: Highlight: Highlighted colors did not come up at the top in Area and Pie/Ring charts.
  • Chart: If you typed in ‘1’ for the “Number of Categories” in the Category Setting dialog, it became ‘2’ automatically.
  • Chart: Line chart failed to render and showed an error “argument “df1” is missing, with no default”.
  • Chart: Pivot Table failed to render if you selected the Quantile aggregation function against the data with all NA values.
  • Chart: Pivot Table: “NaN” text shouldn’t show up in the value cells. It should show empty cells instead.
  • Chart: Pivot Table: Summarize Table: Date formatting support.
  • Chart: Pivot Table: Summarize Table: It didn’t show the total values correctly if you used a Custom Calculation and set the “Before Aggregation” option for the calculation timing setting.
  • Chart: Pivot Table: Summarize Table: The hover Pop-up got too wide if there was a long text in there.
  • Chart: Pivot Table: The Color Visual Formatting didn’t work if you used a Custom Calculation that generated text output at the Value.
  • Chart: Pivot Table: The table border shouldn’t show in the table header cells if you specify a background color in the Visual Formatting setting.
  • Chart: Pivot Table: Values from a hidden Row column shouldn’t show up in the Pop-up.
  • Chart: The “Color Direction” option should be removed from the “Conditional Formatting” Visual Formatting.
  • Chart: The “Hide Value Cells” option was missing in the Pivot Table.
  • Chart: The “There is no data to display” message in the Chart view was not translated into Japanese.
  • Chart: The Repeat By order was incorrect if you selected more than 10 columns at Y-Axis and used the “Repeat By Y-Axis Columns” feature.
  • Chart: Unchecking the “Sync X Axis” checkbox didn’t unsync the X-Axis in Error Bar (Summarized Data).
  • Chart: Values on plot area didn’t align if there were missing values in the Line chart.
  • Chart: Word Cloud failed to render and showed a “Cannot read property ‘match’ of undefined” error.
  • Chart: Word Cloud failed to render and showed an “invalid printing width” error.
  • Analytics: After moving an Analytics tab by drag and drop, the spin icon didn’t go away.
  • Analytics: After renaming a duplicated analytics, clicking another analytics tab ended up reverting name change.
  • Analytics: Analytics was mistakenly executed by deleting an unfinished filter condition.
  • Analytics: ARIMA: An error “Names must be unique. These names are duplicated” was raised if you assigned a column with the name “y” as the Value column.
  • Analytics: ARIMA: For some cases, only models without constant terms were searched as candidates of the model.
  • Analytics: ARIMA: NA handling in an aggregation of data for each time period is improved.
  • Analytics: Correlation, Distance: Now the column orders in the heatmap are ordered in the same way between Mac and Windows.
  • Analytics: Correlation: Checking the “Show Correlation Values” checkbox didn’t show the correlation values on the plot area.
  • Analytics: Cox Regression, Survival Forest: Now a unit of the period is indicated in the status text for the Survival Curve chart.
  • Analytics: Cox Regression, Survival Forest: The prediction period is now shown in the status text for the Prediction chart.
  • Analytics: Emoji removal is improved, and some of the emoji we could not remove before can be removed now.
  • Analytics: Exporting the Word Cloud data should be enabled in the Text Analysis.
  • Analytics: K-Means: If there is a column with only NAs, we remove that column from the input automatically so that the analysis can go on with the rest of the columns.
  • Analytics: Multicollinearity (VIF) bar charts when used with repeat-by groups are now sorted properly by the VIF value for each repeat-by group.
  • Analytics: PCA: Pivot Table columns in the Weight tab were partially translated.
  • Analytics: PCA/Factor Analysis: A column selected at the Color By was reset if you switched the Analytics type from PCA to Factor Analysis.
  • Analytics: Prophet: Data that is just 2-year long was not processed with yearly seasonality by default. We adjusted the criteria of the automatic switch of yearly seasonality so that such data is processed with yearly seasonality by default.
  • Analytics: Revised default Japanese stopword list to avoid unwanted removal of potentially important words.
  • Analytics: Row number for the basis of power analysis was counting rows with NAs too. Now we filter NAs before counting rows for power analysis.
  • Analytics: Statistical Test: Now, when a repeat-by group is used and some of the groups got errors running the test, the errors are reported on the Note column of the Summary table, rather than blocking tests for all other repeat-by groups.
  • Analytics: Statistical Tests: Improved error messages that are shown when no data or only 1 row is left after removing NAs.
  • Analytics: Survival Curve: Error “Cannot read property ‘getColumns’ of undefined” showed up when a numeric column was assigned to Color.
  • Analytics: Survival Curve: You should be able to assign the same column to both Cohort and Start Date.
  • Analytics: The Data tab in the Chi-Square Test failed to render and showed a “Cannot read property ‘column’ of undefined” error.
  • Analytics: The Network chart didn’t use the full chart viewing area after opening the full-screen view.
  • Analytics: The number of decimal digits setting didn’t work in Summary or Coef Table tabs in Analytics.
  • Analytics: Time Series Clustering: Many of the combinations of Cluster Center Method and Distance Method raised errors.
  • Analytics: Tokenization done by Analytics View and Step now gives the same result.
  • Analytics: Variable importance bar charts (including the box plot for Boruta for Random Forest) when used with repeat-by groups are now sorted by the importance of variables properly for each repeat-by group.
  • Analytics: When navigating between a branch data frame and the parent data frame, a blank screen was shown after a branch data frame failed to execute.
  • Analytics: Wilcoxon Test, Kruskal-Wallis Test: Misleading the “MEAN” label for the Value column is removed.
  • Analytics: Word Count: Added random seed so that co-occurrence network result is stable.
  • Analytics: Word Count: The layout algorithm for the co-occurrence network is improved, and made more adjustable.
  • Parameter: After clicking the parameter icon, Parameter UI was not displayed when there was a parameter that refers to a missing data frame.
  • Note: Corrected popup text for “quote” icon in toolbar.
  • Note: There were cases where embedding of Chart in Note did not work because the generated chart referencing tags were malformatted.
  • Slide: Disable the Slide feature.
  • Dashboard: Changed to set bigger default row height when adding a new row.
  • Dashboard: When opening a dashboard, the previously opened dashboard was displayed before it showed the selected dashboard.
  • Dashboard: When stopping publishing a dashboard, it generated output and captured thumbnails where it shouldn’t.
  • Dashboard/Note: Added the ‘Export’ button to the catalog tree menu from where users can download an EDF file.
  • Export: Now the chart thumbnails are shown from right after importing the EDF file or .df file.
  • Export: Project export from a repository on a network drive such as Google Drive consumed a lot of memory.
  • Export: When exporting a chart as EDF, it showed an error dialog when the chart uses a Parameter that refers to a missing Data Frame.
  • Project: When clicking the Update button for project rename, it did not respond for some project.
  • Project: When renaming a project to an existing conflicting name, the Update Name dialog showed an error but the project name on the list was updated with the duplicated name.
  • Install: Intel Mac run on a virtual machine environment was mistakenly considered to be an M1 Mac by the installer of Exploratory.
  • Installation: Improved error message when package installation failed.
  • Installation: When selecting a folder for Exploratory Repsotiory, it now validates the write permission on the folder and shows an error message if the user does not have the permission.
  • Installer: Git installed with Exploratory is upgraded to the latest 2.33.0 (Windows) and 2.32.0 (Mac).
  • Installer: Rcpp package installed with Exploratory is upgraded to the latest 1.0.7. This should resolve some of the problems in installing custom R packages from CRAN that worked only with this version of Rcpp.
  • General: If a double-quote was used in the password, login was required each time Exploratory Desktop was started.
  • General: Performance of loading or updating data on Windows was slower than it should have been because of a workaround we did around writing data to a parquet file for caching of data. Now the root issue with Parquet is fixed and we removed the work-around that was causing performance degradation.
  • General: When an incorrect password is used at the login UI, it showed an unrelated error dialog.
  • General: When exporting a Project as a zip file, it didn’t show a spin icon and could not tell when the operation finished.
  • Generic: When clicking open Publish Dialog, it didn’t show any error message when the Exploratory Desktop was offline.

6.6.3

Released on 6/24/2021.

Enhancements

  • Data Wrangling: Summarize Group: Supported Min and Max for Character Columns aggregation function.
  • Analytics: Text Analysis: Added “Words - Data” tab that shows and allows export of tokenized text data.
  • Dashboard: Maps in the Dashboard now remember the zoom level and center position if you update Maps in the Dashboard preview.

Bug Fixes

  • Data Source: Amazon S3/Google Drive: Changing file selection on Import Data Dialog showed there was another R running error.
  • Data Source: Clicking the Parameter link on the R Script Data Frame dialog did not respond.
  • Data Source: CSV/Excel Files: The file list is now sorted by Date Modified Column.
  • Data Source: Google Analytics: It failed to load data when the ‘Goal 8 Completion’ measure was selected.
  • Data Source: Google Analytics: View ID didn’t have the required prefix and failed to load data for some occasion.
  • Data Source: Importing Remote CSV failed and showed another R process running error.
  • Data Source: Remote CSV File: After changing the URL, clicking the Run button did not refresh the preview table.
  • Data Source: Remote CSV File: Failed to load data when loading took more than 60 seconds.
  • Data Source: Salesforce icon on OAuth Dialog was squashed.
  • Data Source: When trying to import multiple CSV files with the “All” or “Conditions” option, changing the “Skip first N rows” parameter did not work.
  • Data Wrangling: Filter: If a filter step had only one token and was disabled, there was no way to enable the token back.
  • Data Wrangling: Right hand-side step showed an empty screen for some occasion.
  • Data Wrangling: System-Level Timezone was not reflecting on data wrangling steps.
  • Chart: After reordering chart tabs by drag and drop, chart tabs order was not retained when the App was restarted.
  • Chart: Pivot Table: Column names in the exported CSV data didn’t follow the display names defined in the Chart Property dialog.
  • Analytics: Factor Analysis: Using factoring method other than Minimum Residual did not work with the error message “Column MR1 doesn’t exist.”.
  • Analytics: Rendering of the Prediction chart in the Random Forest Analytics was very slow if you selected character columns as Predictor Variables.
  • Analytics: Text Analysis: Error was raised if the input text column had NAs. Now we automatically filter out NA rows.
  • General: Error Report Dialog showed up when shutting down Exploratory after exporting a project.
  • General: NANO-Antivirus reported a false alarm with the previous release (6.6.2.3) of the Windows version.
  • General: The keyword clear button (“x” button) in the search input field should show up only if there is a keyword.

6.6.2

Released on 6/15/2021.

Enhancements

  • Data Source: Google BigQuery: Supported Page Size on the Google BigQuery Setup dialog. And now you can import the full result from a SQL query with many columns by setting a small number to the page size.
  • Analytics: Factor Analysis: Now X/Y axis labels of the biplot show the percentage of variances the factors can explain.
  • Analytics: Text Analysis: Now, “Words To Be Treated As One Word” does not need to be specified with separating spaces for languages like Japanese, which are without word-separating spaces.
  • Analytics: Factor Analysis: Added Summary tab that shows info such as the significance of the factor analysis.

Bug Fixes

  • Data Source: Google BigQuery: Clicking BigQuery icon on the Database Data Source dialog showed ‘Error: Not found Dataset’ when the selected billing project does not have any dataset.
  • Data Source: MongoDB: Improved error message for SSL issue with Mongo Atlas connection.
  • Data Source: ODBC: Could not add a new ODBC connection.
  • Data Source: Salesforce SQL: When selecting a table from the schema tree, now it inserts the table name to the query editor.
  • Data Source: Salesforce: Improved error message for the case where the user did not have the Modify Metadata permission.
  • Data Source: Salesforce: Improved UI by switching Filter and Run button positions.
  • Summary View: The download button and configuration button overlapped each other in the Correlation toolbar.
  • Chart: If you exported chart data with reference lines to the CSV file, internal column names were shown up for the reference line data.
  • Chart: Table search performance improvement.
  • Chart/Analytics: The property dialog didn’t close when you moved to a different view such as the Summary view or closed the project.
  • Analytics: Clicking outside the property dialog shouldn’t close the dialog.
  • Analytics: Correlation: Error “f must be a factor (or character vector).” was raised if the names of all the input columns are numbers.
  • Analytics: Time Series Clustering: Error “There are missing values in the series” was raised if one or more of the time series were constant.
  • Note: Chart failed to render if the chart name contained special characters such as ”‗” on Windows.
  • Dashboard: Improved UI by aligning row height between runtime and design time.
  • Dashboard: Left and right margins were uneven in the preview screen.
  • Dashboard: Set Height Evenly Button overlapped with Published Icon.
  • Dashboard: When in Fit to Screen Mode, adding a new row pushed the page down and it overflowed vertically.
  • Dashboard: When switching from ‘Fit to Screen’ mode to ‘Fit Within the Specified Height’ mode, row height unexpectedly changed where it should keep the same height.
  • Installation: R: Improved Installation UI and now it shows CPU architecture name along with R version.

6.6.1

Released on 6/10/2021.

Enhancements

  • Data Source: Supported Salesforce Data Source.
  • Data Source: Now you can search tables in Database Import Dialog.
  • Summary View: Now you can choose which algorithm to use for the Correlation mode. 2 new algorithms (Decision Tree and Random Forest) are added.
  • Summary View: Now you can export the Summary View data in the CSV and Excel format.
  • Data Wrangling: Supported the date picker on the Filter dialog.
  • Chart: Now you can create an Error Bar with the summarized data.
  • Chart: Analytics: Supported ‘Export to Google Sheets’ option in the Chart/Analytics export menu.
  • Chart: Now you can change the circle size and line width in the Error Bar.
  • Chart: Now you can draw Reference Lines for each color.
  • Chart: Now you can search the content in the Table from the toolbar.
  • Analytics: Added a new Factor Analysis Analytics View.
  • Analytics: Added new Text Analysis Analytics View with word cloud and co-occurrence network.
  • Dashboard: Supported the option to set row height equally.

Bug Fixes

  • Data Source: At EDF import, if the creation of a missing connection was canceled, the Summary View was not refreshed with newly imported data.
  • Data Source: Athena: Switched to use odbc package instead of RODBC package.
  • Data Source: CSV and Excel files were not shown when the file extension was the upper case.
  • Data Source: Deprecated the Dremio data source.
  • Data Source: Google BigQuery: Supported datasets search feature on the import dialog.
  • Data Source: Google BigQuery: When updating or refreshing a data frame, an Invalid Project ID error was raised.
  • Data Source: Google Drive: After Importing a CSV or XLS file, clicking on the Refresh icon did not update the content.
  • Data Source: Google Drive: Could not switch a data source to another data source type.
  • Data Source: Google Drive: When trying to re-select the folder for the existing Google Drive Data Frame, it didn’t show files under the folder.
  • Summary View: A chart created by the chart button in the Summary View always shows a 95% confidence interval range even if it is set to 99% or 90% in the Summary View.
  • Summary View: If you created an Analytics from the column header menu in the Correlation mode, the busy icon disappeared before finishing the chart rendering.
  • Data Wrangling: Added ‘Convert Excel Numeric to Date’ menu for character data type column menu.
  • Data Wrangling: Added ‘Unite’ to the column header menu.
  • Data Wrangling: Replace Values with Conditions UI: The cursor was not inside the input field when opening this dialog.
  • Data Wrangling: For the Date and POSIXct column menu, changed it to show Create Calculation Dialog with impute_na command for the missing value operation.
  • Data Wrangling: Filter: Improved UI by removing the extra spaces.
  • Data Wrangling: Rename Dialog: Corrected the error message display position and fixed the issue that the error message was not cleared after name conflicts were resolved.
  • Data Wrangling: Right-hand side steps became empty when the underlying metadata file was broken.
  • Data Wrangling: Now it only shows SQL query on source steps.
  • Data Wrangling: Update text for Repeated Space.
  • Chart: The “Show Detail” and “Exclude” options disappeared after changing the ”# of Columns” options in the chart toolbar.
  • Chart: Exporting the chart data to the CSV failed if the path to the folder contained single quotes.
  • Chart: Reset the skipping unique value check setting when you assign a new column.
  • Chart: Values should start from the bottom to the top by default in the Stacked Bar and Area chart.
  • Chart/Analytics: Column selection should show a Pop-up for the long column names when you hover it.
  • Analytics: It shouldn’t create number buckets if you assign a numeric column that contains only a couple number of unique values to the Color By or Repeat By.
  • Analytics: The “Color Sort Order” chart property was missing in the Chart Property dialog in the Analytics view.
  • Analytics: The Variable Importance Bar chart failed to render and showed an error dialog with a message “key.replace is not a function”.
  • Analytics: Y-Axis Range setting was not effective on the Prediction chart in the Linear Regression analytics.
  • Parameter: When switching LOV type from Character to Logical, it kept showing the Character list where it should show TRUE/FALSE.
  • Publish: Data Share: CSV option is now checked by default.
  • General: Git-related error was raised at closing a project if the password included single quote characters in the Public edition.
  • General: Error “Cannot read property ‘type’ of undefined” was raised if the join/merge target data frame was renamed/removed if its name included ’-’.
  • General: 407 Proxy Authentication Required” should show appropriate error message rather than error report dialog
  • General: Certified R that runs natively on Apple silicon Macs (M1).
  • General: Certified R4.1
  • General: do_tfidf function miscalculated tf-idf.

6.5.5

Released on 5/12/2021.

Bug Fixes

  • Chart: If you chose Top N at the Limit dialog, it dropped the largest value once in a while if you have ties in the values.

6.5.4

Released on 5/11/2021.

Enhancements

  • Data Wrangling: Text Wrangling: Calculate TF IDF: Supported Term Frequency Column parameter.

Bug Fixes

  • Data Wrangling: On Replace Values with New Values dialog, there was no way to edit mapping for values that didn’t exist in current data.
  • Data Wrangling: Separate Dialog: Corrected the position of the ‘Reset’ button.
  • Data Wrangling: The Source Step was overridden by the data wrangling step for some occasions.
  • Data Wrangling: Text Wrangling UI: Changed not to show NA on the preview table.
  • Data Wrangling: Text Wrangling UI: The Number of Preview Rows pulldown list showed unnecessary options when there were fewer than 1,000 preview rows.
  • Chart: Bar Chart was slow to render if you had a lot of unique values in the column for the X-Axis and specified the Sort By option.
  • Chart: Bar: Even if you limited the number of bars to 1,000 by the value using the Limit. it rendered more than 1,000 bars if there were ties in values.
  • Chart: The Highlight dialog didn’t open by clicking the green Highlight info text after choosing ‘Add All Values’ in the Unique Value Check dialog.
  • Chart: The busy icon kept spinning if you created a chart from a character column that had a lot of unique values in the Summary View.
  • Chart: The Unique Values Check dialog should be draggable.
  • Chart: The default ‘Group By’ option of the Window Calculation didn’t work as expected if you created a new Window Calculation.
  • Chart: You couldn’t add the 2nd color condition by clicking ’+’ in the Column Formatting dialog.
  • Analytics: After moving the empty analytics tab by drag and drop, a blank analytics chart content was shown.
  • Export: In some cases, the last steps of data frames imported via the EDF file were missing.
  • General: When the last name was not set on the Account page, Exploratory Desktop showed the user ID instead of the user display name.

6.5.3

Released on 5/6/2021.

Bug Fixes

  • Data Source: BigQuery: When importing data failed, the error message dialog didn’t show up.
  • Data Wrangling: Made the drag and drop data frame list resizer easier to grip.
  • Chart: Values on the plot area were off on the Stacked Bar chart if you assigned a character column with only numbers such as “1” or “2” in the data to X-Axis.
  • Chart/Analytics: After opening the filter dialog for an existing chart or analytics filter, clicking the Close button showed a Delete Incomplete Filter dialog even if the required field is entered.
  • General: On Windows, if Display Scaling is set as more than 100%, it showed an empty screen after selecting a data frame.

6.5.2 (Mac Only)

Released on 5/4/2021.

Bug Fixes

  • Install: On Mac, the install process kept requiring R to be installed even though it was already installed. This happened when the macOS account did not have privilege to write in /tmp directory.

6.5.1

Released on 5/2/2021.

Enhancements

  • Data Source: S3: You can now search the bucket.
  • Data Source: CSV Import: Improved ‘C stack usage is too close to the limit’ error message when the Data Separator mismatch happened.
  • Summary View: Now you can set how many columns to show.
  • Chart: It should show a dialog to select either ‘Limit’ or ‘Other Group’ when assigning a column with too many unique values.
  • Chart: Summarize Table: Now you can choose numeric operators such as ‘Greater Than’ for the conditional color formatting for the logical columns.
  • Chart: Now you can hide axis labels from the Chart Property dialog.
  • Data Wrangling: Now EDF import dialog validates a file extension and shows an error message if a non-EDF file is selected.
  • Data Wrangling: Support parameter syntax for ‘Replace Values By Setting’ conditions.
  • Parameter: Now you can hit the Enter Key to execute inside the Parameter pane.
  • Project: Now the ‘data frame export’ exports all the data frames that are referenced (e.g. via Join) from the main data frame you are trying to export.

Bug Fixes

  • Data Source: After switching a data source, it updated the Data Frame as a merged Data Frame even if there is only one file associated with it.
  • Data Source: Google Drive: ‘Error in curl::curl_fetch_memory(url, handle = handle) : Error in the HTTP2 framing layer’ raised while navigation file list.
  • Data Source: On CSV/Excel Import dialog, Added ‘Change’ button from where you can change file selection.
  • Data Source: On Windows, Installation of Historical Stock Prices Data Source Extension failed while installing dependency package tidyverse.
  • Data Source: S3: Couldn’t select a bucket when the AWS account did not have the list bucket permission.
  • Data Source: S3: On the file list dialog, folder structure was not properly shown and files with the same name displayed multiple times.
  • Data Source: When opening the Update Data Source dialog for the Data Frame created before version 6.5, the dialog title showed ‘Import and merge’ even if the Data Frame was created from a single CSV file.
  • Data Source: When updating the existing data source for a CSV/Excel file, ‘Select’, ‘All’, ‘Conditions’ radio buttons were displayed on the file list dialog even if the Data Frame was created from a single file.
  • Data Source: Google Drive: When a file name contained trailing space, it did not show up in the file list.
  • Data Wrangling: Added text label for ‘Confidential Interval Functions’ in the column header menu.
  • Data Wrangling: Clicking a link in the function help dialog opened the document inside the Exploratory Desktop application.
  • Data Wrangling: Filter: The ‘Create Parameter’ link remained after switching to the Custom tab.
  • Data Wrangling: On Windows, when exporting data to Google Sheets, if a spreadsheet name that has multibyte characters is specified, those characters are garbled in the resulting spreadsheet name.
  • Data Wrangling: summarize_group function was inappropriately suggested in Mutate or Filter expression dialog.
  • Data Wrangling: When creating a branch, it showed ‘Cannot read property ‘then’ of undefined is raised for some occasion.
  • Data Wrangling: There were cases where Analytics View was lost when the Data Frame on it was renamed, if the “Predict with Model” Step was used.
  • Data Wrangling: When clicking the Cancel button on the Update Data Source dialog, the data frame selection was removed from the data frame list.
  • Data Wrangling: Opening an existing data frame failed with an error “Invalid UTF8 payload” once in a while.
  • Chart: Chart Filter: When hovering over the long filter condition, the text inside the popup overflowed.
  • Chart: Summarize Table: The total value was incorrect if you set the ‘Calculation Target’ in the Total Setting dialog to ‘Data Before Aggregation’ and assigned a logical column to the Value with the ’% of TRUE’ aggregation function.
  • Chart: Scatter: If you assigned a character column with numeric character data to the Label, the number formatting was applied to the data.
  • Chart: Values on the plot area didn’t align if you assign many columns to Y-Axis in the Bar chart with ‘Grouped’ Bar Chart Type.
  • Chart/Analytics: Filter: Now it shows a confirmation dialog when trying to close the Filter dialog without entering the required fields.
  • Analytics: Chart content was messed up unexpectedly by drag-and-dropping an Analytics tab.
  • Analytics: Correlation Analytics View raised an error with the message “‘x’ must be a numeric vector” when all the input columns were logical type.
  • Analytics: Correlation: The Significance chart showed an error “Invalid response (expecting SEXP)” if you chose too many columns.
  • General: An error “Cannot read property ‘getId’ of null” showed up right after creating a Script and moving to a Data Frame.
  • General: If the ‘Predict with Model’ step was used, there were cases where an error with the message “Cannot read property ‘get’ of undefined” was raised when trying to duplicate or rename the existing data frame.
  • General: Server: When a Script was imported through an EDF file downloaded from an On-Premise Exploratory Server, its internal ID was displayed in place of the name of the Script.

6.5.0

Released on 4/19/2021. Release announcement: https://blog.exploratory.io/exploratory-v6-5-released-6ccb768993f3

Enhancements

  • Generic: Now you can resize the data frame list width by drag and drop.
  • General: Now a Data Frame can be exported/imported as a .df file, with Charts and Analytics on it.
  • General: Now you can search objects such as Data Frames, Branches, Charts, Analytics, Notes, Dashboards, and others in the project by name, description, and comment.
  • General: Upgraded to R 4.0.5 for the new installs.
  • Data Source: Support importing multiple CSV (or Excel) files from Amazon S3, Google Drive, or local drive.
  • Summary View: Correlation Mode: Now it supports 3 types of visualizations - “Aggregation”, “Distribution”, and “Uncertainty”.
  • Data Wrangling: Filter: Added a support for the “Keep NA” option for the “Not Contain” filter operator.
  • Chart: Now you can show values on the plot area in Heatmap.
  • Chart: The setting for Pivot Table / Summarize Table / Table / Number are now preserved when switching to other chart types.
  • Chart: Added more Patterns (e.g. dotted line) for the Line chart.
  • Chart: Pivot Table: Summarize Table: Now you can choose the total/subtotal calculation timing either before or after the summazing calculation.
  • Chart: Pivot Table: Now you can set the max number of rows to display from the chart property dialog.
  • Chart: Word Cloud: Now you can set a column to Size that is different from the one assinged to Color.
  • Chart: Now the sorting is applied before applying the cumulative Window Calculation.
  • Chart: Now you have more date formatting options on X-Axis.
  • Chart: Now X-Axis is sorted by the ratio of the first category value if you use ”% of” Window Calculation.
  • Chart: Table: Added ‘Date’ formatting.
  • Analytics: Correlation: Added Significance tab to show P values of correlations.
  • Analytics: Correlation: Now you can show the correlation values on the Heatmap chart.
  • Analytics: Correlation: Positive Correlation tab and Negative Correlation tab are combined together into a Data tab.
  • Analytics: Added a new ‘Time Series Clustering’.
  • Analytics: Time Series Clustering: “Normalize” option is added to the existing Analytics Step and new Analytics View.
  • Analytics: Added a new variance-based variable importance (FIRM) algorithm support.

Bug Fixes

  • Data Source: Google BigQuery: After creating the connection, the Setup Dialog didn’t close after clicking the OK button.
  • Data Source: Google BigQuery: It showed Error in curl::curl_fetch_memory(url, handle = handle) : Error in the HTTP2 framing layer for some occasion.
  • Data Source: Google BigQuery: ‘Import via Cloud Storage’ did not use Cloud Storage but loaded data as a stream.
  • Data Source: On the SQL import dialog, when clicking the edge of the Run button, it did not execute the updated SQL query.
  • Data Source: Error was raised from refreshing Custom R Data Source Step right after EDF import.
  • Summary view: If you created a bar chart from the Correlation mode, the default aggregation function became “Sum”. It should be “Mean”.
  • Summary View: It showed an incorrect number of NA values if there were character data starting with “NA”.
  • Summary View: Summary View showed a blank screen when navigating from Analytics view that had an error.
  • Table View: Now the Table View shows numbers with decimal separators.
  • Data Wrangling: The “Numeric Type convert” option was not available when selecting multiple logical columns.
  • Data Wrangling: After copying a data frame, the hover pop-up didn’t show chart thumbnails.
  • Data Wrangling: After deleting a data frame, if you re-used the same name for copying another data frame, the previously selected view was displayed instead of Summary View.
  • Data Wrangling: On Create Bin UI, changing the method resulted in an error.
  • Data Wrangling: On the data frame list, the currently Selected Data Frame was unselected when creating a new note.
  • Data Wrangling: When creating N-Grams, it did not work if the same column was assigned for both Document ID and Sentence ID.
  • Data Wrangling: Error “Cannot read property ‘type’ of undefined” was raised if a Data Frame referenced from a step like Join or Merge was renamed.
  • Data Wrangling: Filter: For the Year / Month option, changed to show the locale neutral example as the placeholder text in the input field.
  • Data Wrangling: Filter: When today’s date is the end of the month such as Mar 31st, the “Previous Month” filter operator did not work.
  • Data Wrangling: The Merge step should not show its own Data Frame or Branch as a possible target.
  • Data Wrangling: Mutate Multiple Dialog: Right-hand side options were not shown for data types other than character and logical.
  • Data Wrangling: On Summarize Group dialog, when typing the Japanese column name in the custom expression editor, the expression was removed.
  • Data Wrangling: Recreating a branch leads to a strange state where the main branch source is selected while viewing the branch.
  • Data Wrangling: The “Remove Text with Range Positions” option didn’t work with a negative index.
  • Data Wrangling: Improved text for POSIXct and Date column menu label for Replace Value by Setting Conditions.
  • Data Wrangling: Added summarize_row function for summarizing values in different columns for each row.
  • Data Wrangling: The Text Wrangling dialog accidentally closed when selecting the “Extract Range of Text” option.
  • Data Wrangling: When creating a logical parameter from the Filter Dialog, the default value is not properly set, and an R error was raised.
  • Data Wrangling: When deleting a not selected data frame that had charts, it ended up showing duplicated charts when creating a data frame with the same name.
  • Data Wrangling: When exporting a data frame, it didn’t show a spin icon.
  • Data Wrangling: When importing a data frame, the newly selected data frame was not selected for some occasions.
  • Data Wrangling: When splitting a filter step that contained a disabled token, an error with the message “Assertion failed” was displayed.
  • Chart: The “Tick Label Auto Scaling” option was missing in Line and Area charts.
  • Chart: A grayscale color palette should be added to the color palette list for publications.
  • Chart: Adding Limit on Word Cloud Word, Enabling Limit by default on Bar X and Word Cloud Word.
  • Chart: Bubble: The “As Numeric” function didn’t work in the same way as other numeric functions such as “As Integer”.
  • Chart: Bubble: No P-Value showed up in the Trend Line if number columns were assigned to both X and Y axes with the “As Integer” function.
  • Chart: Bubble: Trend Line was off if number columns were assigned to both X and Y axes with the “As Discrete” function.
  • Chart: Highlighted items didn’t come at the top in the legend area if you chose the “Horizontal” orientation in the Bar chart.
  • Chart: You couldn’t access the Color Setting if you had multiple columns assigned to Y-Axis and no column for Color.
  • Chart: Map: When you created a Map and assigned a column to the Color, the green information text for the “Equal Width” bucketing option didn’t show up.
  • Chart: Now the text sort for non-English text in the legend is consistent between Windows and Mac.
  • Chart: If you used Repeat By and you had only 1 small multiple, it should use the full width of the chart view area regardless of the layout setting.
  • Chart: Summarize Table didn’t show the green information text for the “Other Group” setting if a date column was assigned to “Group”.
  • Chart: If you exported a Pivot Table to Excel, the numeric data were treated as text if the numeric column contained NA values.
  • Analytics: When in Analytics View, the spin icon was removed in the middle of switching the data frame.
  • Analytics: Correlation by Category Step: With Japanese UI language, sum and medial labels are not translated in Japanese.
  • Analytics: Correlation Step: The View type selector disappeared when selecting columns in the Column Selection dialog.
  • Analytics: Improved the UI by reducing unnecessary space between Analytics tabs.
  • Analytics: K-means: Stacked Bar failed to render and showed an error if there were many unique values in the column assigned to the Label Column.
  • Analytics: Market Basket Analysis Step: Auto-selection of support threshold is made available on Analytics Step too.
  • Analytics: After moving the Analytics tab by drag and drop, selecting the Correlation Analytics View tab sometimes hangs.
  • Analytics: Time Series Forecast (Prophet): Made built-in country holiday data available for Analytics Step too.
  • Analytics: Random Forest, XGBoost: Column name with single quote character raised an error with message “error code 3”.
  • Analytics: Total number of groups showing up in the “Other Group” green information text for a Date column was incorrect.
  • Analytics: Configuration on the type of variable importance was lost when the type of prediction model was switched.
  • Analytics: XGBoost: Horizontal scrollbar was not fully displayed when there were many analytics tabs on the Analytics View.
  • Analytics: K-means / PCA: If columns with types such as list, difftime, etc. were there in the input Data Frame, an error with a message such as “unimplemented type ‘list’” was raised.
  • Analytics: Logistic Regression / GLM Binomial: Output column from prediction with new data “predicted_response” was renamed to “predicted_probability”, just like other binary classification models.
  • Note: Charts didn’t show up correctly if you restored the content from the history and clicked the preview.
  • Note: When opening a note, it did not show a spin icon.
  • Note: When opening a note, related data frames were not highlighted.
  • Note: When you opened a note in the full-screen mode, you couldn’t close the note window.
  • Note: If you exported a note containing a Pivot Table with color as a Word Document, the Pivot Table in the exported document had unexpected data.
  • Slide: Clicking the “Fit in Screen” checkbox on a chart took you to the next slide.
  • Dashboard: Hitting the “Run” button on Dashboard reran steps after reference to an empty-list Parameter even if the Parameter is not changed.
  • Dashboard: When editing a dashboard, the “Set Height” label was always displayed even if the option was not selected.
  • Dashboard: When moving from “Fit to Screen” mode to “Fit Within the Specified Height”, row height got shrunk.
  • Dashboard: When resizing a Dashboard Window, it triggered unnecessary re-rendering and took some time to finish.
  • Dashboard: When there is an empty row, now the “add new row” menu becomes disabled since adding repeating empty rows is not supported.
  • Parameter: After running a parameter without a default value, it showed the previous default value when opening the Parameter UI.
  • Parameter: Changed to always show the “Display As” input field.
  • Parameter: When running a parameter, changed the default for the “Auto Run” as unchecked.
  • Parameter: When creating a logical parameter, clicking on the Default checkbox didn’t select all the options.
  • Parameter: Error was raised at importing EDF file with a Date / POSIXct Parameter with a relative date default value.
  • Parameter: It didn’t create a parameter when clicking “Create Parameter” in the Filter dialog.
  • Parameter: Parameter appeared in filter command as @{[object Object]} if the parameter is picked implicitly as a result of operator change.
  • Parameter: The same column name showed up twice for the list of values’ column selector.
  • Parameter: When changing parameter type from Date to Text, default date value type remained and it caused the unexpected default value was set for the parameter at runtime.
  • Parameter: When creating a new parameter, an existing parameter display name was pre-populated for the display name of the new parameter.
  • Parameter: When using the multi-select list of values parameter for filter “Is In” operator, it showed an empty screen when trying to open Parameter UI.
  • Parameter: When using the “today” as the default value of the Date parameter, if today was outside of min and max values, the parameter was not properly rendered.
  • Project: After deleting a custom R package, clicking the “Auto fix” button or the “Open (No User R Package)” button on the confirmation dialog did not open the project that referred to the R package.
  • Project: Clicking a script didn’t highlight itself in the catalog tree.
  • Project: On the Project List, when a search keyword exists, if you delete a project then the unmatched project is also displayed as a search result.
  • Project: When clicking the Create Project button, it flickered.
  • Project: When closing a project, there was a lag even though the project did not have any data frames.
  • Project: When exiting a project, there was a case where you keep seeing an Error dialog and cannot exit the project.
  • Publish: Insights published to an on-premise Exploratory Server before hostname / IP address change was not recognized by Exploratory Desktop after the hostname / IP address change.
  • Publish: When publishing an insight with Google Sheet Data source, etc. which was just imported via EDF file, without creating a Connection for it in the Project, it failed.
  • Export: Exporting EDF file into another drive, such as D: drive or Google Drive failed and showed an error “cross-device link not permitted, rename”.
  • General: Creating Project could fail because of an error from the user’s custom pre-commit Git hook (e.g. git-secrets).
  • General: .git directory was included in exported Project zip files, but we stopped including it for size reduction and speed.

6.4.6

Released on 3/1/2021.

Enhancements

  • Chart: Long/Lat Map” Now you can split the lines even in the same color by setting a column to the ‘Label’ and enabling the ‘Split lines by Label column’ option in the property when the marker is ‘Line’.

Bug Fixes

  • Data Wrangling: Added the ‘Replace Values By Setting Conditions’ menu to the logical data type column header menu.
  • Data Wrangling: Fill NA with Predict (impute_na) raised an error when the first row’s value of the first predictor column was 0 or NA.
  • Data Wrangling: Closing the Join dialog without selecting Key Columns created an invalid step.
  • Chart: No rows showed up in the ‘Show Detail’ dialog.
  • Chart: Unnecessary ’%’ signs showed up on the chart plot area for NA values when you set the ‘Show Values if Greater than This Value’ option in the chart property dialog.
  • Chart: Values on the chart plot area showed the percent numbers with ’%’ signs for Y-Axis columns when it was not necessary when you used the ‘Repeat by Y-Axis Column’ feature.
  • Analytics: Table columns in the Summary tab were not translated (Japanese).
  • Dashboard: When adding a chart to a row, charts’ widths were not proportionally distributed.
  • Dashboard: When adding a chart to an existing dashboard created with the previous version, the added chart’s width was not adjusted properly.

6.4.5

Released on 2/25/2021.

Enhancements

  • Chart: Now you can select the Standard Deviation and IQR as one of the sorting metrics in BoxPlot, Violin Plot, and Scatter (With Aggregation).
  • Chart: Now you can set the threshold to show the values on the plot by using the ‘Show Values if Greater than This Value’ property in the Chart property dialog.
  • Dashboard: Now you can adjust the width of all charts to be equally distributed in a row by clicking the ‘Distribute width evenly’ button.

Bug Fixes

  • Data Source Extension: After publishing the Weather Data, clicking the ‘Run Immediate’ button didn’t refresh the data.
  • Data Wrangling: After a data wrangling step error was resolved, the error indicator icon on the data frame was not cleared right away.
  • Data Wrangling: The spin icon disappeared before a new step was completely added to the right-hand side step list.
  • Data Wrangling: Text Wrangling UI: Improved the error message for when it failed to load a large preview data.
  • Chart: When duplicating a chart, there was a time lag until the chart menu became active when there were many charts.
  • Analytics: If you ran the Random Forest with 3.600 variable columns, it failed to run and showed an error ‘invalid response (expecting SEXP)’.
  • Analytics: model_info function threw an error ‘object <column name> not found’ when the column name for the model was other than ‘model’.
  • Note: If you had an HTML script tag for Speaker Deck slides in a published Note, the loading bar kept showing for a long time even if the content was already loaded.
  • Dashboard: After changing the Text Box width by drag and drop, the updated text was reverted to the original one.
  • Dashboard: Set Height Mode: Adding or deleting a row changed other rows’ height unexpectedly.
  • Publish: After republishing a publicly published insight to make it private, a new URL was assigned, where it should keep the original URL.
  • Parameter: Starting to use Parameter on the Server failed if the Insight had a Parameter that was based on another Data Frame.
  • Project: On Windows: When exporting a project as a zip file, non-ASCII characters in the project names were removed from the default name.
  • Installation: On the Proxy setup dialog, the port number input field implies 8080 as the default port, but port 80 was actually used as the default port.
  • General: On Japanese Windows, when publishing data that include Dame-moji, the table view on the published data didn’t show data.
  • General: There was no way to switch server or account when the associated Collaboration Server license had expired or the user was a viewer.

6.4.4

Released on 2/15/2021.

Bug Fixes

  • Data Wrangling: Filter: For the ‘Last N Months’ operator for POSIXct column, changed to use as_date function instead of as.Date function to make sure the correct timezone is used.
  • Chart: Bar chart failed to render and showed an error “Assertion failed” if you left the “Value” field empty and hit the “Apply” button in the Logical Condition dialog.
  • Chart: After removing the Chart Pin, selecting a different data wrangling step didn’t refresh the chart.
  • Analytics: Time Series Clustering: Since the random seed was not set, the result changed for each run. Now the random seed is set by default, and you can change it if you like in the dialog.
  • Dashboard: When opening a dashboard created with the previous version on Set Height mode, it didn’t honor the previously set row height.
  • Dashboard: Scrollbars showed up in Number charts once in a while in the Preview mode.

6.4.3

Released on 2/14/2021.

Enhancements

  • Chart: Now the “CSV” Download option is available when you publish a Chart or Analytics. If you check this option, you can download the data used for Chart/Analytics in the CSV format from the published Chart/Analytics insight page on the server.
  • Chart: If the ”# of Columns” was set to 1 or 2 with Repeat By, the height of the chart is now set to the window height, which will make it easier to see the charts when there are multiples.
  • Chart: Table: It now supports ‘Apply’ button so that you can setup the formatting and see the result in preview without closing the setup dialog itself.
  • Analytics: Added a checkbox to enable/disable data sampling for the prediction models under Analytics Views.
  • Analytics: ARIMA: The hover popup on the line chart in the Stationarity tab now shows how many differentiations and/or seasonal differentiations were applied on the original data to get the displayed differentiated data, which the stationarity test is performed on.
  • Analytics: Time Series Cluster: The default algorithms were changed to ‘DTW with L2 Norm’ and ‘DTW barycenter averaging’ to make it more robust for various type of data. They used to be ‘Soft-DTW’ and ‘Soft-DTW center’ respectively, which could throw an error like “gradient of objective in x0 returns NA” when a given data includes an outlier time series.
  • Analytics: Random Forest / Decision Tree: Prediction with a binary classification model under Analytics View now returns the original target column as Logical data type rather than Factor data type under the Data tab.
  • Data Wrangling: Summarize Dialog: Now the column names of the result do not have an aggregate function as suffix unless the same column used multiple times.
  • Data Source: Improved Teradata Data Source for the performance and multibyte characters handling.
  • Dashboard: When you change the page height with ‘Set Height’ mode, now it adjusts the height only of the bottom row and keeps heights of other rows as original.
  • Dashboard: Now it dynamically shows the current row height and column width while adjusting them by drag and drop.

Bug Fixes

  • Data Wrangling: Moved ‘Keep Only’ menu to under ‘Filter’ of the column header menu when multiple columns are selected.
  • Data Wrangling: Number of rows was shown as 0 when directly opening a chart view of a branch data frame.
  • Data Wrangling: ‘Predict with Model (Analytics)’ Dialog: The order of model pull-down list items did not match with the order of the tabs under Analytics View.
  • Data Wrangling: When you duplicate a data frame and give a conflict name that is used by another data frame, an incorrect ‘[Object object]’ error message was shown.
  • Chart: Chart Table: When trying to remove a column that didn’t exist anymore, the Column Selection UI hung.
  • Chart: Density Plot chart failed to render with an error when an assigned column’s values are mostly NA.
  • Chart: ‘Show Details’ didn’t open if the chart had a chart filter with the ‘Last N Months’ condition for a POSIXct column.
  • Chart: The Custom Calculation dialog didn’t validate the expression even if the expression didn’t aggregate the data and returned more than one row.
  • Note: If you opened a Note with a Pivot Table created in an older version of the desktop without opening it in the Chart view, it showed the ’|||’ sign in the Value cells.
  • Parameter: At the publishing of insight, now we do a validation check on whether the Data Frames referenced from Parameters for list-of-values or range actually still exists. This will prevent the scheduler from trying to load non-existent parquet/rds files and ending up throwing an error.
  • Installation: Setting up the proxy configuration during installation caused the installation process to hang.
  • General: When the ‘request offline license key’ button was clicked, there was no way to see the required information if the PC did not have a mail client setup.
  • General: Clicking on the sort icon of the ‘Updated’ column on the Project List page did not sort the project names correctly when the system locale is set to a Russian locale on Windows PC.

6.4.2

Released on 2/8/2021.

Bug Fixes

  • Data Source: Data Source Extension dialog now has the ‘Details’ button from where you can open each Data Source Extension’s help page in a browser.
  • Data Wrangling: Create Bin: The ‘Column to Categorize’ field was not shown.
  • Chart: Exported CSV data was separated by ”|||” in Summarized Table and Pivot Table.
  • Chart: If you used a custom calculation, it didn’t multiply values by 100 even if you chose ‘percentage’ for the number formatting.
  • Chart: Now you can choose “None” for the bucketing type at Color to disable the color bucketing in “Map - Standard”, “Map - Extension”, “Map - Long/Lat” and “Bubble” charts.
  • Analytics: Data tab failed to render and showed an error “Cannot read property ‘0’ of undefined”.
  • Dashboard: Dashboard didn’t show in the same layout (height/width) configuration as it used to in the previous desktop version even without a change made for resizing the row/column.
  • Dashboard: Resizing a dashboard row height by drag and drop was not smooth and difficult to set desired height.
  • Dashboard: Dashboard row height/ratio was different between the design mode and the preview mode.
  • General: Mac: Removed HTTPS option from Proxy Setup UI since Mac does not support HTTPS for proxy.
  • General: With the existing proxy setup, remote file data source and web scraping did not work after upgrading to 6.4.1.
  • General: Windows: When making the window size to full, it showed an empty screen for some occasions.

6.4.1

Released on 2/4/2021.

Enhancements

  • Data Source: SAS/SPSS/STATA: Now you can choose an encoding for the file on the import dialog.
  • Data Wrangling: Create Bin: Now you can manually set labels for the Equal Length and Equal Frequency cases inside the dialog.
  • Chart: Table: Now you can change the max number of columns to show.
  • Dashboard: Now you can resize Dashboard width and height by drag and drop.
  • General: Account login and publishing insights from behind HTTPS proxy is supported on Windows.

Bug Fixes

  • Data Source: Connection Test failed with “type 26 is not implemented” error for Teradata connection.
  • Data Wrangling: Not all rows were copied to the clipboard when exporting data to the clipboard on Windows.
  • Data Wrangling: Filter: When a character parameter was used along with the ‘Ignore Case’ filter option, an empty string was not detected with the filter.
  • Chart: Table: Column Selection dialog disappeared when the chart was pinned to a step that had no rows and selected a column from the list.
  • Chart: Histogram failed to render and showed an error “Problem with summarize()” if Limit was set on Color.
  • Chart: It shouldn’t create categories on number values on X-Axis if the number of unique values is not too many when you switch the chart type from Scatter to Bar.
  • Chart: Line chart failed to render and showed an error “q is not a function”.
  • Chart: Pivot Table didn’t show Value cells property if the column for the Value contained ’,’ in the value.
  • Chart: Summarize Table failed to render and showed an error “Cannot read property ‘url’ of null” when a column at Row was removed.
  • Chart: Summarize Table: “Hide” menu was missing for columns at Row in Summarize Table.
  • Chart/Analytics: In the multiple columns selection dialog, the preview table didn’t show preview results once in a while because the previous R process was still running.
  • Analytics: “GLM - Gamma” Analytics failed and showed an error “no valid set of coefficients has been found”.
  • Analytics: ARIMA: Auto correlation with lag 0 was shown in the ACF bar chart.
  • Analytics: ARIMA: Bars for negative ACF values were not shown in the ACF bar chart.
  • Analytics: Cox Regression: At the Data tab, you couldn’t select the “All” option from the “Rows” drop-down in the toolbar.
  • Analytics: Sample size should be configurable at the Analytics control pane.
  • Dashboard: After resizing a dashboard window, clicking an URL in a table inside the dashboard opened another Exploratory Desktop window where it should open a browser.
  • Dashboard/Note/Slides: Wordcloud didn’t refresh even if you updated parameters on the browser in the published Dashboard, Note and Slides.
  • Dashboard: Unnecessary Dashboard refresh was performed if you clicked the information (“i”) icon in the toolbar.
  • Parameter: Error “type 26 is not implemented” was raised when the parameter was used in a Data Source Step.
  • Parameter: When opening a parameter pane, it didn’t show a spin icon while loading the list of values.
  • Project: Could not enter an URL for Public Project Import UI.
  • General: Even after setting correct proxy info, re-login still failed until restarting Exploratory.

6.4.0

Released on 1/26/2021.

Enhancements

  • Data Source: Now you can adjust “Max Tree Depth” and “Max List Size” when you load JSON data in the JSON data import dialog.
  • Data Source: Supported Snowflake as a new data source.
  • Summary View: Now you can create Anova, Wilcoxon and T Test from the Correlation view.
  • Data Wrangling: Tokenize Text: Now you can sort results by ‘Document ID’.
  • Data Wrangling: Separate: Added ‘Combine with Original Column Name’ parameter.
  • Chart: Now you can add vertical reference lines in Bar chart.
  • Chart: Summarize Table: Table: Now you can customize column header formatting.
  • Chart: Now you can disable using unit abbreviations such as “k” or “M” on the chart axis by the “Shorten Numbers” option in the Chart Property dialog.
  • Chart/Analytics: Changed the default name for copied charts/analytics to have “-x” suffix where x is a number to make the name unique.
  • Analytics: Time Series Forecast Analytics View with Prophet now supports quarterly and monthly seasonality.
  • Analytics: Now you can adjust how many rows to show for the Table data under the “Data” tab.
  • Analytics: Time Series Clustering is added as a new Analytics Step.

Bug Fixes

  • Data Source: Added “Optional” label for an optional parameter to make it obvious.
  • Data Source: Removed an old MS SQL Server (DSN) option from the Data Source selection dialog.
  • Data Source: When trying to add a Teradata connection, UI became empty and hung.
  • Summary View: Loading Summary View was slow comparing to the previous version for Windows.
  • Summary View: P Values under 0.001 should be shown as ”< 0.0001” instead of “0.0000” in the Correlation view.
  • Summary View: When clicking the Ratio button on Summary Highlight mode, the Ratio button didn’t get highlighted.
  • Data Wrangling: _tam_isDataFrame function, which is an internal function of Exploratory, was included in exported R script for web scraping, CSV, etc., which made the exported script hard to run outside of Exploratory.
  • Data Wrangling: Filter: On a Filter step, changing the logical operator showed an incorrect “Condition is empty, Do you want to delete” message.
  • Data Wrangling: For local file data sources, now it shows the file full path when hovering over the source step.
  • Data Wrangling: Remote File Data Source: Hitting the Tab key inside the URL field was running the preview again.
  • Data Wrangling: Text Wrangling UI: Preview table showed unnecessary sort icons on the column header.
  • Data Wrangling: Text Wrangling: Matched text was not highlighted for Replacing Range of Text option.
  • Data Wrangling: When importing data right after started the App, the Summary, Table, Chart, and Analytics tab labels were shown in English even if the UI Language was set as Japanese.
  • Data Wrangling: When updating an existing Select Columns step, it didn’t allow you to select additional columns.
  • Chart: After deleting a chart table that included invalid columns, it showed an empty screen.
  • Chart: After duplicating a chart with a chart filter, when you changed the chart filter setting it also changed the original chart filter setting.
  • Chart: Show Detail showed no rows if numeric columns were assigned to Y and Color in Bar chart.
  • Chart: Summarize table failed to render if you added multiple columns to Row and selected “(None)” for the 1st one.
  • Analytics: ARIMA: In the Summary tab, Repeat-By column wrongly showed up twice.
  • Analytics: Cox Regression: P-values and coefficients are now displayed in the hover popups.
  • Analytics: R squared and RMSE are now added to the Summary table of “GLM - Gaussian” Analytics View.
  • Analytics: When creating an analytics from the Summary View, the spin icon disappeared in the middle of the transition from Summary View to Analytics View.
  • Analytics: XGBoost: In some cases, multiclass classification threw the error “SoftmaxMultiClassObj: label must be in [0, num_class).”.
  • Note: Publish Dialog got closed when clicking outside of the dialog where it should have stayed open.
  • Note/Slide/Dashboard: When importing a Note/Slide/Dashboard EDF file, it should open it in a separate window.
  • Parameter: In some cases, when publishing an Insight, a cached data file for Parameter was missing in the uploaded EDF file, which caused an error when using the Parameter on the Server.
  • Project: Improved the error message when it failed to open a project due to Rserve start failure.
  • Project: On Windows, exporting a project failed if the exploratory repository was on a network drive.
  • Project: When deleting a project from the project list, it didn’t show a spin icon.
  • General: While exporting a Dashboard as an EDF file, it didn’t show a spin icon.
  • General: Windows: Supported Windows-1251 as System Encoding.

6.3.4

Released on 12/30/2020.

Enhancements

  • Data Source: Added “EDF” option to File Data Source menu.
  • Data Source: Extension: Added the “Open” button on the Data Source Extensions list. You can click it to open the corresponding help page in the web browser.
  • Data Source: Github: Improved the error message with a link to the instruction page when authentication with password failed.
  • Data Wrangling: You can now select “Week of Year - Sunday Start” or “Week of Year - Monday Start” options when you want to get the week number under “Extract” menu of the column header menu.
  • Data Wrangling: New columns added by the “Predict with Model” step are now getting highlighted under the Summary View and the Table View.
  • Data Wrangling: Text Wrangling UI: Now you can sort the preview table by clicking the column header.
  • Data Wrangling: Tokenize Text: Generating N-Gram for Japanese words is now supported.
  • Data Wrangling: A “cumsum_decayed” function is added. It can be used to calculate Adstock for Marketing Mixed Modeling, etc.
  • Data Wrangling: Count Text Pair & Tokenize Text dialog: Improved Japanese translation for the dialog title text and the label text.
  • Data Wrangling: Filter: Now it preserves the selected value in the input field when switching between columns as long as the operator is one of the ‘contains’, ‘not contain’, ‘starts with’, and ‘end with’. 
  • Data Wrangling: Filter: Now it preserves the selected value when switching the filter operator between “Equal To” and “Is In”.
  • Data Wrangling: The ‘Group By’ columns no longer have a trailing suffix with function name when there is no conflict.
  • Data Wrangling: Improved Japanese translation for Text Pair dialog title and step label.
  • Data Wrangling: Now the “Country Code” is the default destination for the ‘Convert Country’ when opening the Text Wrangling dialog from the column header menu.
  • Data Wrangling: On Rename dialog, added the “x” icon for clearing search text.
  • Data Wrangling: On Summarize dialog, changed the data type of Number of Rows, unique, etc as Numeric instead of Integer.
  • Data Wrangling: Replace Values By Conditions: Changed ‘Create New Column’ option to be the default.
  • Data Wrangling: Replace Values By Conditions: Now the Condition Setting dialog is draggable.
  • Data Wrangling: Text Wrangling UI: Changed ‘Overwrite Existing Column’ option to be the default.
  • Chart: You can now rename the column names that are assigned to Y-Axis.
  • Chart: You can now select “Week of Year - Sunday Start” or “Week of Year - Monday Start” options when you want to get the week number for the Date/POSIXct columns.

Bug Fixes

  • Data Source: Google BigQuery: When OAuth token was invalid, Google BigQuery Configuration dialog showed an empty project list.
  • Data Source: SQL Server: Import dialog didn’t show an error message and just closed when an error happened during the import.
  • Summary View: After deleting a data frame while the current view was the Summary View, importing a CSV file ended up with an empty screen.
  • Summary View: A new Analytics created from the Summary View had a weird name if UI Language was set to English.
  • Summary View: Emoji data didn’t show up correctly.
  • Summary View: It showed an empty screen when navigating from a branch data frame to the parent data frame.
  • Data Wrangling: Added description to the column menu for numeric functions.
  • Data Wrangling: Cached steps did not work correctly if the previous step was updated with some columns being dropped.
  • Data Wrangling: The column names were not highlighted properly in the Calculation Editor when they contained Japanese character and ”_”.
  • Data Wrangling: Replace Values With New Values: The Input field for “Default Value” didn’t show up even if you checked the “Set Default Value” checkbox.
  • Data Wrangling: Table Filter dialog didn’t close automatically when moving to other views.
  • Data Wrangling: When selecting the Row Number from a Window Function Column Menu, the row_number function shouldn’t have the column name.
  • Data Wrangling: Windows: Emoji data used in the data wrangling steps were garbled.
  • Data Wrangling: When creating a calculation using with_tz function, syntax suggestion showed multiple timezones for the same “GMT” timezone.
  • Chart: Icons for Column Format dialog didn’t show up if column names were long in Column Selection dialog in Table. 
  • Chart: Maps installed locally shouldn’t show up in the “Updates” section in Map Extension dialog.
  • Chart: Table didn’t show 0.1 as “10%” even when the “Percentage” number format was applied.
  • Chart: Visual Formatting condition dropdown didn’t show fully if you defined multiple conditions in the Column Formatting dialog.
  • Chart: “(Number of Rows)” was missing at Label for the ‘Scatter (With Aggregation)” chart.
  • Analytics: After duplicating an analytics, the “Prediction” tab did not show the content until the green link was clicked again.
  • Note: Table of Content part overlapped the content body if you opened a note in Safari browser and used the browser’s zoom out feature.
  • Publish: Publishing a data frame that contains empty list columns with enabling “CSV” download option failed and showed “Flat files can’t store the list column” error.
  • Publish: RDS/Parquet files were included in EDF even when no EDF download, Scheduling, or Parameter optiones were turned off.
  • Publish: Cached prediction models were not properly updated by scheduled jobs.
  • Publish: In some cases, column data types of data from some data sources were different between when it was on Exploratory Desktop and when it was on the Server with Parameters.
  • Parameter: Now it shows a warning message and icon for a parameter that refers a data frame that no longer exists.
  • Project: Publishing a project at the closing of the project with Exploratory Public failed.
  • General: On Mac, in some cases, at the installation, the error “Security returned a non-successful error code: 51” was raised.
  • General: When exporting a project as a zip file, if it was done by overwriting an existing zip file, the content of the existing zip file remained in the new zip file.

6.3.3

Released on 12/11/2020.

Bug Fixes

  • Chart: Dropdown list opened from bottom to top so that you couldn’t see all the options in the Set Color Conditionally section of the Format Column dialog in Table.

6.3.2

Released on 12/10/2020.

Enhancements

  • Data Source: ODBC: Now it has one unified “ODBC” data source that supports both ‘unixodbc’ and ‘iodbc’ types.
  • Chart: Table: You can now set the column width and also enable text wrapping.
  • Chart: Table: The Font Style and Visual Formatting options are now supported even for the non-numeric columns.
  • Analytics: Time Series Forecasting (Prophet): “Autoscale Y Axis” is supported for the Forecasted and the Trend charts.
  • Analytics: Prediction by a model created with Analytics View is now supported on Interactive Session at Exploratory Cloud and Exploratory Collaboration Server.
  • Analytics: Adding ‘model_info’ function to extract model information from a list column of a data frame that stores model objects.
  • Installation: Supporting a proxy server connection test capability in the System Configuration dialog.

Bug Fixes

  • Data Source: With ODBC data source, a SQL query that included non-ascii column names in a ‘where’ clause didn’t work for Oracle Database.
  • Data Wrangling: Error message from an invalid step kept shown even after opening a different project.
  • Data Wrangling: Reorganized the column menu for Text Data Wrangling.
  • Data Wrangling: On the Table View, adding a step failed with an error when a newly added step removed a column that was used for the table filter.
  • Data Wrangling: On Recode dialog, switching a column to overwrite did not work and it kept showing the previously selected column.
  • Data Wrangling: ‘Create Bin’ dialog froze right after opening the dialog.
  • Chart: Line chart failed to render and showed an error dialog when you entered non-numeric values for the Constant Values in Reference Line setting.
  • Chart: Pivot Table failed to render and showed an error dialog when you entered the same value twice for Cutting Points in Category Setting dialog.
  • Analytics: It is now easier to show a popup by hovering a reference line in Error Bar charts in T Test and Wilcoxon Test.
  • Analytics: Prediction by a model created with Analytics View on a scheduled job at Exploratory Cloud server failed, if Date information extraction function was applied on predictor variables, and the server’s locale was set differently from that of the Exploratory Desktop.
  • Installation: On macOS Big Sur, installation of R, as part of Exploratory’s installation, did not properly create R’s executable at /usr/local/bin/R, resulting in Exploratory repeatedly requiring R to be installed.

6.3.1

Released on 12/3/2020.

Enhancements

  • Summary View: Supported creating analytics (e.g. Random Forest) by selecting multiple columns.
  • Summary View: Supported more chart/analytics types for creating from Summary View.
  • Data Wrangling: Supported ‘Text inside of’, ‘Text by Range’, ‘First Word’, ‘Last Word’, ‘Email Address’, ‘URL’, and ‘Emoji’ options for Text Wrangling Dialog.
  • Data Wrangling: Added “Unite” parameter to the Count Text Dialog.
  • Data Wrangling: Supported ‘Group by’ parameter for Count Token Pair.
  • Data Wrangling: Supported an option to summarize the count by Token, not by Document ID for Tokenize Text (No Spaces Between Words).
  • Data Wrangling: You can now move the rename dialog inside Summarize Step UI.
  • Data Wrangling: Supported pagination for Text Wrangling and ‘Replace Values with New Values’ UIs when there are too many rows in the preview table.
  • Data Wrangling: It now has an option to show ‘space/tab/new line’ in the preview table inside the Text Wrangling UI.
  • Data Wrangling: On the Text Wrangling Dialog’s Preview Table, now it shows the number of unique values in Count Column.
  • Chart: Added a new ‘Summarize Table’ to summarize data in a table format.
  • Chart: Now you can repeat charts for each Y-Axis column when you assign multiple Y-Axis columns.
  • Chart: Added “Logistic” and “Poisson” Trend Line types.
  • Chart: Added a “Quick Window Calculation” menu.
  • Chart: Supported clicking to highlight rows in Table, Pivot Table and Summarize Table.
  • Chart/Analytics: Column Selection dialog now shows how many columns are selected.
  • Chart/Analytics: When duplicating a Chart/Analytics, it now shows a dialog to set the name.
  • Analytics: You can now add a step to predict by using a model that is created in the Analytics View
  • Analytics: Cox Regression and Survival Forest now has chart for time-dependent ROC with AUC.
  • Analytics: Cox Regression and Survival Forest now support ‘Test Mode’ and show the model evaluation metrics under the Summary tab.
  • Analytics: K-Means: Error bar chart for cluster means now can be displayed either in normalized values (default) or in raw values.
  • Analytics: Logistic Regression: On the Prediction chart, odds ratio of each predictor variable is displayed on the mouse-hover popup.
  • Analytics: Maximum VIF (Multicollinearity) is now displayed on Summary table of Linear/Logistic/Cox Regression, and GLMs.
  • Analytics: When switching type of Analytics, more properties are preserved, instead of getting reset to the default value.
  • Analytics: Supported changing a base level for Character/Factor columns when selecting predictor columns.
  • Analytics: T-Test, ANOVA, Chi-Square test: Added Probability Distribution tab to show the probability distribution of test statistic under null hypothesis.
  • Analytics: Time Series Forecasting (Prophet): 0 as forecast period is allowed. This is useful when you’d like to create a model with external variables, which do not have future values.
  • Analytics: By-class summary table for multiclass classification is added back.
  • Analytics: Linear Regression: Residual/Prediction scatter plot is added back.
  • Report: Now you can see the setting menu of the charts with ‘Repeat By’ even inside Note, Slide and Dashboard.

Bug Fixes

  • Data Source: CSV Import failed with invalid multibyte characters with ‘element 3’ error.
  • Data Source: Google Analytics: Failed to get a list of account when there were too many properties.
  • Data Source: Mongodb connection string stored in connection turned into random string when userconf.json file was broken.
  • Data Source: Web Scraping: Run button didn’t work when the previous preview didn’t return any data.
  • Data Source: On Windows, Web Scraping failed with invalid multibyte characters.
  • Data Source: Re-opening the Data Source Dialog was slow when not all the columns were selected for the first import.
  • Data Wrangling: ‘Replace Values with new Values’ Dialog became unresponsive when the selected column has too many unique values.
  • Data Wrangling: Added ‘Replace Values by Conditions’ menu to the column header menu of the Date and POSIXct data type columns.
  • Data Wrangling: After selecting multiple steps, selecting another data frame causes the issue that right hand-side steps showing incorrect steps.
  • Data Wrangling: Changed to show the ‘Replace Values by Conditions’ dialog for “Replace … with NA” column menu.
  • Data Wrangling: Cleaned and consolidated the column header menu for Text Wrangling related operations.
  • Data Wrangling: Could not select multiple columns for the “Add Row Manually” step.
  • Data Wrangling: Exporting a step data as a data frame at the source step caused an error.
  • Data Wrangling: Exporting table data was not honoring the Table Filter setting.
  • Data Wrangling: Added ‘Remove Duplicate’ option to the column header menu under ‘Filter’.
  • Data Wrangling: Moving Pin did not work and right hand side area became blank for some occasions.
  • Data Wrangling: On Duplicate Data Frame UI, “Include Chart” and “Include Analytics” checkboxes are now checked by default.
  • Data Wrangling: On Text Data Wrangling UI, the preview table highlight was not happening for some cases.
  • Data Wrangling: On the Table View, after adding a Group By step, the table shows incorrect coloring for the groups.
  • Data Wrangling: On Windows, When creating a filter and hovering mouse over the custom tab, the right border is missing in the right tab.
  • Data Wrangling: Right hand-side step pane is not displayed when selecting a data frame that uses a data source extension but the extension was not installed.
  • Data Wrangling: System Locale was not affecting result of month function and shows English names.
  • Data Wrangling: When creating multiple tokens inside a ‘Replace Values with New Values’ step, the dialog for the new token did not show an expected result.
  • Data Wrangling: The ‘Duplicate’ icon did not show up when there was only one token in the Mutate / Filter steps.
  • Chart: “Map - Extension” showed an error dialog if you assigned a logical column to Color By and choose “ALL” for the aggregation function.
  • Chart: After deleting a step that caused the missing column issue for a chart, the chart did not get updated.
  • Chart: Applying “As int10” function against the ‘difftime’ data type columns failed with an error “No method asJSON S3 class: difftime”
  • Chart: Axis range setting should be ignored if “Sync Axis” option is disabled.
  • Chart: The column assignment area (left side) became blank if you click the format button in the column selection dialog of the Table.
  • Chart: Chart filter failed with an error “TypeError: Cannot read property ‘formType’ of null” for some occasions.
  • Chart: If you used a column with special characters for Y-Axis and tried to click the “Exclude” menu in the popup, Exploratory app hung.
  • Chart: Line chart shows an error dialog if a column used in the Limit at Color becomes unavailable by the step change.
  • Chart: On a low resolution Windows PC, after selecting an aggregation function on the Filter dialog, the entire UI pushed up.
  • Chart: Pivot Table failed with an error dialog if you renameed or removed a column that is used in a custom calculation.
  • Chart: Sort by frequency option didn’t work for the Pivot Table.
  • Chart: When a step, which is referenced by a chart, had an error, the error message mentioned a wrong step name and the error didn’t go away even after the chart’s pin was pointed to an non-error step.
  • Chart: When disabling a column used for the color, it showed ‘object not found error.’
  • Chart: Long/Lat Map: You couldn’t assign a column to Size if “(Row ID)” is assigned to Group By.
  • Analytics: Axis order doesn’t change even if you check “Sync Y Axis” option in the Contribution chart in Chi-Square Test.
  • Analytics: Unchecking the “Sync Y-Axis” option didn’t adjust the Y-Axis under the Prediction tab.
  • Analytics: If you import a project that contains a data frame created by “Save Chart Data as Data Frame”, it shows an error dialog with “Error in gzfile(file, “rb”) : cannot open the connection”.
  • Analytics: Prediction Matrix: Columns with only 0 values used to be dropped, but now it is reserved.
  • Analytics: The random seed is set at each group level when the Repeat-by is used for more stability in the results.
  • Parameter: Dynamic Slider: Min/Max value was not properly set when there is a Group By step.
  • Parameter: When changing parameter type from Slider to Text Input, it was still showing the data frame selector.
  • General: Improved the error message for the proxy network setting.
  • General: With R 4.0.3, Date operations that involve timezone raised an error “Unrecognized timezone”.
  • General: Improved an overall performance for opening / closing projects and moving between data frames and views.
  • Installation: Windows: When User’s home directory contains Japanese characters, the selected custom folder name was not properly displayed.

6.2.2

Released on 10/16/2020.

Bug Fixes

  • Data Source: Re-Import menu showed the “Re-import All the Related Source Data” option for a branch even if it doesn’t have any related data frames.
  • Generic: When closing a project, ‘nw.gui’ error was raisd for some occasion.
  • Parameter: After changing the Slider type parameter’s type from Dynamic type to Static type, the min and max values of the Slider were still using the values from the previously selected data frame.
  • Project: When using Exploratory Desktop with a Collaboration server, the Account Settings shortcut menu on the Project List was linked to an incorrect URL.

6.2.1

Released on 10/12/2020.

Enhancements

  • Data Wrangling: Expose the confidence interval functions in Summarize dialog.
  • Data Wrangling: Improved label and text of Unnest Wider and Unnest Longer parameters.
  • Data Wrangling: Japanese column name is now highlighted in orange color in Mutate or other expression editor.
  • Data Wrangling: On Summarize Dialog, changed the default preview sample size to 10K rows to make the initial performance better.
  • Chart: Expose the Repeat By Layout Toolbar in Chart.
  • Chart: Support a property to adjust the double click timing for the Chart legend.
  • Chart: Support the custom bandwidth option for Density chart.
  • Chart: Now you can show/hide ‘number of rows’ in the chart popup.
  • Analytics: ARIMA: Seasonal ARIMA parameters can be manually specified now.
  • Analytics: XGBoost: The default validation metrics for the ‘Learning’ is changed to negative log likelihood.
  • Note/Slide: When a note or slide is opened in the Side by Side mode, now the Run button is placed at the preview toolbar.
  • General: Now the Chat Dialog inside Exploratory Desktop shows Japanese User Interface when Exploratory Desktop UI language is Japanese.

Bug Fixes

  • Data Wrangling: On Mutate Step, a token showed “Creating” instead of expression when the it was not saved before closing the project.
  • Data Wrangling: Added calc_confint_mean and calc_confint_ratio under the numeric functions of the column header menu.
  • Data Wrangling: After converting the step to a Custom R Script, you couldn’t get it back even after you clicked the Cancel button.
  • Data Wrangling: Drag and drop a branch data frame root ended up showing “dataframe undefined does not exist in the catalog” error for some occasions.
  • Data Wrangling: When selecting multiple columns for Unite command, the selected column order was not preserved properly.
  • Data Wrangling: On Text Wrangling Dialog, if the “end” input box for the Extract Range of Text was empty, the preview showed duplicated text.
  • Data Wrangling: Syntax suggestion was not suggesting correct candidates when column names with multibyte characters are in the expression in the Mutate step.
  • Data Wrangling: Table View: When collapsing the data frame list on the Analytics View, the table does not use full width after moving to the table view.
  • Data Wrangling: When disabling a step, associated branches now move to the previous valid step.
  • Chart: The Color was not respecting the result of the Limit configuration done for the X-Axis.
  • Chart: Long/Lat Map: Decimal digit setting shouldn’t apply to the number of rows in Popup.
  • Chart: ‘Show detail’ dialog was showing empty when you assigned a POSIXct column at X-Axis with ‘Floor to Month’ function.
  • Chart: When re-opening a data frame, if previously selected step had an error, it showed TypeError: Cannot read property ‘getTransformName’ of undefined when underlying metadata was corrupted.
  • Analytics: ARIMA: In some cases for shorter data, error with message “Column ‘seasonal’ doesn’t exist” was raised.
  • Analytics: Cox Regression Model Step: Residual was missing in prediction result on training data.
  • Analytics: Cox Regression Step: Layout got broken while selecting the predictor variables
  • Parameter: Duplicated parameters were shown in the Parameter Pane if the same parameter was used in the SQL query multiple times
  • Parameter: Filter with “Is In (Multiple Values)” operator with “Ignore Case” option always returned no data even when the Parameter was set to “All”.
  • Parameter: Importing EDF file with parameters failed with error “Cannot read property ‘type’ of undefined”.
  • Parameter: When defining a data frame based parameter, the last step info was not saved when updating a parameter.
  • Install: On Windows, the repository location validation is now prevents it from creating the repository directly under C:/Users directory.
  • General: Accidentally dropping an image file onto Exploratory broke the User Interface.
  • General: Clicking “See all your conversations button” inside Chat Dialog didn’t display the conversations.
  • General: When published to exploratory.io or Collaboration Server, database query returned no data, if the data source was originally imported from a published EDF file.
  • General: On Project List, renaming project was super slow when there are many projects.

6.2

Released on 10/2/2020. Here is a v6.2 release announcement blog post for more details on some of the key new features.

Enhancements

  • Summary: Show Mean and Median reference lines for the numeric and date data type columns.
  • Summary View: It now shows a percentage of each category when you place the mouse over on the bar.
  • Summary: Correlation mode: It now removes NA values instead of treating them as a category.
  • Data Wrangling: Supported Unnest wider and Unnest Longer.
  • Data Wrangling: Supported Disable/Duplicate a step token by clicking icon on the token.
  • Data Wrangling: Introduced a new UI dialog for the conditional replacing values with ‘case_when’.
  • Data Wrangling: Support extracting values from the List column by specifying the name or the position.
  • Data Wrangling: When selecting/removing multiple columns, it now executes the step without showing the column selection dialog.
  • Data Wrangling: Added a series of functions for calculating the confidence interval.
  • Chart: It now support searching column names for the Other Group and the Highlight dialogs.
  • Chart: Now you can manage to show/hide unused factor levels at X-Axis and Color.
  • Chart: Error Bar: Add 3-way button control in “Ratio (%)” Calculation Type mode.
  • Chart: Support “Confidence Interval” option in the Range setting in Line chart.
  • Analytics: T-Test Analytics View: Added the “Difference” tab with error bar chart of mean differences between the 2 groups.
  • Analytics: Added the XGBoost to Analytics View.
  • Analytics: Added the ARIMA to Analytics View.
  • Analytics: Random Survival Forest: Improved the importance evaluation logic to make the result more robust.
  • Analytics: Random Forest: We made the Importance tab to use a bar chart instead of the boxplot to be consistent with other models. You can bring it back by enabing ‘Boruta’ in the property.
  • Analytics: Prediction tab: It now shows ‘Number of Rows’ in the popup for the “Actual” line.
  • Dashboard: Now you can set the row height when the “Fit to Screen” option is off.
  • Parameter: On SQL Editor, changed to show parameter runtime panel when clicking parameter link.
  • Parameter: Supported dynamically querying data for min/max value for numeric parameters or the list of values for categorical parameter.
  • Parameter: Supported “today” as a default value for Date data type and Timezone for Date / POSIXct Parameter.
  • Parameter: It now keeps opening the dialog when clicking the Save button instead of closing it so that you can continue working on other parameters.

Bug Fixes

  • Data Source: With Public Edition, clicking Re-importing button does not reflect the change.
  • Data Source: MySQL: Character column is shown as numeric column in the preview when the value is something like 9E.
  • Data Source: On Google Analytics Data Import Dialog, the “TypeError: Cannot read property ‘some’ of null” error was raised for some occasions.
  • Data Source: Google BigQuery: Corrected the Help Link for the storage bucket creation.
  • Data Source: CSV: When trying to import a CSV file, it failed due to missing Default Encoding for some occasions.
  • Summary: When moving a step while correlation mode is on, if the target column was not available on the moved step, it showed an empty screen.
  • Summary: Correlation Mode: Sorting by the ‘P Value’ didn’t sort the columns properly.
  • Summary: Correlation Mode: When you imported data from the Data Catalog while the Correlation Mode was on, it opened the imported data with the Correlation mode.
  • Summary: Highlight Mode: When creating a chart by clicking on the chart icon while the highlighting column was not selected it showed an error.
  • Data Wrangling: In the ‘Replace Values’ the values shown in the preview table did not honor the levels of a Factor column.
  • Data Wrangling: Custom Step: The Run button did not respond right after you converted the step to a R Custom step.
  • Data Wrangling: The Comment was gone after splitting a step into multiple steps.
  • Data Wrangling: After saving a step as a data frame, switching to the Summary View threw an error sometimes.
  • Data Wrangling: The Comment popup for a step didn’t close even after moving the mouse cursor to the other steps.
  • Data Wrangling: Even after resolving the step error, the step title was still showed in red.
  • Data Wrangling: Select Columns step became empty when the step was created by selecting multiple columns from the column menu.
  • Data Wrangling: An error dialog showed up when you selected “Save Step Data as New Data Frame (Without Steps)”.
  • Chart: Map: The background map image was not showing up.
  • Chart: Map: type dropdown didn’t close when you opened the dropdown and clicked outside the dropdown area.
  • Chart: Map: Standard map failed to render if the column for the State name was renamed.
  • Chart: When you exported a boxplot chart as a data frame, the column names for ‘1Q’ and ‘3Q’ were reversed.
  • Chart: The Axis range setting for the X-Axis didn’t work when you used the Repeat By.
  • Chart: Table: Column Selection was cleared when the selected column was removed from a step
  • Chart: Error Bar: The Limit with “Current Y column” didn’t work with the “Ratio(%)” Calculation Type.
  • Chart: Pivot Table: Fixed the text color of the “Viridis” color palette.
  • Chart: Clicking “Add to Dashboard” icon didn’t work.
  • Analytics: When you created a new analytics and published it immediately, the thumbnail image didn’t show up on the published analytics.
  • Note: Clicking a URL link in a Note in the single view mode, it opened up another desktop window where it should have opened a web browser.
  • Dashboard, Slides, Note: It now updates the charts directly inside the Dashboard, Note, and Slides instead of refreshing the whole page.
  • Dashboard: Could not get out of the project nor open the dashboard once clicking an url link from the dashboard edit window.
  • Dashboard: It takes a long time to preview a dashboard when resizing the window size.
  • Slide: When you click the “Refresh” button, it now stays on the currently opened page in the preview.
  • Publish: Canceling the ‘publish’ ended up restarting an R session.
  • Publish: The Lock icon remains on the published contents even after switching the mode from Private Share to Public Share.
  • Parameter: A ‘name conflict’ error was shown if the Save button was clicked for the second time.
  • Parameter: The parameter pane was kept opened even after selecting a different dashboard
  • Parameter: An error “Cannot read property ‘querySelector’ of null” was shown after being a long time opening the parameter pane for Dashboard sometimes.
  • Parameter: The name conflict error was shown when you renamed a parameter, moved to other parameters, and clicked the Save button on the Confirmation Dialog.
  • Parameter: The display name was not properly shown for the dropdown type parameters.
  • Project: When opening a project with the Safe Mode, it didn’t skip loading the custom R Scripts created for the project.
  • General: An error dialog showed up when you duplicated a data frame that pointed a data file which didn’t exist anymore.
  • General: When trying to exit project, ‘Extension context invalidated’ error was raised for some occasions.

6.1.3

Released on 9/11/2020.
  • General: Failed to perform “Save Step Data as New Data Frame (Without Steps)” and showed “cannot open the connection” error.
  • General: An error message showed up after duplicating a data frame if the source data file didn’t exist in the local filesystem.
  • Data Wrangling: After selecting columns from column menu on the Summary View or the Table View, the Select step became empty.

6.1.2

Released on 8/25/2020.

Enhancements

  • General: Upgraded the broom package to 0.7.0.
  • General: Switched to Parquet file from RDS file for the data saving. This improves the file read/write performance about 10x faster.
  • Data Source: Google Sheet: Supported accessing sheets in the Shared Drives (a.k.a. Team Drives).

Bug Fixes

  • General: When dragging a mouse inside input field toward the edge of the dialog to select text, it caused the Dialog to be closed.
  • General: When closing Exploratory, ‘No window with id: 5’ error was raised for some occasions.
  • General: When closing Exploratory, ‘Extension context invalidated’ error was raised for some occasions.
  • Data Source: ODBC: On Schema Tree, changed to sort the table and view names alphabetically.
  • Data Source: Changing the data source to the ‘data catalog’ type didn’t work
  • Data Source: When importing a file with long path name, the file path name was not shown properly.
  • Data Source: PostgreSQL: The Preview failed and showed “No method asJSON S3 class: pq__text” if you have a column with text[] data type.
  • Data Source: Google Sheets: Could not get data from Google Sheets when the selected sheets is only accessible by id.
  • Data Source: Google BigQuery: When streaming data with many columns, some columns contained missing values.
  • Summary View: After exiting from the highlight mode, the ‘unique value’ was still showing the values for the highlighted.
  • Summary View: When an analytics raised an error on the analytics view, moving to the Summary View showed a blank screen.
  • Summary: Pop-up shows up always at the left side when you hover the histogram in Summary view.
  • Table View: Clicking on the Filter’s LOV made the dialog closed at the first time.
  • Table View: Popover text box for the Table Filter Token was too long with unnecessary space.
  • Data Wrangling: When a step had an error on Analytics view, analytics column selector widgets became disabled and could not change them even after moving to a valid step.
  • Data Wrangling: When the step cache was removed, the step was unnecessarily recalculated even when the step was already up to date.
  • Data Wrangling: When navigating to a build model step, it tried to show the table view when it should be showing the model summary view.
  • Data Wrangling: The Step token label text was removed after adding a Filter Step.
  • Data Wrangling: When opening the Export to Google Sheet Dialog, the Sheet list was empty.
  • Data Wrangling: After importing a data, a step selection in right hand-side step list was removed for some occasions.
  • Data Wrangling: The Tokenize Text (No Space Between Words) step failed when selecting TRUE for the ‘Keep Other Columns’ parameter.
  • Data Wrangling: Changed not to multiply by 100 for the % window calculations.
  • Data Wrangling: On Rename Dialog it didn’t select/highlight text when moving between the cells by the tab key.
  • Data Wrangling: Selector widget: Improved the UI by making the selected value font weight as bold.
  • Data Wrangling: Added dense_rank to the Date and POSIXct column header menus.
  • Data Wrangling: Filter: Improved the performance for showing the dropdown values when there are many values.
  • Data Wrangling: When creating a recode step after a group by step, the Recode Dialog showed incorrect values in the table.
  • Data Wrangling: The Summary and the Pivot step UIs’ preview table now shows all the data. You can still limit the rows if you want.
  • Data Wrangling: The Prediction step with cached Random Forest or XGBoost model step failed with an error.
  • Chart: Error Bar: A strange number showed up on Y Axis if you enabled the reference line and used the Horizontal orientation.
  • Chart: The Show Details dialog showed no data when the chart had a chart filter and X-Axis had a numeric column with category function applied.
  • Chart: When creating a chart from the Summary View, an extra space was appended at the end of the chart name.
  • Chart: Map - Heatmap: Circles didn’t show up if there were NAs in the Value column.
  • Chart: Filter token width was not long enough to show the filter condition text.
  • Chart: When transitioning from Chart view to Summary view, it pushed the UI down for a second.
  • Chart: Quantile dialog position was incorrect and input field validation was missing.
  • Chart: Map - Long / Lat: The larger circles are shown under the smaller circles so that you can click on any circles.
  • Analytics: Random Forest Step: On Windows, when creating a build model step, number of rows for test data was not displayed on Model Summary View when UI language was Japanese.
  • Analytics: NAs in the target variable is now filtered out before building the prediction models.
  • Analytics: When changing the Analytics Type to the one that does not support Repeat By like Normality Test, the previously selected Repeat By column was not cleared and it ended up showing an unexpected result.
  • Analytics: Survival Curve: ”%” was missing for the survival rate displayed on the mouse-over pop-up.
  • Note: After previewing a note, the last scrolled position was not remembered and it went back to the top of the content.
  • Publish: When the publishing failed, a proper error message was not shown.
  • R Package: Improved style for Tabs and Table inside the R Package Management Dialog.
  • Project: When there is an warning icon next to a project, mouse hovering the icon didn’t show the warning message in the instant pop-up.

6.1 (6.1.1)

Released on 8/4/2020

Enhancements

Summary View
  • Summary: If you use “Ratio” mode in the Highlight view, it should show bars with higher ratios instead of showing bars with larger number of rows.
Data Wrangling
  • Data Wrangling: List of Values widget now supports adding a new option by typing and it also supports clearing selected options at once by clicking ‘x’ button.
  • Data Wrangling: Changed display label for ‘Mode’ to ‘Mode (Most Frequent)’.
  • Data Wrangling: On Filter Dialog, moved the ‘Ignore Cases’ and ‘Keep NA’ checkboxes after the Value input field.
  • Data Wrangling: Filter: Changed the Date filter default operator to “Equal To”.
  • Data Wrangling: Filter Dialog: Improved Column Selector style for mouse hover.
  • Data Wrangling: Supported “This Half Year” option for Date filter.
  • Data Wrangling: Filter: Moved “Equal To” operator position to after the “Is FALSE” for logical filter.
Chart
  • Chart: Now you can show the range for the vertical reference line in Histogram and Density Plot.
  • Chart: Pivot: Now you can choose whether you apply the URL encoding or not for parameters in a URL links.
  • Chart: Reference line popups by hover should show confidence interval information as well.
  • Chart: Chart filters created by selecting Include/Exclude menu now use custom condition so that you can edit.
Analytics
  • Analytics: Anomaly Detection: “Alpha” property was renamed to “P Value Threshold” for better understanding.
  • Analytics: Time Series Forecast: X-axis tick labels of Yearly Trend chart had unnecessary “01” day field in addition to the month name. They are now removed.
  • Analytics: Renamed ‘Correlation by Columns’ to ‘Correlation’ and ‘Distance by Columns’ to ‘Distance’.
  • Analytics: Time Series Forecast: Maximum supported number of External Variables is increased from 5 to 25.
  • Analytics: When switching between different analytics types, the target column and the predictor columns are now preserved.
  • Analytics: Prediction tabs (partial dependence plot): For a logical predictor, now we arrange the X-axis in TRUE, FALSE order rather than sorting by Y-axis predicted values.
  • Analytics: Cox Regression/Survival Forest: X-axis of Prediction chart (partial dependence plot) for categorical predictor is now sorted based on Y-axis predicted values.
  • Analytics: Cox Regression/Survival Forest: Default pick of prediction time period is now mean of survival times of observations with event. This usually gives better view of effect of the predictor variables.
Parameter
  • Parameter: Support for arguments to control quoting and escaping of @{} parameter placeholders in SQL or MongoDB query.
  • Parameter: Improved Slider widget to show selected value dynamically while sliding.
  • Parameter: On Filter Dialog, resulting R script now shows ’@{}’ notation instead of internal ‘exploraory_env$’ notation for parameters.
  • Parameter: Introduced new Date/Time Picker for better usability.

Bug Fixes

  • Data Source: Google BigQuery: When importing data, it sporadically failed with error “Invalid value at ‘start_index’ (TYPE_UINT64), “3e+05” [invalid]”.
  • Data Source: Google BigQuery: When there were more than 100 datasets under a project, not all the datasets were displayed.
  • Data Source: Excel: Reading excel files with multibyte path or filename raised an error.
  • Data Source: Web Scraping: Encoding option was not working properly.
  • Data Source: ODBC: Views are not displayed on the left-hand side schema tree.
  • Data Source: Data Connection information is now managed separately from the Data Source step on the exploraotry.io server, or the upcoming release of Collaboration Server. This means that if setting of a Data Connection changes, you only need to publish one Insight with the Data Source, instead of publishing all the insight with the updated Data Connection.
  • Summary: A column selected for Correlation was not saved after creating a chart from summary view and coming back to the summary view.
  • Summary: When switching to the correlation mode, selected column and other fields are not shown while waiting for correlation calculation.
  • Summary: With Highlight mode, when a column is not selected, TypeError: Cannot read property ‘escapedName’ of undefined error is raised for some occasions.
  • Summary: Column name became shorter in the summary panel if you ran the Highlight in Summary View, moved to Analytics View, and came back.
  • Summary: Correlation calculation was not skipped when a column was not selected nor the selected column was invalid.
  • Table View: Vertical grid lines didn’t align vertically between the table header and body in Windows.
  • Data Wrangling: Filter: A selected aggregate function got reset to the default after selecting different column.
  • Data Wrangling: The Recode dialog showed an error when it has “FALSE” as an original value
  • Data Wrangling: Error “ProjectDir.getObject: Metadata file not found in project:” was raised for some occasions.
  • Data Wrangling: After copying a folder with data frames, the source token of the copied R Script data frame did not show label.
  • Data Wrangling: On Filter Dialog, changed the label from Range to Option for Outlier operator.
  • Chart: Shor Detail: Number of rows in a table doesn’t change when you change the “Rows to show” dropdown to the other values.
  • Chart: Show Detail: It doesn’t shows no rows if a logical condition with a categorical column such as JobRole == “Sales Rep” is applied at Color.
  • Chart: Boxplot: You cannot change/reset the sort option because it is disabled if a numeric column is assigned to X-Axis.
  • Chart: When creating a chart filter, ‘Day of Week’ list of values didn’t show locale aware values.
  • Chart: Window calculation name repeats in a hover popup if you turn on “Show function name” option in the chart property dialog.
  • Chart: Chart filter dialog was not automatically closed when moving to Analytics or other views.
  • Chart: Table: URL link points incorrect URL if you sort a table by clicking the table column header.
  • Chart: Number: Thumbnails was removed after clicking the OK button on Title / Comment dialog without changing anything.
  • Chart: Pivot: When you assigned a Date or POSIXct column with “Extract Day of Month” option, the day of month numbers were sorted as text.
  • Analytics: Prophet: When deleting an External Predictor column, the function assigned to the deleted column was assigned to the next External Predictor column.
  • Analytics: When clicking the Run button for Analytics, it didn’t properly check if there was another R process running.
  • Analytics: When Switching analytics type from Cox regression to Survival Forest, Start and End date column selections were removed.
  • Analytics: Result of Variable Importance (permutation importance) was affected by the order of predictor variables, but now it always returns a same result regardless of the predictor variable order.
  • Analytics: Prediction with Random Forest Model Step on another Data Frame raised error when the other Data Frame did not already have a target variable column.
  • Analytics: “Cannot Combine” R error showed up if you set “Auto” at Period and used Repeat By in COX Regression.
  • Analytics: Other Group setting green text didn’t show up automatically when you assigned a character column with a lot of unique values to Repeat By in Survival Curve and COX Regression.
  • Analytics: Cox Regression: Repeat By column selector disappeared right after assigning a column
  • Analytics: Random Forest: Predictor variables of insignificant importance on Boruta boxplot was not sorted properly.
  • Analytics: Variable Importance: P Value of categorical predictor variables were displayed as (NA) under some perfect collinearity cases.
  • Reporting: Unexpected “No search result” text showed up in the Analytics Chart picker dialog in Note, Slide and Dashboard.
  • Reporting: Charts in Notes, Slides and Dashboards sensitive should be sensitive to the UI language setting.
  • Reporting: Published date is not shown on the Publish Dialog header area.
  • Dashboard: Chart thumbnail was not updated after updating the display name in Number.
  • Dashboard: Chart returns no data if more columns are added to the data source and those new columns were used in the chart.
  • Dashboard: Text overflows from a text panel if you have text with a lot of line breaks.
  • Note: Dependency from embedded R code to Data Frames were not handled properly when there were spaces before the triple-backtick.
  • Note: When moving between notes, the content get overridden by the old content of the same note.
  • Parameter: The number of rows information was not updated in Chart view when updating the Parameter values.
  • Parameter: Parameters imported with EDF file were not immediately available after the import.
  • Parameter: After changing the order of the Parameters in the layout setting, sometimes it was not saved.
  • R Package: On R package Dialog, an error message from the previous installation was kept being shown even after installing another package.
  • R Package: When the installation of R packages failed due to a package loading problem, both the success and the failure messages were shown at the same time.
  • General: Rserve process remaining from the previous time the Exploratory Desktop was up prevented starting up of Exploratory Desktop.
  • General: The in-app chat window was not available right after Exploratory Desktop was installed.

6.0.3

Released on 6/23/2020 This release is to certify R 4.0. The installation of v6.0.3 will automatically install R 4.0, which will make all the R packages you have installed in the past invalid and you will be asked to re-install them so that they will be compatible with R 4.0.

Enhancements

  • Summary: On Summary View, the Correlation/Highlight mode is now kept even after a wrangling step is added, updated, deleted, or moved to a different wrangling step.
  • Chart: Chart now keeps the column assignments (with warning icons) even when the columns don’t exist at the current step.
  • Chart: The Custom Calculation dialog shows a hint text along with an example.
  • Chart: Changed the default number for the Limit’s Top/Bottom setting.
  • Reports: When inserting a Chart/Analytics to a Note or Slide, it now adds the title of the Chart/Analytics along with the comment text.

Bug Fixes

  • Data Source: Google Sheets: When upgrading Exploratory Desktop from a version before 5.5 to the 6.0, there was a case that old OAuth token was mistakenly used and 403 permission denied error was raised.
  • Chart: Error Bar: Number of TRUE calculation was incorrect in Ratio mode.
  • Data Wrangling: Clicking the help URL link on the Add Row Dialog didn’t open the help page.

6.0.2

Released on 6/13/2020.
  • Data Source: MySQL: Changed default data type from integer64 to numeric for bigint data.
  • Summary: If POSIXct column has an NA value in the first row, it does not show the timezone info in Summary view.
  • Data Wrangling: After deleting a step, Table View did not get refreshed.
  • Data Wrangling: Clicking a link inside popup help didn’t open external browser and showed the linked page content inside Exploratory Desktop.
  • Data Wrangling: When selecting the Rename from the column header menu, the Rename dialog did not show up if the previous step was also the Rename.
  • Publish: Comment is now supported when Publishing Note, Dashboard, Slide, Data, Chart, and Analytics and these comments are shown under the History on exploratory.io cloud server or Exploratory Collaboration Server.
  • Chart: Unexpected ”%” signs showed up in Line chart if I set Color, used ”% of” window calculation and turned on “Show Values on Plot”.
  • Chart: Standard Map: Zoom level was not saved when you changed a column assignment.
  • Chart: After updating a step, it cleared column assignments made to a Pivot Table.
  • Publish: “Add or Remove Users” link is added to the Publish dialog for Data, Charts, and Analytics.

6.0.1

Released on 6/4/2020.

Enhancements

  • Summary/Table: Now it supports “Case Insensitive” option for the text filter condition.
  • Data Wrangling: Now the “Not Equal” operator has an option to either keep NA or remove NA.
  • Data Wrangling: On Custom R Script editor and R Script Data Source Import Dialog, added available keyboard shortcut list such as ‘Command + /’ for comment out.
  • Data Wrangling: Added ‘Keep NA’ option to the Filter’s ‘Not Equal’ operator.
  • Chart/Analytics: Changed the filter button color to white.
  • Analytics: Binning/Other Group support in explanatory variables.
  • Analytics: Error bar charts for ANOVA and Kruskal-Wallis test are now sorted by mean of the categories.
  • Analytics: Prediction tab for Linear Regression now shows the coefficient and p value in the chart pop-up.
  • Data Source: We now support the scheduling for Treasure Data, Weather Data, and Stock Prices Data at Exploratory Cloud (exploratory.io) and Exploratory Collaboration Server.

Bug Fixes

  • Summary: The column search box overflowed if the data wrangling step pane was hidden.
  • Summary: ‘Other’ category was showing 0 in the Highlight mode.
  • Summary: Duplicated column names were shown in the column selection dropdown in the correlation mode.
  • Data Source: Removed unnecessary ‘Detect Data Type’ checkbox from the Data Catalog’s data import dialog.
  • Data Source Extension: New Version available message was displayed incorrectly even if there was no new version.
  • Data Source Extension: Weather: Selecting the station name with the arrow keys was not working properly.
  • Data Source Extension: Weather: Some of the station names were duplicated or truncated.
  • Data Wrangling: The work-in-progress step with an error now have the delete icon so that users can delete it explicitly.
  • Data Wrangling: Rename and Text Wrangling Dialog didn’t work with a column whose name contains special characters such as backslash "".
  • Data Wrangling: Opening a data frame exported from Analytics hangs in some occasions.
  • Data Wrangling: The Data Frame dropdown list inside the Merge dialog was not displayed when a Note is opened with a separate window and there was a folder in the data frame list.
  • Chart: Map - Standard: Japan Prefecture: “Kyoto” was not mapped correctly.
  • Chart: Chart rendering failed with an error when double quotes are used for the display name inside the Edit Display Name dialog.
  • Analytics: “Group” dropdown selection was reset if you moved to the other Analytics tabs.
  • Parameter: When binding large numeric value such as 100000 to a SQL query, the numeric value became scientific notation and made the SQL query invalid.
  • General: Clicking the Cancel button was showing an error dialog.

6.0

Released on 5/19/2020.

New Features / Enhancements

  • Summary View: Added a new ‘Highlight’ mode to highlight a matching data based on a condition you create.
  • Summary View: Added a new ‘Correlate’ mode to explore the correlation among the variables.
  • Summary View: Switched to a parallel processing engine to calculate the chart data and the metrics.
  • Table View: Added Filter support.
  • Data Source: Weather Extension Data Import now supports list of values for Country Network and Station parameters.
  • Data Source: Added a support for Timezone for the CSV Import.
  • Data Source: Google Sheets: Added ‘Auto Detect Data Type’ checkbox next to Run button.
  • Data Wrangling: Added ‘Remove Outliers / Keep Outliers’ as the Filter’s operators.
  • Data Wrangling: Added ‘Previous’ and ‘Next’ options for Window Function column menu.
  • Data Wrangling: Added an encoding property inside the Merge Data with ‘bind_rows’ option.
  • Data Wrangling: Added a Window Calculation menu for the Date and POSIXc columns.
  • Chart: Added the ‘Limit’ feature for Group By, Repeat By and Color By options.
  • Chart: Added an ‘Odds’ calculation for the Logical data type columns.
  • Chart: Error Bar: The Reference Line is now supported for Error Bar.
  • Chart: Heatmap: It now exports the data as it is shown in the Heatmap chart, which is in the wide format rather than in the long format.
  • Chart: Map: Added a ‘Standard’ type to make the map creation easier. This is only for World Countries, US States, US Counties, Japan Prefectures for now.
  • Chart: Map: Supports more granular level of the zoom in and out.
  • Chart: Support multiple reference lines for X-Axis.
  • Chart: Support showing the label text for the X-Axis reference lines (the vertical ones) on the plot area.
  • Analytics: Survival Forest: We have added a new Random Survival Forest under the Analytics View
  • Analytics: Cox Regression: We have added a Prediction tab (partial dependence plot) to show the predicted values based on the predictor values.
  • Analytics: Cox Regression: Added a Data tab to show the prediction result.
  • Analytics: Cox Regression: Added ‘Outlier Removal’ as the data pre-processing section in the property.
  • Analytics: Cox Regression: Added an Importance (variable importance) tab to show which predictor variables are more important.
  • Analytics: Cox Regression: Added a Survival Curve tab to show impacts on the survival curve for each predictor variable.
  • Analytics: Survival: Added the “Auto” mode for the Period, which sets an appropriate period based on the data.
  • Analytics: We have added Permutation Importance for all the prediction models including Linear Regression, Logistic Regression, GLM (Poisson, Binomial, and Gaussian families), Cox Regression, Random Survival Forest. Decision Tree and Random Forest have already been using it. With this, you will have a consistent way for looking at the importance among the models.
  • Analytics: We have added the ROC tab to show the ROC curve for Binary Classification types.
  • Analytics: Charts under the Prediction tab (as formally known as “Effects”) are now sorted based on the variable importance scores.
  • Analytics: Survival Curve: We have combined the Survival Curve and Survival Curve with Confidence Interval tabs into one. Now you can control whether showing the confidence interval or not by clicking on a radio box.
  • Analytics: Added ‘Effect Size (Epsilon Squared)’ for Kruskal-Wallis Test.

Bug Fixes

  • General: After canceling a process, an error dialog with ‘This process is canceled.’ message showed up where it was not needed.
  • General: When opening a project, the Chat icon was displayed even when you didn’t click on the ‘Questions?’ button.
  • General: The ‘Latest Version Available’ Button was not displayed even though new version was available.
  • General: When a connection error happens, could not go into offline mode even after clicking the ‘Go Offline Mode’ button on Connection Error Dialog.
  • Data Source: Could not Import an EDF file if it included sample data with invalid Japanese characters.
  • Data Source: Fixed incorrect help link for MS SQL Server Connection.
  • Data Wrangling: Removing Cache from a step didn’t update the cache stale status.
  • Data Wrangling: On the Filter Dialog, it didn’t clear the value when switching the column selection to a column with a different data type.
  • Data Wrangling: On Windows, “Replace Values” Step (recode and case_when function) on a multibyte character column broke encoding property of the column, which caused garbling of the texts in later steps such as Merge Step.
  • Data Wrangling: When exporting POSIXct data to a CSV file, it didn’t honor Timezone information and exported it as UTC.
  • Data Wrangling: When column names used in an expression contain certain Japanese characters, ‘Only ASCII characters are supported’ message was displayed in Mutate Dialog.
  • Data Wrangling: On Windows, after merging data frames, Japanese data got garbled.
  • Data Wrangling: One Hot Encoding did not work in Japanese UI.
  • Data Source: After OAuth token sync was done, it still opened the Add Connection dialog where it shouldn’t.
  • Data Wrangling: Removed unnecessary sub-menu under ‘Remove Columns’ from multi column menu.
  • Data Wrangling: Chart Filter didn’t recognize the updated column data type.
  • Data Wrangling: Analytics under a branch data frame disappears when the parent data frame’s step was deleted.
  • Data Wrangling: When hovering a mouse over Remote File Data Source Step, the URL for the remote file was not fully visible.
  • Chart: The Show Detail Dialog didn’t show data for a Heatmap when the X or Y axis is categorized.
  • Chart: Error Bar: Ratio calculation was incorrect when ‘Number of Rows’ was assigned to Y Axis.
  • Chart: Now clicking ‘Cancel’ button in the custom function dialog would ask whether you want to delete the custom function when you have an invalid expression.
  • Chart: When an OAuth token expiration is detected while refreshing the chart data, it would open the re-authorization dialog.
  • Chart: Show Details Dialog didn’t show any data when assigning a numeric column to Color with ‘Outlier’ categorization being applied.
  • Chart: The sort icon was not shown in the Pivot Table’s total column header when embedded in Note.
  • Chart: When navigating between data frames, Chart or Analytics level filter buttons were truncated.
  • Chart: Negative numbers as the Cutting Point values were not handled correctly in Category Setting dialog.
  • Chart: Custom Calculation dialog shows an error “Object Custom not found” when you use the ‘Limit’ in Bar chart.
  • Analytics: When moving among analytics chart tabs, unnecessary thumbnail generation happened even when there was no update.
  • Analytics: On Windows, the bottom of the Column Selection Dialog was not fully visible when creating a Logistic Regression Analytics.
  • Analytics: ‘(NA)’ group showed up at the top in the “Group” LOV in Cox Regression.
  • Analytics: When an analytics metadata file was broken, it didn’t open the data frame properly.
  • Analytics: Correlation: Selecting “Only lower triangle” option in the property caused an error.
  • Analytics: XGBoost: It now works with data with NAs.
  • Analytics: When you run Random Forest, it shows “TypeError: r[e.facet].push is not a function” error if you have a text ‘map’ in the column name for ‘Repeat By’.
  • Analytics: The metrics of F Score, Precision, Recall, Accuracy Rate were not consistent between the Step and the Analytics view for Random Forest because the underlying model parameters were using different default values. The model parameters including the random seed and the number of trees are now set to the same default values.
  • Note: Numbers in Table became links if you viewed an exported HTML on Windows Edge
  • Note: Refreshing a note showed an error when the referencing analytics was already removed.
  • Dashboard: Thumbnail image for a chart and analytics didn’t show up when it’s added to a dashboard by clicking the “Add to Dashboard” button.
  • Dashboard: Creating a dashboard with duplicated name was not prevented.
  • Dashboard: When opening a chart on a main Window from a Dashboard in a separate window, “Add To Dashboard” dialog in a main window didn’t respond and prevented any operation on main window.
  • Dashboard: When the thumbnail image was not available, the description for ‘Number’ chart was displayed outside of the layout box.
  • Parameter: Default value was not set on a numeric multi-select list of values.
  • R Script: Supported ‘Control + /’ (Command +/ for Mac) shortcut key for comment out multiple lines R script.

5.5.6

Released on 4/22/2020
  • Summary: It showed NaN for the Unique Values when a character data type column had NA values.
  • Data Wrangling: Copying a Data Wrangling step and pasting it multiple times could break the data frame.
  • Chart: The number of rows showed an incorrect value in the ‘Show Detail’ dialog when you use a Window Calculation (% of Total) with ‘(Number of Rows)’.
  • Chart: When you created an invalid Custom function and clicked the ‘Cancel’ button in the dialog it didn’t clear the invalid entry. This caused an error when you returned to this chart from other charts.
  • Analytics: An error dialog with “Cannot read property ‘0’ of undefined” showed up when opening a data frame on rare occasions
  • General: The ‘Latest Version Available’ button was not displayed on the Project List even when a newer desktop version was available.

5.5.5

Released on 3/20/2020
  • Project: When opening a project that has a Date parameter, there was a case that it showed “e.replace is not a function” error and couldn’t open it.
  • Data Wrangling: Saving a step as a “New data frame without steps” incorrectly kept the grouped state where it shouldn’t.
  • Data Wrangling: Date Filter: ‘This Month’ option did not work for a POSIXct column when the timezone for the column is different from the system timezone setting.
  • Data Wrangling: When selecting multiple columns then open the Column Selection Dialog, the dialog didn’t show the columns as selected.
  • Chart: A column dropdown list was not shown correctly when ‘Keep’ option was selected for Other Group setting.
  • Chart: Histogram: Bucket range info was incorrect in the hover popup of the cumulative sum reference line.
  • Chart: Error Bar: It should show 100% bars in Ratio Mode when the group by setting is ‘X Axis’ and ‘Number of Rows’ is assigned to Y Axis.
  • Chart: Error Bar: Make the ‘95% Confidence Interval’ the default.
  • Chart: Pivot failed to render and showed an error “Cannot read property ‘length’ of undefined”
  • Chart: Show detail dialog showed an incorrect number of rows if ‘Number of Rows’ was assigned to Y Axis in Bar.
  • Analytics: Add “Number of Rows” information to the Summary table for T-test and Wilcoxon test.
  • Analytics: When an Analytics tab was ‘Pinned’ to a particular step and the step was deleted, running the Analytics showed ‘Required metadata is not available’ error.
  • Analytics: Effects by Variables: Increased the number of variables setting to 20 by default.
  • Analytics: Logistic Regression: Coefficent (Significant) tab was still showing not significant variables when Repeat By is used Analytics: Logistic/GLM: ‘Effect by Variables’ setting in the property was missing.

5.5.4

Released on 3/16/2020

Enhancements

  • Data Source: Google Analytics: Changed ‘Hour of Day’ dimension label to ‘Date/Hour’.
  • Data Source: Google Analytics: Supported Timezone Parameter and added more ‘Last N Date’ related options.
  • Data Source: Supported MS SQL Server Data Source without DSN.
  • Data Wrangling: Added ‘Use ”.” to represent the columns. e.g. log(.)’ message inside the ‘Create Calculation (Mutate) for Multiple Columns’ dialog.
  • Data Wrangling: Supported “Add Row Number” option under the Plus button menu.
  • Chart/Analytics: Added “Styling with Markdown is supported” text and help link at description fields in Comment / Rename Dialogs.
  • Analytics: Decision Tree: Charts in the Effects of Variables tab are now sorted by the variable importance scores.
  • Analytics: Effects by Variables: Categorical predictor values on X-axis are now sorted by the predicted values.

Bug Fixes

  • Data Source: Google Sheets: Inside the Data Source step, sheet title was showing the title of the first sheet even when you selected a different sheet.
  • Data Wrangling: Tokenize Text: Selecting ‘Yes’ for ‘Keep Original Column’ parameter didn’t save the original column.
  • Data Wrangling: Sample Step raised error if data had fewer rows than the specified sample size.
  • Data Wrangling: Removed the sub menu items under “Select Columns” of the column header menu when multiple columns were selected.
  • Chart: Error Bar: In ‘Ratio’ mode with grouping by ‘X Axis’, the percentage is now calculated with devision by the numbers for each X-axis, as opposed to devision by the total number for all the X-axis values.
  • Analytics: Effects by Variables: Confidence intervals of “Actual” lines/dots for binary classification now correctly uses confidence interval of population proportion.

5.5.3.7

Released on 3/5/2020

Bug Fixes

  • Analytics: Linear Regression: Variable Importance: The variable names at X-Axis were wrong.
  • Analytics: Prophet: MAPE was using percent as the unit, but it’s now changed to 0-1 scale just like MASE.
  • Data Source: Google Sheets: Upgraded to use Google Sheets V4 APIs instead of V3.
  • Data Source: Google Sheets: Now it correctly detects the Date/POSIXct data types.
  • Data Source: Google Sheets: Introduced a Timezone parameter in the data import dialog.
  • Data Source: For Stripe, MailChimp, and Google Analytics Data Sources, the Last N Years parameter did not work when you run it on Feb 29 in the leap year.
  • Data Wrangling: Added ‘Count Text Pairs’ option to the column header menu.
  • Data Wrangling: After converting POSIXct column data type to Date, the spin icon did not go away and could not navigate from the Summary View to other views like Table View.

5.5.3

Released on 2/28/2020

Bug Fixes

  • Data Source: Mongodb: Support DNS Seedlist connection to support cluster environments.
  • Data Wrangling: Summarize/Pivot: Support POSIXct (Date/Time) Functions such as ‘Round to Hour’.
  • Data Wrangling: Summarize/Pivot: Date was not rounded to year when it’s opened from Column Menu
  • Data Wrangling: Support creating a new data frame based on a selected Step with and without the Steps.
  • Data Wrangling: The Step menu of a pinned step did not show icons for Cut Step and Copy Step menu items.
  • Chart: If the Step cache is removed, refreshing the chart failed with object not found error.
  • Chart: Support POSIXct (Date/Time) Functions such as ‘Extract Hour/Minute/Second’.
  • Analytics: Prophet: The internal model was rebuilt every time when you opened the projects.
  • Analytics: Prophet: Order of predictors in the legend of additive effect chart does not correspond to the order of the column selection
  • Analytics: Prophet: It showed a wrong tab if you switched from the additive mode to the multiplicative mode while you were viewing ‘Effects’ chart.
  • Analytics: Prophet: Bars on under the Importance tab should be sorted by the importance scores.
  • Analytics: Number of Columns LOV was reset if you went to the other tabs and came back.
  • Parameter: The parameter was not working for the recently added Filter operators such as “Last N Weeks Exclude Today”.

5.5.2

Released on 2/24/2020 Here is a v5.5.2 release announcement blog post for more details on some of the key new features.

New Features / Enhancements

  • Data Source: Excel: Date column was imported as a numeric column where it should be a Date or POSIXct column.
  • Data Source: Excel Import Dialog: Supported Timezone Parameter.
  • Data Source: MongoDB: Supported Data Connection by Connection String.
  • Data Source: MongoDB: Added ‘Last N Rows’ option.
  • Data Wrangling: Filter: Now the ‘Stop words’ operator supports more languages.
  • Data Wrangling: Supported the ‘Stop Words’ parameter for Tokenize Text Step UI.
  • Data Wrangling: Supported the ‘First Word’ and ‘Last Word’ options for Extract Text.
  • Data Wrangling: Supported remove ‘Full-width space’ and ‘Special Characters’ options.
  • Data Wrangling: Now you can copy and paste the same set of the data wrangling steps to the multiple data frames.
  • Data Wrangling: Supported Chinese, Japanese, Korean, and Vietnamese for Text Tokenize.
  • Data Wrangling: Supported locale argument to ‘Re-Evaluate Data Types for All Columns’.
  • Data Wrangling: Supported ‘Last N Months (Exclude This Month)’ option for Date Filter.
  • Data Wrangling: Added column menu to convert year numbers to Date type.
  • Data Wrangling: Now you can move the ‘Published’ button to other steps by drag and drop.
  • Data Wrangling: Filter: Supported This Year, This Quarter, This Month, This Week, and Today options for Date Filter.
  • Chart: ‘Other Group’ is supported at ‘X Axis’ of Bar, Line, Area, Error Bar, Boxplot and Violin.
  • Chart: ‘Show Values on Plot’ option works on charts even with ‘Repeat By’.
  • Chart: The chart popup shows a number of rows.
  • Chart: ‘Custom Calculation’ is supported in Bar, Line, Area, Bubble chart types.
  • Chart: Now, you can use ‘Repeat By’ for the Horizontal Bar chart.
  • Chart: We now support Error Bar in the horizontal direction.
  • Chart: Support ‘Constant’ option in ’% Difference’ and ‘Difference’ Window Calculations.
  • Chart: Now you can adjust the vertical and horizontal padding between charts in Repeat By charts.
  • Chart: Reference Line: Support ‘Standard Error’ Range Type.
  • Chart: Changed to show ‘Number of Rows’ information inside the ‘Show Details’ dialog.
  • Chart: Support title text alignment option (Left, Center, Right)
  • Analytics: Time Series Forecasting (Prophet): Model Summary view is now shown even when it is not in the Test mode.
  • Analytics: Time Series Forecasting (Prophet): In the Effects chart, the names of the multiplicative external predictors are now shown by the original column names, as opposed to by indexes. (e.g. Predictor 1, Predictor 2…)
  • Slide: Now you can show Table and Pivot Table into a slide without scrollbars.
  • Parameter: When a Parameter is changed, data for Source Steps using the Parameter are kept as “Out-of-Date” cache, instead of just getting removed as being old, to avoid potentially expensive reloading of the data.
  • Parameter: Values of Parameters from the previous session on the project are now remembered and restored.
  • Collaboration Server: Support switching the server between Collaboration Server and Cloud Server when there is a connection error.
  • Collaboration Server: Improved Error Message when Exploratory Desktop is opened with Public Account.

Bug Fixes

  • Data Source: Import Log File Dialog: Hitting the Enter key inside the ‘Skip N Rows’ input field caused unexpected App Restart.
  • Data Source: Google BigQuery: Query result was not refreshed when the data was updated via Google Cloud Storage.
  • Data Source: Google Analytics: Incorrect Data Type was mapped to some of the Dimensions.
  • Data Source: Google Sheet: Improved Error message for the case where a column has only NA.
  • Data Source: Google Analytics: Moved Custom Dimensions and Metrics at the bottom of the list for better scroll search experience.
  • Data Source: Google Analytics: Hour of Day (dateHourMunite) column data type was returned as interger instead of POSIXct.
  • Data Source: Google Analytics: Supported Dimensions and Metrics label translation for Japanese UI language.
  • Data Source: When trying to open MySQL Data Import Dialog, it didn’t open in some situations.
  • Data Source: On MySQL Data Import Dialog, “external pointer is not valid” error was raised when the connection became invalid after certain amount of time.
  • Data Wrangling: Added ‘Cache Step Data’ icon on a step header.
  • Data Wrangling: Opening Text Data Wrangling Dialog for an existing step showed object not found error.
  • Data Wrangling: Chart and Analytics Pins now move to the most previous available step instead of the source step when the pinned step is disabled.
  • Data Wrangling: Summarize Dialog: When Quantile function was selected, it did not keep the entered value when the Cancel button was clicked.
  • Data Wrangling: Could not remove multiple text with ‘Text (Multiple Candidates)’ Option.
  • Data Wrangling: Join Dialog: Data Frame List didn’t show the folder names and the icons.
  • Data Wrangling: Filter: It should keep the filter condition even if a custom expression is removed and the Cancel button is clicked.
  • Data Wrangling: Preview Table showed incorrect data when moving back from the next step.
  • Data Wrangling: When clicking an existing Summarize step, Summarize Dialog sometimes showed object not found error.
  • Data Wrangling: Chart and Analytics Pin should move to the last step when the pinned step was split into multiple steps.
  • Data Wrangling: Filter Dialog: Now it sets a default value for the ‘Last N’ operation.
  • Data Wrangling: When “Replace with New Values” Step was applied on a Japanese column, the column was garbled at a later Merge step.
  • Chart: Error dialog showed up when removing a column selection on a chart filter then click the Run button.
  • Chart: Wordcloud: ‘Minimum Frequency for Words’ option didn’t work if you specify a larger value than the maximum value of the data.
  • Chart: Bar selection wasn’t removed after closing a Popup.
  • Chart: Wordcloud failed to render and showed an error “unable to start png() device”.
  • Chart: Scatter: Values didn’t show up in the plot area if you selected ‘Bar’ marker.
  • Chart: Line: Values on plot didn’t align if a categorical column was assigned to ‘X Axis’.
  • Chart: Switching from Table was slow if you had many columns assigned to the Table.
  • Chart: Highlight: The List of values became empty if you assigned a column, which was used in ‘Group By’, step to Color.
  • Chart: Creating a chart filter failed if a column with a name ‘x’ was assigned to ‘X Axis’ of a chart.
  • Chart: Pivot Table failed to render and showed an error “TypeError: Cannot read property ‘slice’ of undefined”.
  • Chart: Edit Display Name: ‘(NA)’ showed up even when there was no NA.
  • Analytics: When editing existing Analytics, previously selected Variable Columns were not shown on the Column Selection Dialog.
  • Analytics: Linear Regression, Logistic Regression, GLM: Various errors were raised when special characters like parentheses were used in column names.
  • Analytics: Random Forest: With Test Mode and Repeat-By enabled, error in model building was not handled cleanly. Now the error message is displayed in the Summary table in case of error.
  • Analytics: K-Means: When all but one column have constant values, “subscript out of bounds” error was raised.
  • Analytics: PCA: When only one column was specified, “subscript out of bounds” error was raised.
  • Analytics: Decision Tree: “subscript out of bounds” error was raised when the target variable was a character column with values “TRUE” or “FALSE”.
  • Analytics: Correlation by Column: On the Heatmap, white cell with NA was displayed when the correlation was 0, where a gray cell with value 0 should have been displayed.
  • Analytics: Analytics shouldn’t run when you click ‘Apply’ button in the property dialog if not all mandatory fields are assigned yet.
  • Analytics: Resizing the window size reset ‘Number of Columns’ configuration.
  • Note: ‘Not found’ message showed up for a chart even that chart existed if you ran a note right after opening a project.
  • Note: Spin icon on main window disappeared right after the mouse focus moved to a Note window but the spin should remain until the process ends on main window.
  • Parameter: Parameter input fields, list of values, sliders, date pickers should not be updatable when the process is still running.
  • Parameter: Empty Parameter Pane was shown after closing and reopening a project.
  • Parameter: Filter: When a new parameter was created from Filter Dialog, the parameter should be selectable from the parameter list on the Filter Dialog.
  • Parameter: The min value, max value, and step defined for numeric parameters were ignored on the Parameter Pane.
  • Parameter: Supported ‘List of Values (Multi Select)’ for the Logical data type.
  • Install: After installing RTools, Exploratory became unable to open a Project.

5.5.1

Released on 1/26/2020

New Features / Enhancements

  • Data Source: Google Analytics: Added Refresh button to refresh Accounts, Properties, Views, and Segments.
  • Data Source: Google Sheet: Supported Detect Data Type parameter.
  • Chart: Supported ‘Disable’ option for chart filters.
  • Chart: Scatter: LongLat Map: It now supports Binning by Hour, Minute and Second if you assign a POSIXct column at Color.
  • Analytics: ‘Number of Columns’ setting is now exposed at the top of the charts as a dropdown menu.
  • Analytics: Supported Hour, Minutes, and Seconds for POSIXct components for predictors.
  • Analytics: It now supports Binning at Color By and Repeat By.

Bug Fixes

  • Installation: Unnecessary ‘Admin Privilege is required’ error message was displayed on Windows.
  • Installation: The Web Proxy Server input field now prevents an server name entry if it starts with protocols such as http:// or https://, which would cause problem in connecting to the proxy.
  • Project: At closing a project, there were cases where an error dialog showed up with a message “Error Code 127”.
  • Data Source: CSV: Improved an error message for a file character encoding mismatch.
  • Data Source: Google Analytics: Could not update date parameter with Date Picker.
  • Data Source: Google Sheet: Importing a sheet with sparse data failed with ‘Error in nchar(x) : invalid multibyte string’ error.
  • Data Source: Twitter: Search hangs when canceled the previous search and tried a new search.
  • Data Source: Supported ‘Connection Mapping’ dialog that allows mapping connections used in the imported EDF to existing connections.
  • Data Wrangling: The Rename dialog showed an unnecessary vertical scrollbar on Windows.
  • Data Wrangling: Step’s label was broken showing text like “PLACEHOLDER” when column names were numbers.
  • Data Wrangling: Text Data Wrangling: The Preview Table didn’t reflect previous text wrangling results in the same step.
  • Data Wrangling: Text Data Wrangling: Preview data was cleared when the ‘Create New Column’ checkbox was clicked.
  • Data Wrangling: Summarize Dialog: Now it sets the ‘(Number of Rows)’ as a default Value Column when an existing Value Column was removed.
  • Data Wrangling: Filter: Improved logical operator dropdown style.
  • Data Wrangling: Filter: Now numeric input fields prevent unwanted non numeric text entry.
  • Data Wrangling: The filter operator and condition information were wiped out when changing the column selection even if the column data type was the same.
  • Data Wrangling: Aggregate functions (mean, median, min, and max) for Date operations were not fully available on the Filter dialog.
  • Data Wrangling: Splitting a step did not show the resulting steps immediately and had to re-select a step to show them.
  • Data Wrangling: Text Data Wrangling: Now matched text gets highlighted in the Preview Table.
  • Data Wrangling: Rename column shouldn’t allow entering duplicated column name.
  • Data Wrangling: Gather dialog was not vertically scrollable when many columns were selected.
  • Data Wrangling: Brought back ‘Work with Text Function’ to Column menu.
  • Data Wrangling: Incorrect error message was shown for a data frame even if it didn’t have an error.
  • Data Wrangling: Corrected the Column menu and Step dialog titles to be consistent.
  • Data Wrangling: Moved ‘Ungroup’ menu to the top level of Step menu.
  • Data Wrangling: Text Data Wrangling: Supported to show full text in the popup when hovering a mouse over a column that contains long text.
  • Data Wrangling: Recode dialog shouldn’t show images when text contains img HTML tag.
  • Data Wrangling: Summarize dialog should reject duplicated column name when editing the column name.
  • Data Wrangling: Could not click OK button on Column Selection Dialog on a PC with lower screen resolution.
  • Summary: Group-By Columns were not highglihted with green color.
  • Summary: Show time and timezone information for POSIXct columns.
  • Summary: ‘Unique Values’ shouldn’t count NA as a unique value.
  • Summary: Text on the summary panels was selected if you chose multiple columns by Shift+Click action.
  • Summary: Show an actual number of NA/Non-NA values in popup when you hover over an NA/Non-NA ratio bar.
  • Chart: Pivot Table: More user-friendly message for an invalid Custom Function.
  • Chart: Pivot Table: It showed ‘V1’ for an empty string in Column Header if you assigned a column that had empty strings in values to Column.
  • Chart: Pivot Table: If you set a descending sort on a Row Header, (NA) showed up at the top.
  • Chart: Line chart failed to draw and showed an error dialog if you switched the chart type from Heatmap to Line.
  • Chart: Could not add a chart filter when a chart is pinned to a cached step.
  • Chart: Export Chart to CSV sometimes failed and showed an error dialog.
  • Chart: Supported moving ‘Edit Display Name’ dialog position by dragging it.
  • Chart: Contour chart showed an incorrect set of functions for Date column at Color.
  • Chart: Number failed to render and showed an error dialog if there were multiple columns with the same name.
  • Chart: Histogram: Y2 axis labels were missed once in a while in Histogram with ‘Cumulative Sum Ratio’ lines.
  • Chart: Boxplot: Pop-up showed a meaningless text ‘trace0’ if you assigned columns to X-Axis, Y-Axis and Repeat By.
  • Analytics: On Effects by Variable charts, now we show charts for variables up to the specified limit, regardless of the variable’s significance.
  • Analytics: Timeseries Forecast (Prophet) : Message “This chart is available only when there are more than 2 years/weeks of data” was shown even when the chart was actually available and shown.
  • Analytics: Timeseries Forecast (Prophet) : Sometimes removing existing External Variables in a duplicated Analytics did not work.
  • Analytics: Timeseries Forecast (Prophet) : Format of the output dataframe was broken.
  • Analytics: Timeseries Forecast (Prophet) : X-axis Date in Yearly Seasonality chart showed a specific year.
  • Analytics: Timeseries Forecast (Prophet) : Error with message “cols must select at least one column.” was raised when there was neither seasonality nor external variables.
  • Analytics: If you typed in “0.0” to a number text field, it was getting back to “0”, which was preventing you from typing in a value like “0.01”.
  • Analytics: When using Repeat-By, sometimes it error-ed out due to an issue with a specific group. It is now showing the warning messsage in the Summary table, rather than stopping the entire analysis.
  • Analytics: Random Forest: Error with message “object ‘variable’ not found” was raised for a classification when there is a category with only one row.
  • Analytics: Repeat-By toolbar showed up in ‘Effects by Variable’ analytics chart even if no Repeat-By column was set.
  • Note/Slide/Dashboard: Improved error handling when the History information was corrupted.
  • Parameter: “Assertion failed” error was raised at creating data source with parameters.
  • Parameter: After making changes to a parameter and moving out to edit another parameter, the confirmation dialog about the change getting discarded didn’t show up.

5.5

Released on 1/10/2020 Here is a v5.5 release announcement blog post for more details on some of the key new features.

New Features / Enhancements

  • Data Source: Google Analytics: Supported Custom Dimensions and Custom Metrics.
  • Data Wrangling: We have introduced 2 new UI for ‘Text Data Wrangling’ to support ‘extract’, ‘replace’, ‘remove’, and ‘convert’ operations.
  • Data Wrangling: You can now reorder the columns in Group-By and Values sections by drag-and-drop.
  • Chart: Histogram: Add ‘Cumulative Ratio’ and ‘Cumulative Sum’ reference lines.
  • Chart: Number: It now supports the Custom calculation.
  • Chart: It now supports the Nth & Quantile functions.
  • Chart: Pivot Table: It now supports ‘drag-and-drop’ to change the order of columns for Rows and Values.
  • Chart: It now captures the thumbnail images for Pivot Table and Table.
  • Analytics: Time Series Forecast (Prophet): It now shows Variable Importance based on coefficients of the Prophet model.
  • Analytics: You can select which components of Date/POSIXct data to be included as the predictors.
  • Analytics: Linear Regression: Variable Importance bar chart is now colored based on statistical significance of the variables.
  • Analytics: The text labels inside the chart pop-ups are now translated for Japanese UI.
  • Dashboard: Table/Pivot is now expanded to fill the space.
  • Dashboard: We have added Text Box for entering comment text and writing R script for custom visualizations.
  • Dashboard: It now captures the thumbnail image of the Dashboard output.

Bug Fixes

  • Table View: The long text in the pop-up were not shown fully.
  • Data Source: Google Sheet: Import Dialog: The long sheet names were not shown fully.
  • Data Source: Google Sheet: The default data frame names are sanitized automatically.
  • Data Source: Google Sheets: Changed default Data Frame Name from dataframe to GoogleSheet when the sheet name is non-ascii
  • Data Source: Google Analytics: Popup, which showed the dimension/measure detail information, was showing at wrong positions.
  • Data Source: Google Analytics: Dimension/Metrics names were not fully shown in the pop-up.
  • Data Source: Google Analytics: Clicking ‘x’ icon to clear Dimension/Metrics search words removed focus from the search input field and couldn’t start next search right away.
  • Data Source: Google Analytics: Goal 1 Metrics were not properly sorted in the Metrics List.
  • Data Source: Google Analytics: Couldn’t delete the Last N Days parameter value with the Delete Key.
  • Data Source: Google Analytics: Opening the Update Data Import Dialog was slow.
  • Data Source: Google Analytics: Clicking Show Only Selected Icon didn’t clear the search words automatically.
  • Data Wrangling: It now keeps the current scroll position of the Preview table when adding new columns in the Column Selection dialog.
  • Data Wrangling: Clicking the cached step caused the previous step being executed.
  • Data Wrangling: Multiclass classification evaluation menu is hidden when the window size is small.
  • Data Wrangling: ‘Use Row as Header’ now automatically handles duplicate names or NA values by default.
  • Data Wrangling: Filter: The filter operator and condition information was wiped out when changing the column.
  • Data Wrangling: Mutate: The syntax suggestion inside the Expression editor was not showing the proper values when updating the existing step.
  • Data Wrangling: You can rename the newly created column names inside the ‘Summarize’ dialog.
  • Data Wrangling: Summarize: The categorical columns are now assigned to Group By when opening the dialog from the column header menu.
  • Data Wrangling: The text labels for ‘Step Data Export’ menu is overflowing in Japanese UI.
  • Data Wrangling: You can move a Step UI dialog by dragging it.
  • Chart: Pivot Table threw an error if you selected “Ascending by Frequency” sort option against a row header column which was Numeric data type and categorized.
  • Chart: ‘Previous’ and ‘Next’ options were missing for the ’% of’ Window Calculation.
  • Chart: Couldn’t change the chart name to something that is already used in different data frames.
  • Chart: The data in Edit Display Name dialog and Highlight dialog didn’t reflect the “Other Group” setting.
  • Chart: Area Map failed to render and showed an error “Error in prettyNum invalid ‘nsmall’ argument” if you set a negative value at the decimal digit setting in the Chart Property dialog.
  • Chart: Line Chart: When you assigned text column whose data containing “1”, “2”, “3”, “4” to the X-Axis it showed only “1”, “2”, “3”.
  • Chart: The space between the X-Axis text labels and the chart were not stable after you zoomed in.
  • Chart: Table: It didn’t save the column order information when the column names consist of only numbers such as ‘2018’.
  • Chart: Pie: It threw an error “e.split is not a function” with a certain condition.
  • Chart: Limit Axis Value: The validation error message showed up at a wrong timing.
  • Analytics: K-Means clustering result was different on Mac and Windows.
  • Analytics: When you run the analytics, any invalid data wrangling steps are now automatically removed.
  • Analytics: K-means Clustering: The results were different between running it with the data wrangling step and running it inside the Analytics view.
  • Analytics: Time Series Forecast (Prophet): Couldn’t run it due to an alert from Mac OS X Catalina’s Gatekeeper.
  • Analytics: Market Basket Analysis: The Lift values shown on mouseover balloons on the scatter plot was wrongly labeled “Lift (Color)”, while Lift was actually expressed as Size of circles.
  • Analytics: K-means: “subscript out of bounds” error was raised when only one variable column was selected
  • Dashboard: Empty rows should be automatically removed in Dashboard Config UI.
  • Dashboard: Table showed an extra border line underneath the column header when you set a smaller font size.
  • Parameter: When the Parameter Dialog is opened from the Filter Dialog, the Filter Dialog was closed when it should have remained opened.

5.4.2.4

Released on 12/23/2019 This release is only for Public Version for below bug fixes.

Bug Fixes

  • Public: Closing a project failed with an error (Command failed: git push —force) when the last login inside the desktop app was not done properly.
  • Public: After restarting Exploratory Public, projects were not listed on the Project List.

5.4.2

Released on 12/12/2019

New Features

  • Introduced an “Offline Mode” with ‘Offline License Key’. (Detail)

Bug Fixes

  • Installation: On Mac OS X Catalina, automatic installation of R and/or Git failed.
  • Installation: On Mac, opening downloaded dmg file failed with error message “no mountable file system”.
  • Improved error handling and guidance when Exploratory cannot connect to the internet.
  • Opening project failed on machine with Avast antivirus software.
  • Data Source: Data Catalog: It failed to import data if Exploratory was initially started without internet connection.
  • Data Source: Google Analytics: Not able to switch View ID when there are multiple View IDs.
  • Data Wrangling: Summarize step default output column names now always have function name as suffix, to avoid confusion between original column and aggregated column.

5.4.1.4

Released on 12/1/2019

Bug Fixes

  • Data Source: If you clicked an “Import” button in Data Catalog Import dialog, it showed an error message.
  • Data Wrangling: Now NA is exported as an empty string instead of an “NA” string if you export data to CSV, Google Sheets or Clipboard from a data wrangling step, Chart or Analytics.
  • Data Wrangling: On Windows, the cursor position didn’t match with the text in the Calculation Editor of the Mutate dialog.

5.4.1

Released on 11/28/2019

Enhancements

  • Data Source: Google Analytics: Supported additional “Period” parameter options such as “Yesterday” for Google Analytics Data Import
  • Data Source: On Data Connection Setup Dialog, now unnecessary trailing white space for input fields are automatically removed except for password
  • Data Source: Now you can import data that is privately shared with you at the Data Catalog.
  • Chart: Support hiding the reference line information shown inside the chart legend.
  • Chart: Table: Support Date/Time formatting for Date/POSIXct columns inside the Table.
  • Chart: Error Bar: Support more aggregation functions in addition to “Count” and “Unique Count” for Y-Axis in Error Bar when the calculation type is “Ratio (%)”.
  • Chart: Contour: Support the ‘Repeat By’ for Contour chart.
  • Chart: You can set the output width and height for Wordcloud, which will make sure that the Wordcloud output will have exactly the same output regardless of where it was generated. (e.g. Chart view, Note, Slide and Dashboard.)
  • Chart/Analytics/Wrangling: Added a “Week of Quarter” function for Date/POSIXcit columns. This is available through Column Header Menu, Chart and Analytics.

Bug Fixes

  • Data Source: Google Analytics: “Account”, “Property”, and “View” list of values were empty when reopening the Google Analytics Data Import Dialog.
  • Data Source: Google Analytics: Now we don’t move the selected Dimensions and Metrics to the top.
  • Data Wrangling: The parse_number function didn’t work for the factor type columns.
  • Data Wrangling: Unfinished step in a Branch data frame showed up in the parent data frame.
  • Data Wrangling: On Windows, filter operators such as “Starts With”, “Ends With”, “Contains” did not work if the column contains non-ascii data.
  • Chart: When you used a Conditional Coloring for the Table, the opacity was set unintentionally.
  • Chart/Analytics/Wrangling: On the Column Selection Dialog, clicking the “Clear All” link did not remove the selected columns.
  • Chart/Analytics/Wrangling: The background color of the Column Selection Dialog was too dark when the column configuration dialog was opened.
  • Analytics: The comment entered without being explicitly saved for the Analytics was cleared after closing the dialog.
  • Note: If you click a URL link in a Note in the Side-by-Side view mode, it opened 2 web browser tabs.
  • Note: Publishing a Note that was duplicated from another Note overwrote the original one at the Exploratory Cloud (exploratory.io).

5.4.0.12

Released on 11/16/2019

Enhancements

  • Chart: Updated Table under Chart view by supporting Conditional Formatting, Function, Column Rename, and Column Reorder functionalities.
  • Chart: Now you can edit the values of the columns assigned to Color with ‘Edit Display Name’ menu.
  • Chart: You can now manually set which values to keep or remove when creating ‘Other’ group under Chart view.
  • Chart: Error Bar chart supports various ‘Directions’ for calculating the ratio.
  • Chart: Support ‘Number of TRUE/FALSE’ functions for the logical columns assigned to Y-Axis of Error Bar.
  • Chart: When you move the mouse over on the error bar it should show the actual values of the range along with the length of the range.
  • Chart: Show a dropdown to select the range type (SD, 95% Confidence Interval, etc) dropdown below the Y Axis for Error Bar.
  • Data Wrangling: You can now set the seed within the Sample step UI.
  • Analytics: We have added a Collinearity tab for Linear Regression, Logistic Regression, and GLM, which will help you diagnosis the multicollinearity.
  • Analytics: We have added a Effect tab for Linear Regression, Logistic Regression, GLM, and Decision Tree, which is basically the same as the one for Random Forest and helps you understand how the change in the predictor variables would effect the target variable.
  • Analytics: ANOVA/T-Test: Added weekend function option to categorize Date data.
  • Analytics: Coefficients plot for regression analysis now has base level for categorical variable in mouse-over popup.
  • Analytics: Support “Week of Month” function for the date/time columns assigned to Repeat By and Color By.
  • Analytics: Regression Analysis/T-Test/ANOVA: Now you can apply functions like normalization or log to the input data as part of the data pre-processing.
  • Analytics: Regression Analysis/T-Test/ANOVA: Now you can filter outliers as part of the data pre-processing.
  • Analytics: Random Forest, Decision Tree: The actual data is displayed as a gray line along with the blue line representing the predicted values under Effects by Variable tab.
  • Public: Added R Script and Cloud App data sources for the Public edition.

Bug Fixes

  • Data Source: Google BigQuery failed to import data via Google Cloud Storage.
  • Data Source: Google Analytics: Re-designed the data import dialog to improve the usability.
  • Summary: the bars for NA were always showing 0 for the logical data type columns.
  • Chart: Number should be able to show 0 instead of NA.
  • Chart: ‘Show Detail’ button failed to show data when a numeric column at X-axis is setup with int10 function.
  • Chart: ‘Show Values on Plot’ is not working correctly when X-Axis is categorized on grouped bar chart.
  • Chart: the Chart Control area was not showing up after moving between Table View and Chart View.
  • Chart: Reference line was not shown when you used the ‘Limit’ feature (e.g. Top 10) with Bar chart.
  • Chart: Reference Line was not shown when you used the ‘Categorize’ feature at X-Axis of Bar chart.
  • Chart: Comment Dialog should keep the text entry during the same session even when you didn’t save it and closed the dialog.
  • Chart:A broken chart thumbnail was displayed when you duplicated an existing chart and entered the comment.
  • Chart: Selected values for “is in” operator inside the Filter dialog were lost when you navigated to another chart and came back.
  • Chart: Text was chopped in the middle in Number.
  • Chart: ‘Show Detail’ didn’t show any data of the lowest edge bar of the histogram chart.
  • Data Wrangling: “equal to” option was not available for the logical data type columns inside the Filter menu.
  • Data Wrangling: When converting POSIXct column to Date Column, timezone information was lost.
  • Data Wrangling: ‘Go back to project list’ button should not be clickable when there is another R process running.
  • Analytics: When you changed the font size for the biplot chart under PCA the color setting was lost.
  • Analytics: You couldn’t read the whole message when it was too long.
  • Analytics: Time Series Forecasting: Default value of test period was not set correctly.
  • Parameter: Using parameter in custom function for Summarize step did not work.
  • Installation: When you create a directory under C:\Users\ and use it for Custom Repository, Exploratory didn’t start up and show an empty screen.
  • Installation: The required R packages were not installed when switching the repository.
  • General: When you clicked an URL link inside the chat window it opened an Exploratory Window instead of a web browser.
  • Public: ‘Quote exceed’ message was shown incorrectly when there is a problem in the network connection.

5.4.0

Released on 10/23/2019 Unlike other major version upgrades (e.g. 5.2.0, 5.3.0, etc.), this release (5.4.0) is a ‘merge’ release that brings all the recent enhancements that we have made for 5.3.4 patch set. Also, we have made the below listed enhancements and bug fixes. We’re going to release an ‘official’ v5.4, which is going to be as 5.4.1, in early November, and add new features and enhancements we’re currently working on.

Enhancements

  • Data Wrangling: Added an option for ignoring NA when uniting columns.
  • Chart: You can use the columns as part of the URL link even when they are not selected for the table.
  • Note: It now shows the TOC expanded by default. You can change this setting in the property.
  • Note: Changed the font style for Note and Chart.
  • It now always ignores .Rprofile file so that it can start with more stability.
  • We have upgraded the system R packages.
Beta Features: These are not official features, but we have exposed them as beta features. We’ll support these as official features in the next release (5.4.1).
  • Beta: Analytics: We have added a Collinearity tab for Linear Regression, Logistic Regression, and GLM, which will help you diagnosis the multicollinearity.
  • Beta: Analytics: We have added a Effect tab for Linear Regression, Logistic Regression, GLM, and Decision Tree, which is basically the same as the one for Random Forest and helps you understand how the change in the predictor variables would effect the target variable.

Bug Fixes

  • Data Wrangling: ‘Convert from Hexadecimal to Numeric’ menu was missing for the the column header menu.
  • Data Wrangling: Custom Filter condition needed to be surrounded by parenthesis.
  • Chart: After duplicating a chart and renaming the chart name, thumbnail was corrupted on the chart tab.
  • Chart: ‘Number’ was returning a number value even when a Date/POSIXct column is assigned.
  • Chart: Pin was removed after Note is refreshed.
  • Analytics: Improved support for multibyte column names, especially with Time Series Forecasting and Logistic Regression.
  • Analytics: Time Series Forecasting: When the change point dates are not double-quoted, it errored out.
  • Note: It overflows on iPhone when it contains the code blocks.
  • Note: When you copy image into Note, it was showing a wrong project folder path.
  • Note: Even after removing all the text from the editor the Preview was still showing the same result.
Public Version Only:
  • Could not setup Web Proxy when Public Version was not able to connect to the Internet.
  • There was an error about git when the password includes the special characters like ’@’.
  • Project git clone dialog should validate the project URL.

5.3.4

Released on 10/8/2019

Enhancements

  • Data Source: Added ‘Data Catalog’ from where users can download published data on Exploratory Cloud Server

Bug Fixes

  • Data Source: MySQL: On Windows, Japanese characters used in the column names and data were garbled.
  • Data Wrangling: Mutate All dialog had a wrong function name for “log1p”.
  • Data Wrangling: On Summarize dialog, it shows ”? ordered” as dat type on preview table when choosing weekdays() as an aggregation function for Date Column
  • Data Wrangling: It now shows the ‘last imported’ date/time at the data source step.
  • Chart: Added ‘Apply’ button for the number of bucket control in Histogram.
  • Chart: when you delete a parameter that is assign to a chart, the chart hangs when viewed
  • Analytics: Time Series Forecasting: Supported Japan as Country for Holidays
  • Analytics: Time Series Forecasting: Prophet: Multiple countries for holidays were not honored
  • Publish: The description/title/tags for shared contents (e.g. Note, Dashboard, Chart, Data) can be editted at the server.
  • Publish: Keep original url when stop publishing and republishing contents (e.g. Note, Slide, Dashboard, Chart, Data, etc.)
  • Installation: On Windows, an installed R is not detected if it is installed with non-privileged user who has not activated OneDrive.

5.3.3

Released on 9/23/2019

Bug Fixes

  • Data Source: Web Scraping: The Run button became disabled once it was clicked.
  • Data Wrangling: On Expression Editor, stop auto suggest when new line feed is entered.
  • Data Wrangling: Filter: Supported aggregated function for Date and POSIXct data type columns.
  • Data Wrangling: When you clicked ‘Create New’ in an existing Mutate step, the column name and the expression were copied from the one above.
  • Data Wrangling: Column names were not suggested for some commands when the Mutate Dialog was opened from column header menu.
  • Data Wrangling: Could not type in ”[ ]” on Custom Function Editor of Summarize Dialog.
  • Data Wrangling: Error messages were showing the step id instead of the step name.
  • Data Wrangling: Google Sheets Export: Existing sheets names were not listed.
  • Chart: Show detail didn’t show any rows for “(NA)” color in Bar chart.
  • Chart: Show appropriate date functions at Contour X/Y.
  • Chart: Pie chart failed to render and showed an error with “e.split is not a function”.
  • Chart: Last visited Tab was not remembered when creating a new Analytics.
  • Chart: Highlight dialog showed empty/incorrect values in column value dropdown.
  • Chart: Shows details Dialog did not show data when category (binning) is applied to a color column.
  • Chart: Histogram X-Axis bucket range was incorrect if you applied the log function to X-Axis.
  • Chart: Deleting a data frame that is used by a chart after modifying the chart threw an “TypeError: Cannot read property ‘getName’ of undefined” error
  • Chart: Sample size became 5000 (default) if you set the sample size more than the number of rows in Scatter chart.
  • Analytics: Linear Regression/Logistic Regression/GLM: In Summary Tables, “Deviance” was relabeled to “Residual Deviance”
  • Analytics: PCA, K-Means: Sampling was not done by default as part of preprocessing.
  • Analytics: ‘Other’ group information was showed even there were only 2 unique values after an analytics level filter was applied.
  • Analytics: PCA: The numbers in X/Y titles were not updated accordingly.
  • Analytics: Failed to render Survival Curve with Cohort and showed an error “Invalid argument was passed to returnsNumericValue”.
  • Note/Slide/Dashboard: Switching the view mode from ‘Side-by-Side’ to ‘Single’ should be disabled while preview process is still running.
  • Parameter: Could not save Number Text field parameter because of an incorrect data type validation.

5.3.2.6

Released on 9/4/2019

Bug Fixes

  • Chart: Support an option to show/hide unused factor levels in Pivot Table.
  • Chart: Sample size became the default size (5,000) if you set a sample size more than the number of rows in Scatter chart.
  • Chart: Histogram failed to render and showed the error “Cannot read property ‘name’ of null”.
  • Chart: Category setting dialog didn’t open by clicking the green text in Boxplot.
  • Analytics: Failed to render Survival curve chart with Repeat By and without Cohort, and showed an error “Invalid argument was passed to returnsNumericValue”.

5.3.2

Released on 9/3/2019

Enhancements

  • Installation: Added “Reset” Button to reset the System R packages to originally installed versions (a.k.a. factory setting).
  • Performance: Improve the performance for opening Note/Slides/Dashboard editor.
  • Performance: Improved SQL Query performance in general.
  • Chart: Support ‘Auto-Binning’ for numeric columns when they are assigned to Color with functions such as LOG/ABS/INT10.
  • Chart: Support the Trend Line even when categorical columns are assigend to X Axis.
  • Chart: Support “Show Details” even when the X-Axis Columns are categorized.
  • Chart: Support for creating Custom functions inside Pivot Table.
  • Chart: Support Auto-Binning of X Axis for Line and Area charts.
  • Chart: Support Auto-Binning for Repeat By and Group By in Chart.
  • Chart: Support Auto-Binning for Coloumn/Row Headers of Pivot Table.
  • Chart: Support Vertical Reference Line for Line chart. Chart/Analytics: Now “Save Chart/Analytics data as Data Frame” will add the data frame name as part of the name.
  • Chart: Support ‘Limit Values’ for Y Axis in Bubble chart.
  • Chart: Support ‘Export as Data Frame’ option.
  • Chart: The “Show Details” dialog now shows ‘Number of Rows’ information and use the same filter conditions as shown in Chart Hover Popup.
  • Chart: It now dynamically change the scale of the colors depends on the unique values. Currently, we support only up to 10.
  • Data Wrangling: Extended the Case Insensitive text matching for character related filter operations such as ‘Start with…’
  • Data Wrangling: It now shows the comment icon in an always visible way when there is a comment at any data wrangling step.
  • Analytics: Support for multibyte/special characters in column names.
  • Analytics: Now it shows the number of rows for each Repeat-By group under Summary tabs.
  • Analytics: For binary classification models under Analytics Views, we have added a “Probability” tab to show a histogram of the probability.
  • Analytics: Support ‘Reserve Order in Data’ method for splitting Training/Testing data under Analytics view.
  • Analytics: Bayesian A/B Test: Added option to flip A and B
  • Analytics: Time Series Forecasting: Support the External Predictors even when the Target Value is Number of Rows.
  • Analytics: Time Series Forecasting: Support for External Predictors created from same column but with different aggregate functions.
  • Analytics: Random Forest: Effect by Variable tab now shows only the significant variables based on Boruta’s result.
  • Analytics: Decision Tree: Added more properties for finer control of branching in decision tree.
  • Dashboard/Note/Slides: It now always opens Dashboard/Note/Slides in a separate window.
  • Parameter: Supported Tab key for move between input fields for the manual input values option.

Bug Fixes

  • Installation: On Windows, “No admin privilege” error was shown when user actually had admin privilege.
  • Installation: Already installed Git was not detected.
  • Project: Opening a project after creating a parameter with name that includes ”-” shows “Error 127” and could not open the project.
  • Project: When Importing a project with offline mode, it showed an error that says unable to connect exploratory.io and could not import it.
  • Generic: Clicking an URL link inside the Chat window opened a blank page.
  • Generic: Error “parseJsonSafe raises Unexpected token \ in JSON” was raised when data had SJIS’s problematic characters. (So called “damemoji”)
  • R Package: Success message was not displayed on Manage R Package Dialog after R Package installation
  • R Package: Custom R package installed in a project was not automatically checked as used in the project 
  • Data Source: a proper default encoding was not assigned for CSV file data import.
  • Data Source: SQL Data Source: Comments inside SQL query caused invalid syntax error
  • Summary View: When hovering a mouse over Column Name on Summary View, it broke word in the middle if the column name was long.
  • Summary View: Histogram chart in the Summary View panel was gone after clicking the chart icon to create a new chart and came back to the Summary View.
  • Chart: Drag and Drop the Chart Pin button sometimes didn’t highlight the target step while it’s moving.
  • Chart: Decision Tree picture size was too small when it’s embedded inside Note.
  • Chart: A previous Chart tab selection was not preserved when moving between Summary and Chart views.
  • Chart: Scatter chart failed to render if you set a numeric column at Color and enabled the circle option.
  • Chart: On Windows, vertical scrollbar overlaps with the chart legend of the Line chart.
  • Chart: Pivot sort by clicking the column header didn’t work properly if there were empty rows.
  • Chart: Heatmap was not showing NA at X/Y Axis.
  • Chart: It no longer shows the warning dialog when you assign a column with too many unique values to Color.
  • Chart: Renaming an inactive Chart name didn’t reflect the change immediately.
  • Chart: “Show Details” dialog didn’t show the data for “Others” or “NA” group.
  • Chart: The sample data size number was not reflecting the data size after the Chart level filter being applied.
  • Chart: Sorting of Bar chart with % of Total Window Calculation was not correct.
  • Chart: LongLat Map showed unexpected lines if you assigned a column to Label with the “Connect Data Points by Lines” option enabled.
  • Chart: Pivot Table didn’t show factor levels that didn’t have any values.
  • Chart: NA values in row/column header should show something like “(NA)” instead of being empty in Pivot Table
  • Chart: Trend Line property dialog now shows a reason why Loess trend line type is sometimes disabled.
  • Chart: Support ‘Other Group’ for Group By of Bubble and LongLat Map charts.
  • Chart: Renaming a Chart Tab Name didn’t update the Number’s caption immediately
  • Chart: Character and Logical columns in Bubble chart should show the column functions.
  • Chart: It should show ’%’ in the balloon and legend if ”% of TRUE” is assigned to Color.
  • Chart: Charts created by “Create a chart” from the Summary view shouldn’t have an index number in the chart name unless the name conflicts.
  • Chart: ‘Limit Values’ was not effective if ”% of Total” Window Calculation was applied.
  • Chart: Highlight showed only 1 value in the LOV in Area Map.
  • Chart: Pivot Table failed to render if a column with double quotes was assigned to Value.
  • Chart: Exclude/Keep Only generated an invalid chart filter on a Pie/Ring chart without Color By/Repeat By.
  • Chart: Chart Level Filter should not be created if the filter syntax entered in expression editor was invalid.
  • Chart: Pie/Ring chart didn’t show the pop-over by clicking a slice.
  • Chart: Numeric value on X-Axis with Discrete option didn’t sort even the sorting option was set in Bubble Chart.
  • Chart: “Show Details” Dialog ignored Chart Filter condition for Histogram.
  • Chart: Failed to show the Show Detail dialog and opened an error dialog with “error code 3” on Scatter chart.
  • Data Wrangling: Unnecessary column suggestions were shown when the Mutate Dialog was opened from the column header menu.
  • Data Wrangling: When a step failed to execute, an error message incorrectly mentioned that the error is from the currently selected step even if the error is coming from other step.
  • Data Wrangling: Adding or updating a Mutate Step sometimes did not update the result on the Table View
  • Data Wrangling: Selecting a column value from the suggestion was adding extra double quotes in Mutate Expression editor.
  • Data Wrangling: Summarize: Newly created column should have aggregation suffix as part of the name only when there are multiple entries with the same column with various aggregation functions.
  • Data Wrangling: Column names were not suggested inside ifelse function.
  • Data Wrangling: unnecessary column suggestion happened on a Mutate Dialog for excel time to date conversion.
  • Data Wrangling: When an invalid token exists in the middle of Mutate Step tokens, it should be automatically removed.
  • Data Wrangling: When a data frame is grouped by group_by function in the Custom R Script Data Source, the grouping status was not shown in the UI.
  • Data Wrangling: End Date could not be entered for between filter with POSIXct Date columns in Japanese UI.
  • Data Wrangling: Moving Branch root should change Chart/Analytics Pin Point if the Chart/Analytics points to the branch root.
  • Data Wrangling: %in% operator was not suggested in Mutate command dialog.
  • Data Wrangling: The last digit of 64 bit integer is displayed with wrong value in Table View.
  • Analytics: Deleting an analytics level filter showed an error - Cannot read property ‘getAnalysisType’ of undefined.
  • Analytics: Data tab in Time Series Forecast Analytics showed an error with Japanese column name on Windows.
  • Analytics: Should not show ‘Sample Size is set to 50,000’ message when the data is less than 50,000 in Analytics view.
  • Analytics: When exporting Random Forest prediction result from Analytics View, Logical columns were turned into Factor. It should be Logical.
  • Analytics: Poisson Regression / Negative Binomial Regression: Stopped using Incident Rate Ratio as metric of coefficients when link function is not log.
  • Analytics: Anomaly Detection: Error “object ‘negative_anomalies’ not found” showed up when Direction of Anomaly is set to Positive
  • Analytics: Now it shows both training data is and test data for the prediction matrix when Test Mode is enabled.
  • Analytics: Message text for Other Group disappeared after changing the Analytics configuration.
  • Analytics: On Build Random Forest Dialog, logical column should not be selectable for numeric regression.
  • Analytics: Hitting enter key didn’t refresh a chart at the input field in the Analytics Chart Property dialog.
  • Dashboard/Note/Slides: When a note is opened, the related Data Frames were not highlighted in the data frame list (at the left hand side).
  • Dashboard: Dashboard failed when there are double quotes in the Dashboard name.
  • Dashboard/Note/Slide: Publishing raised error “Local NTFS volumes are required to complete the operation.” when the repository is on a remote file system such as Google Drive File Stream.
  • Parameter: When updating a parameter value, “Select Values” text was shown over the values in the dropdown.
  • Parameter: Could not create a new parameter on a Note opened with a separate window
  • Parameter: Could not edit a parameter that references a deleted data frame or step.
  • Parameter: Data type validation on Numeric parameter was missing at parameter creation.
  • Parameter: Input field of Slider Parameter didn’t work.

5.3.1

Released on 8/11/2019

Bug Fixes

  • Failed to import data from BigQuery. - There was an issue that some of our users had a problem for importing data from Google BigQuery due to the underlying Google BigQuery API change. We have updated all the related places to use the officially supported APIs.

5.3

Released on 8/7/2019

New Features

Here is the v5.3 release announcement blog post where you can find the details for all the new features.

Enhancements

  • Data Source: CSV: Supported “None” for Quote Parameter
  • Data Wrangling: Supported ‘Branch’ icon at the step header
  • Chart: Histogram: You can enter any numbers for the Number of bars parameter.
  • Chart: “Line + Cirlce” marker type support on Bar/Line/Scatter
  • Chart: Supported up to 30 Values in Pivot Table
  • Chart: Color: Support Reversing the Order of the Legend Values
  • Analytics: Time Series Forecasting: Now you can configure the Change Point Range.
  • Analytics: Chi-Square: Repeat-by support has been added.

Bug Fixes

  • Generic: ‘Hide Sidebar’ icon didn’t show up after hiding it and re-opening a project
  • Generic: It now use the current OS locale for the R connection if locale is not defined in case of Mac.
  • Generic: Another R Process running error shows Re-Run button so that users can clear the process without restarting the R session.
  • Installation: It threw an error complaining about existing Rserve process when switching the repository location.
  • Installation: When you did not have admin privilege, installed Git/R was not recognized by Exploratory
  • Project: Create Project failed with git init due to missing email and username
  • Data Source: MailChimp: Date parameter did not work and gave Unsupported value type for form field ‘since’ error Customer
  • Data Source: Redshift: Integer64 columns are forced to be converetd as Numeric columns since Integer64 is not fully supported yet.
  • Data Source: Google BigQuery: Adding comments inside SQL editor caused an error.
  • Data Source: Google BigQuery: Opening Data Import Dialog from Source Step ended up with empty Table List under schema section on the Import Dialog.
  • Data Source: CSV: Support a mode for importing the data as character data type.
  • Data Source: MailChimp: Date parameter was not working properly.
  • Data Source: GoogleBigQuery: Support UTF8 data properly.
  • Data Source: Could not open an SPSS file.
  • Data Source: PostgreSQL: Upgraded the underlying R package for better quality.
  • Data Source: SQL: Optimize for data re-fetching logic when importing the data into a data frame.
  • Data Wrangling: Shortcuts Hint button now show “Control+Enter” for Windows.
  • Data Wrangling: Filter: Is Not Alphabet condition did not work
  • Data Wrangling: The calculation text was copied from the existing one even when creating a new calculation in the same Mutate step.
  • Data Wrangling: Recode: ’Equal Frequency Option’ now shows the numeric ranges as the category names.
  • Data Wrangling: Build Random Forest step has switched to use Ranger for better performance.
  • Data Wrangling: is_alphabet function to support non-ascii characters properly.
  • Chart: Heatmap: Now Y axis direction starts from the bottom to the top.
  • Chart: After creating a chart from Summary View by clicking Quick Chart Icon, the column search box remained.
  • Chart: Property dialog overflowed if the screen size is small on Windows
  • Chart: Pie chart failed to render if you switch the chart type from Bubble
  • Chart: Enter key did not refresh the chart when a value was changed in Chart Property Dialog
  • Chart: Show Details should show a user friendly filter condition information.
  • Chart: Multiple LOV dropdowns opened at a time in the chart property dialog.
  • Chart: Reference line was not showing when the bar chart in the horizontal mode.
  • Chart: Area Map failed to render when I changed the data type from number to logical.
  • Chart: When drag and drop a Chart Pin, unwanted pin image was shown at the left hand side top.
  • Chart: The dropdown list for Highlight was empty when a numeric column was assigned to Color and the data function was changed to Text/Int/Int10.
  • Chart: The mouse over pop-up always showed the 1st measure information even when there are multiple measures.
  • Chart: Pivot: Support Post Calculation for the Grand Total
  • Chart: The order of the Repeat By was corrupted if you assigned a numeric column that contained positive and negative values.
  • Chart: Comment: In the Comment Dialog, Enter key didn’t work.
  • Chart: The DAY aggregation function was reset to YEAR when you switch columns.
  • Chart: Violin Plot: Sorting is now supported.
  • Chart: Column value dropdown was sometimes empty inside Highlight dialog.
  • Chart: “Number” chart thumbnail didn’t get updated when it was duplicated.
  • Chart: Word Cloud thumbnail didn’t get updated when moving between Table view and Chart View.
  • Chart: Number chart failed to render when the chart type was changed to Number from Pivot
  • Chart: Pivot: Grand Total was not reflecting the current sorting order.
  • Analytics: Prophet: Error ‘argument “n.changepoints” matched by multiple actual arguments’ was raised when number of changepoints was specified
  • Analytics: Decision Tree: Multiclass Tree was displayed without color
  • Analytics: Decision Tree did’t use the full available space for the first time rendering
  • Analytics: PCA: NA was showing up when there was no NA
  • Analytics: On the Delete Confirmation Dialog, Hitting Enter Key did not work.
  • Analytics: Prophet: Support Logical data type columsn for Holiday variable.
  • Analytics: K-Means Clustering: It was producing a wrong result.
  • Parameter: On Dashboard, a default value was not populated on single LOV
  • Note: The Markdown table text now uses bigger font size.
  • Note: Set “dpi=300” in the default R code block template to avoid blurred graphical output from R.
  • Dashboard/Note/Slide: It should not show Parameter button when not necessary

5.2.1

Released on 6/3/2019 This release is to certify R 3.6. The installation of v5.2.1 will automatically install R 3.6, and this will make all the R packages you have installed in the past invalid and you will be asked to re-install them so that they will be compatible with R 3.6.

Bug Fixes

  • Windows: Creating the repository on a drive other than C: drive failed.
  • The trend line option was not available for Bubble chart when a date column is assigned to X-Axis.
  • Summary View was not displayed if a data frame had a column whose name was “msg”.
  • Could not open the CSV Import Dialog for a data source created prior to version 5.2.0.
  • For PostgreSQL Data Source, now it automatically adds double quotes for the table name part of the SQL query when clicking on the table name.
  • When adding a new parameter, a validation message was not shown when you entered duplicated parameter name
  • On the Step Menu, ‘Convert to Custom R Command’ was not working.
  • TOC was missing in the exported html if you exported a Note in side-by-side mode.
  • Wordcloud was not rendered when you assigned a column whose values are all NAs or all 0.
  • Timeseries Forcasting Analytics showed dotted line for Yearly Trend.
  • Chart level Filter was not working for Wordcloud chart.
  • Chart failed after canceling the long-running process by clicking the cancel button.

5.2

Released on 5/17/2019

Enhancements

  • Chart Highlight Support
  • Support Sorting for Boxplot and Bubble chart.
  • Adding a Comment feature for Chart and Analytics.
  • Support reverse color order when a categorical column is assigned to the Color of Chart
  • Support more than 100 buckets for Histogram
  • Treasure Data Support

Bug Fixes

  • Exploratory hanged at start up with splash screen on Windows on some machines.
  • On Separate Dialog, the separator character was not updated and always changed back to Comma for Date columns
  • Trend line didn’t show if you set numeric column at color and chose “Data Range for Each Group”
  • Database import failed with error code 3 when database password includes quote characters.
  • Unsync X axis option for Repeat By feature didn’t work in Line chart.
  • When updating Proxy Configuration on System Configuration Dialog, the Re-login button did not respond if authentication for the proxy server fails
  • Trendline support when Color is Numeric in Scatter/Bubble charts.
  • Chart legend didn’t show all values in Scatter if the sync x axis option was off.
  • Pie chart failed with “Error: error code 3” error if the column name contained backticks.
  • Error “C stack usage is too close to the limit” was raised when running ‘Correlation by Column’ Analytics originally created with Exploratory v4.x.
  • Error ‘All “x” values are identical’ was raised when running ‘Normality Test’ Analytics View with a column with a same value.
  • On Custom R Command Dialog, target columns for join command was not suggested when the target data frame name had special characters Support “Do not auto-detect the data type” option for CSV Import
  • Summarize step was not created when the Summarize Dialog was opened from a column header menu
  • On Filter dialog, Summarize function always went back to Mean where it should keep the previously selected function
  • When re-open a data frame, it didn’t open the previously opened chart when the chart was duplicated from other chart
  • With the column name search, selecting a column by Enter key did not set the selected Column
  • PCA Analytics didn’t show NA in the legend.
  • Boxplots got very skinny when Color and Repeat By are assigned.
  • Exporintg Note to Word format failed when it had a pivot table with only measures.
  • Missing Value Handling’s ‘None’ option didn’t work as expected in Line chart.
  • Adding a new chart did not add the new chart tab right after the the current chart tab.
  • Incorrect default value was set for Color Opacity on Area Chart.
  • The Correlation information was not shown inside the Trendline pop-up in Bubble chart.
  • Performance Improvement when navigating among Data Frames, Steps, Chart tabs, and Analytics tabs
  • Y-Axis values should be the last in the Chart pop-up.
  • Publishing a Note with reference to an already removed Chart/Analytics failed with error message “Cannot read property ‘dependencies’ of undefined”.

5.1.5

Released on 4/12/2019

Bug Fixes

  • General: Parameter Dialog did not show LOV for Step Selection for parameter values.
  • Data Source: Could not open Data Import Dialog for Databases.
  • Installation: Mac: Repository Selection Dialog was not displayed with Japanese even with Japanese MacOS.
  • Data Wrangling: When a Data Frame was selected, error was raised with message “TypeError: Cannot read property ‘getName’ of undefined”.
  • Chart: Scatter Plot: Trend line did not show up when Date column was assigned to color with function that returns number, such as Year, Quarter, Month, Day function.

5.1.4

Released on 4/10/2019

Bug Fixes

  • Wrangling: Summarize step with n_distinct function (Number of Unique Values) hanged.
  • Chart: Pivot UI disappeared when you remove the 2nd of 3 value columns.
  • Analytics: Correlation Analytics View: Axis and actual values were not matching in scatter matrix.

5.1.3

Released on 4/6/2019

Bug Fixes

  • Installation: Creating a new project failed with error message “cannot run gpg: No such file or directory”.
  • Wrangling: Labels on steps shown in the right-hand side wrangling step pane were missings for model summary/prediction related steps.
  • Wrangling: When selecting a data frame that has a build model step, an error with following message was raised. - “Cannot read property ‘getNRow’ of undefined”

5.1

Released on 4/2/2019 Check out all the new features in the following v5.1 introduction announcement blog posts! And here is a list of the other enhancements and bug fixes.

Enhancements

  • Installation: Support Exploratory Repository Location Switch from System Configuration UI
  • Chart: Support “Include Outlier” in Histogram/Scatter/Violin/Density charts.
  • Chart: Order support in Rank Window function.
  • Chart: Duplicating a Chart now place the copied chart right next to the original chart.
  • Chart: Pivot/Table to remember the last sort position and direction.
  • Chart: Show/hide row header option support in Pivot.
  • Chart: Categorical column support on X/Y Axis in Bubble chart.
  • Chart: Support categorical colors on Pivot text measure.
  • Chart: Property key value shouldn’t show if the 1st label is set as a title in Area Map.
  • Analytics: “Normalize Data” parameter is now supported in K-Means Clustering command dialog.
  • Analytics: Correlation Analytics View: Group By is supported.
  • Analytics: Correlation Analytics View: Scatter Matrix is added.
  • Analytics: Re-designed “Adjust Imbalanced Data” feature inside Analytics View and the command dialog.
  • Analytics: Chi-Square: Supported grouping functions for numeric variables
  • Analytics: T-Test: Properties such as “Paired” are supported.
  • Analytics: Support ‘Return’ key on Analytics Property Dialog to execute Analytics.
  • Wrangling: Single Select Column List now automatically selects the first item if a user types in to find a match
  • Wrangling: Introduce ‘Add a new step’ at the end of the right-hand side steps list
  • Wrangling: Mutate Dialog now shows a warning message when it detects non-ASCII numbers and special characters in an expression without quotes.
  • Wrangling: Support Aggregate Filter options on Filter Dialog
  • Wrangling: Support additional str functions (str_trunc, str_normalize, etc) for Column Header Menu
  • Wrangling: Slice command did not set n() as end argument by default.
  • Wrangling: Add column menu for Excel numeric date/time to POSIXct
  • Wrangling: Join command now supports ‘Case Insensitive’ mode.
  • Wrangling: Added Ascending and Descending Options to Rank Column Header Menu
  • Reports: When creating a Note, Data Frame was not searchable on Chart and Analytics Pickers.
  • Reports: Note: Improved the plain table style in Note.
  • Reports: Dashboard: You can set a Dashboard name when creating a new Dashboard with “Add to New Dashboard” menu inside Chart view.
  • Data Source: Support Account Switch for OAuth Data Sources (Google Sheet, Google Analytics, Google BigQuery, Stripe, MailChimp, Twitter Search)
  • Data Source: Enhance EDF import so that you can import a Report EDF from Data Frame Menu (and a Data Frame EDF from Report menu)
  • R Package: Support R Package Installation from inside a Project
  • Schedule: Data refresh on server is supported even when local file data sources, such as local CSV files, are joined.

Bug Fixes

  • Installation: when there is a .Rprofile sometimes it caused an error when opening the projects.
  • Installation: When upgrading Exploratory on Windows, ‘Switch Repository Location’ dialog was displayed even if the repository already existed.
  • Installation: OS locale was not automatically picked up on Windows.
  • Installation: An empty screen was shown after the fresh installation.
  • Installation: On Windows, sometimes Exploratory Desktop doesn’t start and stuck with the Starting-up Screen.
  • Summary: NA value shouldn’t ben shown as a bar Summary view.
  • Summary: Summary view failed when the data frame had only one column and that is POSIXct.
  • Chart: Histogram didn’t show all the factor levels in legend.
  • Chart: Legend showed weird items if you assigned a numeric column with NA to Color in Boxplot.
  • Chart: Property Menu showed up far from the chart property icon
  • Chart: Other Group info didn’t show up when you assigned a numeric column to Color.
  • Chart: Pivot sort icon was hidden if the text on the column header was long.
  • Chart: The bucket range was incorrect in Histogram when a column is assigned to Color.
  • Chart: Couldn’t rename the locally installed GeoJSON maps.
  • Chart: Clicking on ‘Show Details’ menu inside Chart showed a loading icon forever with Histogram.
  • Chart: Clicking on ‘Show Details’ menu inside Chart did not show data when POSIXct/Date columns are assgined to X-Axis.
  • Chart: ‘Show Detail’ doesn’t show the data with floating numbers in scatter.
  • Chart: Scatter chart with the range data din’t work properly with % (Percent) Number Formatting for Y-Axis.
  • Chart: Order of chart thumbnails displayed by mouse hovering on data frame didn’t reflect the order of the actual chart tabs.
  • Chart: % (Percent) number format should be done automatically if the % based aggregation function is used for Number.
  • Chart: Creating a new chart caused an error - “Cannot read property ‘top’ of undefined”.
  • Analytics: PCA biplot chart showed NA in the chart legend.
  • Analytics: In Property dialog, hitting the “Enter” key for IME(Input Method Editor) selection caused the Analytics to be executed.
  • Analytics: Heatmap color palette option didn’t work in Correlation analytics view.
  • Analytics: The order inside the chart legend in Survival Analysis was wrong when a logical column is assigned.
  • Analytics: Decision tree didn’t show Japanese characters correctly.
  • Analytics: Canceling Analytics View raised error “Cannot read property ‘evaluate’ of null”.
  • Analytics: Survival Curve: The green message text about Others group was not displayed when coming back from Table View
  • Analytics: Chart was sometimes not displayed even when it was generated before.
  • Analytics: Market Basket Analysis: Color was not utilized for indicating confidence of rules.
  • Analytics: Numbers in scientific notation was not shown correctly in Linear Regression.
  • Analytics: After the PC wakes up from the sleep mode, adding a new analytics caused an error.
  • Analytics: a chart from a different Analytics in a different data frame was displayed.
  • Analytics: Setting a random seed by default for Analytics View to be able to reproduce the same result.
  • Analytics: Exploratory process did not go away even after shutting down the app after using Time Series Forecasting.
  • Wrangling: In Create Bin dialog, Chart was not displayed when the previous step was disabled.
  • Wrangling: In Column Selection Dialog, selecting columns sometimes caused an incorrect column order.
  • Wrangling: Multi-Step Selection did not work when the Source step is also selected along with other steps.
  • Wrangling: ‘Clean Column Names’ did not handle non-ASCII characters well.
  • Wrangling: In Create Bin dialog, description text was cut off by chart bottom
  • Wrangling: In Custom R Command dialog, join target columns were not suggested when typing join command.
  • Wrangling: In Filter Dialog, the list of values did not show all the values from a given column.
  • Wrangling: In mutate step, another token was created after empty token
  • Wrangling: In Table View, ‘Rows to show’ dropdown didn’t work if there were less than 500 rows.
  • Wrangling: ‘Change Data Type to Character’ ended up converting the columns to Factor data type when selecting multiple columns.
  • Wrangling: Creating a new step didn’t work when Auto-Run mode is set to ‘Off’.
  • Wrangling: ‘New Token’ button inside Mutate step was sometimes disabled.
  • Wrangling: ‘Convert Excel Numeric to Date’ menu was not available when multiple columns are selected.
  • Reports: Clicking URL link opened another application window instead of opening an external browser in Note.
  • Reports: Position of an embedded chart with full width option was off in Note when TOC was enabled.
  • Reports: Restoring Dashboard from the history didn’t work.
  • Reports: Dashboard rendering failed and showed an error: “Error at running Dashboard - Error in file(con, “w”) : cannot open the connection”.
  • Reports: Dashboard: Unnecessary padding showed between rows when Numbers are inserted in Dashboard.
  • Data Source: Data import failed with data which contains date data type columns whose date range is too small.
  • Data Source: In Data Source dialog, after account is switched, viewID (for GA) and Sheet (for Google Sheets) didn’t get updated automatically.
  • Data Source: Dremio Data Source didn’t handle Data type correctly.
  • Data Source: Google BigQuery Data Source raised “Response Too Large To Return” error and could not import data.
  • Data Source: Enhance ODBC Database Connection to detect ODBC drivers and change to timeout in 30 sec for getting a connection.
  • R Script: Copied and pasted script on R Script Data Source didn’t work on Windows because of the wrong new line feed character handling

v5.0.3.0

Released on 2/14/2019

Bug Fixes

  • Google BigQuery Data Import fails with Response Too Large To Return.

v5.0.1.0 (Installer version, Windows Only)

Released on 2/13/2019 Repackaged 5.0.1.0 release with the Installer. You can double click the downloaded EXE file to start the installer. Once you finish the installation, you will have shortcuts on Desktop and Program Menu. You can also uninstall Exploratory from the Windows Control Panel. The product functionality is the same as 5.0.1.0 release.

v5.0.2.0 (Mac Only)

Released on 2/04/2019

Bug Fixes

  • Decision Tree and Market Basket Analysis don’t show Japanese characters correctly.

v5.0.1.0

Released on 1/02/2019

Bug Fixes

  • Google BigQuery Data Import Dialog does not show tables under schema tree.

v5.0.0.9 (Windows Only)

Released on 12/10/2018

Bug Fixes

  • Windows Defender SmartScreen raises Warning at the first startup.
  • Exploratory crashes at login.

v5.0

Released on 10/31/2018 Check out all the new features at the following v5.0 introduction announcement blog posts! And here is a list of the other enhancements and bug fixes.

Enhancements

General
  • Provided a way to access Proxy configuration UI while installation
Data Source
  • CSV Import: Shows more user friendly message when the encoding setting is invalid.
  • Custom R Script: Shows more helpful errors when there is an R error.
Data Wrangling
  • Merge UI now supports ‘union_all’ option.
  • Redesigned Mutate dialog to give more space to Expression Editor
  • ‘quantile’ is added under Summarize in Column Header menu
  • Mutate dialog should suggest locales for month() function
  • Introduce Full Name for ‘Day of Week’ and ‘Month’ functions
  • Changed the generated calculation to not include * 100’ for Ratio
  • Syntax help should suggest ”=="" as one of the operators in mutate()
Viz / Chart
  • Added Number formatting support on X-Axes in Chart.
  • Support line style when the marker is set Line via configuration dialog
  • Added ‘All’ for the direction options along with X-Axis and Color for the Window Calculation in Chart and Pivot.
  • You can set the default font size for each Pivot Table from the property.
  • You can set First or Last N Rows for Table
  • Trendline: Shows the Coefficient based on the date / time interval that is set to the chart X-axis.
  • Added ‘Opposite’ direction option for Cumulative Sum Ratio Window Calculation in Pivot Table.
  • You can set different Window Calculations to each value for Pivot Table.
  • Bar chart is sorted by default when you click on the instant chart icon at the Summary view.
  • Show “Create Other Group” info under Color and Repeat By control in Chart view.
  • Added “Hide Other Group” option for Color and Repeat By.
  • Added the second Label field in Map - Long/Lat. Fix for Chart: Day of Week Should Support ‘Full Name’
Analytics
  • Linear / Logistic / Cox Regression: You can select whether to order the variables based on the coefficients via property.
  • Chi-Square Test : You can select whether to show actual count or percentage in the pivot table via property.
  • Sample data size is now shown at the top when data is sampled
  • Support an EDF export and publish support
  • Anomaly Detection supports parameter setting via Properties now.

Bug Fixes

General
  • Renaming a Data Frame name by changing only upper/lower case removed the Data Frame itself.
  • Tool menu didn’t show up in Desktop.
Data Source
  • Remote File: Changing URL and click get data does not get a data from new URL
Data Wrangling
  • Table View: ‘Rows to Display’ option is automatically reset when there are less than the specified rows.
  • List data type columns were not refreshed in Table after a data wrangling operation.
  • Exported R script has duplicated setTokenInfo calls when there are multiple googlesheet data sources
  • “Generate R Script” did not work when Connection was available after importing the data frame.
  • Mutate Dialog: Should be able to turn off the column suggestion
Viz / Chart
  • Table: Exporting data for Table exported all the available columns at the step even when there were only a few columns selected for the Table.
  • Couldn’t enable trend lines when a Character data type column was assigned to Y axis with ‘Unique Count’ function.
  • Opening Show Detail Dialog when Bar Chart doesn’t have any column assigned to X-axis threw an error (error code 3).
  • Grouped Bar chart with multiple Y columns using Y2 axis with no X column assigned threw an error.
  • Bar chart with Circle Marker type failed with X, Y and Repeat by columns assigned.
  • Show Details Dialog errors when selected columns are all numeric columns
  • Hitting ‘Enter’ key event in the property should not refresh the chart. Hitting ‘Enter’ key is often used for finalizing a Japanese phrase.
  • It showed unnecessary data points when X-Axis was Month Name and Color By was assigned.
  • Got an empty screen after switching Display Language in Chart/Summary
  • Keeping the plus button in a fixed position even after you scroll chart/analytics tabs
  • Bar chart fails if you set Y2 axis at ‘sort by’ and remove the Y2 axis
  • It shows all the levels of a factor column in Chart legend.
  • “Show Detail” was ignoring the color condition if numeric column assigned to Color in Bar chart.
  • Custom Color Palette Menu is broken in Japanese UI
Analytics
  • The min and max ranges for Y1 and Y2 Axis were not matching for PCA Analytics.
Dashboard/Note/Slides
  • Section Title was not maintained when replacing the charts in Dashboard.
  • Note: When you created an empty note and moved between other notes, the empty note showed contents from other notes
  • Clicking a link in Table in a Note opened another application window.
  • Some of the charts in Note didn’t show up or showed up in an unexpected order.
  • Chart was broken in the Word export
  • Note: Refresh output before publish if note, side-by-side, TOC is on.

v4.4.0.5

Released on 8/13/2018

Bug Fix

General

  • Cancel button, which is shown during the data processing, is now formatted as a button instead of a link text to improve the visibility.
  • Couldn’t change the data frame names when changing between upper/lower cases.
  • ‘API - CSV Data’ menu is added so that you can import the published data at exploratory.io from other tools.

Data Wrangling

  • Step Menu: Moved “Create New Data Frame” to the action menu for each data wrangling step.
  • “Last N years” filter now returns data of the last year.
  • Column Header Menu: Convert to Number -> Minutes was producing a wrong attribute values.
  • In Mutate Multiple Columns (Mutate At) dialog, the columns could not be deleted when they no longer available after re-importing the data.

Chart / Pivot / Map

  • Added Percentage and Currency Formatting support for Charts/Pivot/Map. You can find this in the property dialog now.
  • ‘Show Details’ was not working when the numeric column is assigned to X-Axis.
  • Chart: Non existent month names were showing up when ‘Month Name’ was used for X-Axis and a column is assigned to Color By.
  • Month Name labels on X-Axis were not matching with what each bar represents.
  • Table Properties were not matching with the Table specific functionalities.
  • Chart was refreshed every time hitting the enter key event to finalize Japanese words in the property.
  • Grand totals for Row and Column are now showing up by default. You can turn them off in the property.
  • First chart should not be deleted or need to add new one right after deleting first one.

Analytics

  • Now you can export the charts as PNG.
  • Survival Table is now showing % symbol in the pivot table.

Reporting - Dashboard/Notes/Slides

  • The order of Charts was messed up after swapping the charts.
  • Some charts were not showing up in the output while showing the loading message forever.
  • Charts did’t show up right after importing Dashboard/Note/Slides EDF.
  • Disabled Enter key in Publish Dialog so that it won’t mistakenly publish it.
  • Note: R button in the toolbar is now populating ‘echo’ and ‘cache’ attributes by default.

Data Source

  • Data Source: Import JSON local file only imported first 200 rows

v4.4.0.4

Released on 7/31/2018

Bug Fix

  • Performance improvements for opening the projects.
  • Introducing a ‘memory efficient’ mode for importing Excel XLSX data type.
  • Couldn’t type and search Google Sheet names.
  • OAuth redirect for Twitter data connection was not working properly.
  • Remove an underscore ”(_)” letter at the beginning of the data frame names that were added after sanitizing non-ASCII characters from the data frame names.
  • Join Dialog: Target data frame list shows data frames from previously opened project when this step was invalid.
  • CSV download for the published data was not working when the data frame name was ending with “data”
  • Variable Importance under Analytics View error-ed when the predictor column names starting with full-width number.
  • Window Calculation (% Difference) with Multiple Column Headers Menu didn’t set the appropriate properties in the ‘Mutate At’ dialog.
  • Viz table failed to show when one of the columns was Interval data type.

v4.4.0.3

Released on 7/15/2018

Bug Fix

Data Wrangling

  • Couldn’t rename the data frame names to the ones that were used before.
  • We have moved ‘Copy As New Data Frame’ menu to under Export button. This used to be under the action menu of each step (right hand side).
  • Selecting Window Calculation menus from the column header men didn’t populate the correct parameters when multiple columns were selected.
  • In Custom Command Input mode, various internal data frame names were suggested when typing a part of the data frame names.
  • do_tokenize function was throwing an error when giving a column with space.
  • ‘Remove Empty Rows / Columns’ menu was missing from the Plus button menu.

Chart

  • Chart: Error Bar was showing an error out if only Y-Axis is assigned a column.

Analytics

  • Adding new Analytics tabs made the tab order broken, which caused some of the tabs not accessible.
  • Analytics level Filter area was too small regardless of the currently available area size.
  • Prophet: range of x-axis of Yearly Seasonality was too short when the time unit was hour
  • Weekly Seasonality was wrongly disabled with sub-daily time unit like hour was used.

Notes

  • Clicking on Refresh button was saving the changes when editing in the Separate Window with Side by Side mode.
  • Publishing Note is not generating the latest output after editing in the Separate Window with Side by Side mode.

Dashboard

  • Clicking ‘Open Viz’ button didn’t open the corresponding Viz.
  • Clicking on Re-import Data button broke the underlying data frames when the source data files were not accessible.
  • Wrong Dashboard names were showing up in the projects.
  • Dashboard Editor becomes disabled even after closing the Separate Window
  • Title text didn’t change when switching to another Dashboard.

v4.4.0.2

Released on 6/22/2018

Enhancements

Data Source

  • Support event related dimensions and measures for Google Analytics.

Chart

  • Support a property for the max number of rows in Pivot Table.

Bug Fix

Chart

  • Spin icon stayed forever after clicking show detail.
  • Tab disappeared after drag and drop.

Analytics View

  • Analytics Tab order switched unexpectedly.
  • Tab disappeared after drag and drop.

Data Source

  • Database Data Source Icons were disabled when offline.

Data Wrangling

  • Aggregate function list should align with that of Viz.
  • Clean Names created different cleaned column names from previous versions.
  • Could not create a Select step for Japanese column name on Windows.

v4.4.0.1

Released on 6/19/2018

Bug Fix

Dashboard/Notes/Slides

  • Document was broken after re-ordering chart/analytics Tabs on Viz/Analytics views.

v4.4.0.0

Released on 6/12/2018

Enhancements

Dashboard/Notes/Slides

  • Width/height ratio is kept when width is set to full.
  • Dashboard: Path shows more meaningful text rather than index id.
  • Dashboard: Single Value uses a display name for caption.
  • Support human readable object id.
  • Support Text wrap in the table.
  • Support Note EDF export and import.
  • Support opening Markdown Editor/Viewer in a new window.

Chart

  • Support Tab re-order by drag and drop.
  • Support auto margin.
  • Support option for chart export image size.
  • Show NA value in gray color on Number.
  • Support % format for Number.
  • Support columns selection in Table.
  • Support One Click Chart Creation from Summary View.
  • Support One Click Chart Insert to Dashboard.
  • Support “Other Group” for Repeat By.
  • Support “Other Group” for Color

Analytics View

  • Support Tab re-order by drag and drop.
  • AB test inputs fields are aligned with Chi-square test.
  • Chi-square Test pivot table shows values in percentage.
  • Add “Normalize Measures” option to Distance by Category.
  • Time Series Forecasting: Support sub-daily time units (hour, minute, and second).
  • Time Series Forecasting: Change points and their slope changes are displayed on Trend view.
  • Time Series Forecasting: Test Mode, where model performance is measured with test data, is added.

Data Source

  • Twitter Data Source shows more query results and include/exclude retweets parameter is added.
  • Support all 20 goals for Google Analytics.
  • Support executing Google BigQuery query without needing a data set and introduce “Standard SQL Mode” parameter in Import Dialog.
  • Support CSV data export encoding as a part of the user configuration.
  • Support Mongo js query evaluation in R.
  • Support scheduling chart/data/note with custom R script data source(s).

Data Wrangling

  • Support pagination in Table view.
  • Suggest windows specific locale values on syntax prediction on windows.
  • Support ”% of …” column menu.
  • Support separate/separate_rows by @.
  • Support an option to save resulting columns as factor columns on Create Bin Dialog.
  • Update clean_names and add remove_empty from the latest janitor package.
  • Support showing column/groups with color for Group-by step on Summary View and Table View.
  • Introduce a plus button on Table Header for Table View and a new column can be added to the summarize step by clicking the button.

Others

  • R 3.5 support.

Bug Fix

Reporting

  • Number: style was corrupted in a mobile view.
  • Right hand side preview content was not refreshed when opening a different note.
  • Republish note created a duplicate entry on the server side.
  • Note Editor was scrolled down when screenshot is pasted.
  • Opening Document on new Window took times.
  • Note Editor scroll position was reset after refreshing the preview

Chart

  • Move to another data frame and opening Viz under more showed wrong pin step.
  • Setting constant reference line on y2 axis with bar marker in line chart gave error.
  • Line Y axis range didn’t work if the y column is logical.
  • Z-axis missed the axis scale property.
  • Scatter repeated the same data if categorical on y axis.
  • Line chart didn’t render correctly with Month Name on x.
  • Cumulative sum was incorrectly shown in stack bar chart.
  • There was no way to know the column names when they are long.
  • Histogram: Need a better handling for Hours/Minutes/Days.
  • Number of TRUE was not the default function for Logical Data Type.
  • Table didn’t show true/false in uppercase.
  • TypeError: Cannot read property ‘isNumeric’ of null was raised.
  • fct_lump failed if numeric column with numeric data types specified.
  • Map Install took forever on windows.
  • Bar raised error if you switch it from Map - Area.
  • Histogram raised error because of the invalid validation.
  • Pivot raised error with multi measure and within group color by option
  • Repeat-by order was incorrect

Analytics View

  • Exported data from Analytics View did not match with what was displayed in some cases.
  • “Saving Thumbnail” message shows up where it shouldn’t.

Data Source

  • Updating Data Source executed redundant query.
  • Detailed error message was not displayed on connection dialog.
  • PostgreSQL: List data could not be imported

Data Wrangling

  • Sequence of backslashes was not handled well when parsing result safely from RServe.
  • Object validation was missing when you rename a data frame.
  • On K-means dialog non-numeric columns were not disabled
  • On Mutate Dialog, Function List position was incorrect.

Others

v 4.3.0.2 (Windows Only)

Released on 4/18/2018

Bug Fix

  • Installation of additional maps hanged.

v 4.3.0.1 (Windows Only)

Released on 4/8/2018

Bug Fix

  • Install failed if the path specified in EXPLORATORY_HOME environment variable had multibyte characters in it.

v 4.3

Released on 3/25/2018

Enhancements

Communication/Reporting

  • Dashboard Configuration by Drag and Drop

Chart

  • Correlation/Coefficient information is added in the trend line hover tooltip.
  • Scatter Plot / Bubble Chart : Now legend for color is shown when the column is numeric as well as when it is categorical.
  • Single Value: Supported custom message for no record case.
  • Supported Range (Confidence Interval, Standard Deviation, etc.) for Reference Line .
  • Added “Set 0 to Center” option to continuous color option.
  • Scatter Plot: Added date functions on X/Y Axis.
  • Added integer conversion functions (As Integer, As integer by 10) to the numeric functions in Charts.
  • Added First / Last options to Reference Line.
  • Supported line width in Trend Line.
  • Row ID column support in Long-Lat Map and Bubble chart.
  • Ratio type support in Error Bar chart.
  • Aggregate function name is now shown as part of column name in Pivot table.
  • Added a column sorting option to ignore/honor row groups in Pivot table
  • Pivot Table: Supported row total.
  • Added 2000 and 3000 rows options to viz table
  • Supported column search by name on Column Selectors.

Analytics View

  • Added Chi-Square Test Analytics View.
  • Added T-test Analytics View.
  • Added ANOVA Analytics View.
  • Added Normality Test Analytics View.
  • Added “Dinstance by Column” Analytics View.
  • Added Analytics property dialog for finer control on how each analytics is run.
  • Linear Regression : Y=0 reference line in Coefficients chart.
  • Distance : Exposed a property for color circle on/off to Similarity Map
  • Made P-Value thresholds adjustable.
  • Correlation/Distance : Exposed a property for whether to show full matrix or only the lower triangle.
  • Added “High Confidence” tab to Linear/Logistic/Cox Regression Analytics View.
  • Survival Analysis : Log Rank Test is added.
  • Supported Filters in Analytics View.
  • Time Series Forecast : Yearly/Weekly Seasonality Tabs are added.
  • Supported logical columns for Correlation/Distance by Column Analytics Views.
  • Now, random seed can be set in Variable Importance (Random Forest), Linear/Logistic Regression, Cox Regression Analytics View.
  • Supported column search by name on Column Selectors.

Data Source

  • Supported connection to multiple mongodb hosts of a replica set.

Data Wrangling

  • On Summary View and Table View, column names which are used in the right hand-side step that is currently selected are now highlighted.
  • Supported Binary (Two Classes) in Create Bins (Category) Dialog
  • Supported “Remove Text” and “Remove Text (All)” as Text Column Operation
  • Supported column search by name on Column Selectors.

Others

  • Supported multiple steps selection without explicity changing to edit mode
  • Project can be duplicated now.
  • Summary View: Added Standard Deviation as a metric on numeric column.

Bug Fixes

Communication/Reporting

  • Chart did not show in the center of the slide in 16:9 mode.
  • Markdown metadata json file could become very large in size.
  • Exported html file name for dashboard and slides were “note.html”. Now it is renamed to “dashboard.html” or “slides.html”.
  • Short Cut Key for inserting a link on RMarkdown Note was setting text range in the wrong place

Chart

  • Show detail showed nothing in Scatter chart.
  • Showing the trend line hover tooltip was hard.
  • “Number of unique values” warning were shown where it should not, if the current data frame was grouped.
  • Table title was not aligned to the center of the table.
  • Reference line was showing partially.
  • Reference line did not show in the first chart if you use color from repeat by in some cases.
  • Reference line was not bound to y2 axis.
  • Extra spaces were there on both side of the Bar chart in Repeat By case.
  • Legend did not show if multiple y axes have same configuration in Bar chart.
  • Histogram errored out if you use a column including Inf/-Inf and custom bucket.
  • Sample size was not shown in Bubble chart.
  • Circles in legend were not even in Scatter and Bubble charts.
  • Reference line support in Histogram.
  • Bar chart reference line broke if you assign TXT function on the numeric column assigned to X Axis.
  • Bundled popular geojson maps.
  • X/Y axis order was broken if categorical columns were assigned to x/y in Scatter chart.
  • Trend Line data range for all group should be calculated within each repeatby.
  • Handle a column assigned to color as a group by column in Bubble chart.
  • Sort did not work on logical column in Table.
  • y2 axis did not show correctly on horizontal Dual-Y Bar chart.
  • Chart legend did not honor the factor order.
  • Circles did not show correctly in Scatter chart.
  • Viz “Show detail” dialog showed empty or not filtered data for some cases
  • Chart filter showed internal function names.
  • Unwanted space pushed viz down even after error message for step cleared.
  • Longer column name pushed value to the right on Viz Show Details Dialog.
  • Incorrect Unique value warning was raised on Viz View even if the number of unique value is very low.

Analytics View

  • Anomaly Detection Analytics View: With Repeat By, titles for each facet was missing.
  • Maximum row numbers of tables in Analytics View was too small. (The maximum is changed to 1000.)
  • Allow only logical for survival event status column
  • Hitting “Enter” key on Multi Column Selection Dialog does not work
  • Analytics View does not work properly when “Adding New Step” exists on right hand side step list
  • On Analytics View, not all the variable names are visible unless you open the Multi Column Dialog
  • On Analytics View, Multi Column Selection Dialog shows empty data
  • On Analytics View, Multi Column Selection Dialog does not allow users to select more than 300 columns
  • Regression Analysis : Error was thrown when there were no significant coefficient
  • Clicking Non-existent Yearly/Weekly tab triggered unnecessary spin icon rendering on Prophet Analytics
  • Label did not show up on Similarity Map on Distance by Category under certain conditions.
  • Thumbnail for last opened tab was not captured.
  • Thumbnail for other viz was not displayed when a last selected viz is pivot or table.
  • Distance by Category: Error was thrown when Category column name had space in it.
  • Analytics View: Coefficents Scatter plots in Linear/Logistic/Cox Regression Analytics was not correctly sorted by the values of coefficients.

Data Source

  • Column Data Type guessing was skipped when updating existing Data Frame
  • For MongoDB, default data frame name should be collection name instead of “dataframe”
  • Switching connection on Update Dialog does not work
  • Cannot get schema info from Amazon Redshift
  • On CSV Import Dialog, default value for Trim White Space parameter was not “Yes”

Data Wrangling

  • Inf/-Inf was shown as NA on Table view
  • Error was raised for filter command when there was incomplete token
  • On filter dialog, it was not possible to select values from list of values when window height was small
  • Unwanted default name “dataframe” was automatically set when data frame name was not specified on Create Data Frame Dialog
  • List Of Values were not reflecting the previous operation inside the same Mutate
  • Max width was not set dynamically for a token inside data wrangling step.
  • stem_word function threw error.
  • SIGPIPE error was occasionally thrown.
  • Reset button was not working as expected on Command UI
  • Error was not displayed even if a custom command uses invalid statement
  • Drag and drop Branch Lists caused corrupted transformation steps
  • Expression generated by Column Header menus for operations like ”% Difference from” was missing * 100 to make the result in percent.

Others

  • Process remained after shutdown on windows7
  • Non-ascii user first/last name was not shown on desktop.
  • When copying a dataframe, Analytics was not copied along with it
  • Data Refresh on Server : Error “error code 3” was thrown when dataframe name started with _
  • Edf export did not work after cancelling R
  • Exploratory Desktop did not start up when there is existing Rserve process

v 4.2.0.6 (Windows Only)

Released on 2/19/2018

Bug Fix

  • Exploratory did not start up for the second time inside a firewall that silently ignores outgoing connection.

v 4.2.0.2.1 (Mac Only)

Released on 2/19/2018

Bug Fix

  • Exploratory did not start up for the second time inside a firewall that silently ignores outgoing connection.

v 4.2.0.5 (Windows Only)

Released on 2/3/2018

Bug Fixes

  • R temporary Directories that look like %HOME%/AppData/Local/Temp/RtmpXXXX (XXXX are alphabets or numbers.) were left without cleaned up, consuming disk space.
  • NW.js temporary Directories that look like %HOME%/AppData/Local/Temp/nwXXXX_XXXX (XXXX are numbers.) were left without cleaned up, consuming disk space. (In this relase, the directories are still left, but they are empty so that it will not consume disk space. We will keep looking into solutions to remove those directories cleanly.)

v 4.2.0.4 (Windows Only)

Released on 1/30/2018

Bug Fixes

  • PostgreSQL connection with SSL was not working.
  • Blank screen was shown at start up on Windows 7, when .NET framework was not installed.

v 4.2.0.3 (Windows Only)

Released on 1/28/2018

Bug Fixes

  • When updating imported data from PostgreSQL/Redshift, multibyte characters were garbled on Windows.

v 4.2.0.2

Released on 1/23/2018

Bug Fixes

  • It was possible to overwrite catalog data for existing data source step with newly created data source step. It would later cause errors with message “Error: It looks like the data frame file is broken and cannot open it.”.

v 4.2.0.1

Released on 1/23/2018

Bug Fixes

Installer

  • Making use of existing R was not working.
  • Installer now detects old .NET Framework on Windows 7, which would cause login to fail.

Chart

  • When month extracted from Date column was set to x-axis, and Repeat By was applied, chart was broken with wrong x-axis values.
  • Bar Chart: Applying ”% of Total” function on y-axis showed wrong values when drawing a chart with single bar by means of not specifying x-axis column.
  • Line Chart: X-axis range became wider than necessary, when Repeat By column was specified.
  • Scatter Plot: When the column for the first y-axis of multiple y-axes was unset, an error was raised with message “Cannot read property ‘isNumeric’ of null at eval”.
  • Single Value: When the number to show is 0, an error was raised with message “Cannot read property ‘slice’ of undefined”.
  • Pivot Table: When one of existing multiple value columns was unset, an error was raised with message “Error at : VizView.generateViz : TypeError: Cannot read property ‘func’ of null”.
  • GeoJSON data download was not cancelable.

Data Wrangling

  • It was possible to drag/drop a branch step into among main branch steps, which should have been disallowed.

Data Source

  • ODBC connection without user name did not work.

v 4.2

Released on 1/3/2018 Release announcement blog post

Enhancements

Communication/Reporting

  • Introduced Dashboard
  • Change History dialog with capability to revert Note/Slides/Dashboard to any one of older status.
  • Note/Slide: Added Information Dialog from where you can see list of Vizs and Analytics used in the Note/Slides.
  • Note/Slide: Chart Selection Dialog now remembers the lastly selected Data Frame.

Chart

  • Added Pie/Ring chart.
  • Added Bubble chart.
  • Added Single Value as a chart so that it can be displayed on Dashboard.
  • Show Detail menus on charts, with which you can take a deeper look at the portion of the data the part of the chart represents.
  • Keep Only / Exclude menu on charts, with which you can create a viz filter.
  • Added new Window Function (cumulative sum ratio, % of max, % of min, % of first, % of last, % of mean, and % of median)
  • Dual y-axis for Bar, Scatter, and Line Chart.
  • Viz Filter with custom command.
  • Reference Line for Bar, Line, and Scatter Chart.
  • Added ”% of TRUE” and ”% of FALSE” to Column Menu for logical data type columns.
  • Pivot Table: Supported Sorting within Group.
  • Line Chart: Made data range and incremental value configurable for y Axis.
  • Line Chart: Trend Line Support.

Analytics View

  • Added Analytics View for Princepal Component Analysis.
  • Variable Importance: Added Effects Viz. It visualizes how the important parameters affect the target value making use of edarf package.
  • Variable Importance: Added “Fix Imbalanced Data” option to binary classification case. It balances data with majority class and minority class with SMOTE algorithm, for better binary classification result.
  • Variable Importance: Made sample size adjustable
  • Variable Importance: For classification, model prediction quality as a whole as well is shown as per-class quality.
  • Variable Importance: AUC is shown as additional model metrics in case of binary classification.
  • Variable Importance with Time: Made sample size adjustable
  • Regression Analysis: Added Logistic Regression support.
  • Regression Analysis: Added “Fix Imbalanced Data” option to Logistic Regression. It balances data with majority class and minority class with SMOTE algorithm, for better binary classification result.
  • Regression Analysis: Made sample size adjustable
  • Anomaly Detection: Added support for more aggregation functions such as number of unique values within each time period.
  • Anomaly Detection: Added “Anomaly with Expected” view, where expected values are shown alongside the anomalies.
  • Time Series Forecast Analytics View: Added support for more aggregation functions such as number of unique values within each time period.
  • Overall robustness improvement on all Analytics Views.

Data Source:

  • Added Raw Lines Data Source to read entire line as one column.
  • Added a slide switch to switch between Sample Data mode, which is for faster calculation in Exploratory Data Analysis phase, and regular mode.
  • Google BigQuery: Now you can schedule processing of data from Big Query at exploratory.io server.
  • Added Enter-key shortcut for saving data.

Data Wrangling:

  • Added fill command, which fills NA data with previous/next non-NA value.
  • Added exp_balance command, which fixes imbalanced data with SMOTE algorithm.
  • Custom Label Field for Manual Method in Create Bin (Categories) Dialog
  • Added “Convert to Integer” menu to Column Header Menu for numeric columns.
  • Added Multi Column Operations (mutate_at/mutate_if) to Multi-select Column Header Menu.
  • Now you can reorder Transformation Steps by Drag-and-Drop.
  • New Date Filter options, such as half-year, bi-month, previous period, etc.
  • Supported in, and not-in operator in Filter Step for numeric columns.
  • Now we save custom command even when it results in error, so that you can keep editing it to iteratively fix it.
  • Now we save a step that returns no data as a valid step.

Bug Fixes

Chart

  • Clicking window function link opened a wrong dialog.
  • Error Bar: Window Calculation type stayed “none”, even if it is applied.
  • The bubble (pop-over) is not showing up when mouse over.
  • Window Calculation was not applied if result was sorted.
  • Scatter Plot raised errors with following message. : “Error at : VizView.updateViz : Error: Error in mutate_impl(.data, dots)”
  • Pivot Table: Unique values estimation was incorrect and showed false alarm.
  • Histogram: When with facets, bucketing was not done for each facet.
  • Stacked Bar Chart with Repeat By without X-axis column was broken
  • Map - Long/lat: Error when trying to add “Size” parameter.
  • GeoJSON Map raised error if you used “sum”.
  • Histogram: When used on difftime column, error is raised.
  • Viz Filter: If Column Data Type was changed from Character to Factor filter became disabled.
  • Mouse over bubble tip was showing the wrong values
  • Scatter: disable text sort on x and y if scatter lines by label case

Data Source

  • RScript Data Source: Last line in the editor was not fully visible.
  • Dremio: Default port and server (localhost) was not set in the form.
  • Dremio: After Test Connection is canceled R process was remaining, preventing other operations.

Data Wrangling

  • mutate command string was truncated if the same number was repeatedly entered.
  • Step message was not showing when moving from a data content tab to another tab
  • After re-import data, table Data did not get refreshed
  • Syntax suggestion: Column name was suggested inappropirately when cursor was in a quoted position.
  • Table/Summary/Viz View: When error happened, previous data was shown. We now show a blank pane in such cases.
  • Summary View: Content inside was not automatically resized.
  • Branch root link did not get updated right after deleting the step.
  • Refresh All was not refreshing all Data Sources when the Viz to refresh was pinned on a step.
  • Disabled step was not distinguishable when in branch
  • Rename command: Tab character inadvertetly added at the end of new column caused error.
  • Duplicated Data Frame, Note, Script was not highlighted correctly.
  • R Script Editor: Cursor position shifted incorrectly.
  • R Script Data Source: Not very helpful “error code 3” error was raised when there was syntax error.
  • Filter Command: Delete icon disappeared when changing the operator.
  • Create Bin Dialog: Infinite loading icon remains, when the dialog was opened.

Analytics View

  • Analytics Viz display was broken when left-hand-side object tree pane was collapsed/expanded.
  • Anomaly Detection with time unit of minute or second raised error.

Communication/Reporting

  • Vizs in Note was not calculating data from the last step of data frames correctly.
  • Trying to share data which was originally imported via edf raised error.

Others

  • Installation screen did not fit in the default window size. (Windows Only)
  • Supported Cancel for local package install on Windows

v 4.1.0.4 (Mac Only)

Released on 12/15/2017

Bug fixes

  • Could not connect to Dremio after installing Dremio ODBC Driver 1.3.14.1043. (Mac Only)

v 4.1.0.3 (Windows Only)

Released on 12/13/2017

Bug fixes

  • Installation failed when R 3.4.3 is selected as the version of R for Exploratory to work with. (Windows Only)
  • Custom R package install with local package file did not work for some packages. (Windows Only)

v 4.1.0.2

Released on 10/28/2017

Enhancements

  • Added “Convert to Logical” menu to numeric column menu.
  • CSV File Data Source: You can now specify column data type when automatic guess is not correct.
  • Scatter Plot: Now calculation of trend line uses actually displayed sampled data for its calculation for better performance.

Bug fixes

  • Cursor position in Custom Command text area became inaccurate as the command got longer.
  • Tiles on Summary View became unselectable under certain conditions.
  • Result of subtraction was displayed with sequence of 9s, as in 0.999999999999.
  • Create Bins Dialog was broken when displayed under certain conditions.
  • MathJax expression was not displayed.
  • Regression Analysis View threw error when variable name had spaces in it.
  • Rmarkdown Note: Viz was not displayed when the dataframe it is on has a name with special characters.
  • Viz Filter on a Date column did not work.
  • Viz Filter on a difftime column raised error when filtering result had zero rows.
  • Regression Analysis now pre-filters Inf/-Inf instead of throwing error.
  • Variable Importance View: Confusion Matrix with a logical prediction target column was shown with FALSE row/column before TRUE row/column.
  • Tables in Regression Analysis View showed numbers with only 4 digits precision. Now we show numbers in 10 digits precision.
  • Plus button menu was cut off when left-hand side object tree was hidden.
  • Survival Analysis View: Parts of Survival Curve was missing when displayed with both Colors and Repeat By.
  • A/B Test View: Parts of Posterior Curves were missing when displayed with both Colors and Repeat By.
  • Line Chart: Parts of lines were missing when both Color and Repeat By columns were specified.
  • Scatter Chart: Trend line was not drawn at all when data included infinite values. Now infinite values are pre-filtered as outliers and then trendline is drawn.
  • Timeline Forecast View: Yearly seasonality was applied for data shorter than one year by default, resulting in unreasonable forecast.
  • Exported R script for File Data Sources such as CSV Data Source wrongly had type_convert step in it.
  • Pivot Table: Right-hand side control column disappeared under certain conditions.

v 4.1.0.1

Released on 10/22/2017

Bug fixes

  • Creating a new GeoJSON map raised error.

v 4.1

Released on 10/21/2017

Enhancements

Rmarkdown Note

  • Presentation Slide
  • TOC support
  • Remote Image support
  • Image file drag and drop.
  • Image embedded inside Table
  • Embedding Youtube Video.
  • Embedding Twitter Card.
  • Performance improvement.
  • Rmarkdown Note now remembers previous cursor position when reopened.
  • Support for Code Folding.
  • Shows more granular messages on what Exploratory is working on while processing Rmarkdown Note.
  • Support for description text for published Note.

Chart

  • Filtering Data is supported inside Charts.
  • Chart Data is now exportable as CSV, Excel, JSON, and to the clipboard.
  • “Number of Not NA” and ”% of Not NA” are added to the list of Chart Column Functions.
  • Scatter: Support for connecting dots with line.
  • Length of Trend Line is now adjusted for actually plotted sampled data points for better visualization, while the Trend Line itself is calculated from entire data for accuracy.

Analytics View

  • Regression Analytics View is added.
  • Analytics View data is now exportable as CSV, Excel, JSON, and to the clipboard.
  • Time Series Forecast: “Data” view, where data is exportable, is added.
  • More granular messages on what Exploratory is working on is shown while Analytics View is running.

Data Source

  • Connection to Dremio
  • Connection to SQL Server
  • Renewed SQL Editor UI.
  • Renewed R Script Data Source Editor UI.
  • Google Analytics: Support for E-Commerse dimensions/metrics.
  • Stripe: Support for Query String to filter query with specific conditions.
  • More detailed schema information is visible for Amazon Redshift, PostgreSQL, and MySQL.

Data Wrangling

  • Step Data is now exportable as Excel file, in addition to previously supported CSV, Excel, JSON.

Collaboration

  • Tag support at publishing Note, Chart, and Data to exploratory.io.

Others

  • Project Search now looks at note/script names while finding projects.
  • Script Editor: Indent Guides is added.
  • We now use Hack font for code editors.

Bug fixes

  • Data export from pivot table did not work if a column was assigned to multiple places in the pivot table.
  • Custom R package install did not have Cancel link while running.
  • OAuth Connection disappeared from UI when it was expired or revoked.
  • Project List: Sort by Name did not work.
  • Test data ratio was not correct when a model was created by custom command.
  • Specifying numeric NA String (for example -9999) for Excel did not work.
  • Adding remote image link in Rmarkdown Note raised error : “pandoc document conversion failed with error 67”
  • Export or project with a name that starts with multibyte character failed.
  • Exported R script did not have type_convert() function unlike how it is treated inside Exploratory, which in some cases caused errors when the exported script is run.
  • Data exported from Pivot Table was filtered and not complete.
  • Command UI did not show list of columns when previous step was disabled.
  • SQL suggested in PostgreSQL data source dialog did not have necessary double quotes.
  • “Predict on Test Data” menu was disabled for a Custom Model.
  • Long-Lat Map: Legend was not showing up when there was NA in the data.
  • Errors were raised sporacically : “Bounds are not valid”
  • Having a missing local image file link stopped whole Rmarkdown Note rendering.
  • Analytics: Chart setting was not saved when showing/hiding left-hand side Data Frame tree area.
  • Thumbnail image was not added/updated when sharing a Chart.
  • Adding new entry with + (Plus) button failed on “Replace Existing with New Values” dialog.
  • No spin icon was shown when switching between Analytics Viz tab was taking time.
  • Last Import timestamp was not updated when “All Referenced Data Frames” option was selected on a branch.
  • Order of Small Multiple was not respecting the factor order of Repeat By column.
  • Error was raised when importing an Excel file with sheets with multibyte names.
  • Windows: Installation failed when home directory name included multibyte characters.
  • Coping image from Safari or Edge to Rmarkdown Note generated invalid markdown image link syntax.
  • Clicking link in Note in Run mode opened a window with the link content, but did not open a web browser. Now we open a web browser.
  • Copied viz did not have thumbnail image when published
  • When an empty Data Frame was fed to Pivot Table, error about “euc2utf8” function was shown.
  • Histogram: Feeding data with Inf (infinity) or -Inf (negative infinity) raised error about “summarize_impl” function.
  • Building Random Forest model with training data that has NAs raised error.
  • Making prediction on new data failed with some models including Random Forest.

v 4.0.3

Released on 9/16/2017

Bug fixes

  • R installed on a drive other than C was not recognized at installation of Exploratory. (Windows Only)
  • Switching between multiple RMarkdown Notes sometimes mixed up the note contents.

v 4.0.2

Released on 8/27/2017

Enhancements

Analytics View

  • Support Repeat-By with A/B Test Analytics View.
  • Renewed Viz Property Dialog for finer control of viz.
  • Added Survival Table View to Survival Analysis
  • End Time of Survival Analysis View and Feature Importance with Time View now defaults to today, if not specified.
  • Japanese Translation on some Analytics Views. (Cohort Analysis, Survival Analysis, and Feature Importance with Time.)

Rmarkdown Note

  • Mobile support for RMarkdown Note shared on server, and exported as HTML.
  • Charts in RMarkdown exported as HTML now loads incrementally.
  • Support ggplot out.width=“full”
  • Added R code block tool button.
  • Added “Open in Browser” button
  • Now table to display data frame in R code block is with pages.

Others

  • Support Google Analytics Content Experiment dimensions
  • Scatter/Map: Now you can specify data sample size to plot.
  • Added add_row Command Menu
  • Annotation text is now embedded as comment in generated R Script.

Bug fixes

  • Improved error message when there was non-existent local image file link in RMarkdown Note.
  • After restarting R, chart rendering in RMarkdown failed.
  • SIGPIPE error occasionally happened when rendeting RMarkdown Note.
  • Rendering of Analytics Chart embedded in RMarkdown occasionally failed.
  • Embedded R script in RMarkdown Note referencing Exploratory Data Frame occasionally failed rendering.
  • Change made in Analytics View was not immediately reflected to Chart embedded in RMarkdown Note.
  • Markdown Note: Viz table with single column railsed error: “TypeError: data[1].forEach is not a function”
  • Heatmap-Map was broken in markdown note exported as HTML.
  • When new Analytics is created along with existing Analytics, changes in existing Analytics was not saved.
  • In Excel Data Source Dialog, long file path name overflowed in the screen.
  • Correlation Analytics View: Diagonal pixels in heatmap was wrongly displayed with value 0.
  • When JSON data import is canceled, spin icon did not stop correctly.
  • Analytics View: “Underlying data has changed” message was not correctly displayed after pin, unpin and adding new step.
  • Variable Importance Analytics View: Improved performance especially when there are many rows and many categorical predictors.
  • Heatmap: If categorical data for X/Y axis happens to consist of only number characters, heatmap is not displayed.
  • Adding and then removing all Analytics or Rmarkdown on a project created before version 4.0 caused inability to add new Analytics/Rmarkdown again.
  • When data for analytics viz which was embeded in Rmarkdown was updated and updated viz was displayed on Rmarkdown, viz on original analytics view page was not updated accordingly.
  • Dialog for renaming a script did not show up when menu is clicked.
  • Pivot Table: Could not specify Number of Rows as a 2nd measure of a Pivot Table.
  • GeoJson Map: Color was not displayed when GeoJson key property was automatically selected by default.
  • Scatter Plot: When X axis is a categorical data, its order was not honored when Color By column was specified.

v 4.0.1

Released on 8/8/2017

Bug Fixes

  • Markdown Note: Analytics Chart insertion button did not work.
  • Markdown Note: Fonts used were not consistent.
  • Markdown Note: Preview was broken occasionally after inserting Chart from Analytics page.
  • Markdown Note: When a Note is exported as Word document, table in it was broken.
  • Cohort Analysis Vew: Y-axis value of Retention Rate chart was wrong.
  • Cohort Analysis View: Time aggregation level of By-Time Chart was always set to Month regardless of configuration.
  • Time Series Forecasting View: Time aggregation level of Forcasted Chart was wrong when it was set to Month or Quarter.

v 4.0

Released on 8/7/2017 Release announcement blog post

New Features

  • Analytics UI
  • Markdown Editor for Note
  • A/B Testing with Bayesian Statistics
  • New Source Step Editing
  • Data Source Extension Updates - Weather, Stock

Enhancements

Chart

  • Supported “Sync Scale” options for X and Y separately.
  • Added “Month Name”, “Week Day” functions for Date data type.
  • Pivot: Supported Grand Total calculation.
  • Pivot: Added property configurations for Column/Row header labels.
  • Pivot: Supported column header sorting.

Data Source

  • Google Analytics: Supported Goal Metrics on from Goal 1 to Goal 5.
  • Excel Data Source Dialog: Added “Guess Data Type” parameter

Analytics Functions

  • do_t.test function: Means columns in the output data frame was ambiguous about which column was for which input group. Now output is with columns named after the input group it is associated to.
  • do_anomaly_detect function: “longterm” argument is now automatically picked for best result without the need to set it explicitly.

Bug Fixes

Chart

  • If you assign factor to color in geoJSON, the default metrics was “count”, but changed it to more appropriate “first”.
  • Histogram color was not in TRUE, FALSE order if logical was assigned.
  • Added easy-to-understand warning or description at chart pin.
  • Scatter Plot errored out if column assigned to color becomes unavailable.
  • Margin option was not showing in Heatmap/Contour.
  • Window function label was incorrectly shown on Scatter Plot
  • X axis tick labels did not show in Boxplot with Repeat By.
  • Map: Legend was missing in the exported PNG file.
  • Pivot: Exported pivot data did not support multiple measures.
  • Chart configuration was lost when it fails to refresh joined data frame.

Note

  • Note refresh did not refresh chart data.
  • When exported to HTML(svg), Chart did not show scrollbar, and was truncated instead.

Data Wrangling

  • Join Dialog: “no variable to join” error was shown when it should not.
  • Command Dialog: UI was broken after toggling Auto Run checkbox.
  • Command Dialog: Duplicated green token was showing up when Auto Run checkbox was off.
  • group_by with Japanese column name did not work.
  • impute_na function did not work with factor.
  • row_as_header applied to factor column did not work.

Data Source

  • MongoDB: Connection failed if password contained special characters.
  • Database Data Source Dialog: “Another R process running” error was raised when “Update” button was clicked.
  • Data Connection Dialog: For OAuth connections, Connection Dialog was wrongly closed when coming back from browser after giving permissions.
  • Database Data Source Dialog: Columns were not listed under the left hand side tree if the table did not have data.

Analytics

  • Anomaly detection with non-UTC time zone data did not work.

Project Export

  • Project export on windows did not work when user’s home directory name contained space character.

v 3.5.0.2

Released on 6/9/2017

Bug Fixes

  • Transformation Step - “Copy as Data Frame” menu is not visible when on a Branch.
  • Heatmap/Contour - Margin options do not show up.
  • Boxplot - X axis labels do not show up with “Repeat by”.
  • Market Impact Analysis fails with various errors such as “Error in parse(test = x, keep.source = FALSE)”, when market column has values with special characters or starts with number.

v 3.5.0.1

Released on 6/6/2017

Bug Fixes

  • Typos in UI labels.

v 3.5

Released on 6/5/2017 Release announcement blog post

New Features

  • Annotation for Steps
  • Causal Impact Analysis
  • UI translation - Japanese

Enhancements

  • Performance improvements - Overall
  • Separate command - Fixed width position support
  • Pivot Table - Row with Group Level support for Color Scale and ”% of Total’ calculation
  • Pivot Table - Multiple Measures support - You can add multiple columns to Value.
  • Line Chart - You can control the line width and circle size now.
  • Chart: Error Bar - Standard Deviation support.
  • Map GeoJSON - Extra label column support
  • Chart Tab - Larger thumbnail images on hover
  • SVD UI refresh
  • Pivot Data Export: Support setting delimiters.
  • Export Data: JSON output support
  • Installer improvements
  • Chart: show ’%’ on axis labels, in balloons, values on plot area for % based chart
  • Google Sheet Export: Support Overriding Existing Sheet
  • Data Import Dialog Preview Table - It now shows the number of the columns along with rows.
  • Recode UI - It now supports numeric data type columns.
  • Arrange (Sorting) - You can select multiple columns and select ‘Arrange’ from the column header menu.

Bug Fixes

  • Map GeoJSON - The min number in the legend was not reflecting the actual data.
  • Tokenize Text - Regular Expression as the separator was not producing appropriate results.
  • Target data frame is not showing up in the list in Join dialog when the last step is not selected.
  • Pivot should return a better message when the result of previous step is empty
  • Summary: POSIXct shows only 1 bar in histogram
  • Projects are not displayed in project list when there is an underlying error with the package validation.
  • Table View - Floating point numbers are not showing up correctly
  • Transform Step - When a branch is deleted, it was not removed from the branch list of the Transform Step from which the deleted branch was starting.
  • When a join target data frame was renamed, steps after the join step kept old data before rename, and was not automatically refreshed by further updates in the join target data frame.
  • Cannot build a Survival Model with an error message “object ‘Ccoxmart’ not found”. (Windows Only)
  • Note - Exported chart image is blurry

v 3.4.6.0

Bug Fixes

Released on 5/20/2017
  • Install fails with an error message “Failed to install R packages. This happens sometimes due to ‘Real Time Virus Scan’ or other reasons.”. (Windows only)
  • Displaying Summary View fails with an error message “Error in hist.default(x, plot = FALSE) : invalid number of ‘breaks‘“.

v 3.4.5.2

Released on 5/18/2017

Bug Fixes

Released on 5/11/2017
  • Cannot open projects on Windows with an error message “Retry failed…”. (Windows Only)
  • Cannot create a new project on Windows with loading icon. (Windows Only)
  • Cannot open the custom color picker dialog. (Mac only)

v 3.4.5.1

Released on 5/16/2017

Bug Fixes

  • Failed to run Time Series Forecast due to the ‘zoo’ package not installed.
  • Failed to run Time Series Forecast when the existing command with ‘growth’ parameter.

v 3.4.5

Released on 5/14/2017

New Features

  • Pivot Data Export - Now you can export the data presented in the Pivot Table view as CSV.

Enhancements

  • Google Sheets Data Export - Now you can overwrite the existing sheet data instead of creating a new sheet.
  • Data Re-Import - Now you can reload the data for all the data frames, which are referenced from the current data frames, from the corresponding data sources.
  • Added new aggregation function menus for ‘na_count’ and ‘na_pct’.
  • Added a link on the embedded Viz in Note so that you can navigate to the Viz in data frame directly.
  • Filter - Now you can also type the (filter dialog) honor user entered value even if it does not match LOV Note export code refactoring
  • Updated the wording around ‘Create Bucket’. Now we call it ‘Category’ to simplify.
  • Add additional functions (min/max/mean/median) for Window Calculation of “Difference from”/“% Difference from” for the column header menu and chart.

Bug Fixes

  • Showing a blank chart area when opening a data frame whose default view is set to non-first chart tabs.
  • Logical data values (TRUE/FALSE) are not sorted correctly inside the legend for Map-GeoJSON.
  • Viz title footer is not shown correctly for Pivot Table in Note.

v 3.4.4.1

Released on 5/7/2017

Enhancements

  • Added “Convert to Local Timezone” menu to POSIXct columns.

Bug Fixes

  • Transformation Step - bind_cols: Error Dialog popups when a bind_cols transform step is clicked on right hand side list.
  • Transformation Step - Custom command: Data source file path info is displayed for custom command steps.

v 3.4.4

Released on 5/6/2017

Enhancements

  • Document overhaul - We have updated the documents (https://docs.exploratory.io/) to cover all the features of Exploratory Desktop. Some of the pages are still going through updates, but you can see what’s there at the high level including Data Import, Data Wrangling Commands, Visualization, and Machine Learning / Statistics. Also, you can search the document to find your interested topics easily.
  • Summary View - We have brought Summary View back as the default view for the data frames again!
  • Each Data Frame now remembers the last-opened view of either Summary, Table, or Viz view so that it will show you the last opened view when you open the same data frames.
  • Chart: Set larger png/svg export default size for the chart export.
  • Chart: add show title properties.
  • Performance improvement of Table View when there are many columns.
  • Performance improvement when deleting a Data Frame.

Bug Fixes

  • In MongoDB data source dialog, the logical values (true/false) are not matching. MongoDB uses them in lowercase but the table is showing them in uppercase.
  • Chart: Cannot scroll Small Multiple chart when it overflows.
  • Chart: It throws an error when the previous step of the transformation has no data.

v 3.4.3

Released on 5/4/2017

Enhancements

  • Added “Anonymize Text” column menu
  • Added “Concatenate Text” column menu
  • Added property checkboxes to show/hide title text on a chart

v 3.4.2.1

Released on 5/2/2017

Bug Fixes

  • In Time Series Forecasting, forecast result degrades to linear trend line without seasonality taken into account.

v 3.4.2

Released on 5/1/2017

Enhancements

  • Show ‘%’ on value text such as axis tick label, balloon text, and value text on plot area if chart is based on percentage.

Bug Fixes

  • Irrelevant error message “Error in if (conn) {: argument is not interpretable as logical” is showing up when there is an error in SQL query.
  • Factor values on Summary View overflows outside of the tile area.
  • Variable replacement in SQL by @{<expression>} is not working.
  • In Time Series Forecasting, meaningless weekly seasonality is returned even when aggregation level is larger than week.
  • Only one bar is showing up for Date/POSIXct data in Summary View
  • Bar order should be ‘TRUE’, ‘FALSE’, ‘NA’ for logical data in Summary View.

v 3.4.1

Released on 4/29/2017

Bug Fixes

  • Chart - Character data type has become Date automatically for Boxplot X-Axis
  • Excel Data Source - Not all rows are imported after clicking Save button.
  • Export to Clipboard - Exported character data is quoted by double quote when pasted to Numbers on Mac.
  • Summary View - Bars for Factor columns are not sorted appropriately by the factor level when there are more than 300 levels.
  • Time Series Forecasting - Specifying Strength of Holiday Effect results in an error.

v 3.4

Released on 4/27/2017

New Features

  • Export to Google Sheet - You can directly export data into Google Sheet.
  • Export to Clipboard - You can copy the data to the clipboard so that you can paste it to other applications like Excel, Numbers, Email, Text Editor, etc.

Enhancements

  • Improved stability of the database connections by checking validity of the connection.
  • Introduced Export and Publish buttons at the top level. You can export data or save charts from Export button. And you can publish your data or charts to share or schedule.
  • Moved ‘Reload’ button to the top, next to the data frame name, and renamed it to ‘Re-import’. It’s also showing the last imported time.
  • MongoDB - Upgraded the underlying library of ‘mongolite’ to 1.2 for a better performance.
  • MongoDB - Introduced a connection pool. This will make your query performance a bit faster since it won’t need to create a connection every time you run the query while you are in the MongoDB data import dialog.
  • MongoDB - Introduced ‘Big Integer as Character’ option to bring the data values as character instead of as double.
  • MailChimp - Added “Date Range” options to get last N days/weeks/months/years
  • MailChimp - Added “Members” and “Subscriber Activities” for “Data Type”
  • Stripe - Added “Date Range” options to get last N days/weeks/months/years
  • Chart - Introduced ‘Layout’ button which will open the layout configuration dialog. This used to be accessed from ‘More’ button.
  • Chart: Table Viz - URL link support in Table
  • Chart: Map now remembers zoom level and location on each move/zoom action
  • Chart: “more” tab: now even if there are many vizs, tabs do not wrap to next line.
  • Model: XGBoost: Added ‘na.action’ parameter for model training.
  • Model: XGBoost: Added sparse model support. Sparse model is used when it’s indicated by a parameter or when there are categorical variables.
  • Project Search - Added the chart names and data source names to the search index.

Bug Fixes

  • MongoDB - Typing ‘null’ was ignored or showing error sometimes.
  • Twitter: non-ASCII characters in Search was not returning appropriate results.
  • PostgreSQL / Redshift - Database connections were not accessible due to the connection pool timeout.

v 3.3.0.2

Released on 4/14/2017

Bug Fixes

  • Fixed issue that SPARQL data source extension fails loading data with error : “Error: package ‘RCurl’ could not be loaded”

v 3.3

Released on 4/12/2017

New Features

  • Scheduling Insights at Exploratory.io
  • My Insight Page - Single place for al your insights.
  • Time Series Forecasting with Prophet
  • GeoJSON Map Extensions UI
  • Data Source Extensions UI
  • Insight Template Extensions UI
  • UI for Creating Buckets
  • UI for Mapping Data
  • Search Project and Data Frame at Project Page
  • OAuth as Connection - Global OAuth Management - Now you don’t need to see the OAuth screen for creating every new data frame with Google Analytics, Google Sheet, Twitter.
  • Chat with Exploratory Support Team - Now you can ask questions within the desktop app.

Enhancements

  • Chart: Support Copy
  • Chart: Histogram - Color Support
  • Chart: Auto-detect column names in chart range setting
  • Chart: Small Multiple: show title and title font size for y axis for small multiple case
  • Chart: Added ‘Y-axis : Include 0 or not’ property for Line chart
  • Chart: Error Bar: Support ‘Direction’ for Color like Bar chart
  • Table view: Keep the current table position before / after running commands
  • Pivot Table: Sorting support
  • Build Model: Support Custom Entry for Formula
  • XGBoost - Categorical column support
  • XGBoost - More metrics for Summary view
  • New function: K-means at a column level.
  • New function: Impute NA
  • Prediction: Now you can apply the machine learning model to another data frame other than the training and the test data sets.
  • Support large document data for tokenize / count pair functions.
  • Performance Improvements for Database Data Import Dialogs including ODBC, PostgreSQL, Amazon Redshift, MySQL.
  • Introducing a way to configure the repository location.
  • Support copying long text in a cell from table view. (Cell detail comes up by click instead of hover)

Bug Fixes

  • Getting an empty screen when launching the app.
  • Didn’t get any response or got an error for testing ODBC Connection for Oracle database.
  • Viz Tab order was not honored in copied Data Frame
  • ‘name of null’ error is raised while grouping by categorical variables in Viz view
  • Google Analytics: Dimensions and Metrics List of Values disappears when try to grab scrollbar on Windows.
  • Google Sheet: Worksheet Name is not automatically refreshed based on Sheet name selection
  • When an edf was exported from branch, the branch was lost when imported
  • Log File Import fails with Error : guess_max must be a positive integer
  • Chart: Y-Axis Shouldn’t be able to be deleted when there is only one left
  • chart: bars on chart edges are chopped in multi-y, small multiple case
  • Chart: map doesn’t remember the zoom level
  • chart: color order in the custom color palette is applied in an opposite way for the legend
  • chart: show NA as one of categories in repeat by and color
  • Chart: Error dialog shows up with bar chart with huge number of unique values at X-Axis
  • The 21st rows in Table view is not shown up fully

v 3.2.3

Released on 3/13/2017

Enhancements

  • Added Chat window to ask Questions to Team Exploratory directly.

Bug Fixes

  • countrycode function was showing an error when trying to produce ‘country.name’ as outputs.
  • Couldn’t import Statistic data files (SAS, SPSS, STATA).
  • Branch names are not showing up in ‘Merge (Set Operation)’ dialog.
  • Fixed R packages installation issues at setup time.
  • Needed to pick up quanteda fix about library() error that is not yet released on CRAN.

v 3.2.2

Released on 3/7/2017

Bug Fixes

  • Fixed issue that building XGBoost model fails with “R error: Error: invalid response (expecting SEXP).
  • Fixed typo missclassification -> misclassification in xgboost functions.
  • Modified time aggregation of do_anomaly_detection from round_date to floor_date.
  • Not to show error dialog at Viz if it is coming from invalid DAG step.
  • Added a support of taking care of a broken user configuration file.

v 3.2.1

Released on 3/3/2017

Enhancements

  • Support ‘Save as EDF’ for Charts.
  • Table view: Keep the current table position before / after running commands.
  • Added ‘Copy Chart’.
  • Shows the thumbnail images when mouse over on the chart tabs.
  • build_kmeans now returns cluster labels as factor instead of as integer.
  • build_kmeans works now supports grouped data frames.

Bug Fixes

  • Fixed an issue that step command was executed when deleting an empty “Add New..” token.
  • Fixed an issue that Pivot with Color By with ‘Row’ option was showing an empty screen.

v 3.2

Released on 2/27/2017

New Features

  • Added Anomaly Detection algorithm with ‘AnomalyDetection’ package.
  • Added XGBoost (Extreme Gradient Boosting) model with ‘xgboost’ package.
  • Added Random Forest model with ‘RandomForest’ package.
  • Added Chi Squared Test.
  • Added Simulation for Survival Model.
  • Support Custom Color Palette with Color Picker.
  • Custom Data Source Plugin - Users can create their own data source plugins with UIs.
  • Added Heatmap on Map.
  • Support Horizontal mode for Bar chart.
  • Shows thumbnail images of the charts included in each data frame when users place the mouse over.
  • Added a ‘pivot’ function - you can use this function to create ‘two-way’, ‘contingency’, or literally ‘pivot’ table.

Enhancements

  • Support Confidence Intervals for Trend Lines.
  • Data Frame / Branch UI re-organization.
  • Column header menu now adds an operation as an extra token within existing step if it’s a same type of operation for Mutate, Summarize, Group By, Select, Rename, Arrange (Sort).
  • Select UI dialog now inherits the previous selection of Include or Exclude.
  • Google Spreadsheet - It shows a list of the worksheet names you can select from.
  • Map: It memorizes the position/zoom where you left the map last time, and restores it when you view it inside Viz/Note.
  • Duplicate as Data Frame - you can select a step in either main or branch data frame and promote it as a data frame with the steps.
  • Duplicate Branch with Charts.
  • Now you can install your favorite R packages from your local file system.
  • Export Data with Steps as EDF (Exploratory Data Format) and save it to the local file system.
  • Generated R Script now supports cases where data frames are joined and / or merged.
  • Pivot Table Viz: Support Text Wrap and Responsive Column Width.
  • Pivot Table Viz: Support Show / Hide the value column.
  • Support no username / password for ODBC connections.
  • Disabled step should be skipped in reproducible script

Bug Fixes

  • Transform Input UI: Error message is not shown
  • [EDF Import] Error Handle when importing EDF has error

v 3.1

Released on 2/8/2017

New Features

  • Added Survival Analysis with Survival Curve and Cox Regression Model.
  • Added Multinomial Logistic Regression support.
  • Scatter - Support showing ‘circle’ to show the range for the dots.
  • Scatter - Support showing trend lines with lm, loess, and gam.
  • Scatter - Support Error Bar.
  • Line Chart - Support ‘Range’ to show confidence interval range.
  • R Script Editor

Enhancements

  • Added anonymize function from ‘anonymizer’ package to anonymize given text.
  • Added ‘forcats’ package to make it easier to work with factor data type.
  • Column names in Data Transformation Steps are now highlighted.
  • Support ‘cancellation’ for database connection testing.
  • Pivot: Show an assigned column name at the top for Column.
  • Scatter - support the circle size even when a column is not assigned.
  • Performance improvements around Data Frames and Steps navigation.
  • Added a command menu for converting ‘difftime’ data to numeric.

Bug Fixes

  • Added an error check to show error message at the app launch time.
  • Added a recovery mechanism so that users will be able to open their projects even when the chart definition files have been broken.
  • ‘statecode’ function now supports DC - District of Columbia mapping.
  • Insert Step menu is not available on branch.
  • Column selection in Logistic Regression form is partially hidden.
  • Error Dialog popups when there is an error on a new step (and step is not saved yet) and try to move to different tab.
  • Changing pinned step status from disable to enable did not refresh viz.
  • Bar chart was not respecting the levels set in Factor columns.
  • Chart: Fill with NA and Same Column assigned to Color and Repeat By produces a blank
  • Chart: Un-sync is not working with Line and Scatter Charts with Small Multiple.
  • Chart: Table Viz doesn’t show up when there is a list column
  • Disabling / enabling step did not fresh pinned Chart.

v 3.0.2

Released on 1/26/2017

Bug Fixes

  • Couldn’t assign a new connection after importing projects from another environment.
  • Data Frame list is not up-to-date when opening Join dialog for the first time.

v 3.0.1

Released on 1/25/2017

Bug Fixes

  • Multi-byte characters (including Japanese) were not handled properly in Import by Writing R Script dialog UI.
  • Getting error pop-up dialog consistently in Viz view after updating or deleting existing steps.

v 3.0

Released on 1/24/2017

New Features

  • Added Model Building and Evaluation for Linear Regression, GLM, Logistic Regression.
  • Added ‘Multiple Columns Selection’ for both Table and Summary views, which will show context sensitive data wrangling commands menus.
  • Added ‘ODBC’ data source type.
  • Added Error Bar as a new visualization type.
  • Added Table as a new visualization type. You can sort a column and show bars to help comparing the values easier.

Enhancements

Chart

  • Chart Color - Added New Color Palettes
  • Chart Color - Default color switch - Users can now choose different color palettes even when a columns is not assigned to Color.
  • Chart - Added support for font size for X / Y Axis tick labels and Legend.
  • Chart - Added support for show / hide grid lines and zero lines.
  • Chart - Save as PNG / SVG with transparent background color.
  • Chart - Performance improvements for Chart rendering at exploratory.io cloud server and collaboration server.
  • Chart - Added ‘Ordered Factor’ Support for Color - Map / Scatterplot.
  • Chart - Log Axis scale support for Bar and Scatter charts.

Pivot

  • Pivot Table - Added ’% of Total’ support. Users can set a direction for calculating the percentage.
  • Pivot Table - Switched the Color formatting logic from ‘equal group’ to ‘equal length’.
  • Pivot Table - Added Column based color formatting along with the existing Row and All.

Map

  • Show sample values from GeoJSON file’s properties in GeoJSON setup dialog UI.
  • Added ’# of Rows’ for Color.

Data Wrangling

  • Added new data wrangling operations with the column header menu. - Move to, Gather, Unite, Analytics, etc.
  • Added ‘Ungroup’ command shortcut under ’# of Groups’ indicator dropdown.
  • Stop words - Support Multiple languages.
    • Danish
    • Dutch
    • English
    • Finnish
    • French
    • German
    • Hungarian
    • Italian
    • Japanese
    • Norwegian
    • Portuguese
    • Russian
    • Spanish
    • Swedish
  • Added ‘convert_to_NA’ function as UI command.
  • Added ‘excel_numeric_to_date’ and ‘unixtime_to_date’ functions to convert numerical values to date / time.
  • Added ‘row_as_header’ function to make one of the rows as column header.
  • Added ‘normalize’ function, which is a wrapper for ‘scales’ function but returns a numeric vector, not a matrix.

Note

  • Note: Improved the experience around the chart embedding in Note.
  • Note: Improved the performance for creating new Note or opening existing one.
  • Note: Support renaming Note name.

Others

  • Support renaming Data Frame name.
  • Added a better handling of ‘space’ or other special characters for data frame names. It now replaces them with underscore ’_’.
  • Added a support for ‘space’ for new column names with data wrangling.
  • Added ‘Duplicate’ support for Note.
  • Thumbnail image generation support for Map. You can see the Thumbnail images for Map when Note is saved locally and also published at exploratory.io.
  • CSV Data Import - Made UTF-8 a fallback encoding for ASCII. This will make the data loading with CSV better.
  • Added ‘Update’ button to upgrade user installed R packages.
  • Show Scrollbar always (Mac). Also, users can choose whether showing the scroll bar or not in the configuration dialog.
  • Improved the text formatting in ‘Import by Writing R Script’ dialog.
  • Added Proxy Server configuration through UI
  • Windows Installation failed to download git and/or R if install path contains space in it.
  • Windows build is now signed with an appropriate certificate.
  • R package install - Use backup CRAN clone when installing additional R package fails.

Bug Fixes

  • Unfinished token was not removed when a user clicks OK button on Command UI Dialog
  • Updating source step does not refresh pinned viz.
  • There is a lag between refresh icon click and actual spin icon shows up timing
  • UI freeze was caused by GeoJSON Map
  • Fixed for Delete First Viz causes Empty Screen
  • 0 was not showing up in Column of Pivot.
  • Logical column values (TRUE / FALSE / NA) were not correctly sorted.
  • Can’t select a column inside Filter dialog for Existing one in Branch
  • Command Line Mode: Flickering after executing the command
  • Chart: Not refreshed when clicking on Refresh button and when it’s pinned
  • Strip semicolon at the end of SQL to avoid syntax error (Released as 2.5.1.5)
  • Avoid parsing and recomposing of SQL to work around replacing of double quoted column name with single quoted string on PostgreSQL (Released as 2.5.1.5)
  • do_tokenize regex option was not saved
  • Reorder the sections inside the generated R scripts.
  • Note: Pivot Table column headers were not showing up.
  • Fixed Viz not rendered with “Adding New Transformation” card selected case.

v 2.5

Released on 12/1/2016

New Features

  • Data Source: Remote Files - You can point to remote files (e.g. CSV, Excel, etc.) and import the data. This makes it easier to refresh the data by simply clicking on ‘Refresh’ button at the top of the data transformation steps (right hand side).
  • Data Source: Presto - You can now query against your Big Data with Presto.
  • Map: GeoJSON Support - You can bring your own GeoJSON and visualize your geospatial semantic data easily and flexibly.
  • MongoDB - Aggregate support - You can build the stage based aggregation pipeline in MongoDB Data Import dialog.

Enhancements

  • MongoDB: Support MongoDB Shell format - Now you can write your queries in MongoDB Shell’s JS format as well as in the original strict JSON format.
  • Google BigQuery: Standard SQL support
  • Support both Auto Run vs. Manual Run modes - You can choose whether you want to run the command automatically or manually in each dialog.
  • We have added new R functions, statecode and countycode, to make the US States and Counties data mapping easier.
  • UI support for ‘get_dupes’ function from ‘janitor’ R package.
  • Note: We have introduced a dropdown list for Data Frames in Chart Selection dialog in Note, to make the chart selection easier and faster.
  • Redesigned UI for Analytics (Correlation, Distance, K-means Clustering, Cosine Similarity) and Text Analysis commands.

Bug Fixes

  • Fixed an issue that the command editor behaves incorrectly when you copied a command with multiple lines into the command editor.
  • Fixed google analytics View ID update issue.
  • Fixed overflow issue on error icon on transform list
  • Fixed an issue that when you change existing “select” command while “Add New” token exists it fails
  • MongoDB: Changed to show error when no collection is selected.
  • Fixed unwanted viz refresh issue when a viz, data share button is clicked.

v 2.4

Released on 11/10/2016

New Features

  • Analysis Step Persistent Data Cache - You can set a particular step(s) to keep the data cache across the sessions so that it won’t run the operation unless you explicitly request. This would be useful when you have a step that would take a long time to complete.
  • Saving Note in HTML - Now you can save it in HTML format.
  • Sharing with URL - You can generate an unique URL to allow anyone with the URL to open Data, Chart, or Note you have published regardless whether he / she has an account at Exploratory or not.

Enhancements

  • Note - You can publish and share your Note in a private mode.
  • Twitter Search / Timeline - Added a Text Sentiment Score option.
  • Google Analytics - Hour of Day column is now automatically converted to POSIXct as default.
  • Opening Chart dialog in Note is much faster now.
  • Chart - The order in Legend is not synced with the order in the plot area.

Bug Fixes

  • DB connection information was not reflected in the generated R script.
  • Bar chart didn’t show up with Repeat By when the data size was large.
  • Chart - Removed unnecessary zero values displayed on the plot area when showing the values.
  • Small Multiple Chart - Bar chart with ’% of Total’ window calculation was broken.

v 2.3

Released on 10/26/2016

New Features

  • Data Wrangling Steps - You can now copy, cut, delete, and disable one or multiple steps together. This would be useful when you want to move steps within the same data wrangling chain or move between data frames and branches. Also, by disabling one or multiple steps you can temporally ignore the steps while you can still keep them just in case you might need them later.

Enhancements

  • Small Multiple - Added Date Aggregation level support
  • Small Multiple - Now you can have Boxplot in Small Multiple.
  • Small Multiple - Added a parameter whether synchronize the values on X-Axis among the charts or not.
  • Bar / Line / Area Charts - You can now show the values in the plot area.
  • CSV Export: Added an option to select the separators.
  • Performance improvements - Chart / Pivot - Sampling data
  • Performance improvements - Data Import Dialog - It queries only 100 rows as default, which makes the iteration for testing out various queries much faster and more interactive.
  • Performance improvements - Google BigQuery - Now you can download the data via Google Cloud Storage. We have observed the performance improved from 40 minutes to 6 minutes or so for importing 1.5 GB data with our typical internet speed.
  • Data Import Dialog - You can now select which columns to import.
  • New Data Source: HP Vertica, Google Trend, Twitter Timeine.
  • MongoDB - Added a support for Fields (Projection), Sorting. Skip, and Limit (number of documents).
  • Data Wrangling Commands - Added remove_empty_rows, remove_empty_columns, clean_names (clean column names) functions from ‘janitor’ package.
  • Chart: Support configuring the number of decimal digits inside the chart.
  • Bar, Line, Area Charts: Showing Y values on Chart.
  • Line chart: fill blank as NA, 0, Previous, or Next values.
  • Chart: Added a property to show/hide function names (e.g. SUM) in Legend.
  • Share: You can now download csv data file on the chart / data shared pages.
  • OAuth Data Sources: You can cancel when you happen to close the OAuth web browser window without authorizing.

Bug Fixes

  • Small Multiple - Chart size didn’t fit into a window
  • Small Multiple - The charts were not sorted when it was Scatterplot.
  • Small Multiple - Scatter used to start from 0 for X/Y, now it’s automatically scaled.
  • Line chart - it was drawing lines even including the points where there is no data.
  • Line chart - it was not starting from 0.
  • Cholopleth - For US State map, changed the default to ISO2 letters.
  • Scatterplot - Use a random seed when needing to sample data.
  • Chart: Respect Ordered Factor’s level for sorting even when the data is numeric.
  • Note: Small Multiple was overflowing.
  • Table: Header and body were misaligned when adding a new transformation step on Windows.
  • Share dialog didn’t show up correctly from desktop’s ‘Add or remove user’ link

v 2.2

Released on 10/10/2016

New Features

  • Small Multiples - It is a series of charts each of which shows only a slice of the entire data with the same scale and axes. You can create Small Multiple by assigning a column to ‘Repeat By’.
  • Neo4J Graph Database support with Data Import Dialog. Now you can write Cypher query to extract data from Neo4j database.

Enhancements

  • Chart: Expanded View - You can now expand the chart view area by clicking an expand button at the right hand side top.
  • Copying Data Frame - You can copy an existing data frame along with the branches and the visualizations.
  • MongoDB - Authentication DB support - Added authSource parameter support.
  • Filter operation - Added “is stopword” and “is alphabet” to the operator.
  • Changed the icon for Showing/Hiding the left hand side tree. (List of data frames area.)
  • Added ‘list_concat’ function to either merge multiple list columns or concatenate multiple rows with ‘collapse’ argument. If you want to convert the list values as text then you can use ‘list_to_text’ function.

Bug Fixes

  • Fixed the command UI style for Windows.

v 2.1

Released on 9/29/2016

Enhancements

  • Database Tables List in Data Import Editor: You can see a list of database tables for Amazon Redshift, PostgreSQL, MySQL, Amazon Aurora database, and click to paste the table name into SQL Editor.
  • Chart: You can now pick from wide range of the color palettes even for Scatter, Cholopleth, Map, Heatmap, and Contour. Also, you can customize the color palette when it’s categorical (text column).
  • Chart: When you assign a numeric column to Color for Scatter and Map, you can set it to ‘As Numeric’ for treating as Continuous or ‘As Text’ for treating it as Categorical.
  • UI update for Association Rules (Market Basket Analysis). Add Include and Exclude option for slice
  • Add “not start with” and “not end with” in filter for character columns
  • Uptaken lubridate 1.6.0
    • add yq function
    • add parse_date_time in reference
    • add as_datetime function
    • remove parse_datetime and parse_date in readr package from reference
    • bimonth and halfyear support for unit argument
    • add quarter function
    • add as_datetime
  • “Cmd+ Enter” shortcut key support for running command when you are in Expression Editor (e.g. Mutate). You can always click “Enter” key in any dialog though.

Bug Fixes

  • Non-Latin1 characters are now handled correctly on Windows. Also, you can enter Non-Latin1 characters in commands like Mutate, Filter, etc, as well.
  • Duration type is now supported in Summary view.
  • In slice command, start and end wasn’t with braces correctly (ex. 2 as start and n()-1 as end, it was 2:n()-1 which was equal to 1:(n()-1) but now, it generates 2:(n()-1))
  • In command builder “Day, Month, Year, Hour, Minute, Second” should have generated “dmy_hms” but it generated “ymd_hms” function
  • In command builder “Concatenate items” is now “Convert to text” and generates “list_to_text”, not “list_concat”

v 2.0

Released on 9/21/2016

New Features

  • UI Assistant for dplyr - grammar based data wrangling and analysis commands
  • Support sharing of Chart and Data in a private mode.
  • Association Rules (arules) - using ‘arules’ package to calculate the association rules.

Enhancements

  • Pivot Table - Support of switching between Text / Numeric for Row - this will make the sorting better.
  • Chart: Multiple Y-Axis support - You can now add more than one column to Y-Axis.
  • Chart: Sorting for Bar chart - You can now control which Y-Axis column to use for the sorting and the order of the sorting between Ascending and Descending.
  • Note: Pivot support - Now you can embed Pivot Table inside Note.
  • URL related functions - Standardize the interface for URL text data wrangling related functions.

Bug fixes

  • Google BigQuery - Show more than 50 data tables

v 1.10.1

Released on 8/29/2016

Enhancements

  • Support SSL for MongoDB connection

Bug fixes

  • You don’t need to enter username/password for MongoDB when they are not set, typical for the local MongoDB setup scenario.

v 1.10

Released on 8/26/2016

New Features

  • The following window calculations are quickly accessible as part of Bar, Line, Area charts.
    • Running Total / Cumulative
    • % of Total
    • Difference from
    • % Difference from
    • Moving (Rolling) calculations)

Enhancements

  • Chart - Now all the layout related configurations (e.g. Title, Margin, Legend position, etc.) are managed in a single place, which can be invoked by clicking on ‘Layout’ button.
  • Chart - You can set the Legend position (right, left, top, bottom)
  • Chart - Area chart is stacked as default, which would give you a much better visual representation of the data.
  • Pivot Table - You can click on the column header to sort the data. This sorting also work on the shared Pivot Table at exploratory.io as well.

Bug fixes

  • Data in Legend was not respecting the sorting order that is set as Factor column. (Ordered Factor)

v 1.9.0

Released on 8/16/2016

New Features

  • Pivot Table - You can now use Pivot Table to summarize data quickly and spot patterns and trends by using color. Here is a blog post introducing Pivot Table.

Enhancements

  • Google Analytics - Goal Data Support - Now you can bring Goals related data by selecting the related dimensions and measures. This is useful to understand and analyze ‘conversion funnel’. Blog post
  • Highlight data frame names, which are joined to the currently selected data frame, in the left hand side pane.
  • Chart - it supports multiple color palettes when categorical columns (e.g. character) are assigned to Color. Also, you can customize the color palette using hex codes.
  • It shows the number of the returned data rows in Data Import dialog.

Bug fixes

  • Now you can import large data file even for Windows. Before this fix, it was throwing an error when trying to import large size data that was bigger than 2 GB, only for Windows.
  • Error validation for Branch name conflict used to close Branch name entry pop-up. Now it shows the error but you can still update the name in the same dialog.

v 1.8.0

Released on 7/29/2016

New Features

  • Support for Google Big Query Introduction
  • Support for Amazon Aurora Database

Enhancements

  • do_ngram function now takes sentence id and document id, both of which are always generated by do_tfidf function. This means you don’t need to run ‘group_by’ before building the ngram step. Also, it produces the ngram text in columns so you will need to use ‘gather’ command to make them into a single column. Detail
  • do_tfidf function now supports ‘norm’ argument that can be used to normalize the TF-IDF values. The default is L2. Detail
  • You can now use Cmd+Enter (Mac) or Control+Enter (Windows) to run the sql queries in Data Import dialog. MongoDB: Added help text for query

Bug fixes

  • Deleting a data frame with the mouse over delete icon deleted a transformation steps in the currently selected branch. -> Fixed.
  • You can download EDF (Exploratory Data File) with Multibyte characters now.
  • Now the data frame names are sorted by mix case (upper and lower cases) in the left hand side.

v 1.7.0

Released on 7/18/2016

New Features

  • Chart sharing with Data - You can publish and share your chart with Data Wrangling Steps now. This will make it easier for others to see how the data for the chart was prepared.
  • Chart sharing on Medium - You can copy and paste an URL of the shared chart into Medium blog post to embed an interactive chart.
  • Remote database connection - You can create ‘connections’, which has a set of the connection parameters, for your databases on the project list page and use them for multiple data frames. You no longer need to type the databases information for every single data frame!
  • Custom R functions and variables with R Script - You can register your own R scripts where you can define your R functions and attach them to your projects so that you can call the functions when you work with data. This can be used for defining your own variables as well.
  • Selective R package loading per project - You can select which R packages to load at the project level.
  • Custom Variable support for SQL query - You can use your own variables, which can be defined in R scripts, as part of your SQL queries.

Enhancements

  • Histogram - number of buckets parameter support - You can change the number of the buckets (bin) for Histogram chart.
  • Google Analytics - Page-nation support - You can extract more than 10K rows when there are more data.
  • Re-design for Data Import dialog - We have re-designed the data import dialogs. This is especially better for SQL query based data with much bigger text input area for writing SQL query.
  • Encoding support for Web Scraping - It will automatically detect an appropriate encoding, but this is heuristic, you can always override this by selecting the right one from the list.
  • Select R packages loading - You can select which R packages to load per project now.

Bug fixes

v 1.6.1

Released on 7/5/2016

Enhancements

  • Syntax suggestion supports new functions from dplyr 0.5 now.

Bug fixes

  • libPaths command in the generated R script is correctly escaped for Windows.
  • User added R packages will be added into the generated R script with library command.

v 1.6.0

Released on 7/1/2016

New Features

  • Data Share - Now you can publish and share your data at any step of the data transformation pipeline (right hand side) with a click of a button through Exploratory.io. The published data can be downloaded and imported into your project along with the data transformation steps so that others can understand how the data was prepared, can reproduce the data with all the steps, and can modify or add their own steps. This would make it easier for you to collaborate with your team members through data.
  • New remote data support - Redshift, PostgreSQL - Now you can write SQL queries to extract data from these two data sources, much like existing MySQL / MongoDB options.
  • Custom R package installation - Finally, you can install your preferred R packages inside Exploratory Desktop. In this release, the installed packages will be automatically loaded when you open the projects. In future release. you will be able to control this at each project level. Also, only CRAN repository is supported for this release, but Github support will be coming shortly.

Enhancements

  • ‘get_sentiment’ function has been refactored so that now it can return the sentiment for sentences, not just per word. The old version of ‘get_sentiment’ functionality is now provided through ‘word_to_sentiment’ function. The new ‘get_sentiment’ function uses sentimentr package internally, which provides a super fast sentiment scoring capability at the sentence level.
  • tidyr is upgraded to v0.5.1. The biggest new addition with this upgrade is ‘separate_rows’ function, which would separate delimited words into rows. Detail
  • dplyr is upgraded to v0.5.0. There are many enhancements and new functions with this release. Here’s the detail. Note that ‘distinct’ function has been updated to keep only the specified columns and this might break your transformation steps. You can bring those dropped columns back with ‘.keep_all=TRUE’ argument. Also, now column names with multibyte characters is supported in ‘mutate’ command. Great news for users in East Asia!
  • Reproducible! with R script generation - Now the generated R script contains all the core R packages with ‘library’ commands and ‘.libPaths’ command to set the library path to Exploratory repository. This will make it a lot easier to reproduce the transformation steps outside of Exploratory Desktop, such as R console, RStudio, etc.

Bug fixes

  • Chart - Now you can open Chart view even when an referenced column is not available after some updates in the previous steps.
  • Column names with Multibyte characters can be processed correctly with mutate / summarize commands now.
  • Now it shows up to 300 columns and 1000 rows in Table view correctly even when there are a lot more columns in the data frame.

v 1.5.2

Released on 6/20/2016

Enhancements

  • Updated all the machine learning functions spec, including text mining, statistical functions, to make them consistent.

Bug fixes

  • It was not showing an appropriate errors in Table / Chart views when invalid functions are used in the steps.
  • ‘build_kmeans.kv’ command was not augmenting the cluster IDs appropriately on top of the original data.

v 1.5.1

Released on 6/19/2016

Enhancements

  • Added a support of showing Text label on Scatterplot.

Bug fixes

  • JSON files are not showing up appropriately in the file picker for Windows.
  • Chart sharing is not fully working on Facebook.
  • Chart embedding’s iframe code doesn’t have appropriate height and width attribute setting.

v 1.5.0

Released on 6/16/2016

New Features

  • Chart Sharing and Embedding - Now you can publish charts directly from inside the data frame without creating a note. The hosted chart will have an unique URL and can be shared with the URL or embedded into your web pages or blog (e.g. Wordpress) with the automatically generated code. Also, you can share the chart URL on other mediums like Twitter, Facebook, Slack, etc, and the chart images will be automatically shown up. Blog post
  • Branch - You can create one or more branches inside the data frame to quickly experiment different analysis paths. All the branches inside a single data frame can share the common data transformation and analysis path in a main branch while they can have their own different analysis paths. Being able to run multiple experiments by creating multiple branches inside the data frames will enhance the flexibility and efficiency of your exploratory data analysis. Data dependency among the branches and among the transformation steps are managed by Exploratory’s DAG engine to keep all the data cache intact. Blog post
  • Text Analytics - We have added a set of the text mining related functions that are designed to work better with ‘tidy’ data form. By employing these functions, you can quickly tokenize text, remove stop words, stem words, construct n-grams, calculate TF-IDF and document similarity, reduce dimensions with SVD, and building document clustering models.
  • Added Short Cut Keys for the command input.

Enhancements

  • Chart: Support custom text entry for Title, X-Axis, and Y-Axis.
  • Windows: you can now scroll Table view vertically and horizontally by using the scroll bar as well as using touch pad.
  • Added %nin% (Not IN) operator so that you can use it in a condition (e.g. filter).

Bug fixes

  • Couldn’t tokenize data from Twitter by the sentence level. do_tokenize(text, token=“sentences”).
  • Had an error for publishing Note with many charts or Heatmap.

v 1.4.6

Released on 6/6/2016

Enhancements

  • Support ‘Refresh’ feature for local data types. Now you can click ‘Refresh’ link text at the top of Step to refresh even for the local file data type.
  • Support a custom install location for R and Git for Windows
  • Command builder for Tokenize Text, Get Sentiment. Now you can build commands for tokenizing the text data or score sentiments for the tokenized text from the column header dropdown menu.
  • Local Mongo db support without username and password

Bug fixes

  • Deleted projects don’t disappear untile restarting the app

v 1.4.5

Released on 6/2/2016

Enhancements

  • Support a dropdown selection to select a data frame for RDS data import.
  • Added ‘Get Data’ button for JSON data import dialog so that you can reload the file easily.

Bug fixes

  • The data doesn’t get refreshed even after re-selecting the local data file with a same name.
  • Chart: Data Popup - the color values are shown duplicated.

v 1.4.4

Released on 5/30/2016

Bug fixes

  • The download of R and Git didn’t start for Windows 7.

v 1.4.3

Released on 5/26/2016

Enhancements

  • Support a custom folder location for installing R packages other than the default of the Exploratory Desktop’s repository.
  • Proxy server support for authentication, downloading required software, and R connections. It now detects it automatically. When it requires username / password, users can add them into a configuration file. See FAQ for the detail.
  • CSV / Delimited Files Import: Supports non-American number formatted data with the new parameter setting for decimal and thousand marks.

Bug fixes

  • Get stuck with white screen or loading UI after the initial launch of the app.
  • Can’t open a project when my home directory path had a space.
  • Chart: Can’t assign non-ASCII characters in the column names to X/Y-Axis, Color.
  • Chart: Boxplot doesn’t render when the column assinged to X-Axis has NAs.

v 1.4.2

Released on 5/26/2016

New Features

  • Text data wrangling with the tidytext package, which makes it easy to work with text data in a tidy format. With this tidytext package introduction, we are introducing unnest_tokens and pair_counts functions from the tidytext package as data frame level functions and get_sentiment and get_stopwords functions from the exploratory package as mutate / filter level functions.
  • Introducing ‘ip_to_country’ function from the rgeolocate package to convert from IP addresses to country names.
  • Introducing ‘countrycode’ function from the countrycode package to map among all the combinations of country names and country codes including ISO2 and ISO3 letters and numbers.
  • Introducing ‘calc_cor_cat’ function from the exploratory package to calculate correlations between all the combinations of category column values based on a tidy data. There is also another function ‘calc_cor_var’, which calculate correlations between all the combinations of a given set of columns (variables).
  • Introducing a new chart type ‘Choropleth - Map’ which would visualize the data based on either US State names or World country names.

Enhancements

  • Chart: Support continuous values (numeric data type) for Color for Scatterplot chart.
  • Now the generated R script include R script when the data is ‘R Script as Data’
  • Table: Now it can show all the columns even when there are more than 100 columns.
  • Support the syntax suggestion for building formula for lm() and glm() functions.

Bug fixes

  • REST API Data Source: Now it can bring all the elements even when there are more than 50 items.

v 1.4.1

Released on 5/16/2016

New Features

  • Introducing the broom package’s tidy / glance / augment functions as data wrangling grammar
  • Support ‘model’ and ‘source data’ type columns so that you can build models with functions like do_lm, do_glm, do_kmeans, and store them inside the data frame. This makes it possible to call broom’s tidy functions to access the models’ statistical summary information or augment their scored data with the original data columns.

Enhancements

  • Installer: It checks if Git is installed under /usr/bin and /usr/local/bin. Unless it’s older than 2.0 it won’t try to install or upgrade. Please check FAQ page for the detail on the version check logic and requirements for both R and Git.
  • Installer: It will install required R packages into Exploratory’s repository location, instead of into the R’s system location.
  • Chart: Heatmap / Contour - introducing an option to choose whether NA as NA or zero.
  • Chart: You can add margin (space) at X-axis and Y-axis so that text label can be showing up better.
  • Improvements for model building and inspection for Linear Regression (lm), K-means clustering (kmeans), and Generalized Linear Regression (glm).
  • Table: You can select # of rows to display in the table. The options are 200 (default), 500, 1000.
  • Excel Data: It shows a dropdown list so that you can select a sheet name instead of needing to type the name.
  • Text File (Delimited / CSV) Data: You can select “.csv”, “.text”, “.txt”, “.tsv”, “.tab” file types in File picker now.

Bug fixes

  • R Script Data - couldn’t click Enter key to add a new line.
  • Table: Row highlight (gray color band) was staying even refreshing table view - Done
  • Syntax Suggestion: Instead of select minus ’-’ from the suggested list, when you typed minus ‘-’ in select() command it didn’t show a suggested list of the columns.

v 1.4.0

Released on 5/9/2016

New Features

  • Support Correlation calculation with Base R (stats pkg) cor() function.
  • Text Matching function - str_count_all
    Note that this is not from ‘stringr’ package.
  • Twitter Search Data Support
  • Added Heatmap and Contour chart types

Enhancements

  • Clustering function improvement
    Now you can specify which columns to use for building the clustering with Base R (stats pkg) kmeans() function.
  • Scatter plot: the circle sizes are now scaled better based on the values assigned to Size shelf
  • Local data types are organized and presented better in Data Import Dialog
  • Syntax Suggestion: Now it supports mutate_each / summarize_each functions with funs() for the syntax suggestion and help.
  • Syntax Help: the help text and table are formatted much better now.
  • Command builder menu for the following data types are supported. : difftime, interval, time, period
  • Hot Key support - ‘Return (Enter)’ key can be used instead of clicking on OK button (e.g. Login UI, Create a new project dialog, etc)
  • Table: You can click rows to highlight now.
  • Chart: Line chart used to be starting from the minimal value on Y-axis, but now it starts from 0 just like Bar chart.

Bug fixes

  • Can’t create a new project or open an existing project in some conditions.
  • Can’t create a new project when Microsoft R Open is installed.
  • Throwing an error when importing data after having a problem creating projects.
  • Couldn’t start the app on some Mac PCs.
  • Selecting text in Command Input Area was unstable, now it’s much better.
  • Column names with backticks were not highlight-ed in Command Input Area.
  • ‘Get Data’ button will show Table view instead of Raw data for Text files.
  • Suggestion list doesn’t show up after manually typing minus ’-‘.

v 1.3.0

Released on 5/2/2016

New Features

  • Data Wrangling Command Auto Builder
  • MySQL database support
  • Fast Data Parsing functions (readr) support
  • Time data type support with parse_time (readr) function
  • Text clean up function - str_clean - support

Enhancements

  • Google Analytics: View ID dropdown menu picker support
  • Google Analytics: Switch Account support
  • Google Spreadsheet: Switch Account support
  • Google Spreadsheet: Added File import parameters
  • Google Spreadsheet: Spreadsheet name dropdown menu picker support
  • Chart: Text Label field support for Map and Scatterplot

Bug fixes

  • JSON import: Updating with a different file doesn’t replace the original one in Preview UI

v 1.2.2

Released on 4/26/2016

New Features

  • Remote JSON - REST API Basic

Enhancements

  • Google Analytics - Dynamic LOV for View ID

Bug fixes

  • Issue: Clicking on a project is opening a wrong project
  • Web Data Scraping: Clicking on some tables from some web pages causes the dialog to hang
  • Support login to Exploratory Desktop with Email address, not just username
  • Map: Taking color assignment off causes no data to be displayed in Map.

v 1.2.1

Released on 4/18/2016

New Features

  • Web Scraping Data
  • Remote JSON - REST API Basic
  • Remote Data - MongoDB

Enhancements

  • Google Analytics Enhancements - Dimensions and Metrics List
  • Chart Rename / Delete support

Bug fixes

v 1.2.0

Released on 4/11/2016

New Features

  • Refresh remote data
  • Data Wrangling script download (dplyr)
  • Function list dialog
  • Data Source Plugins

Enhancements

  • Show space and special characters for Table view

Bug fixes